Construction of Additional Accommodation for Construction of Newly Upgraded 50 bedded Civil Hospital at Indora, Distt. Kangra (HP)

Amount

Earth work in Excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-in-Charge and returning the stcked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etcetera including excavation for sockets, and dressing of sides, ramming of bottoms upto any depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetra and disposing of surplus material/excavated,soil per approved drawing, design, specification and as per the entire satisfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders lintels window sills, cornices, arches corbelling including curved surfaces where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts square rectangular polygonal in plan including mouldings, cornices etcetera; including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings windows sills, cornices, arches, moulding, corbelling including curved surfaces where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in plain concrete work in Stairs, (excluding landings) except spiral staircases) where ever required as per Architectural drawing, design and specifications and the like floor etcetera including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls (any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in edges of slab and breaks in floors and walls under any thickness including carriae of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Weather shade, Chajjas, corbels etc. including edges as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in Small lintels not exceeding 1.5 m ( one decimal five metre) clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding the cost of centering and shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:3:6 (One cement isto three sand isto six graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding the cost of centering and shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetres) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate) 12.5mm (Twelve decimal five millimetres nominal size) and curing complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (Viscosity grade ten) of approved quality using 1.70 Kgs. (one decimal seven zero Kilogram) per square metre on Damp Proof Course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) for reinforced cement concrete work with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic metre or as per approved design mix for work upto plinth level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-20 (M-Twenty) design mix to obtain the ccompressive strength of 20N/mm2 (Twenty Newton per square millimetre) for reinforced cement concrete work with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre or as per approved design mix for all above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five ) design mix to obtain the ccompressive strength of 25N/mm2 (Twenty five Newton per square millimetre) for reinforced cement concrete work with cement contents not less than 360 kg (Three hundred sixty kilogram) per cubic metre or as per approved design mix for all above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.

Providing Tor steel reinforcement of TATA Tiscon / Sail of Thermo mechanically treated bars of grade Fe-500 (Fe- Five hundred) or more for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per specifications, approved drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Brick work using common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five) in superstructure above plinth level up to all floor level.in Cement mortar 1:4 (One cement isto four coarse sand) including carriage of material within all leads, lifts and other incidentals as per specifications approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (one cement isto six coarse sand) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Stone filling with hard stone of approved quality under floor including watering, ramming, consolidating and dressing complete as per specifications, approved drawing, design as per entire satisfactions and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured coated/ anodised aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco aluminium with extruded built up standard tubular and other sections No. 14081 make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing coloured coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco approved make conforming to IS: 733 and IS: 1285 anodised aluminium (anodised transparent of dyed to required shade accordingly to IS : 1868, minimum coating to grade AC-15 (AC-Fifteen), fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetera with EPDM rubber /neoprene gasket etcetera (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm (Five millimetre) thickness (weight not less than 12.50 kg/ sqm) (Twelve point five zero kilogram) per sqaure metre) of Modi Guard / Sanit Gobain make complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetera with EPDM rubber /neoprene gasket etcetera (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 6 mm (Six millimetre) thickness (weight not less than 15.00 kg/ sqm) (Fifteen kilogram per sqaure metre) of Modi Guard / Sanit Gobain make complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetera with EPDM rubber /neoprene gasket etcetera (Cost of aluminium snap beading shall be paid in basic item): with froasted glass panes of 4 mm (Four millimetre) thickness (weight not less than 10.00 kg/ sqm) (Ten kilogram per sqaure metre) of Modi Guard / Sanit Gobain make complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Fly proof stainless steel wire gauge to doors, windows and clerestory windows with M.S. flat 15x3mm (Fifteen into three millimetre) and nut and bolts complete stainless steel (Grade-304) wire gauge of 0.5mm (Zero point five millimetre) dia wire and 1.4mm (One point four millimetre) wide aperture with matching wood beading on both side complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 8mm (Eight milimetres) thick anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm (Two hundred millimetre) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete including entire carriage of materials within all leads, lifts and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. channels Frames 75 X 40 X 4 mm ( seventy five into forty into four milimetre) M.S. angle iron 25 X 20 X 3 mm ( twenty five into twenty into three milimetre) for doors, dormor, windows, frames manufactured from M.S. T - section 25 mmx 25 mmx 3 mm ( twenty five milimetre into twenty five milimetre into three milimetre) and Z- Sections with M.S. flat 75mmx4mm ( seventy five milimetre into four milimetre) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold of M.S. angles means lugs, with split end tails to each jamb including iron butt hinges 2.5mm ( two decimal five milimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30mm(Thirty millimetre) thick factory made PVC panelled door shutter Rajshri / Prominance/Supreme consisting of frame made out of M.S. tubes of 19(Nineteen) gauge thickness and size of 19mmx19mm (Nineteen into nineteen millimetre) for styles and 15mmx15mm (Fifteen into Fifteen millimetre) for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame overed with 5mm (Five millimetres) thick heat moulded PVC "C" channel of size 30mm (Thirty millimetres) thickness, 70mm (Seventy millimetre)width out of which 50mm(Fifty millimetres)shall be flat and 20mm(Twenty millimetre)shall be tappred in 45 (Forty five) degree angle on either side forming style and 5mm (Five millimetre) thick, 95mm (Ninety five millimetres) wide, PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimetres) shall be tapered in 45 (Forty five) degree on the inner side to form top and bottom rail and 115mm (One hundred fifteen millimetres) wide PVC sheet out of which 75mm (Seventy five millimetres) shall be flat and 20mm (Twenty millimetres) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (Ten millimetres) thick, 20mm (Twenty millimetres) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (Five millimetres) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails with 7mm (Seven millimetre) 5mm+2mm (Five millimetre plus two millimetre) thick 15mm (Fifteen millimetre) wide PVC sheet beading on inner side and jointed together with solved cement adhesive. An additional 5mm (Five millimetre thick PVC stips of 20mm (Twenty millimetre) width is to be stuck on the enterior side of the "C" channel using PVC solvant adhesive etcetera complete as per direction of Engineer-in-Charge, manufactures, specifications and drawing within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetres) thick Phenol bonded both side prelaminated BWP grade ply board in matt finish flat pressed three layer of graded wood particle board Confirming to : IS No. 12863 as per of Action Tesa / Greenlam / Merinolam / Kitlam / Vista approved shade Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera; complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 25 mm (twenty five millimetre) thick water proof ply board of century ply (ISI marked) with 6 mm (six millimetre) thick hard wood edging all round and PGI sheet linning inside for FF / SDB including fixing with nickel plated piano hinges with screws etcetra complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing the complete box of cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves.Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm (One millimetre) thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof comercial board of Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino including hinges, PTMT handle in wood colour of Prayag Polymers, knob megnatic catcher complete (Outer face of cup board shall be measured and paid for) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen millimetres) size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts with necessary screws etcetera including carriage of material within all leads, lifts and other. incidentals. as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium Tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with nuts and screws etcetera. complete, including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

200x10mm ( two hundred into ten milimetres) size

150x10mm ( two hundred into ten milimetres) size

Providing and fixing ISI marked aluminium Handles anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five milimetres) size

100mm (One hundred milimetres) size

Providing and fixing 250mm ( Two hundred fifty millimetre) Aluminium hooks and eyes complete including carriage of material as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS No. 3564, embossed on the body, door weight upto 35 kg ( thirty five kilogram) and door width upto 700 mm ( seven hundred milimetres), with necessary accessories and screws etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government. other taxes imposed by the Government.

Providing and fixing aluminium hanging twin rubber floor door stopper ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five milimetre) dia stainless steel curtain rod having wall thickness of 1.25mm (One point Two Five millimetres) with the stainless steel plated brass brackets fixed with stainless steel screws etcetera where ever required for pelmet with necessary fittings complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing staircase railing having hand rail 50mm (Fifty milimetres) diametre fixed with 35mm (Thirty five millimetre) diametre stainless steel pipe as per detail in combination of 35mmx35mm (Thirty five millimetre into Thirty five millimetre) stainless steel square pipe and 15/20mm (Fifteen /Twenty millimetre) stainless steel balusters in staircase complete in all respect. The aplication shall be done as per specifications, approved drawing, design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing hand rail 50mm (Fifty milimetres) diametre stailess steel hollow pipe hand rail slip resistant with round ends at two level at 75cm to 90cm (Seventy five centimetre to Ninety centimetre) height weldded to 25mm (Twenty five millimetre) dia stainless steel hollow pipe baluster. It should extend 30cm (Thirty centimetre) beyound the top and bottom of ramp as per detail of approved drawing, design specifications complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Structural steel work of Tata / Sail / Reliance/Jindal riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying mirror polished 25 mm (twenty five millimetre) thick Kota stone minimum Size 55X55cm / 55 X 27.5 cm (Fifty five into fifty five oblique fifty five into twenty seven point five centimetre) of uniform colour with 7.5 cm (seven point five centimetre) wide Jaislmer Yellow marble band (NTC /Johnson ) of same shade that of flooring of approved shade as per detail laid 20 mm (twenty millimetre) (average) thick base of cement mortor1:4 ( One cement isto four sand) over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 600x600 mm (Six hundred into six hundred millimetre) Double Charged / Ultra charged vitrified floor tiles of Restile Johnson/ Nitco/ Rak / Kajaria / AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office (thickness to be specified by the manufacturer) with water absorption less than 0.08% (Zero pint zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty milllimetre) thick cement mortar 1:4 (One cement isto Four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera; complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 600x600 mm (Six hundred into six hundred millimetre) Full Body Matt finish vitrified floor tiles of Restile /Johnson/ Nitco/ Rak / Kajaria / AGL / Simpolo / Somany /Orient & Bell as per approved shade and design of the office (thickness to be specified by the manufacturer) with water absorption less than 0.08% (Zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One cement isto Four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete flooring 40mm (Forty millimetre) thick with 20mm (Twenty millimetre) nominal size stone aggregate 1: 2:4 (One cement isto Two coarse sand isto Four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etcetra complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 2mm (two millimetre) thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Precast terrazzo tiles automatic Hydraulic compressed and polished of NTC/UNISTONE/AILANTIC in Flooring size 30x 30x2.5cm (Thirty into thirty into two point five centimetre) ISI marked No IS: 1237 top layer in (50%) (Fifty Percent) white and 50% (Fifty percent) Grey cement ) in white yellow , green and maroon chips of size 0,B and 2B size of NTC as per approved shade with marble chips of specified sizes laid on a bed of 25mm (Twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300 mm (three hundred into three hundred millimetre) Antiskid Cermic Tiles of Premimum quality of Nitco/ Rak / Kajaria/ Johnson /AGL / Somany/ Orient Bell in flooring laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete, including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19 mm ( Nineteen milimetres) thick polished Grey / Chima pink Granite having semi round nosing as per detail gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, reception workstop and similar locations of required size, approved shade, colour and texture laid over 20 mm ( twenty milimetres) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete, including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19 mm ( Nineteen milimetres) thick polished Chima pink Granite Single having double round nosing / edging in tread of steps And single slab in riser of steps as per detail gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, reception workstop and similar locations of required size, approved shade, colour and texture laid over 20 mm ( twenty milimetres) thick base cement mortar 1:4 (one cement isto four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera complete, including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre) Labrador desgin (Rainbow Series) of NTC/Unistone/Atlantic slab flooring 40mm (Forty millimetre) average thickness on 20mm (Twenty millimetre) average thick fixed base cement mortar 1:3 (One cement isto Three cement) jointed with cement slurry mixed with pigment to match the shade of tile including rubbing and polishing, cutting and moulding complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 60mm (sixty millimetre) thick factory made cement concrete interlocking paver block of NTC / Unistone / Atlantic vibro compacted upto M50 (M-fifty) grade including border or kurb block grey or coloured over sub-base of concrete with 25mm (twenty five millimetre) thick average thickness of cement mortar 1:4 (one cement isto four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Kota stone slabs 20 mm (twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12 mm (Twelve millimetre)(average) thick cement mortar 1:3 (one cement isto three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) Full body matt finish Vitrified tiles of Restile / Johnson/ Nitco/ Rak / Kajaria / AGL / Simpolo / Somany /Orient Bell as per approved shade and design of the office (thickness to be specified by the manufacturer), with water absorption less than 0.08% ( zero decimal zero eight percentage) and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm ( six milimetres) thickness, including grouting of joints as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 600x600 mm ( six hundred into six hundred millimetre)Double Charge / Ultra Charge Vitrified tiles of Restile /Johnson/ Nitco/ Rak / Kajaria / AGL / Simpolo / Somany /Orient Bell as per approved shade and design of the office (thickness to be specified by the manufacturer), with water absorption less than 0.08% ( zero decimal zero eight percentage) and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm ( six milimetres) thickness, including grouting of joints as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 2mm (two millimetre) thick PVC antistatic venyl sheet in skirting plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Precast terrazzo tiles automatic Hydraulic compressed and polished of NTC in skirting 30cmx10cm (Thirty centimetre into ten centimetre) ISI marked No IS: 1237 top layer in (50%) (Fifty Percent) white and 50% (Fifty percent) in white, yellow, dark, green and maroon chips of size 0,B and 2B (NO SG - 403B) size with marble chips of specified sizes laid on a bed of 25mm (Twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x450 mm / 300X600mm ( Three hundred into four hundred fifty millimeter / Three hundred into Six hundred millimeter) Ceramic Glazed tiles of Kajaria / Johnson /Swastik /Bell / Somany / AGL in Dado / Skirting with Granite semi round moulding in top of approved shade (thickness to be specified by the manufacturer), of 1st (first) quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three decimal three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x450 mm ( Three hundred into Four Hundred fifty Millimeter) Ceramic Glazed floor tiles of Kajaria / Johnson /Swastik /Bell / Somany / AGL as per approved shade (thickness to be specified by the manufacturer), of 1st (first) quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre thick cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three decimal three kilograme per square metre) including grouting the joints with white cement and matching pigments etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 300x450 mm ( Three hundred into Four Hundred fifty Millimeter) Ceramic Glazed floor tiles of Kajaria / Johnson /Swastik /Bell / Somany / AGL with one border matching / contrast at the top as per approved shade (thickness to be specified by the manufacturer), of 1st (first) quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three decimal three kilograme per square metre) including grouting the joints with white cement and matching pigments etcetera complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic tile cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding and cost and carriage of material and as per specifications, approved drawing, design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (sixty millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA Durashine/ Sail /Reliance/Jindal over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet, rubber washers complete with all accessories as required including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing pre-painted steel sheet ridge (factory made) having proper Gola shape of corrugation of steel sheet or hips of TATA Durashine/ Sail/ Reliance/Jindal 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing pre-painted sheet valleys 90cm (Ninety centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA Durashine/ Sail/ Reliance/Jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) mocrons over 5 (Five) microns coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted limpet and bitumen washers complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Mild Steel fan clamp type I or II of 16 mm dia (sixteen millimetre diametre) M.S. bar, bent to shape with hooked ends in Reinforced cement concrete slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plain M.S. (mild steel) B.P. sheet 2mm (Two millimetres) thick of TATA/SAIL/RELIANCE /JINDAL for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gas/electric welding with steel roof member and applying a coat of red led primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (zero decimal six zero millimetre) thick sheet fixed with bolts, nuts and washers etcetra having dome shape gratting including making necessary connections with rain water pipe complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flashing 38cm (Thirty eight centimetre) overall with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of Tata/sail/Reliance/ Jindal with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia meter & prepainted G.I. limpet & bitumen washers complete. as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimetre) diametre high pressure P.V.C spigot and socket Rain water pipe of Supreme/Finolex/Vectus /Relpipe (reliance) working pressure not less than 6 kg/cm2 ( Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge, within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme/Finolex/Vectus /Relpipe (reliance) including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. The rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) diametre PVC Plain Bend

150mm (One hundred fifty millimetres) diametre PVC Plain Shoe

Providing and fixing unplasticised - PVC pipe clips of Supreme/Finolex/Vectus /Relpipe (reliance) of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm ( fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement isto four coarse sand) and making good the wall etcetera complete, as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x600x6mm (six hundfred into six hundred into six millimetre) Everst fibre cement board ceiling panel with pre-painted GI channel framing @ 600mm (at the rate six hundred millimetre) centre to centre complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto Six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per PWD specification,approved drawing, design including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including of Octroi, Royality, Malkana, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:5 (one cement isto five sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying 15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on fair side of brick/concrete/ stone walls for exterior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement isto Three sand) upto all floor levels complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall with Fine dune /Dune finish of NCL Alltek / Spectrum Textured wall finish Natural grit of Heritage having coating thickness 1.5mm (one decimal five millimetre) on undecorated wall surfaces to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying two coats of Acrylic Washable emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per Architectural drawing ,design and specifications and as per the direction and entire satisfaction of of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with Premium emulsion paint of Asian / Dulux /Berger paints/Nerolac paints (above Dado/skirting) of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting ( two coats) with Acrylic emulsion of Asian paints/Berger paints /Nerolac paints (above Dado/skirting) finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting ( two coats) with Epoxy Resin Paint of Pidilite (above Dado/skirting) finish for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat i/c necessary putty to give smooth even surface, sand papered smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying white cement based putty of J.K./ Birla White average thickness 1 mm ( One millimeter) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of Nerolac / Asian brushing of approved shade to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two coats (excluding priming coat) on over new wood and wood based surfaces with enamel paint of Nerolac/ Asian brushing to give an even shade including cleaning the surfaces of all dirt, dust andother foreign matter as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Forming groove of 15 mm (fifteen millimetre) wide and 15 mm (fifteen millimetre) deep groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

20 mm (twenty millimetre) Pattern in cement Plaster With cement Mortar :1:4 (one cement isto four coarse sand) as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection with 40 mm ( Fourty millimetre) thick interlocking tiles/ cement concrete paver block with 23 cm ( twenty three centimetre) dia half round RCC pipe for drainage purpose laid over 10cm (ten centumetre) thick cement concrete 1:4:8 ( one cement isto four sand) isto eight graded/ crushed stone aggregate) in bedding/ haunching complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium / Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (One) metre spacing. This includes testing of joints complete for concealed work, including cutting chases and making good the wall etcetera as per specifications, approved drawing, design and including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1620 (20mm (Twenty millimetres) Outer diameters pipe

2025 (25mm (Twenty five millimetres) Outer diameters pipe

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 25mm to 40nmm (Twenty five millimetres to Forty millimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor galvanized mild steel tube fitting and clamp including making good the wall, ceiling and floor 20 mm (twenty millimetre) nominal bore as per specifications, approved drawing, design and including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC holder bat clamps for P.V.C pipes embedded in and including cement concrete blocks 100x100x100cm (One hundred into One hundred into One hundred centimetre) of cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size and cost of cutting holes and making good the walls etcetera; including filling the joints complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres

110mm (One hundred ten millimetres) nominal bore/diametres

Providing and fixing in trenches P.V.C. pipe of Diplast / Finolex / Relpipe (Reliance)/ Victus class "A" soil, waste and ventilating pipes conforming to IS No- 13592-92 fixing with adhesive mixure complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres

110mm (One hundred ten millimetres) nominal bore/diametres

Providing and fixing PVC plain bend of Finolex , Relpipe (Reliance ) , Vectus for PVC pipes of approved design including cutting & filling the joints with approved adhesired complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres

110mm (One hundred ten millimetres) nominal bore/diametres

Providing and fixing PVC tees (medium class) of D-Plast ISI marked of Finolex , Relpipe (Reliance ) , Vectus approved design including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres

110mm (One hundred ten millimetres) nominal bore/diametres

Providing and fixing P.V.C. heal rest ISI marked of Finolex , Relpipe (Reliance ) , Vectus Confirming to IS no-14735-99 including filling the joints with approved adhesive, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres

110mm (One hundred ten millimetres) nominal bore/diametres

Providing and fixing PVC collars ISI marked of Finolex , Relpipe (Reliance ) , Vectus approved design including fixing with approved adhesive etcetra including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres

110mm (One hundred ten millimetres) nominal bore/diametres

Providing and fixing P.V.C. Cowl of Finolex , Relpipe (Reliance ) , Vectus ISI marked Confirming to IS No-14735-99 including fixing with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimetres) nominal bore/diametres

110mm (One hundred ten millimetres) nominal bore/diametres

Providing and fixing 110 x 90 mm (one hundred ten into ninety millimetre) nominal size/diameter P.V.C. floor trap ISI marked of Finolex , Relpipe (Reliance ) , Vectus to BIS-14735-99 of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etc complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type)No 20092 (S - 10 ) 61.5x34.5x40 cm (Sixty one point five into Thirty four point five into forty centimetre) with seat and lid, 10 litre (Ten) low level white PVC flushing cistern (sleek Plus) having dual flush system of Hindware/ Cera /,Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm ( Forty Millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) star S No 20087 (S - 10 ) Size 57 X 35 X 39 cm (Fifty seven into thirty five into thirty nine centimeter ) with seat and lid, 10 litre (Ten) low level white PVC flushing cistern (sleek Plus) having dual flush system of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm ( Forty Millimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm (Five hundred thirty into Four hundred ten millimetre) with integral type foot rests with 100 mm (One hundred millimetre) dia sand cast Iron P or S trap, 10 litre (Ten) low level P.V.C. flushing cistern having dual flush system of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and Fixing Charomium plated 40mm (forty millimetres) dia steel pipe for grab bars at 78cm (seventy eight centimetres) height metres M.S. plate as per details at the position of the seat and Wash Basin complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back wash basin Neptune no 10072 size 550x480x 860 mm (Five hundred fifty into four hundred eighty into Eight hundred sixty millimetre) dia of Cera / Hindware / Jaquar with single 15 mm (Fifteen millimetre) C.P. brass pillar tap with C.I. brackets, 15 mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back wash basin Delta No 10010 size 550x 400 mm (Five hundred fifty into four hundred millimetre) (Under counter Basin ) Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm (Fifteen millimetre) C.P. brass pillar tap with C.I. brackets, 15 mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (Thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back Matrix wash basin 550x 400 mm (Five hundred fifty into four hundred millimetre)of Cera / Hindware / Jaquar with single 15 mm (Fifteen millimetre) C.P. brass pillar tap with C.I. brackets, 15 mm (Fifteen millimetre) C.P. brass pillar taps, 32 mm (Thirty two millimegtre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required including necessary fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details for wash basin completely recessed at the back for the reception of pipes and fittings including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type Matour water closet (European type) with seat and lid, 10 ( Ten) litre low level PVC flushing cistern ( sleek plus) of Hindware/Cera/Jaquar of star white/Snow white shade and shown in the drawing as per details and C.P flush bend with fittings of C.I bracktes 40mm ( forty millimeter) flush bend, over flow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete, including painting of fitting and brackets, cutting and making good the walls and floors wherever required including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) nominal size/diametres rubber plug for wash basin including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres M.I. Union for waste pipe of wash basin or sink including necessary complete, including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres C.P brass waste of contiental series of Jaquar/contess pluss series of Hindware/ocean series of Cera/ Vintage series of Kerovite & Hindon Series of Jal for wash basin or sink including necessary complete, including fitting entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal for gully floor or Nahni trap including entire carriage of material within all leads, lifts and other incidental as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetres) beveled edge mirror of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of superior glass (of approved quality) complete with 6 mm (Six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass Towel rail 600x20mm (Six hundred into Twenty millimetres) of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour etcetera including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120x5mm (Six hundred into One hundred twenty into five millimetres) glass shelf of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (Fofrty millimetre) long screws, rawl plugs etcetera including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass soap dish of Continental series of Jaguar/Contress series of Hindware/Ocean series of Cera/Vintage series of Kerovite/Hindon Series of Jal with C.P. brass brackets fixed with wooden cleats with C.P. brass screws including necessary fitting complete including entire carriage of material within all leads, lifts and other incidental as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass each toilet paper holder of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass pillar tab cock (concealed) of Continental series of Jaquar / contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS:8931 including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (Fifteen millimetre) diametre / nominal bore C.P. brass bib cock tap of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of approved quality conforming to IS:8931 :including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (Fifteen millimetre) diametre / nominal bore ISI marked C.P. brass superior bib tap of Continental series of Jaquar / contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal approved qualtiy complete. including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (Fifteen millimetre) nominal bore C.P. brass stop cock (concealed) Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS:8931 including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (Fifteen millimetre) nominal bore C.P. brass angle valve of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of approved quality conforming to IS:8931 including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass full way valve of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of approved quality conforming to IS:8931 including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15 mm (Fifteen millimetre) nnominal bore

20 mm (Fifteen millimetre) nnominal bore

Providing and fixing 15mm (Fifteen millimetres) nominal bore C.P. brass valve (Horizontal plunger type) high pressure with polythene plastic floats of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal etcetera including necessary fitting complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length of Finolex , Relpipe (Reliance ) , Vectus complete including necessary fitting complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. water storage tank (four layers) having capacity of 1000 (One thousand) liters of ISI 12701 marked Sintex / Finolex / Relpipe (Reliance) / Vectus with G.I. (Galvanised iron) inlet and outlet connection, 15mm (Fifteen millimetres) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level as per direction of Engineer-in-charge including carriage of material within all leads, lift and other incidentals.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 150mm (One hundred fifty millimetre) nominal bore/diameters to level or slopes PVC pipe of Finolex , Relpipe (Reliance ) , Vectus for sewerage pipe and jointing with approved adhesive complete as per specifications, approved drawing, design and as directed by the Engineer-in-charge including carriage of material within all leads, lift and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry manhole with Sewar bricks conforming to IS 4885 in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (One cement isto one decimal five coarse sand (zone- III) isto three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement isato three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm (opne hundred twenty into ninety centimetre) and 90 cm (Ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm (Ffve hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogramme) (weight of cover 58 kg (fifty eight kilograme) and weight of frame 58 kg (fifty eight kilograme) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry manhole with Sewar bricks conforming to IS 4885 in cement mortar 1:4 ( one cement isto four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement isto one decimal five coarse sand (zone- III) isto three graded stone aggregate 20 mm ( twenty milimetres) nominal size), foundation concrete 1:4:8 mix (one cement isto four coarse sand (zone- III) isto eight graded stone aggregate 40 mm ( forty milimetres) nominal size), inside plastering 12 mm ( twelve milimetres) thickness with cement mortar 1:3 (one cement isto three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm ( twenty milimetres) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm ( ninety into eighty milimetres) and 45 cm (forty five centimetres) deep including C.I. cover with frame (light duty) 455x610 mm ( four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg ( twenty three kilogram )and weight of frame 15 kg ( fifteen kilogram) as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china flat back half stall urinal large flat back No. 60002 of size 39x37.5x59cm (Thirty nine into Thirty seven point five into fifty nine centimetre) of Hindware/ Cera / Jaquar of star white / Snow white shade with white PVC flushing cistren having dual flush system with fittings standard size C.P. brass flush pipe, spreadres urinal and cams (All in brass) with waste fittings as IS 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and in making good the wall and floor whreever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Single half stall urinals with 5 (five) litre P.V.C. automatic flushing cistern

Range of two half stall urinals with 5 (five) litre P.V.C. automatic flushing cistern

Range of three half stall urinals with 10 (ten) litre P.V.C. automatic flushing cistern

Providing and fixing white vitreous china Division plate of Hindware/ Cera/ Jaquar of star white / Snow white shade and as shown in the drawing / as per details urinal with integral rim longitudinal flush pipe. including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 8 mm (Eight millimetre) dia C.P. / S.S. Jet of Continental series of Jaquar / Contess plus series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal with flexible tube upto 1 mtr (One metre) long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved including necessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of Diamond / Unik Kitchen sink with drain board 510x1040 mm (five hundred ten into one thousand forty millimetre) bowl depth 250 mm (two hundred fifty millimetre) with C.I. brackets and stainless steel plug 40 mm (forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china laboratory sink size 450x300x150 mm (four hundred fifty into three hundred into one hundred fifty millimetre) with C.I. brackets, C.P. brass chain with rubber plug, 40 mm (forty millimetre) C.P brass waste and 40mm (forty millimetre) C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing masonry Chamber with common burnt clay F.P.S (non modular) bricks of class designation 7.5 (Seven point five) of size 60x60x75 cm (Sixty into sixty into seventy five centimetre) inside, in brick work in cement mortar 1:4 (One cement isto Four coarse sand) for sluice valve, with C.I. surface box 100mm (One hundred millimetre) top diameter, 160 mm(One hundred sixty millimetre) bottom diameter and 180 mm (One hundred eighty) deep ( inside) with chained lid and RCC top slab 1:2:4 mix (One cement : Two coarse sand : Four graded stone aggregate 20mm (twenty millimetre) nominal size including necessary excavation, foundation concrete 1:5:10 (One cement isto Five fine sand isto ten graded stone aggregate 40mm (Forty millimetre) nominal size) and inside plastering with cement mortar 1:3 (One cement isto three coarse sand) 12 mm (Twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing masonry Chamber with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (Seven point five) 30x30x50 cm (Thirty into thirty into fifty centimetre) inside in cement mortar 1:4 (One cement isto Four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (One hundred into One hundred Seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty millimetre) nominal size including necessary excavation, foundation concrete 1:5:10 (One cement isto Five fine sand isto ten graded stone aggregate 40mm (Forty millimetre) nominal size and inside plastering with cement mortar 1:3 (One cement isto three coarse sand) 12mm (Twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (One cement isto Five sand isto Ten graded crushed stone aggregate 40mm (Forty millimetres) nominal size) in bedding for PVC pipe of 150mm (One hundred fifty millimetres) internal diametre including necessary form work and curing complete including testing of pipes and joints complete including carriage of material as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.I cover light duty rectangular 455x610 mm (Four hundred fifty five into Six hundred ten millimetre) with frame cover weight not less than 38 kg (Thirty Eight kilogram (single seat) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven decimal five) in cement mortar 1:5 (one cement isto five coarse sand) C.I. cover with frame (light duty) 355x610 mm (Three hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg (fifteen kilograme) ), R.C.C. top slab with 1:2:4 mix (One cement isto two sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:5:10 (One cement isto five fine sand isto ten graded stone aggregate 40 mm (twenty millimetre) nominal size), inside plastering 15 mm (fifteen millimetre) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetra complete as per standard design including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4: 8 (One cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimetres) nominal size) in bedding for PVC pipe of 110mm (One hundred ten millimetres) internal diametre including necessary form work and curing complete including testing of pipes and joints complete including carriage of material as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 110mm (Onehundred ten millimetre) nominal bore/diameters to level or slopes PVC pipe of working paressume not less then 4.5 kg/sqm ( Four point fove kilogram per square meter) Finolex , Relpipe (Reliance ) , Vectus for sewerage and jointing with approved adhesive complete including carriage of material within all leads, lift and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing water lifting pump 1.00 H.P. (one mhorse power) including all necessary fittings including carriage of material within all leads, lift and other incidental as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal size/ dia to wall, ceiling and floor galvanized mild steel tubes (medium grade) including all tube fitting such as nipples, elbows, unions, tees and clamps including making good the wall, ceiling and floors complete including carriage of material within all leads, lift and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying C.I cover light duty rectangular 600x450 mm (six hundred into four hundred fifty millimetre) with frame weight not less than 58 kg (fifty eight kilogram (single seat) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Nishchal Mahajan

ANIL MAHAJAN