Tender For Proposed Vendor Zone At Masonic Lodge Parking Mussoorie

Steel work welded in built up section/framed work including cutting in position and appying a priming coat of approved steel primer us required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Stone work(machine cut edges) for wall lining etc.(veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3( 1 cement :3 coarse send) including pointing in white cement mortar 1:2( 1white cement: 2 stone dust) with an admixture of pigment matching the stone shades by white sand stone - Exposed face machine cut and table rubbed with rough backing.

providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modifield quick set tile adhesive(water based) conforming to IS: 15477,in average 6 mm thickness, including including grounting of joints(payment for grouting of joints to be made separately). Size of Tile 600X600 mm

Providing and fixing ISI marked flush door shutters conforming to IS: 2202(Part1) non-decorative type, core of block board constuction with frame o wood and well matched commercial 3 ply veneering with vertical g bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing aluminum sliding door bolts ISI marked anodi coating not less graed AC 10 as per IS: 1868) transparent or colour or shade with nuts and screws etc. complete. 300x16mm

Providing and fixing aluminum handles ISI marked anodised (anod less thand grade AC 10 as per IS:1868) transparent or dyed to req shade with necessary screws etc. complete:125 mm

Providing and fixing aluminium tower bolts ISI marked anodised ( a not less than grade AC 10 as per IS:1868) transparent or dyed t or shade with necessary screws etc. complete. 250x10mm

Providing and fixing aluminum hanging floor door stopper ISI markedanodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer.

Finishing wall with textured exterior paint of required shade. New work (Two or more coats applied @3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm.

Finishing with Deluxe Multi surfacec paint system for interiors and exteriors using primer as per manufacturers specifications: painting steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture.

Finishing with Deluxe Multi Surface paint system for interiors and exteriors using Primer as per manufacetures specifications: painting Stell work with Deluxe Multi Surface Paint to give an even shade. Two or more coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

Providing and applying plaster of paris putty of 2 mm thickn plastered surface to prepare the surface even and smooth complet.

Providing & fixing glass panels with putty and glazing clips in steel doors, windows all complete. With 4.0 mm thik glass panes.

Windows using galvanised M.S wire gauge with average width of a in both directions with wire of fia. 0.63 mm. with 12 mm mild steel U beading.

Steel work in built up tubular( round, squre or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved ateel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.

Providing and fixing of external wall system on Light gauge steel frame work with. Uter face having 6mm thick heavy duty fiber cement board fixed on 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category IV type A(High pressure steam cured) aas per standard sizes fixed with self-drilling/taping screws/fasteners @ 60 cm c/c of approved make. A grove of 2 mm to 3 mm shall be maintained and grove shall be sealed with silicon based sealant. The board shall be fixed in staggered pattern. Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick of 8 to 10 gauge of lenghth varying from 25 to 45 mm and internal face 12.5 mm thick gypsum plaster board fixed on 8 mm thick fiber cement board confirming to IS 14862:2000 of category III type B( High pressure stream cured) as per standard sizes fixed with self-drilling/taping screws/fasterners @ 60 cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compund for seamless finish.(cost of frame work to be paid for separately)

Providing and fixing internal wall panels on Light gauge steel frame work with 12.5 mm thick gypsum plaster board conforming IS 2095:2011 fixed on 8 mm thick fiber cement board conforming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling/taping screws/fasterners @60 cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(coast of frame work to be paid for separately)

Supplying and fixing rolling shutters of approved make, made of required size M.S laths interlocked througher through their entire lengh and jointed together at by end locks, mounted on specially desinged pipe shafy with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strengh confrming to IS : 4454-part 1 M.S top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.50%) total coated thickness, Zinc caoting 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polester top coat 15-18 microns using self drilling/ self tapping screws complete:Gutter (600 mm over all girth)

Providing and fixing of 12mm thick heavy duty fiber cement board fixed confirming to IS 14862:2000, category IV type A (High pressure stram cured) as per standard sizes fixed with self-drilling/ taping screws/fasterners @ 60 cm c/c of approved make. A grove of 2 mm to 3 mm shall be maintained and groves sealed with silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm

Providing and fixing of Roof shingles Ridges plain on Light gauge steel frame work with. Approved by Engineer-in-Charge.(Sand Gobin & etc)

Providing and fixing of Roof Shingles on Light gauge steel frame work with. Approved by Engineer-in-Charge.(Sand Gobin & etc)

Chequerred precast cement concrete tiles 22 thick in footpath & countyard, jionted with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cemnent mortar 1:4( 1cement:4 coarse sand).

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1:4:8 ( 1 Cement:4 Coarse sand: 8 graded stone aggregate 40 mm nominal size).

Supplying and fixing Murga mesh of size for floor/roof slab concrete screed over the micro beams as reiforcement. The weld mesh shall be fixed as per drawing.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required lenght and of size 24x38 mm made from 0.30 mm thick(minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick(minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick(minimum)sheet to interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall agnle of size 24x24x0.3 and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for service like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27X37X25X1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasterners, 4 mm GI adjestable roads with galvanizied butterfly level clips of size 85x30x0.8mm spaced at 1200 mm center to center along main "T", bottom exposed widh of 24 mm of all T section shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to given stable crystalline structure with minimum compressive strength 225 kg/sq cm bending

WGPVCPT Point wiring in PVC conduit, with piano type switch: wiring for light point / fan point /Ex Fan Point/Call Bell Point recessed PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm FR PVC insulated copper conductor single core cable etc. as required. Group C

LPACCPT S / F light plug point piano type accessories: Supplying and fixing metal box of 150 mm x 75 mm x 60 mm deep(nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 anos socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.( For light plugs to be used in non residential buildings).

PPACCPT S/F power plug point piano type accessories: Supplying and fixing matel box of 180 mm x 100 mm x 60 mm deep on surface or in recess with 15 Amp piano type switch and socket. Complete with all work

MCBDPSOC20 S/F 20A SPN MCB industrial socket outlet: Supplying and fixing 20amps, 240 volts, SPN industrial type, socket outlet, with 2 pole

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq mm earth wire.

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq mm earth wire.

WGPVCSB Circuit/sub-man wiring in PVC conduit: Wiring for circuit/ submain wiring along with earth wire with the following size of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 4 x 2.5 sq. mm + 2 x 2.5 sq mm earth wire.

CREB S / F Ceiling rose : Supplying and fixing 3 pin 5amp ceiling rose including connection etc. as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

TPMCBDB S/F TP MCB DB:4 way (4 +12), Double door, hotizontal type

MCBC S/F C series SP MCB S/F 5 amo 32 amp rating,240V C series MCB on existing DB complete with connections.

MCBTPIS S/F TP MCB isolator : S/F 100 amp rating ,415V isolator on existing DB complete with connections.

S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16S.W.G. M.S. sheet incorporating 10mm dia. M.S. bar round and duly painted with red oxide along with all work

Eraction testing of ceiling fan etc excluding supply of down rod complete in all respect

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 100 mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I, rain water pipes embedded in and including cement concrete blocks 10x10x 10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc.100 mm diameter.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fitting.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. internal work - Exposed on wall 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. 20 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser approved quality conforming to IS:8931.15 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls

Providing and placing on terrace (at all floor levels) polyethylene water tank ISI : 12701 marked with cover and suitable locking arrangement in tank. and necessary holes for inlet, outlet and overflow pipes but without fitting base support for tank.

Providing and fixing PTMT soap Dish Holder having length of 138m 102mm, height of 75mm with concealed fitting arrangements weig than 106 gms.

Providing and fixing 600x450 mm bevelled edge mirror of superior quality) complete with 6 mm thick hard board ground fixed to woo C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.

Providing and fixing uplasticised PVC connection pipe with brass unions. 45 cm length. 15 mm nominal bore.

Providing and fixing PTMT grating of approved quality and colour.Circular type.100 mm nominal dia.

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 15 mm nominal bore

BALWANT SINGH RAWAT

Harsh Mani Dobhal