Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.2 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹15.5 L+₹5,917 (0.38%)Rejected-Finance VPO SARNA STATION PATHANKOT 145 025 PB | PATHANKOT | PUNJAB | 145025 | L2 | Rejected-Finance Second Lowest | |
| 3 | L3₹15.8 L+₹31,148 (2.02%)Rejected-Finance | L3 | Rejected-Finance Third Lowest | |
| 4 | L4₹16.3 L+₹87,184 (5.64%)Rejected-Finance | L4 | Rejected-Finance Fourth Lowest | |
| 5 | L5₹16.9 L+₹1.4 L (9.24%)Rejected-Finance | L5 | Rejected-Finance Fifth Lowest |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
8 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S N Gaikwad
Holta Cantt Palampur
WELCOME MAINT AND PERIODICAL SERVICES TO OFFRS MD ACCN AT PALAMPUR MIL STN
2023_MES_595546_3
GEP-22/2023-24
Open Tender
Civil Works
Item Rate
330 days
Palampur Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
GE Palampur
₹40,000
23 Sept 2023
18 Jul 2023
10 Aug 2023
18 Jul 2023
8 Aug 2023
25 Jul 2023
Amount
SCHEDULE 'A' PART-I M&L for preparation of old plastered/ unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing, complete all as specified and directed.
M&L for preparation of old plastered/ unplastered ceiling surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of white washing, complete all as specified and directed.
M&L for preparation of old plastered/ unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of distemper oil emulsion, complete all as specified and directed. Note : - 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L for complete removal of existing treatment by mechanical means and preparation new wall surface and applying two coats of distemper oil emulsion, complete all as specified. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L for applying a coat of 2mm thick layer wall putty over wall primer, complete all as specified and directed.
M&L for preparation of old plastered/unplastered wall surface including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint upto 15m height, complete all as specified and directed. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L preparation of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L preparation of old painted wood or wood surfaces of any description not otherwise described and surface not exc 10 cms width or girth including preparation of surface and applying one coat of synthetic enamel paint on wooden surface complete all as specified and directed. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L preparation of old painted steel surfaces of doors/windows/railings/ CGI sheet over roof or any description not otherwise described over 10cms width or girth including preparation of surface and applying one coat of synthetic enamel paint, complete all as specified and directed. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L for applying two or more coats of 100% Premiium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance, dirst resistance exterior paint or required shade (Company Depot Tined) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over old surfaces complete all as specified and directed. Note:- 25 % of material shall be deposited in MES store at every qtrs before commencement of works and shall be issued to contractor as per requirement.
M&L preparing wood surface for varnishing incl cleaning and stoping and applying one coat of liquid transparent wood filler and finishing with a varnish coat complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.
Dismantling timber scantlings 40Sq.cm and over in section, in any position framed or unframed work etc., complete all as specified and directed.
Dismantling timber scantlings like fillets,rails, posts,rafters,purlins,etc under 40Sq.cm in section, in any position complete all as specified and directed.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius built in Cement mortar 1:6, complete all as specified and directed.
M&L Brick work with sub class 'B' bricks, straight or curved on plan, to any radius, in half brick thick wall, using old size brick, built in cement mortar 1:4, complete all as specified and directed
M&L for plain fillets, square rectangular or triangular in section, wrought, bull nosed, splayed, chamfered or rounded on one edge or face, secured with nails or brad, 2nd class soft wood (kail) sec area exc 6 sqcm but not exc 13 sqcm as in cover fillets, complete all as specified and directed.
S&F 2nd class soft wood plain, solid, straight chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, with one or more rebates complete all as specified and directed.
S&F 1st class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc.edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part 1) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 30mm thick flush shutters, covered with decorative face veneer both faces, solid core construction, with block board core, commercial type complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each and removing from site, complete all as specified and directed.
Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.m each, complete all as specified and directed.
Taking down shutter of any description n. exc 1 sqm and removing from site. complete all as specified and directed.
Taking down shutter of any description exc 1 sq.m but n. exc 2 sq.m each. complete all as specified and directed.
Refixing shutters including taking down, easing and ajusting and also refixing builders hardware as required including renewal of unserviceable screws etc of any description not exc 1.00 Sqm each in same opening complete all as specified and directed.
Refixing shutters including taking down, easing and ajusting and also refixing builders hardware as required including renewal of unserviceable screws etc of any description exc 1.00 Sqm and not exc. 2.00 Sqm each in same opening complete all as specified and directed.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the frnt face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.
S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 250 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
S&F 18/19mm thick prelaminated particle board/ MDF board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete as directed by Engineer-in-charge.
S&F mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 30mm, complete all as specified and directed.
S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F aluminium handles, cast type, anodised of size 150 mm long, complete all as specified and directed.
S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished, fixed in repair, complete all as specified and directed.
S&F hasp and staple (Safety type) aluminium anodised including bolt to hinge plate and fixed with screws, 100mm size, complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
M&L for welding in repairs n.exc. 2.5 cm in length and n.exc. 6mm thick, complete all as specified and directed.
S&F for 4mm thick non-asbestos fibre cement board, ISI marked, fixed to timber frame works as in ceiling, flat or sloppy, as per manufacture's instructions, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Non-skid, joint free (edge cut) coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile not exc 0.18 sqm as in vertical surfaces such as skirting/dado etc. set and jointed in neat cement slurry, pointed in white or coloured cement to match the shade of tiles, 10mm thick rendering in cement mortar 1:4 complete all as specified complete all as specified and directed.
M&L Non-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm/450x300x7mm/600x300x7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed.
M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM 1:4 complete all as directed by Engineer-in-charge.
M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular polished, area of each tiles not exceeding 0.36 Sqm as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry, pointed in white or coloured cemnt to match toe shade of tiles, with and including 10mm thick rendering in cement mortar 1:4 complete all as directed by Engineer-in-charge.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises and leaving the work clear of any plastering complete all as specified & directed.
M&L 15mm thick rendering on fair faces to brick work or stone masonry surface in CM 1:6 finished the surface even and smooth (without using extra cement) on internal wall surface, complete all as specified.
M&L 15mm thick rendering on fair faces to brick work or stone masonry surface in CM 1:4 finished the surface even and smooth (without using extra cement) on internal wall surface, complete all as specified.
Rendering 10mm thick plaster on fair faces of concrete surfaces as in facia or ceiling in cement mortar 1:3 finished even and smooth without using extra cement, complete all as specified and directed.
M&L distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gm/litre of approved manufacturer of required shade and colour complete as per manufacturer's specification two or more coats of new work including preparation of surfaces with JK/Birla wall putty complete 2mm thick complete all as specified and directed.
M&L applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and Uv resistance as per IS 15489: 2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90/10 sqm over new surfaces complete including preparation of surfaces of wall by complete removal of existing treatment complete all as specified and directed.
M&L preparation of new untreated surface of ceiling ceiling surfaces and apply three coats of white wash complete all as specified and directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc. 0.5 sq.m in each pane complete all as specified and as directed.
S&F for 3 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.
Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer, complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connection, including cleaning for refixing or removal from site ,complete all as specifed complete all as specified and directed.
S&F steel water tubing, 15mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc , complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connection, including cleaning for refixing or removal from site complete all as specified and directed.
S&F steel water tubing, 20mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc , complete all as specified and directed.
S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with quater turn flange, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.
S&F in repairs centre hole mixer, long neck cast copper alloy, with capstan head, brass chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe 15mm bore complete all as specified and directed.
S&F in repairs brass chromium plated mixer for mixing hot and cold water, screwed down for iron pipe for 15mm dia bore pipe complete all as specified and directed.
S&F in repairs 15mm bore stop valves/angle cock (two way if required), cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.
S&F in repairs 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with long shank and cup (concealed type) screwed both ends for iron pipe or union complete all as specified and directed.
S&F in repairs 20mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.
S&F in repairs PVC connection suitable for 15mm pipe with PTMT nuts and washers for both ends of length 450mm long complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, fixing to steel pipe or union complete all as specified and directed.
S&F in repair vitreous china squatting pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, provn of lime concrete and jointing to flush pipe, complete all as specified and directed.
S&F in repair vitreous china coloured wash down water closet pan (Padestal Pattern), including connection to flush pipe, 'P' or 'S' trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device (excluding flushing cistern and flush pipe), complete all as specified and directed.
S&F in repair 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends, complete all as specified and directed.
S&F in repair Viterous china, wash hand basin, (white) of size 550 mm x 400 mm including brass CP waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends complete all as specified and directed.
S&F in repair wooden boarding of 2nd class softwood clean sawn boards or planks, having thickness 20mm, fixed with screws to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc complete all as specified and directed.
S&F for Jet for pedestal pan, chromium plated with flexible pipe of 90 cm in length (fixed in repair) complete all as specified and as directed
S&F for Health Faucet for WC of any description, brass chromium plated with flexible pipe of 90 cm in length (fixed in repair) complete all as specified and as directed by Engr-in-charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
S&F 6mm thick E-board (Classic) false ceiling of size 610mm x 610mm fixed with aluminium snap grid frame work of same size as aluminium tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium tee as cross runner and aluminium angle of size 25 x 25x 1.25mm at the perimeter, including GI adjustable spsender of required length, including dismantling of odl ceiling, complete all as specified.
Removing of existing filling in sunken floor of WC and repair to sunken floor (any size) with 15mm thick plastering in CM 1:3 of internal surface with WPC, than painting with bitumen 30/40 over a coat of bitumen primer, putting 150 micron polythene and testing to water tightness then filling with PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate and inserting 40mm bore 70cm long GI water tubing to the wall complete all as specified and directed. Note: EWC & tiles shal lbe measured and paid separately.
S&F PVC bath cabinet of size 450x450mm (minimum) with sliding/ openable mirror built in PVC shelves, complete of approved make (fixed in repair), complete all as specified and directed.
S&F in repairs PVC coated mild steel conduit pipe 25mm dia (Drapery rod) with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows (each opening not exc. 1.50mtr, contained with a pair of clamps and a pair of side ornamental attachments) complete all as specified & directed.
S&F 18/19mm thick prelaminated particle board/ MDF board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete as directed.
S&F auto closing hinges 35mm of 0 degree crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed.
S&F ball bearing runners 45mm telescopic (KTS-20) full extension load capacity 50 Kg fixed in repair complete all as specified and directed.
S&F stainless steel handles 100mm size for kitchen cabinet shuttersfixed in repair complete all as specified and directed.
S&F in repairs chromium plated stainless steel wire basket (storage basket) pull out type for large utensils 480 x 500 x 150mm of Grade 304 with necessary fixing arrangements complete all as specified and directed.
S&F in repairs chromium plated stainless steel wire basket (cup and saucer basket) pull out type for large utensils 380 x 500 x 100mm of Grade 304 with necessary fixing arrangments complete all as specified and directed.
S&F in repairs chromium plated stainless steel wire basket (Plate basket) pull out type for large utensils 380 x 500 x 100mm of Grade 304 with necessary fixing arrangements complete all as specified and directed.
S&F in repairs chromium plated stainless steel wire basket (Cutlery basket) pull out type for large utensils 380 x 500 x 100mm of Grade 304 with necessary fixing arrangements complete all as specified and directed.
Demolition reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided as in RCC Jalies, louvers etc. and similar suspended work and removing from site as approved complete all as specified and directed.
M&L 35mm thick pre cast cement concrete louvers and jallies 1:2:4 type B0 using 12.5mm graded stone aggregate (measured solid) including all mounding but excluding frame and set in CM 1:4 as approved complete all as specified and directed.
S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing unserviceable water tank complete all as specified and directed.
S&F 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing unserviceable water tank complete all as specified and directed.
S&F in repairs Aluminium(extruded section body) body Door closer hydraulically regulated, designation No3,universal type,suitable for shutters of 851 to 1000 mm in width and of weight between 61to 80 Kg complete all as specified & directed.
SCHEDULE 'A' PART-II Taking down old unserviceable copper/ aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including PVC casing and caping medium grade, ISI marked including pressed steel wire existing colour terminated boses of Modular Metal flush boxes on any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc complete all as specified and directed for the following:- (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof/ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.
All as per the description of serial item No 100 here-in-before but 6 amp socket outlet on same board complete all as specified and directed.
All as per the description of serial item No 100 here-in-before but socket outlet 6 Amps independent board with cables 1.5 Sqmm complete all as specified and directed.
All as per the description of serial item No 100 here-in-before but for one 6 pin socket outlet 15/16 Amps on independent board with cables 4 sqmm size complete all as specified and directed.
S&F ceiling rose, 3 terminal surface type complete all as specified and directed.
S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F bell, AC 230 Volts, single pole complete all as specified and directed.
S&F switch piano, flush type single pole one way 6 Amp, 240 volts ISI marked complete all as specified and as directed.
S&F modular bell push 6A 1 module 240 volts ISI marked complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin, 6 A complete all as specified and directed.
S&F socket outlet 3 pin, 6/16 Amp, flush type, 240 Volts, 6 pin flush type complete ISI marked complete all as specified and directed.
S&F switch piano, flush type single pole, one way 16 Amps, 240 volts ISI marked complete all as specified and directed.
Taking down old unserviceable, S&F modular switch 1 way 6 A, 1 module 240 volts ISI marked complete all as specified and directed.
Taking down old unserviceable, S&F modular switch 1 way 16 A, 1 module 240 volts ISI marked complete all as specified and directed.
Taking down old unserviceable, S&F socket, 6A-2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.
Taking down old unserviceable, S&F socket, 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.
Taking down old unserviceable, S&F modular fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed.
Supply & fixing surface /wall mounted light fitting pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make:- Cat Part No for batten:- STREAKT8UPTO 1X22WSSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved. Cat Part No for Tubelight:- PHOTANULTRAE2.0 1213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LED tube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved
Taking down old unserviceable, M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed. Note: Distribution board and MCB's should be same make or as approved by GE.
Taking down old unserviceable, M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed. Note: Distribution board and MCB's should be same make or as approved by GE.
Taking down old unserviceable, M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed. Note: Distribution board and MCB's should be same make or as approved by GE.
Taking down old unserviceable, S&F 240V, 10 KA 'B' curve MCB SP and current carrying capacity 6 to 32 amps, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Taking down old unserviceable, S&F 240V 10 KA 'C' curve MCB SPN and current carrying capacity 40 to 63 amps, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Disconnecting water heater and taking in safe custody/refixing the same with making the connection and testing complete all as specified and directed.
Taking out old unsv and S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed.
Taking out switch board with electrical fittings & refixing the same after civil work complete all as specified and directed.
Taking down old unsv laminated sheet cover of any size and supply and fix 3mm thick plastic laminated sheet cover of suitable size for the existing fitting and fixtures complete all as specified and directed.
SUBASH MAHAJAN
M/S ER CONSTRUCTIONS
M/s ASS Construction Co
M/S JATINDERA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .