UPHA Development Works at Anjengo Fort at Anjnego

Increasing the height of the existing laterite stone compound wall on the northern side of the monument for the safety and protection of the monument, using approved laterite stones of required size laid in lime mortar, using lime mortar 1 2, including fixing and finishing to match the existing old construction, including all materials, labour, curing, and finishing, complete as directed by the Engineer in Charge.

Providing pointing to the laterite stone masonry of the existing compound wall with approved lime mortar 1 2, after proper cleaning, and providing coping on top of the wall as per the original construction, using lime mortar 1 2, including proper formation, finishing and matching with the existing old construction, including all materials, labour, scaffolding and necessary tools and tackles, complete as directed by the Engineer in Charge.

Removing existing damaged or rusted MS grills and providing, fabricating and fixing new MS grills of approved design, including MS sections, welding, cutting, grinding, drilling and fixing, with suitable primer and two coats of approved synthetic enamel paint, complete with all materials, labour and incidental works.as per drawing

Providing, fabricating, supplying and fixing freestanding Direction Sign Board comprising SS 304 grade 75 X 75 X 2 mm SHS post, 150X150X10 mm SS 304 base plate, 4 Nos. M12 SS anchor fasteners and PCC 1 4 8 foundation of 450X450X300 mm, with 25X25X1.6 mm SS 304 frame and 4 mm ACP panel, high-intensity retro reflective vinyl graphics, complete with satin or hairline finish, fixing, erection and all incidental works.

Dismantling and removing the existing damaged and rusted MS gate at the northern side, including cutting, dismantling, removal and disposal of the dismantled materials as directed and providing, making, supplying and fixing a new wooden gate of approved design and dimensions, using good quality seasoned and preservative treated teakwood of approved quality for frames, shutters and pickets, including cutting, planning, shaping and assembling, complete with necessary wooden frame, shutters, hinges, bolts, aldrops, handles, locking arrangements and other required fixtures and hardware, including all necessary cutting, fitting, fixing and finishing applying suitable preservative treatment, primer and approved paint or polish finish as specified, including transportation, loading, unloading, labour, tools, tackles and all incidental works, complete as directed by the Engineer in Charge. As per drawing

Removing the existing damaged and rusted railing at the south eastern side inside the monument, including dismantling and disposal of the dismantled materials, and providing, fabricating, supplying and fixing new MS hand railing to the steps from ground level to the rampart top using MS pipes of approved diameter and thickness, including necessary posts, horizontal or vertical members, bends, welding, cutting, grinding, fixing, suitable primer and two coats of approved synthetic enamel paint, complete with all fittings, labour, tools, tackles and incidental works as directed by the Engineer in Charge. as per the drawing

Dismantling and carefully removing the existing damaged and undulated laterite stone pathway on the northern side near the toilet of the monument, including careful removal and stacking of reusable laterite stones, disposal of unusable debris at a suitable location away from the monument, preparation, dressing and levelling of the existing base, providing suitable bedding wherever required, and carefully resetting or relaying the laterite stones to proper line, level and slope for effective drainage, using approximately 80 percentage new and 20 percentage sound reusable old laterite stones of size 30 x 20 x 20 cm, laid in cement mortar 1 3, including filling and pointing of joints with cement mortar and neat finishing with colour matching to the existing surface, cleaning and finishing the completed surface, and all necessary materials, labour, tools, tackles, transportation, disposal charges and incidental works, complete as directed by the Engineer in Charge.

Providing a new laterite stone of size 30 x 20 x 20 cm pathway connecting to the tombstone, including excavation and preparation of ground, levelling and dressing, providing suitable base or bedding, supplying and laying laterite stone blocks of approved size and thickness to proper line, level and slope, including joint filling, dressing, cleaning, transportation, labour, tools, tackles and all incidental works, complete as directed by the Engineer in Charge

Recess pointing to the apron or Pathway using lime mortar in the proportion of 1 1 1, including neat finishing, matching with the existing surface, curing and all incidental works, complete.

Providing, fabricating, supplying and fixing Visitor Information or Interpretation Board of approved design and dimensions, comprising suitable SS 304 grade stainless steel supporting frame and posts, duly welded, ground smooth and finished with satin or hairline finish, securely fixed to the ground with suitable stainless steel base plates, anchor fasteners and PCC foundation, including excavation, backfilling and disposal of surplus earth. The information panel shall consist of 4 mm thick Aluminium Composite Panel of approved colour and finish, securely fixed to the frame using stainless steel screws and provided with high quality UV resistant outdoor grade digitally printed graphics, text, photographs, monument history, significance, visitor information and other approved content. The printed surface shall be suitably protected with UV resistant outdoor grade protective lamination or finish, complete with all necessary fittings, fixtures, printing, lettering, graphics, welding, polishing, transportation, erection, alignment, labour, tools, tackles and all incidental works, complete in all respects as directed by the Engineer-in Charge. As per drawing