Delhi

Active

Works

Electrical Works

Maintenance of Street Lights, High Masts on Delhi PWD Roads under PWD M-South Division during 2026-27.

Public Works Department

New Delhi | South East Delhi, Delhi

Amount: ₹32.5 LCloses: 29 Sept 20262d left

Timeline

Published23 Sept 2026
Closes29 Sept 2026
Bid Opening29 Sept 2026

Tender Value

₹32.5 L

EMD Value

₹65,007

Closing Date

29 Sept 2026, 3:00 pm2d left

Tender Inviting Organisation

Name

Executive Engineer (E)

Address

O/o The Executive Engineer (E) South Elect. Div., PWD, Sukhdev Vihar, Mathura Road, Near Okhla Flyover, New Delhi

Work Description

SITC of Street Light Pole along with LED fittings i/c Providing and Laying of UG Cables at Devli Road Under M-South Division

Tender Information

Tender ID

2026_PWD_298856_1

Reference Number

73/EE(E)/EMD South Elect. Divn./PWD/2026-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Works

Period of Work

60 days

Location

New Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

13 documents required · 13 mandatory

Fee/PreQual/Technical

RequiredEarnest Money as per NIT (.pdf)

Requiredb) Receipt of deposition of original EMD issued from division office of any Executive Engineer, PWD/ (.pdf)

Requiredc) Valid Electrical License OR UNDERTAKING (.pdf)

Requiredd) Certificate of Registration for GST and acknowledgement of upto date filed return. (.pdf)

Requirede) Scanned copy of valid PAN Card as issued by the Income Tax Department. (Required from both CPWD R (.pdf)

Requiredf) Affidavit on Non Judicial Stamp Paper of Rs. 100 as per Form-E (Required from both CPWD and Non) (.pdf)

Requiredg) CPWD Registration OR certificate in list of MES BSNL and other OR Work Experience certificate in (.pdf)

Requiredi. Scanned Copy of Letter of Transmittal. (For Non Registered Contractors only) (.pdf)

Requiredii. Annual financial turnover statement of minimum 30 of estimated cost (For Non Registered Contrac (.pdf)

Requirediii. Loss and Profit statement during the last five years (For Non Registered Contractors only) (.pdf)

Requirediv. Solvency of minimum 40 of estimated cost OR Net Worth certificate (For Non Registered Contractr) (.pdf)

Requiredv. Affidavit on Non Judicial Stamp Paper of Rs. 100/- as per Form-F. (For Non CPWD Contractors ) (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹65,007

Important Dates

Last Activity

23 Sept 2026

Published

23 Sept 2026

Bid Opening

29 Sept 2026

Download Starts

23 Sept 2026

Download Ends

29 Sept 2026

Submission Starts

23 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (33 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying & erection of flange mounted hot dip galvanized octagonal poles of 7 mtrs. height made from 3 mm thick HR Steel plate having bottom dia of 130 mm & top dia of 70 mm complete with window sleeve type cover arrangement at a height of 0.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 225 mm x 225 mm x 12 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination.
1.01	Supply & fixing 6 mm thick laminated mounted sheet inside the window i/c providing mounting arrangement etc complete as reqd.	-	-	-	-
1.02	Supply and fixing 63 amps. terminal block suitable for 16 sq. mm conductor- 4 Nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length on the existing laminated sheet.	-	-	-	-
1.03	Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 2 Nos, earth stud -1 Nos, welded at suitable height one nos washers, springs washers & nuts.	-	-	-	-
1.04	Provision on 4.5 mtrs. height for fixing of additional bracket	-	-	-	-
1.05	Cable supports clamps sutiable for 4 x 16 sq. mm cable.	55	Job	14,176	₹7,79,680
2	Providing and laying in position (1:2:4) reinforced cement Concrete foundation of size 400 mm (L) X 400mm wide and 1200mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement ring of cold twisted bars of 12 mm dia 1350 mm long (approx) 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia -1800mm (approx) 8 nos. (with 150 mm spacing) as requried with positioning of foundation bolts and providing 63 mm dia (O.D.) DWC, HDPE pipe of 0.3 mtrs. length for cable entry & exit as reqd.	55	Job	4,299	₹2,36,445
3	Supplying and Fixing 4 Nos. 20 mm dia. X 600mm long GI foundation bolt(EN8 grade) with nuts,washer including 2 Nos. template of 3 mm thick size 200mmX200mm with 4 Nos. 24mm dia holes to match with PCD of Pole base plate as reqd.	55	Job	1,612	₹88,660
4Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP- 66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).
4.01	120 watt	110	Each	2,958	₹3,25,380

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 2.61 MB

Work Item Documents

BOQ_398648.xls

BOQ • 0.33 MB

NIT.pdf

Tender Documents • 2.59 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supplying & erection of flange mounted hot dip galvanized octagonal poles of 7 mtrs. height made from 3 mm thick HR Steel plate having bottom dia of 130 mm & top dia of 70 mm complete with window sleeve type cover arrangement at a height of 0.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 225 mm x 225 mm x 12 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination.
1.01	Supply & fixing 6 mm thick laminated mounted sheet inside the window i/c providing mounting arrangement etc complete as reqd.	-	-	-	-
1.02	Supply and fixing 63 amps. terminal block suitable for 16 sq. mm conductor- 4 Nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length on the existing laminated sheet.	-	-	-	-
1.03	Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 2 Nos, earth stud -1 Nos, welded at suitable height one nos washers, springs washers & nuts.	-	-	-	-
1.04	Provision on 4.5 mtrs. height for fixing of additional bracket	-	-	-	-
1.05	Cable supports clamps sutiable for 4 x 16 sq. mm cable.	55	Job	14,176	₹7,79,680
2	Providing and laying in position (1:2:4) reinforced cement Concrete foundation of size 400 mm (L) X 400mm wide and 1200mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement ring of cold twisted bars of 12 mm dia 1350 mm long (approx) 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia -1800mm (approx) 8 nos. (with 150 mm spacing) as requried with positioning of foundation bolts and providing 63 mm dia (O.D.) DWC, HDPE pipe of 0.3 mtrs. length for cable entry & exit as reqd.	55	Job	4,299	₹2,36,445
3	Supplying and Fixing 4 Nos. 20 mm dia. X 600mm long GI foundation bolt(EN8 grade) with nuts,washer including 2 Nos. template of 3 mm thick size 200mmX200mm with 4 Nos. 24mm dia holes to match with PCD of Pole base plate as reqd.	55	Job	1,612	₹88,660
4Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP- 66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).
4.01	120 watt	110	Each	2,958	₹3,25,380

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supplying & erection of flange mounted hot dip galvanized octagonal poles of 7 mtrs. height made from 3 mm thick HR Steel plate having bottom dia of 130 mm & top dia of 70 mm complete with window sleeve type cover arrangement at a height of 0.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 225 mm x 225 mm x 12 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination.

1.01

Supply & fixing 6 mm thick laminated mounted sheet inside the window i/c providing mounting arrangement etc complete as reqd.

1.02

Supply and fixing 63 amps. terminal block suitable for 16 sq. mm conductor- 4 Nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length on the existing laminated sheet.

1.03

Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 2 Nos, earth stud -1 Nos, welded at suitable height one nos washers, springs washers & nuts.

1.04

Provision on 4.5 mtrs. height for fixing of additional bracket

1.05

Cable supports clamps sutiable for 4 x 16 sq. mm cable.

Job

14,176

₹7,79,680

Providing and laying in position (1:2:4) reinforced cement Concrete foundation of size 400 mm (L) X 400mm wide and 1200mm deep i/c excavation of earth, providing cutting, bending and placing in position, reinforcement ring of cold twisted bars of 12 mm dia 1350 mm long (approx) 8 Nos. and reinforcement ring of cold twisted bar of 8mm dia -1800mm (approx) 8 nos. (with 150 mm spacing) as requried with positioning of foundation bolts and providing 63 mm dia (O.D.) DWC, HDPE pipe of 0.3 mtrs. length for cable entry & exit as reqd.

Job

4,299

₹2,36,445

Supplying and Fixing 4 Nos. 20 mm dia. X 600mm long GI foundation bolt(EN8 grade) with nuts,washer including 2 Nos. template of 3 mm thick size 200mmX200mm with 4 Nos. 24mm dia holes to match with PCD of Pole base plate as reqd.

Job

1,612

₹88,660

4Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP- 66,IK-10, CRI >80, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).

4.01

120 watt

110

Each

2,958

₹3,25,380