Restoration of rain damages LIS Shamshi Phase Ist in Tehsil Bhuntar Distt. Kullu H.P

Providing and fixing of Monoblock pumping set of 10HP (KSB/ KALAMA/Kriloskar/ Johnston/Cromption/BS) make confirming to BIS:- 8034-1976 latest suitable for lifting clear water (latest with upto date ammendments) fitted with bronze impellers/suitable alloy directly coupled to squirell case electric induciton motor of same make as (manufacturer standard) confirming to BIS; 9283-1979 (latest with upto date ammendments) and totally water proof for submersible duty, isolated from the pump by intermendiate casing with double mechanical seal in oil chamber, grease packed lubricated bearings and provided with stainless steel thrust bearing plate to with stand vertical locads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor including water level guard, errection clamps,cable clops and epth guage etc. The power of electrical motor should be atleast 10% in access of the maximum power required by the pump in the operation range of (+10% and -15%) of the duty point head. The motor confirming to minimumIE 2 norms IS-12615/2011 with upto date ammendments it should include cost of bearing nuts, bolts and poiting etc complete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer-in-charge Total Head = 15 mtr. Discharge = 30 LPS.

Providing and fixing Suction pipe 150 mm dia of standard make within all leads and lifts to the entire satisfaction of the Engineer-in-charge.

Providing and fixing Foot Valve 150 mm dia of standard make within all leads and lifts to the entire satisfaction of the Engineer-in-charge.

Providing and fixing Foot Valve 100 mm dia of standard make within all leads and lifts to the entire satisfaction of the Engineer-in-charge.

Providing and fixing of starter (direct on line) of 5HP ( MU G20HS smart controller FASD) of standard make such as L&T/MEI/Havels/AVON/Crompton/ Asian for above pump set with suitable capacity installed on a wooden switch board fixed on a wall capable of mounting a voltameter 0 to 300 volts capacity and ampere meter of capacity 0 to 150 ampere of of reputed make complete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer-in-charge

Providing and fixing of water proof PVC cable3 core, 6 sqmm as per IS -674 part-II 1964 suitable for above pump set from starter to pump set subject to the approval of HPSEB authority complete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer-in-charge.

Providing and fixing of water proof PVC aluminium armoured cable 4 core, 16 sqmm as per IS -674 part-II 1964 suitable for above pump set from starter to pump set subject to the approval of HPSEB authority complete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer-in-charge.

Excavation in foundations, trenches etc.in all kind of soil in all leads and lifts such as pick work, jumper work in saturated/unsaturated soil including bailing out water, blasting work in hard/ soft rock or chiseling in hard/soft rock where blasting is prohibited in all lifts stacking the excavated earth not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of each deposited layer by ramming and watering and then disposing of all surplus excavated earth foundations etc., consolidating as directed within all leads and lifts and handing over the useable materials available from excavation to department free of cost complete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer-in-charge

Providing and laying cement concrete 1:4:8 ( 1cement:4 sand: 8 graded stone aggregate 40 mm nominal size )and curing complete excluding the cost of form in foundation and plinth complete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer-in-charge

Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and re-inforcement for reinforced concrete work complete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer-in-charge

Foundations, footings, bases of columns and the like and mass concrete.

Wall ( any thickness but not less than 0.10 mtrs. Thickness) including attached pillasters buttresses, plinth and string courses etc. from top of foundation level upto floor two level.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for in situ reinforced concrete and plain concrete work complete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer-in-charge

a)Vertical surfaces such as walls (any thickness)portions and the like including attached pilaster buttresses plinth and string course and the like

Steel work welded in built up section trusses and frames work i/c cutting hosting fixing in position in Grating ,Framed, Guard, Bars, Railing and Similar work complete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer-in-charge