Facelifting of Plant Entrance Area at HWPM Phase-I

Amount

Supplying and filling coarse river sand of approved quality in foundations, plinth, under floors, pavements etc. including leveling, watering, ramming, etc. complete as per specifications and as directed by the Engineer.

Providing and laying plain cement concrete of 1:3:6 (1 ordinary portland cement : 3 coarse sand : 6graded stone aggregate 40 mm nominal size)in foundation and plinth, under floors, pavements, footings, pedestals etc. excluding centering and shuttering, spreading, leveling, ramming, finishing, curing etc. complete as per specifications and as directed by the Engineer-in-charge.

Providing and laying plain cement concrete of 1:2:4 (1 ordinary portland cement :2 coarse sand : 4graded stone aggregate 40 mm nominal size)in foundation and plinth, under floors, pavements, footings, pedestals etc. excluding centering and shuttering, spreading, leveling, ramming, finishing, curing etc. complete as per specifications and as directed by the Engineer-in-charge.

Providing and laying40mm thick plain cement concrete flooring of grade 1:2:4 [one cement, two sand and four aggregate] using 20 mm nominal size stone aggregate and finished with a floating coat of neat cement, laid in panels as directed to required level and slope including provisions of chequered finishing, curing etc. complete as per drawings specifications and as directed by the Engineer-in-charge.

Providing and laying in position 1:1.5:3 grade cement concrete for reinforced cement concrete work with ACC/Ultra tech/Birla/Jaypee cement 43 grade , using cementious content as 400 kg with cement flyash ratio of 60:40 (60% cement : 40% fly ash, flyash available free of cost at plant but transporting by contractor); minimum cement content excluding fly ash should be 240kg/cum; including transportation, centering, shuttering, making opening wherever required, finishing , compacting, levelling, curing etc excluding the cost of reinforcement which will be paid seperatly under relevant item. all complete as per specification and as directed by the Engineer.

Providing and fixing of pre cast reinforced cement concrete covers including the cost of reinforcement with 10mm dia HYSD bars @ 150 MM C/C, including shuttering, finishing with neat cement punning on exposed surface with 1:2:4 ( 1 Cement : 2 Coarse sand : 4 graded stone aggregate 12.50mm nominal size) including transporting, placing, compacting, curing etc. complete as per drawings, specification and as directed by the Engineer-In-Charge.

Providing and laying half brick masonry with Flyash lime brick masonry of class 10 designation in CM 1:4 (1 cement : 4 coarse sand) in super structure including curing, provision of scaffolding etc. complete as per specifications and as directed by the Engineer.

Demolishing Brick Masonry/concrete work including removing and disposing the dismantled material at designated places and stacking of serviceable materials all complete as per specification and as directed by the Engineer-In-Charge.

Concrete

Lettering with stickering on boards by buffing the entire old board and applying primer on the board and providing base stickering on the board and letter writing with stickering in three languages.

Providing and fixing precoated galvanised iron profile sheets at all heights (size, shape and pitch of corrugation in curvature including crimping to suit existing shape as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x 55 mm) with EPDM seal, or fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers along with wind ties complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. complete as directed by the engineer

Providing and laying Chequerred precast cement concrete tiles 22 mm thick Medium shade pigment using 50% white cement 50% Grey cement in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand),curing etc.coplete as directed by the engineer in charge.

SHRAVANI CONSTRUCTIONS

M/s MEERAIAH CONTRACTOR