Providing wood work, tile and rubbing of old chips flooring, sanitary installation, distempering and painting work etc. In Type IV-EB/24 Type-III-EB/14 HPSEBL Colony at Sundernagar

Demolishing cement concrete manually /by mechanical means and disposal of material within 50mtrs. Lead as per direction of Engineer in charge

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead :Of area 3 sq. metres and below

Dismentling tile work in floors and roofs laid in cement mortar including stacking of material within 50 mtrs lead.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:3:6 (1cement :3coarse sand):6graded stone aggregate 20mm nominal size)

Providing and fixing 10mm thick acid and /or alkali resistant tiles of approved make and colour using acid and /or alkali resisting mortor bedding ,and joints filled with acid and /or alkali resisting cement as per IS:4457, complete as per the direction of Engineer-in charge

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastners shall be paid for separetly

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- butt hinges and necessary screws shall be paid separately) second class deodar wood : 35mm thickness shutters in

P/F aluminium tower bolts ( nodiz type) nodized transparent or dyed to required shade and colour with screws etc. complete For doors (150*10mm)

P/F aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete For doors (125mm)

Removing dry or oil bound distemper water proofing cement paint and the like by scrapping , sand papering and preparing the surface smooth including necessary reapirs to scratches etc. Compelete.

Distempering with oil bound distemper of approved brand and manufacture to give an even shade :- new work ( two or more coats ) over and including water thinnable priming coat with cement primer

Painting wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture

Sanitary works:- Providing and fixing floor mounted white vitreous china single piece,single traps syphonic water closet of approved brand/make, sape size and pattern including interfared white vitreous china cistren cera/equvalent make size 670x360x680 mm ivory white of capacity 10liters with dual flushing systeran,including aii fiting with seat cocer, cistern fitting nuts bolts and gaskets etc. including making connection with the existing P/S trap,including dismantling of existing one complete in all respect as per direction of Engineer-in -charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (Cera or Hindware make)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 32 mm dia, PVC waste pipe flexible (coil type) length not less than 800 mm.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Poviding and fixing uplasticised PVC connection pipe with brass unions 45 cm long 15mm nominal bore

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm dia. in all respect

Providing and fixing PTMT High quality duel hanging bath room mirror of 4 mm thick glass of approved quality and colour with steel screws and rawl plugs etc complete :- size 600 x 450 mm

Providing and fixing C.P. brass towell rail (Cera/Hindware/Jal or equivalent brand) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws. 600 x 20 mm

Providing and fixing C.P. brass soap dish (Cera/Hindware/Jal or equivalent brand) with C.P. brass brackets fixed to wooden cleats with C.P. brass screws.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWAG116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90° For 15.88mm outer dia pipe

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWAG116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineer-in-charge. Elbow 90° For 22.22 mm outer dia pipe

Providingandfixing nioninG.I.pipeincludingcuttingandthreadingthepipe and making long screws etc. complete (New work) : 15 mm nominal bore

Providing and fixing G.I. Unionin G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore

Providing and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWAG116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineerin-charge.Providing and fixing G.I.tee 15.88 mm dia

Providingiding and fixing required Stainless Steel Fitting of press fit design of grade AISI 304 conforming to JWWAG116 standard with V-profile or M-profile and with O-ring sealing gasket of EPDM material of required dia as per direction of Engineerin-charge.Providing and fixing G.I.tee 22.22 mm dia

Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL-PE Composite Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia

40mm thick marble chips flooring rubbed and polished to granolithic finish, including cement slurry etc. complete Dark shade pigment with ordinary cement

Please Enable Macros to View BoQ information