Providing of PVC pipe line and Const of RCC HRP canal network from main road to Dhangarwada at Kopardem LI Scheme in Sattari Taluka

Amount

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. a) All Kinds of soil

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Centering and shuttering including struttings, propping etc. and removal of formwork for : Foundations, footings, bases for columns and mass concrete.

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: All works upto plinth level

Supplying at store or site of work Rigid PVC (SEL FIT) pipes for public water supply including Railway freight, carting, loading and unloading, stacking, transit insurance etc. complete, Conforming to IS: 4985-2000, and bearing ISI mark, Class 10 kg/cm2.WITH EXCISE DUTY Outer Dia in mm f) 160

Jointing of rigid / SEL FIT PVC pipes by cleaning the pipe with solvent cement including the cost of solvent cement and hydraulic testing of joints etc. complete as per IS:7634-1975 Part 3, including hydralic testing of joints as directed by the engineer incharge.

Laying in position and jointing true to line and level R C C half round pipe with cement mortar 1:2(1 cement:2 fine sand) including cleaning if any,curing etc.complete as per the direction of engineer in charge. a) 450mm dia HRP

Conveying carefully from stack at site, 250m from both sides rolling and lowering into trenches, laying and jointing true to line and level, RCC spun pressure and non pressure pipes of various classes, specials including collar and perfect linking of joint with jack to correct position including cost of jointing material in cement mortar 1:2, necessary hydraulic testing, curing of cement mortar etc. complete. 350mm

Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Sluice valve conforming to IS:14846-2000 and bearing ISI mark double flanged/plain ended with cap. TYPE P.N. 1.6 (Class B ) Dia in mm f) 150

Hosting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I Nominal diameter in mm. d) 150

Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion, nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and bolts,as directed by the engineer incharge. Nominal diameter in mm. d) 150

Supplying and fixing of M.S. gates made out of 5mm thick plate,equal angle of size 40 x 40x5mm. & stiffener whenever required including cutting,hoisting,transportation applying a primary coat & two coats of anticorrosive bitumetric paint etc. as per drawing & as directed by the Engineer in Charge.

Vinayak Naik and Associates