Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹39.6 L
EMD Value
₹40,000
Closing Date
16 Nov 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer, Panchayat (R&B) Division, Godhra
Construction of New TDO Quarter At Shahera, Ta :Shahera, Dist:- Panchmahal
361044
24 of 2026-27
Open
Civil - All
Works
Panchmahal
7 documents required · 7 mandatory
₹1,500
Executive Engineer, Panchayat (R&B) Division, Godhra
₹40,000
2 Nov 2026
2 Nov 2026
2 Nov 2026
16 Nov 2026
2 Nov 2026
120 days
Name Of Work :- Construction of New TDO Quarter At Shahera, Ta :- Shahera, Dist:- Panchmahal
Taluka :Shahera District : Panchmahal
1 Construction of New TDO Quarter At Shahera, Ta :- Shahera
Bill of Quantities
Item of work Quantities Rate in Amount
Estimated Unit Figures in
1 Excavation for foundation upto 1.5 m depth including sorting out and 262.85 Cu.mt 222.36
stacking of useful materials and disposing off the excavated stuff upto
Meter lead.(B) Dense or Hard soil
2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting 155.57 Cu.mt 222.17
out and stacking of useful materials and disposing off the excavated stuff
upto 50 Meter lead.(B) Dense or Hard soil
3 Excavation for foundation for depth from 3.0 m to 5.0 m including 15.40 Cu.mt 174.20
sorting out and stacking of useful materials and disposing off the
excavated stuff upto 50 Meter lead.(B) Dense or Hard soil
4 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse 29.27 Cu.mt 4099.59
sand : 4- graded stone aggregates 20 mm nominal size) and curing
complete Including cost of formwork But Excluding The Cost Of
reinforcement for reinforced concrete work in (A) Foundations, footings,
Base or columns and Mass concrete .(For PCC)
5 Provinding and laying controlled cement concrete M -150 and finishing 3.10 Cu.mt 3784.60
smooth with curing etc complete, including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in(A) Foundations,
footings, Base of Columns and Mass concrete.
6 Provinding and laying controlled cement concrete M -250 and finishing 28.80 Cu.mt 4802.27
smooth with curing etc complete, including the cost of formwork but
excluding the cost of reinforcement for R.C.C. work in(A) Foundations,
footings, Base of Columns and Mass concrete.
7 Providing and laying controlled c.c. M.250 & curing complete including 5.63 Cu.mt 7568.94
the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Collumns, pillars, posts & struts upto floor
two level for G.F. (For Column Up to PL)
8 Providing and laying controlled cement concrete M.250 and curing 8.47 Cu.mt 5746.90
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (C) Slabs, landing, shelves,
Balconies, Lintels, Beams, Girders and Cantilever upto floor two
level.(For Ground Beam)
9 Filling available excavated earth (Excluding rock) in trenches plinth, sides 178.98 Cu.mt 130.39
of foundation etc in layers not exceeding 20 cm in depth consolidating
each deposited layer by ramming and watering.
10 Filling in foundation and plinth with murrum or selected soil in layers of 48.85 Cu.mt 273.96
20cm. thickness including watering, ramming and consolidating etc.
11 Filling in plinth with sand under floors including watering, ramming 12.55 Cu.mt 460.18
consolidating and dressing etc. complete.
12 Carring out plinth treatment to post construction / existing structure by 90.57 Sq.mt 63.80
spraying chemical solution for termite control treatment including labour
and material consistment with I.S.I specification. Using Chlordene and
Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one
percent is recommended i.e one litre 20 EC chemical emulsion with
liter give 1 % concrentration inclusive of one litre chemical emulsion
appication at the rate of 5 Litre chemical / Sqm of surface is
recommended as per I.S
13 Providing and laying damp proof course 25mm thick cement concrete 14.43 Sq.mt 306.63
1:2:4 (1-Cement : 2 coarse sand : 4 stone aggregate 10 mm nominal
size) and curing complete
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
14 Brick work using common burnt clay building bricks having crushing 30.09 Cu.mt 4021.02
strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement
Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventiona ( For B/w Up to
15 Brick work using Common burnt clay building bricks having crushing 37.61 Cu.mt 4289.32
strength not less than 35 kg/sq.cm in Super Structure above floor Two
Level in cement mortar 1:6 ( 1 cement : 6 fine sand ) (B) Conventional.(
For B/W Up to GF Slab)
16 Half brick masonry in common brunt clay building bricks having crushing 57.49 Sq.mt 715.03
strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-
coarse sand ) with 2 Nos of 6mm Mild steel round bars after every three
course embedded in Cement Mortar in Superstructure Aove Plinth level
upto floor two level (B) Conventional
17 Double Half brick thick honey- comb brick work with common burnt clay 69.04 Sq.mt 307.60
building bricks having crushing strength not less than 35 Kg/Sq.Cm. (i) In
Cement Mortar 1:4 ( 1- Cement : 4 - coarse sand)
18 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand 5.09 Cu.mt 3925.76
: 6- crushed stone aggregates 20 mm nominal size) and curing complete
including cost of formwork in (A) Wall Caps / Coping
19 Providing and laying controlled cement concrete M.200 and curing 3.73 Cu.mt 7088.18
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (C)
Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever
upto floor two level. (For Lintel)
20 Providing and laying controlled cement concrete work of M 200 and 1.11 Cu.mt 8107.27
curing complete including cost of formwork and Excluding reinforcement
for reinforced concrete work in (E)Staircases excluding landing upto floor
two level . For staircase in below give fair finish surface.For Staircase
21 Providing and laying controlled c.c. M.200 & curing complete including 6.75 Cu.mt 7523.49
the cost of form work but excluding the cost of reinforcement for
reinforced concrete work in Collumns, pillars, posts & struts upto floor
two level for G.F.(For Column)
22 Providing and laying controlled cement concrete M.200 and curing 9.41 Cu.mt 6216.55
complete Including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (C)
Slabs,landing,shelves,Balconies Lintels, Beams, Girders and
Cantilever upto floor two level. (For Beam)
23 Providing and laying controlled cement concrete M.200 and curing 14.54 Cu.mt 4612.67
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (C)
Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever
upto floor two level.(For Grade slab)
24 Providing and laying controlled cement concrete M.200 and curing 13.64 Cu.mt 6309.47
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (C)
Slabs,landing,shelves,Balconies Lintels, Beams, Girders and Cantilever
upto floor two level.(For slab)For GF Slab
25 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 11421.70 Kg 76.21
bending, binding and placing in position complete upto floor two level.
26 Providing and fixing M.S. Fan clamps type 1 to 16mm dia M.S. bar bent to 6.00 Nos 132.19
shape with hooked ends to R.C.C. slabs curing, laying including painting
the exposed portion of loops, all as per standard designe complete
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
27 Providing & fixing 40 mm thick Single shutter flush door solid core 6.30 Sq.mt 7342.70
finished with both side 1 mm thick lamination both side like 'NOVAPAN
'or equivalent, of natural wood grain shade as approved by this office
having telephone black granite 18 mm thick frame with double stone as
per the instruction of Engineer in charge.with necessary SS hinges and
fixtures etc . complete.
28 Providing & fixing 35 mm thick Single shutter flush door solid core 5.04 Sq.mt 6933.65
finished with both side 1 mm thick laminationboth side like 'NOVAPAN 'or
equivalent, of natural wood grain shade as approved by this office having
telephone blackgranite 18 mm thick frame with double stone including
fixed ventilation above lintle level as per drg and as per theinstruction of
Engineer in charge.with necessary SS hinges and fixtures etc . complete.
29 Providing and fixing window having extruded aluminum colour anodized 10.73 Sq.mt 3199.68
section frame main outer size 95mm x 24mm x 1.17mm (of Jindal section
no.2459 @ Wt. 0.738 Kg/mt), horizontal three track member size 92mm x
31.75mm x 1.30mm (of Jindal section no. 8688, @ Wt. 1.07 Kg/mt),
vertical member of size 92mm 31.75mm x 1.50mm (of Jindal section no.
8933 @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size
40mm x 18mm x 1.29mm (of Jindal Section No. 8947 @ Wt. of
Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal
section no: 8949 @ Wt. of 0.456 kg / mt) with 5 mm th transparent bronze
colour tinted float glass with powder coated aluminum fittings and fixtures
and transparent silicon sealant glass fixing Including Granite Frame as
per details etc.
30 Providing and fixing Louverd type ventilators with powder coated 0.72 Sq.mt 13732.97
aluminum fittings and fixtures and Blur glass fixing to Adjustable
louverds and black granite frame as per details and executed as per
directed by Engineer Incharge.
31 Providing and fixing M.S. grills of required pattern to 397.94 KG 143.42
wooden/Marble/Granite/Stone frames of windows etc. with M.S. flats at
required spacings and frame alround, square or round bars with round
headed bolts and nuts or by screws (A) Ornamentle Grill.
32 Providing and fixing M.S. grills of required pattern to 4.84 Sq.mt 3261.29
wooden/Marble/Granite/Stone frames of windows etc. with M.S. flats at
required spacings and frame alround, square or round bars with round
headed bolts and nuts or by screws (A) Plain Grill.
33 Providing and laying Vitrified tiles 8 to 10 mm thick , 24''x 24'' in flooring 64.70 Sq.mt 1073.12
treads of steps and landing laid on abed of 12mm thick cement mortar
1:3 (1-cement :3-coarse sand ) finishing with flush pointing in white
34 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 4.88 Sq.mt 1397.82
base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or
fixing on existing flooring by adhesive material including dismentaling of
existing flooring and jointed with color cement slurry including finised with
flush pointing & cleaning the surface etc. complete for antiskit.
35 Providing and layingMarbo Grenite tiles 8 to 10 mm thick , 24'' x 24'' in 70.03 Sq.mt 1141.45
skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-
cement : 3-coarse sand) and jointed with white cement slurry
36 Providing and laying polished Kota stone slab flooring over 20mm 14.09 Sq.mt 976.72
(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or
L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with
grey cement slurry mixed with pigment to match the shade of slab
including rubbing and polishing etc. complete. (A) 25mm thick.
37 Providing and laying 18 mm thick machine cut ,free edges ,machine 11.63 Sq.mt 3325.93
polished Black Granite tread and risers in single piece with 1 cm nosing
and necessary grooves on treads etc. complete.
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
38 Providing and laying broken china mosaic flooring for terrace 96.84 Sq.mt 747.28
using 12 mm to 20 mm broken pieces of glazed tiles to be laid over
cement mortar 1:3 to plain or slope and to be tempered to bring
mortar creme out upto surface using white cement including rounding
off junctions and extending them upto 15 cm along the wall,clearing with
water and oxalic acid etc. as directed.
39 Providing and laying BBCC of 75mm th. Layer in CM (1:3) including 96.69 Sq.mt 679.73
sparaying two coat of water proofing chemical with selected brand by
enginner incharge .i.e.perma or other with leveling complete for ready
base of china mosaic tratment.
40 Providing and cement vata (10cm x 10cm size) quarter round in cement 88.77 Rmt 23.68
mortar 1:1 including neat cement finishing watering etc. complete.
41 Providing 15mm thick cement plaster in single coat on Rough 188.59 Sq.mt 167.03
(Similar)side of single or half brick walls for interior plastering upto floor
two level and finished even and smooth in (ii) Cement mortar 1:4 (1-
cement :4-sand) (Interior Plaster)
42 Providing 15mm thick cement plaster on ceilings and sofits of stairs upto 85.88 Sq.mt 191.84
floor two level instead of plastering on walls. and smooth in (ii) Cement
mortar 1:4 (1-cement :4-sand) (ceiling Plaster)
43 20mm thick sand faced cement plaster on walls upto height 10 metres 395.35 Sq.mt 335.70
above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-
cement : 3-sand)With Chiken mesh and 8mm thick finishing coat of C.M.
1:1 (1-cement : 1-sand) etc. complete.
44 Providing 20 mm thick double coat mala plaster on interior brick/ concrete 29.00 Sq.mt 270.43
work for plastering comparising of base coat of 12 mm thick cement
plaster in cement mortar 1 cement : 4 sand in rough finishing and 8 mm
thick top coat of cement mortar 1:2 finished with trowel including
scafolding curing .GF
45 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 33.94 Rmt 40.99
46 Applying two coats of putty & two coats of primer of approved brand and 188.59 Sq.mt 40.59
manufacture on new wall surface to give an even shade including
thoroughly brushing the surface free from mortar dropping and other
foreign matter and sand papered smooth. (Interior Wall Putty)
47 Applying two coats of putty & two coats of primer of approved brand and 85.88 Sq.mt 42.67
manufacture on new wall surface to give an even shade including
thoroughly brushing the surface free from mortar dropping and other
foreign matter and sand papered smooth. (Ceiling Putty)
48 Wall painting two coats with plastic emulsion paint of approved brand 188.59 Sq.mt 78.90
and manufacture on wall surfaces to give an even shade including
throughly brushing the surface free from mortar droppings and other
foreign matter and sand papered smooth. (Interior Wall Paint)
49 Finishing wall with weather proof exterior emulsionpaint on wall surface 314.85 Sq.mt 114.53
(two coats) to give an requiredshape even shade after thoroughly
brushing the surfaceto remove all dirt, and remains of loose powdered
materials.etc complete (Exterior Wall Paint)
50 Wall painting two coats with plastic emulsion paint of approved brand 85.88 Sq.mt 80.98
and manufacture on wall surfaces to give an even shade including
throughly brushing the surface free from mortar droppings and other
foreign matter and sand papered smooth on ceiling. (Ceiling Paint)
51 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 20.00 Rmt 148.11
Pipe ( SCH- 40) for cold water including fittings make PRINCE
/SUPREME/ ASTRAL / FINOLEX or equivalent as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
52 Providing laying and jointing in true line and level 32mm dia. U.P.V.C. 40.00 Rmt 119.14
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
53 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 60.00 Rmt 72.64
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
54 Providing and fixing concealed center point to wall ceiling & floor CPVC 21.00 Rmt 653.77
(SDR 13.5) PIPE having National SanitationFoundation (NSF) seal for
potable water of following dia. nominal bore tube fittings and clamps
including making goodthe wall, ceiling and floor etc.complete. [F] 50mm.
55 Providing and fixing concealed center point to wall ceiling & floor CPVC 30.00 Rmt 249.72
(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for
potable water of following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc. complete. [C]
56 Providing laying and jointing in true line and level 110 diameter U.P.V.C. 36.00 Rmt 835.14
SWR Type B pipe confirmng to IS 13592-1992 with one end plain and
other end socketed with rubbering, & fitting conforming to ISI 14735-1999
of approved make for drainage system pipe line, pipe shall be jointd with
each other with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 110 mm diameter x 149 mm length x 145 mm high at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as Cowel vent, bends, shoes etc.
including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
57 Providing and fixing screw down bib taps of following size.(A) Brass 9.00 Nos 214.80
screw down bib tap polished bright. (ii) 20mm dia.
58 Providing and fixing pillar tap, capstan head, screw down high pressure 2.00 Nos 354.69
with screws, shanks and back nuts. (ii) 20mm dia.
59 Providing and fixing chromium plated brass half trun flush cock of 7.00 Nos 263.77
approved quality including fixing in pipe line etc. complete.(ii) 25mm dia.
60 Providing and fixing Gun metal check or non return full way wheel 4.00 Nos 663.42
valve.40 mm dia.
61 Providing and fixing Gun metal check or non-return fullway wheel 5.00 Nos 420.63
valve.(C) 25mm dia.
62 Providing and fixing Table top Basin having Granite of 18 to 20 mm thick 2.00 Nos 9221.30
having minimum single plece length of 210 mm to be fixed on Walls to
act as Study Table / Wash Basin , including fixing the same using cement
mortar in proportion 1:1 etc. comp , Necessary Grove in Walls By
Machine , Front Side Round the edge and cutting hole in ganite stone for
washbasin / Computer Wire , including rubbing and polishing finishing
jointed with grey cement slurry including rubbing and polishing finishin get
complete. etc complete.. with all labour & material & equipment.....etc.
Completed as directed by Engineer-in-charge (A) Granite slab 18mm
63 Providing and fixing C.P.Brass towel rail complete with C.P.Brass 3.00 Nos 603.19
brackets fixed to woodenplugs with c.p.brass screws.(B) 600 mm x
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
64 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 2.00 Nos 282.16
100mm dia. Each
65 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 2.00 Nos 833.73
glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to
wooden pluge with C.P. brass screws and washers.
66 Providing and laying wash down water closet ( european type WallHung 1.00 Nos 10261.60
WC pan ) Florentine series FLS-WHT 0111B including providing and
fixing metropole Flush cock seat cover, jet wash etc complete unit of
jaquar Branch ( or equvalant ) including installing and fitting as per
manufacturers standards by skilled trained plumber including testing etc
complete quality and brand as approved by Engineer in charge.
67 Providing laying and jointing in true line and level 110 diameter U.P.V.C. 16.50 Rmt 835.10
SWR Type B pipe confirmng to IS 13592-1992 with one end plain and
other end socketed with rubbering, & fitting conforming to ISI 14735-1999
of approved make for drainage system pipe line, pipe shall be jointd with
each other with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 110 mm diameter x 149 mm length x 145 mm high at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as Cowel vent, bends, shoes etc.
including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials.
68 Providing laying and jointing in true line and level 160 diameter U.P.V.C. 20.00 Rmt 831.21
SWR Type B pipe confirmng to IS 13592-1992 with one end plain and
other end socketed with rubbering, & fitting conforming to ISI 14735-1999
of approved make for drainage system pipe line, pipe shall be jointd with
each other with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 160 mm diameter x 210 mm length x 196 mm high at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost
of all materials.
69 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm 10.00 Nos 547.20
diameter with jali of the following nominal diameter of self cleansing
design with C.I scread down or hinged grating including the cost of
cutting and making good the walls.
70 Providing and fixing PVC SWR Nahni trap IS 14735 fordrain - 100 mm 5.00 Nos 558.35
diameter with jali of the followingnominal diameter of self cleansing
design with C.I screaddown or hinged grating including the cost of cutting
andmaking good the walls.
71 Providing and laying (two level or slopes ) and jointing with stiff mixture of 7.00 Rmt 305.13
cement mortar in proportion 1:1 salt glazed stone ware pipes following
nominal internal diametre including testing of pipes and joints etc
complete. 150 mm dia.
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
72 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2- 1.00 Nos. 11029.96
coarse sand : 4-graded stone aggregate 20mm nominal size) foundation
concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm
size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-
coarse sand) finished with a floating coat of neat cement and making
channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-
stone aggregate 20mm nominal size) finished smooth complete including
curing and festing (i) Inside size900mm x 1200mm and 1.5M. deep
including C.I. cover with frame size 560mm diameter total weight of cover
and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of
frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick
having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar
1:5 (1- Cement: 5-Coarse sand) (1) A type depth 0.90 Metre for 150mm
diameter sewer.
73 Providing erecting and fixing double coated Syntex or equivalent PVC. 1500.00 Litre 3.94
(ISI) mark water tank of reqd capacity each with all necessary fittings &
connection etc. complete on terrace.
74 Providing and fixing ball cock of approved quality as directed.(A) Copper 1.00 Nos 132.88
metal(i) 25 mm dia.
75 Providing and laying sandwich type kitchen platform of size 2.10 x0.76 x 2.93 Sq.mt 23522.90
0.76 m and respected length with dhar polish or moulding having base 4"
and spport & base with marble or Kota as per site requirement also loft
and base finish with glaze tile and top with selected shed of marble or
granite with gas pipe provision and sink including all fittings ,material and
labour as per directed by engineer incharge.
76 Clearing and grubbing road land including uprooting rank vegetation 0.04 Ha. 80243.79
grass bushes,shrubs,sapling and trees girth up to 300 mm removal of
stumps of trees cut earlier and disposal of unserviceable materials(A) By
manual means in area of light jungle
77 Providing & Fixing Co2 type portable ABC Dry Powder Type ABS Fire 2.00 Nos 3535.00
Extinguisher Capacity 4.5 Kg. Discharge Range 3mt. Timing 60 to
Sec. standard approved IS code No. 2878:2004
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
78 Providing and fixing eco-friendly light weight calcium silicate false ceiling 46.97 Sq.mt 1648.95
tiles having Tegular edge & 15 mm Thick Densified edges on the Tile
Periphery for Extra Strength The Light weight calcium silicate ceiling tiles
shall have , light reflection 85% non-combustible as per B.S. 476 part IV,
100% humidity resistance and also having thermal conductivity0.043°
w/m KC.for the best thermal Insulation . The Light weight calcium Silicate
tile shall be of approved texture Fine fissured/ Spintone/Cosmos having
NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent
of size 595 X 595 mm to be laid on true horizontal level suspended inter
locking metal grid of hot dipped galvanized steel sections (galvanizing
suitably spaced at joints to get required length and size of 24X38mm
made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre,
600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to
be interlocked at middle of the 1200X600mm panel to form grid of size
600X600mm resting on periphery walls/partitions on a perimeter wall
angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick
(minimum) sheet with the help of rawl plugs at 450mm centre to centre
with 25mm long dry wall screws @ 230mm interval and laying 15mm
thick Densified edges light weight calcium silicate ceiling tiles of approved
texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting
/making opening for services like diffusers, grills, light fittings, fixtures,
suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm
fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I.
adjustable rods with galvanized steel level clips of size 85X30X0.8mm,
24mm of all T-sections shall be pre-painted with polyester baked paint,
79 Providing and fixing 25 mm thick shutters made of waterproof ply for 19.37 Sq.mt 4715.69
cupboards, shutter with frame and PVC beading including anodised
alluminium butt hinges & .S.S. Handle for Door 15 Cm size with
necessary screws finished with both side 1 mm thick lamination both
side of natural wood grain shade as per the instruction of Engineer in
80 Providing and fixing modular type drawer unit consisting of heavy-duty 2.58 Sq.mt 21820.04
telescopic SS basket channel system with SS wire basket, complete with
approved quality BWR/BWP grade plywood shutter of required thickness,
laminate finish on exposed surface, PVC edge banding, SS handles,
screws, fittings and all necessary hardware complete, fixed in position as
deep Basket Material :SS wire basketChannel : Heavy-duty telescopic
basket channel Shutter: plywoodFinish: 1.0 mm laminate on outer face
Edge Band : PVC edge banding Handle: SS matt finish Unit : Each
81 Providing and fixing 12 mm thick and 100mm wide pelmet of flat pressed 4.02 Rmt 221.55
3 layer neneed particle board solid core with 25 mm diametre alluminium
curtain Road and brackets including fixing with 25mm x 3mm M.S flat
10cm,long and plugs etc complete.
82 Preparing and fixing the Sliding type curtain with high quality fabric 0.36 Sq.mt 2727.00
i.e.skyloom,D'decore or equivilent with astar finish of one side as per
architecture design and execute such iteam as per directed by Engineer
incharge. (1 layer blackout (astar), 1 layer for decorative ) Including all
material , labour, fitting and all. Iteam to be executed as per directed by
Engineer incharge.
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
83 Providing & finishing Wall Texture With two coats of putty & two coats of 11.19 Sq.mt 1128.17
primer of approved brand and manufacture on new wall surface to give
an even shade including thoroughly brushing thesurface free from mortar
dropping and other foreignmatter and sand papered smooth as per
directed by Engineer incharge (Royal Play Texture)
84 Providing and supplying TV unit made of 18 mm thick MR grade plywood 8.88 Sq.mt 13584.50
with 4m thick veneer melamine polish finish. Drawers and shutter made
of 18mm thick MR grade plywood with 4m thick veneer melamine polish
finish. Drawer run on telescopic chenal and shutter hanging on auto
hinges with all necessary hardware etc. complete as directed by Engineer
in charge. (All edges to be finish with teak wood border & melamine
polish) TV unit Veneer minimum size: 2100 x 450 x 450 mm.
85 Providing and Arranging three seater wooden sofa made from Indian teak 1.00 No 42420.00
wood with melamine polish.seat made from 100 mm thick 40 density
foam with 25 mm thick supersoft HD covered for softness. seat to be kept
on high density nylon elastic belt inside Framing size 50 mm x 37 mm
support armrest, legs and outer frame having size 80 mm x 37mm with
inner brace between armrest and seat frame having size 25 mm x 50 mm
as showing the photographs. Back 80 mm thick 40 density foam with
12mm thick supersoft HD covered for softness. Seat and back covered
with high quality fabric approved shade and wooden armrest Including all
materials, Hardwares and labours etc. complete as per drawing /
photographs & detail and as directed by Engineer-in charge.
86 Providing and Arranging two seater wooden sofa made from Indian teak 1.00 No 30300.00
wood with melamine polish. Seat made from 100 mm thick 40 density
foam with 25 mm thick supersoft HD covered for softness. Seat to be
kept on High density nylon elastic belt inside. Framing 50 mm x 37 mm
support. Outer frame 80 mm x 37mm. Back made from 80 mm thick
density foam with 12mm thick supersoft HD covered for softness. Seat
and back covered with high quality fabric of approved shade (Basic Rate
Rs.400/ Rmt) and wooden armrest Including all materials and labour etc.
Complete as per drawing / photographs & detail and as directed by
Engineer-in charge.
87 Providing and Arranging tea table made from 37mm x 37 mm Indian 1.00 No 5454.00
teakwood leg and top frame made from 37mmx 75mm Indian teakwood
having 18 mm thick Ply and 4mm thick Veneer with melamine polish and
0.8mm thick balancing laminate at bottom for shelf made with
surrounding Indian teakwood frame of size 37 mm x 12 mm. The top
having 12 mm thick glass with edge finish to be placed properly in groove
made. Surface to be finished with melamine polish including all materials
and labours etc. complete as per drawing and instruction of engineer-in
88 Providing & fixing a KING size Bed (6' x 6.5 ') unit made from standard 2.00 No 77770.00
calibrating plywood of various size (i.e. 19 mm, 25mm, 12mm ,8 mm) and
finish with seamless designer laminate of 1 mm thick outerside & 0.8 mm
th linear inside With side table both side including Matress- 8 " and all
hardware i.e. hinges,channel,handle, Hydrualic Pump , screw, fevicol &
all misc) iteam to be executed as per architecture design, drwaing &
instructed as per engineer incharge.
structure : 40mm, 25 mm, 19 mm plywood (green, surya
sagun,aerolam,Duro or Equi.) Laminate
: Greenlam,Century,Meriolam Or Equi. Hardware : Hettich,Godrej,
Haffle or Equi. Form : dunlop, Everest, Sleep well or Eui.
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
89 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 64.80 Sq.mt 686.90
concrete block 60mm thick with grade of concrete M300 pnumatic
compressed / vibrated mechanically and as per approved design
Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling
and filling the joint with sand in proper line and level as per guidlines of
IRC : SP 63-2018 etc. Complete
90 Providing and fixing pre-cast concrete kerb stone of gray cement based 52.80 Rmt 383.37
concrete block 30cm length,30cm height and 15cm thick of M200 grade
concret as per approved design and including excavation for fixing in
proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc
91 Anti-Termite System:Providing and laying of permanent piping technology 38.40 Sq.mt 134.33
anti-termite treatment before flooring work by installing LLDP (Low linear
density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt
pressure compensation chip every 30 cm interval in the tube, having
working pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-
clips and nails. The LLDP pipe shall be installed at the entire periphery of
the building and at internal network of building at a depth of 20 to 200 mm
under floor at every 2 to 3 mtr. c/c distance (adjusted as per building
layout ) & Ends of loop pass through a PVC elbow of minimum 32 mm ID
at junction box of wall and floor level, entering into a steel reinforced
grooved flexible pipe of minimum 22 mm ID leading into junction box and
the loops shall terminate in junction boxes & test every junction during
injecting chemicals for termite control treatment. The anti termite
chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III) shall be
injected by the pressure pump diluted with water @ 10.5 ml/5 ltr of water
at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit
approved line plan for piping system and junction boxes dully approved
by Engineer-in-Charge with bond of 5 year warranty.(i)Anti Termite
chemical injected area (Chemical injecting incl. labour cost)
92 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having 2.00 No 958.20
weight not less than 35Kg.
93 Providing laying (to level or slopes) and jointing reinforced concrete Light 49.00 Rmt 248.67
duty non-pressure pipes I.S. class NP2 of the following internal diameter
with collars and butt ends prepared for collar joints including testing of
joints complete.(B) 150mm
94 Constructing brick masonry chamber for underground C.I. Inspection 2.00 No 2932.92
chamber and bends with bricks having crushing strength not less than
35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm
intenal dimensions total weight of cover with frame to be not less than
38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe
with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate
20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with
cement mortar 1:3 finished smooth with a floating coat of neat cement on
walls and bed concrete etc. complete.(i) Inside dimensions 455mmx
610mm and 450mm deep for single pipe line.
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
95 Constructing brick masonry chamber for underground C.I. Inspection 1.00 No 3660.76
chamber and bends with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x
610mm intenal dimensions total weight of cover with frame to be not less
than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top
slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a floating coat of neat
cement on walls and bed concrete etc. complete.(ii) Inside dimensions
500mm x 700 mm and 450mm deep for pipe line with one or two inlets.
96 Constructing brick masonry chamber for underground C.I. Inspection 2.00 No 7180.44
chamber and bends with bricks having crushing strength not less than
35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x
610mm intenal dimensions total weight of cover with frame to be not less
than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top
slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a floating coat of neat
cement on walls and bed concrete etc. complete.(iii) Inside dimensions
600mm x 850 mm and 450mm deep for pipe lines with three or more
97 Providing laying (to level or slopes) and jointing reinforced concrete Light 30.00 Rmt 348.03
duty non-pressure pipes I.S. class NP2 of the following internal diameter
with collars and butt ends prepared for collar joints including testing of
joints complete.(C) 250mm
98 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. 6.20 Cum 600.55
thickness including watering, remming and consolidating etc. complete.
99 providing and laying CI steps 50cm x 15cm. 2.25cm. And Ci cover 1.00 No 6303.41
suitable frame with necessory fixture and joint and finish complete.
(Including sump step in staggared form including two coat of oil paint)
100 Providing and fixing of submercible motor of required quality and with 1.00 Nos 9595.00
control panel of 1.00 HP etc complete with having outlet 25 mm dia..
101 Providing & fixing to wall, ceiling and floor galvanized mild steel tubes 15.00 Rmt 602.69
(medium grade) of the following nominal bore, tube fittings and clamps
including making good the wall, ceiling and floor (E) 40mm.
102 Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand 18.00 Rmt 213.70
:10-Graded stone aggregate 40mm nominal size) bedding for stoneware
pipes of following internal diameters with necessary formwork and curing
complete.(B) 150mm dia. (166mm Ave. bed thickness)
103 Extra over for providing salt Glazed stoneware fittings.(i) Bends of 5.00 No 63.79
required degree (any redious) of following nominal diameters.(B) 150mm
104 Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and 31.08 Sq.mt 621.98
polished to Granolithic finish top layer 6mm thick with white,black or white
and black marble chips of size from smallest to 4mm nominal size laid in
cement marble powder mix 3:1 (3- Cement : 1 marble powder by weight)
in proportion of 4:7 (4-cement marble powder mix : 7-marble chips by
volume) 20mm thick with under layer 14mm thick cement plaster 1:3 (1-
cement : 3-coarse sand) (A) Dark shade pigment with ordinary cement
(In top layer only)
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
105 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 17.00 Each 573.25
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length , in below type of pipe erected
with 6A Modular type switch / bell push & accessories and earth
continuity of following type, erected on PVC / Metallic/Wooden box,
single mounting base frame covered with textured/metallic/white front
plate modules erected on / in wall / ceiling as per pipe erected, with
necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with
medium class Rigid PVC pipe and accessories erected concealed in
wall/ceiling complete Cat. III
106 Point wiring for Fan/Exhaust with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 6.00 Each 796.12
(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length, in below type of pipe erected
with 6A Modular type switch and hum free EME step type electronic fan
regulator mounted and accessories with earth continuity of following
type erected on PVC / Metallic/ Wooden box, single mounting base frame
covered with textured/metallic/white front plate modules erected on / in
wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed. (f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling complete Cat. III
107 Point wiring for on board Looped Plug with 6A Modular type switch & 5 9.00 Each 303.90
pin socket erected on PVC / Metallic/Wooden box, single mounting base
frame covered with textured / metallic/white front plate modules erected
on / in wall / ceiling with following type accessories Cat. III
108 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 7.00 Each 601.85
both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden
box covered with appropriate front plate modules erected on / in wall /
ceiling as per pipe erected with following type of accessories. [I] For 6A
Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby
switchboard/mcb db board (f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling complete Cat. III
109 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 3.00 Each 879.54
both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden
box covered with appropriate front plate modules erected on / in wall /
ceiling as per pipe erected with following type of accessories. [III] For 16A
Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire with 2.5 sq.mm (
green) earthing wire from mcb d b board. (f) with medium class Rigid
PVC pipe and accessories erected concealed in wall/ceiling complete
110 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) 4.00 Each 1028.52
both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden
box covered with appropriate front plate modules erected on / in wall /
ceiling as per pipe erected with following type of accessories. [III] For 16A
Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm (
green) earthing wire from mcb d b board. (f) with medium class Rigid
PVC pipe and accessories erected concealed in wall/ceiling complete
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
111 Providing following type of Modular Type Accessories mounted with PVC 1.00 Each 189.49
/ metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge. (4) TV Co-axial
112 Providing following type of Modular Type Accessories mounted with PVC 1.00 Each 189.49
/ metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge.(8) Computer RJ-45
113 Providing following type of Modular Type Accessories mounted with PVC 1.00 Each 178.77
/ metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge. [A] For One Gang-
Cat. III (11) 6 Amps. Bell Push
114 Providing following type of Modular Type Accessories mounted with PVC 1.00 Each 176.38
/ metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge. [A] For One Gang-
Cat. III (20) Modular Buzzer
115 Providing and erecting Sheet Steel powder coated MCB distribution 1.00 Each 2760.20
board - flush / surface mounted fitted with busbar, neutral link, earth bar
and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB
to house appropriate nos. of MCBs.(The DBs should be used of same
company of MCB to be used) suitable for (B) three phase incoming and
single phase horizontal type outgoing Per phase isolation type (PPI) (b)
sheet steel double door (i)4 way
116 Providing and erecting Approved make RCCBs conforming to IS: 12640 1.00 Each 3587.31
and having sensitivity of 30 mA and Short Circuit withstand capacity of
KA and suitable for operation on 3 phase and neutral 415V,50Hz. having
characteristic of quick action & tripping with all advance feature & do not
incorporate any electronic component for following Max. rating erected
as directed. (iii) 63 Amps. FP
117 providing and erecting Miniature circuit breaker single pole 6A to 25A 6.00 Each 132.28
suitable to operate on 240 V A.C. system and having breaking capacity
10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI
118 Supplying & erecting in earthpit of minimum bore dia. 225mm size 1.00 Each 6894.56
approved make Safe Earthing Electrode consisting Pipe-in-Pipe
Technology as per IS 3043-1987 made of corrosion free hot dipped
G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron
galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,
connection terminal dia of 14 mm with constant ohmic value
surrounded by highly conductive compound with high charge dissipation
suitable for following type of applications with chamber and heavy duty
cover.(approved make OEM has to submit test certificate including value
of earth resistane of installation. [A] For electrical installation up to 440 V
Length of Pipe - 1 Mtr Back filling compound - 1 Nos. of Bag of 15 Kgs.
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
119 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 4.00 Each 440.96
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/
aluminium die cast powder coated and high U.V. & corrosion resistance
with diffuser with company mark/name 160V to 270V, Power Factor
more than 0.9, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy>
85 lumens/watt, LED driver efficiency > 85 % ( fitting required LM-79 &
LM-80 Certificates)(NOTE: Below description have shown ranges of
Wattage capacity of LED fittings.The Engineer incharge may select any
wattage capacity between the ranges shown.) (A) Tube Light with integral
driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat. III
120 Supplying and erecting led lamps with following wattage capacity of 220 7.00 Each 222.86
to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22
lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser
suitable LAMP holder (iii) 10 to 15 watts
121 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 9.00 Each 504.13
to 0.5 Watt assembled on single MCPCB, with housing used as a heat
sink shall be made of thick sheet Steel conforming to IS: 513/
CRCA/aluminium pressure die cast powder coated and high U.V. &
corrosion resistance with diffuser housed in aluminium casted body with
company mark/name 160V to 270V,Power Factor more than 0.9, THD <
15 %, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED
driver efficiency > 85 % (fitting required LM-79 & LM-80
Certificates)(NOTE: Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.) (A) Square/ Circular shaped
Surface/Recessed Mount Downlight with provision for spring loaded
mounting clips complete.IP20 (ii) 11-15 watts, Surge-2 KV - Cat III
122 Supplying and erecting LED street light / Flood light fittings with High 4.00 Each 2151.19
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminium housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics/ lenses
with company mark/name engraved or embossed 160 to 270 V,Power
Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity
ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency >
85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below
description have shown ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity between the ranges
shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light
must have 440VAC line supply with over-voltage protection. (ii) 15 to
123 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan 4.00 Each 2298.98
with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz
1200 mm sweep complete having 3blades with aluminium blades with
canopy & 30 cm. down rod erected with earthing.(Make shall be
approved by Engineer in charge)
124 Providing & erecting fresh air fan 250 mm dia with square frame make of 2.00 Each 1840.13
ABS body with louvers - Cat. II
125 Supplying & erecting single phase approved make industrial exhaust fan 1.00 Each 2424.12
suitable for medium duty ring mounted low noise operation suitable for
medium duty having following dia size and maximum speed in RPM [A]
305 mm dia 900 RPM Cat. II
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
126 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 30.00 RM 120.37
marked stranded Copper conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green colour for earth
continuity of following size (A) With medium class Rigid PVC pipe and
accessories(d) 3 wire 2.5 sq. mm
127 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 40.00 RM 97.72
marked stranded Copper conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green colour for earth
continuity of following size (A) With medium class Rigid PVC pipe and
accessories(c) 3 wire 1.5 sq. mm
128 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 30.00 RM 168.04
marked stranded Copper conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of following
size (A) with medium class Rigid PVC pipe and accessories (d) 3 wire
129 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 20.00 RM 165.66
multistrand Aluminium conductor for 1.1 KV. to be laid on wall with
necessary clamps or in existing trench / pipe of following size of cables
(A) 4 core 10 Sq. mm
130 providng and erecting Approved make energy meter 3 phase 4 wire 1.00 Each 3182.10
unbalanced load rating, 10A to 60 Amp. based on ASIC(Application
specific Integral Circuits) digital technology with accuracy Class - 1
temper proof, free from effect of external magnetic field with 3 phase
indication, earth & impulse indication, 6 digit electro mechanical impulse
counter, suitable work on 120 V to 300V per phase 45-55 HZ, housed in
robust enclosure with erection as directed.
131 Supplying and erecting approved make Instantaneous type water heater 1.00 Each 6655.01
with 3Itr.capacity rust free container housed in ABS plastic body insulated
with glass wool / puff insulation and 3 Kw heating elements,adjustable
thermostat 300 C to 850 C with set to operate at 850 C (+ /-60 C ) auto
reset indication lamps, thermal cut-out, safety valve fusible plug etc.
Premium Category (Racold,A.o.Smith,Venus)
Rs. Thirty Nine lakhs Fifty Seven Thousand Thirty Rupees And Paisa Sixty Four Only
I / We am / are willing to carryout the work at above/Below percent Percent above/Below)
(Should be written in figure and words) of the estimated rates mentioned above. Amount of my / our tender worked out as
(Please strike out which ever is not applicable.)
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra
payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement
Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of
difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.
5. TDO QTR Shahera Page
Item of work Quantities Rate in Amount
Estimated Unit Figures in
Quantities rate and wordings of items are as per estimate and calculation in the Sch. - B are airthmatically checked.
Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found
Sr.Divisional Account Officer Dy.Executive Engineer
Panchayat (R&B) Division Panchyat (R & B) Sub Division
Signaturre of contractor Executive Engineer
with seal Panchayat (R&B) Division
5. TDO QTR Shahera Page
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Electrical Tender General - Technical.pdf
Performance Bond and Bitumen date 4-5-26.pdf
BOQ TDO.pdf
Drawing.pdf
GR_compressed.pdf
SBD part 1.pdf
SBD part 2.1.pdf
SBD part 2.pdf
Specification with Index.pdf
Testing.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .