DEPOSIT Design, Manufacture, Supply, installation, trial running and commissioning of 0.50 MLD IRON Removal Plant,Pressure filter and all connected works in Pump Houses at Ward no.10 of AlappadGP

Amount

Working charge

OD137409/2024-2025:Design, fabrication, supply, installation and commissioning of Iron Removal plant including Civil Work, RCC Platform(o.5 MLD) Pressure sand filter for fully automated Pump house including Civil Work, RCC Platform (0.5MLD) Plant interconnecting with GI pipe, specific flow rate 30000 LPH,MS Epoxy Coated,Vessel Dia 1200mm, Vessel HOS 2200mm, Media.,Filtering Sand (White Sand), Purolite Mz10 (700 kg), Iron Removal Media- Everzit N (300 Lr), Shell Thickness 8mm, Dish End Thickness 10mm, 80mm CI valves, Motorized Dosing System (0.25 to 0.5 HP) for Chlorine Dosing automatic operation, PLC Controlled Electrical panel with touch screen HMI, and 2 nos of Air compressor with 2 years warranty period etc. working automatically rinse and back wash the filter when there is a pressure difference across the filter with out causing any damage to the pumpset and tube well.

OD137410/2024-2025:Supplying Electrically operated brand new submersible pump set (KWA approved brand) suitable for bore well of size 200 mm diameter without accessories having discharge suitable of with iron removal plant obtaining efficiency against a total head of 90 to 110 m (suitable for the working of pressure filter with iron removal plant in the tubewell) with delivery head size 65/80 mm with minimum efficiency of 70% suitable to couple electrical motor AC 400/440V, 50 cycle as per IS specifications the cost including all taxes , duties, conveyance charges etcType - Submersible pump set (KWA approved brand)Discharge up to - 400 lpm ,Head - 110 mtr., Delivery size - 65mmImpeller - Bronze, Shaft - Stainless steel.with one year warrenty.

OD137411/2024-2025:Supply of 80mm GI CLASS B pipe (Medium)

OD137412/2024-2025::Lifting and erection of 7.5/ 10/ 12.5/ 15 HP submersible pump set including lifting of pump set from tube well after disconnecting all wires and cables, separating the delivery pipes and valves from the vertical column pipes, cutting the MS flats welded across the joints, lifting the column pipes one by one, stacking it in convenient place as per direction, decoupling the pump and motor, dismantling the pump set and detecting the fault, resetting back etc. and erecting the standby pump set into the tube well after coupling the pump and motor including erecting the column pipes one by one, welding MS flats across the joints, coupling the delivery pipes and valves to the vertical column pipes, connecting motor to starter after connecting all wires and cables etc. complete.

MS ENGINEERING AND CONTRACTORS (BID ID -2417234)

Bidder Name

SAHAD N

MS ENGINEERING AND CONTRACTORS