Tender Package No. MMGSY WB-19-KATIHAR-01(Mohna Chanpur Bandh to Azampur Shankar Bandh,Ghuski Chowk to Husaina,Man Bharti Tola to Mahadalit Tola Kusiyari,Narhiya Nahar to Ramnagar)in Katihar District

Amount

ROAD NAME- Mohna Chanpur Bandh to Azampur Shankar Bandh Setting Out Pillars Providing & Fixing of Bench Mark Pillars @ four nos per km as per drawings given and direction of E/I

Clearing and Grubbing Road Land ( By manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I

Removing all types of Hume pipe and stacking within a lead of 1000m including earthwork and dismantling of masonary works as per technical specification clause 202.1 .

Earthwork in Box cuttting Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

Construction of embankment with material obtained from road way cutting. Construction of embankment with approved material deposited from road way cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification clause 301.5

Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 100 m as per Technical Specification Clause 301.5 .

Construction of Embankment with Material Obtained from Borrow Pits. Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 .

Constrution of subgrade and Earthen shoulders Construction of subgrade and earthen shoulders with approved material with by volume of Local sand added to the soil obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Granular Sub-base with Well Graded Material (Table 400.1) Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Prime Coat (Medium porosity) Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502.

Tack Coat Providing and applying tack coat with bitumen emulsion (RS ) using emulsion distributor @ 0.2 to 0.25 kg per sq m on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503.

Mix Seal Surfaceing Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509

Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical

ii) Km stone

iii) 200 m stone

900 mm equilateral & triangle , OR

600 mm equilateral & triangle, OR

600 mm circular , OR

600 mm x 600 mm rectangular, OR

(I)Providing and Fixing 'Logo' of MMGSY Project Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

( III ) Providing & Fixing of LOGO of "Citizen Information Board" Providing and fixing of typical Citizen's Information board with Logo as per MORD specifications and drawing. Two nos. MS Plates of 1.6 mm thick, duly welded with 5mm thick steel plate on back on edges. The four nos. steel plates will be welded horrizontally with two nos. 75 mm x 75 mm of 12 SWG sheet tube post duly embedded in cement concrete M-15 grade blocks of 600 x 600 x 750 mm , 750 mm below ground level . The two nos steel plates will be welded vertically to two nos 75 mm x 75 mm of 12 SWG sheet tube post duly welded to vertical tubes . All M.S. will be stoved enamelled on both sides . Lattering and printing arrows , border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour . All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per dwg. clause 1701 & annexure 1700-1.

Boundary Pillar Reinforced cement concrete M-15 grade bounday pilars of standards design as per IRC -25-1967 fixed in position inclding finisihing and lettering but excluding painting

Painting Two coats on New Concrete Surface Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface

Road Marking With Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminious Surface Providing and Laying of Hot Applied Thermoplastic Compound 2.5 mm thick reflectorising glass beads @250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 The Finished Surface to be level , Uniform and free from streakes and holes

Road Marking With Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Concrete Surface Providing and Laying of Hot Applied Thermoplastic Compound 2.5 mm thick reflectorising glass beads @250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 The Finished Surface to be level , Uniform and free from streakes and holes

Providing concrete for plain/reinforced concrete (M-15) in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Construction of granular sub-base by providing well graded material (Grading I) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401

Earth work in excavation for foundation of structure upto 3.0 m depth as per drawing and technical specification clause 1104

Providing M15 (P.C.C 1:2.5:5) as leveling course in foundation Providing M15 (P.C.C 1:2.5:5) concrete for plain concrete in open foundations complete as per drawing and technical specifications clause 802,803,1202 & 1203

Plain /reinforced cement concrete in substructure complete as per drawing and technical specifications Clauses ,802,804,805,806,807, 1202 and 1204 (M-20)

Providing and laying RCC pipe NP 3 for culverts on first class bedding of P.C.C M 10 material in single row including fixing collar with cement mortar 1:2 but excluding excavation , protection works , backfilling concrete and masonary works in head walls and parapets as per clause 1106

Painting on Parapet wall ( Black & White Strips )Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new plastered/ concrete surfaces as per drawing and technical specification clause 1701

Back filling behind abutment , wing wall and return wall complete as per drawing and technical specification Clause 1204,3.8 (With sandy Materials)

Agricultural Conduit 300 mm Dia

LABOUR CESS @ 1 %

SEIGNIORAGE FEE

1st Year Maintenance cost

2nd Year Maintenance cost

3rd Year Maintenance cost

4th Year Maintenance cost

5th Year Maintenance cost

LABOUR CESS @ 1 %

SEIGNIORAGE FEE

ROAD NAME- Ghuski Chowk to Husaina Setting Out Pillars Providing & Fixing of Bench Mark Pillars @ four nos per km as per drawings given and direction of E/I

Clearing and Grubbing Road Land ( By manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I

Removing all types of Hume pipe and stacking within a lead of 1000m including earthwork and dismantling of masonary works as per technical specification clause 202.1 .

Earthwork in Box cuttting Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

Construction of embankment with material obtained from road way cutting. Construction of embankment with approved material deposited from road way cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification clause 301.5

Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 100 m as per Technical Specification Clause 301.5 .

Construction of Embankment with Material Obtained from Borrow Pits. Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 .

Constrution of subgrade and Earthen shoulders Construction of subgrade and earthen shoulders with approved material with by volume of Local sand added to the soil obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Granular Sub-base with Well Graded Material (Table 400.1) ( By mix in place method ) Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Prime Coat (Medium porosity) Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502.

Tack Coat Providing and applying tack coat with bitumen emulsion (RS ) using emulsion distributor @ 0.2 to 0.25 kg per sq m on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503.

Mix Seal Surfaceing Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509

Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical

ii) Km stone

iii) 200 m stone

900 mm equilateral & triangle , OR

600 mm equilateral & triangle, OR

600 mm circular , OR

600 mm x 600 mm rectangular, OR

(I)Providing and Fixing 'Logo' of MMGSY Project Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

( III ) Providing & Fixing of LOGO of "Citizen Information Board" Providing and fixing of typical Citizen's Information board with Logo as per MORD specifications and drawing. Two nos. MS Plates of 1.6 mm thick, duly welded with 5mm thick steel plate on back on edges. The four nos. steel plates will be welded horrizontally with two nos. 75 mm x 75 mm of 12 SWG sheet tube post duly embedded in cement concrete M-15 grade blocks of 600 x 600 x 750 mm , 750 mm below ground level . The two nos steel plates will be welded vertically to two nos 75 mm x 75 mm of 12 SWG sheet tube post duly welded to vertical tubes . All M.S. will be stoved enamelled on both sides . Lattering and printing arrows , border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour . All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per dwg. clause 1701 & annexure 1700-1.

Boundary Pillar Reinforced cement concrete M-15 grade bounday pilars of standards design as per IRC -25-1967 fixed in position inclding finisihing and lettering but excluding painting

Painting Two coats on New Concrete Surface Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface

Road Marking With Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminious SurfaceProviding and Laying of Hot Applied Thermoplastic Compound 2.5 mm thick reflectorising glass beads @250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 The Finished Surface to be level , Uniform and free from streakes and holes

Road Marking With Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Concrete Surface Providing and Laying of Hot Applied Thermoplastic Compound 2.5 mm thick reflectorising glass beads @250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 The Finished Surface to be level , Uniform and free from streakes and holes

Providing concrete for plain/reinforced concrete (M-15) in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Construction of granular sub-base by providing well graded material (Grading I) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401

Earth work in excavation for foundation of structure upto 3.0 m depth as per drawing and technical specification clause 1104

Providing M15 (P.C.C 1:2.5:5) as leveling course in foundation Providing M15 (P.C.C 1:2.5:5) concrete for plain concrete in open foundations complete as per drawing and technical specifications clause 802,803,1202 & 1203

Plain /reinforced cement concrete in substructure complete as per drawing and technical specifications Clauses ,802,804,805,806,807, 1202 and 1204 (M-20)

Providing and laying RCC pipe NP 3 for culverts on first class bedding of P.C.C M 10 material in single row including fixing collar with cement mortar 1:2 but excluding excavation , protection works , backfilling concrete and masonary works in head walls and parapets as per clause 1106

Painting on Parapet wall ( Black & White Strips )Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new plastered/ concrete surfaces as per drawing and technical specification clause 1701

Back filling behind abutment , wing wall and return wall complete as per drawing and technical specification Clause 1204,3.8 (With sandy Materials)

Agricultural Conduit 300 mm dia

LABOUR CESS @ 1 %

SEIGNIORAGE FEE

1st Year Maintenance cost

2nd Year Maintenance cost

3rd Year Maintenance cost

4th Year Maintenance cost

5th Year Maintenance cost

LABOUR CESS @ 1 %

SEIGNIORAGE FEE

ROAD NAME- Man Bharti Tola to Mahadlit Tola Kusiyari Setting Out Pillars Providing & Fixing of Bench Mark Pillars @ four nos per km as per drawings given and direction of E/I

Clearing and Grubbing Road Land ( By manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I

Earthwork in Box cuttting Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

Construction of embankment with material obtained from road way cutting. Construction of embankment with approved material deposited from road way cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification clause 301.5

Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 100 m as per Technical Specification Clause 301.5 .

Construction of Embankment with Material Obtained from Borrow Pits. Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 .

Constrution of subgrade and Earthen shoulders Construction of subgrade and earthen shoulders with approved material with by volume of Local sand added to the soil obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Granular Sub-base with Well Graded Material (Table 400.1) Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Prime Coat (Medium porosity) Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502.

Tack Coat Providing and applying tack coat with bitumen emulsion (RS ) using emulsion distributor @ 0.2 to 0.25 kg per sq m on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503.

Mix Seal Surfaceing Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509

Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical

ii) Km stone

iii) 200 m stone

600 mm equilateral & triangle, OR

600 mm circular , OR

600 mm x 600 mm rectangular, OR

(I)Providing and Fixing 'Logo' of MMGSY Project Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

( III ) Providing & Fixing of LOGO of "Citizen Information Board" Providing and fixing of typical Citizen's Information board with Logo as per MORD specifications and drawing. Two nos. MS Plates of 1.6 mm thick, duly welded with 5mm thick steel plate on back on edges. The four nos. steel plates will be welded horrizontally with two nos. 75 mm x 75 mm of 12 SWG sheet tube post duly embedded in cement concrete M-15 grade blocks of 600 x 600 x 750 mm , 750 mm below ground level . The two nos steel plates will be welded vertically to two nos 75 mm x 75 mm of 12 SWG sheet tube post duly welded to vertical tubes . All M.S. will be stoved enamelled on both sides . Lattering and printing arrows , border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour . All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per dwg. clause 1701 & annexure 1700-1.

Boundary Pillar Reinforced cement concrete M-15 grade bounday pilars of standards design as per IRC -25-1967 fixed in position inclding finisihing and lettering but excluding painting

Painting Two coats on New Concrete Surface Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface

Road Marking With Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminious Surface Providing and Laying of Hot Applied Thermoplastic Compound 2.5 mm thick reflectorising glass beads @250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 The Finished Surface to be level , Uniform and free from streakes and holes

Road Marking With Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Concrete Surface Providing and Laying of Hot Applied Thermoplastic Compound 2.5 mm thick reflectorising glass beads @250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 The Finished Surface to be level , Uniform and free from streakes and holes

Providing concrete for plain/reinforced concrete (M-15) in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Construction of granular sub-base by providing well graded material (Grading I) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401

Earth work in excavation for foundation of structure upto 3.0 m depth as per drawing and technical specification clause 1104

Providing M15 (P.C.C 1:2.5:5) as leveling course in foundation Providing M15 (P.C.C 1:2.5:5) concrete for plain concrete in open foundations complete as per drawing and technical specifications clause 802,803,1202 & 1203

Plain /reinforced cement concrete in substructure complete as per drawing and technical specifications Clauses ,802,804,805,806,807, 1202 and 1204 (M-20)

Providing and laying RCC pipe NP 3 for culverts on first class bedding of P.C.C M 10 material in single row including fixing collar with cement mortar 1:2 but excluding excavation , protection works , backfilling concrete and masonary works in head walls and parapets as per clause 1106

Painting on Parapet wall ( Black & White Strips )Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new plastered/ concrete surfaces as per drawing and technical specification clause 1701

Back filling behind abutment , wing wall and return wall complete as per drawing and technical specification Clause 1204,3.8 (With sandy Materials)

Agricultural Conduit 300 mm Dia

LABOUR CESS @ 1 %

SEIGNIORAGE FEE

1st Year Maintenance cost

2nd Year Maintenance cost

3rd Year Maintenance cost

4th Year Maintenance cost

5th Year Maintenance cost

LABOUR CESS @ 1 %

SEIGNIORAGE FEE

ROAD NAME- Narhiya Nahar to Ramnagar Setting Out Pillars Providing & Fixing of Bench Mark Pillars @ four nos per km as per drawings given and direction of E/I

Clearing and Grubbing Road Land ( By manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I

Removing all types of Hume pipe and stacking within a lead of 1000m including earthwork and dismantling of masonary works as per technical specification clause 202.1 .

Earthwork in Box cuttting Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

Construction of embankment with material obtained from road way cutting. Construction of embankment with approved material deposited from road way cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification clause 301.5

Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 100 m as per Technical Specification Clause 301.5 .

Construction of Embankment with Material Obtained from Borrow Pits. Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 .

Constrution of subgrade and Earthen shoulders Construction of subgrade and earthen shoulders with approved material with by volume of Local sand added to the soil obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Granular Sub-base with Well Graded Material (Table 400.1) Construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Prime Coat (Medium porosity) Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502.

Tack Coat Providing and applying tack coat with bitumen emulsion (RS ) using emulsion distributor @ 0.2 to 0.25 kg per sq m on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503.

Mix Seal Surfaceing Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509

Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical

ii) Km stone

iii) 200 m stone

600 mm equilateral & triangle, OR

600 mm circular , OR

600 mm x 600 mm rectangular, OR

(I)Providing and Fixing 'Logo' of MMGSY Project Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

( III ) Providing & Fixing of LOGO of "Citizen Information Board" Providing and fixing of typical Citizen's Information board with Logo as per MORD specifications and drawing. Two nos. MS Plates of 1.6 mm thick, duly welded with 5mm thick steel plate on back on edges. The four nos. steel plates will be welded horrizontally with two nos. 75 mm x 75 mm of 12 SWG sheet tube post duly embedded in cement concrete M-15 grade blocks of 600 x 600 x 750 mm , 750 mm below ground level . The two nos steel plates will be welded vertically to two nos 75 mm x 75 mm of 12 SWG sheet tube post duly welded to vertical tubes . All M.S. will be stoved enamelled on both sides . Lattering and printing arrows , border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour . All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per dwg. clause 1701 & annexure 1700-1.

Boundary Pillar Reinforced cement concrete M-15 grade bounday pilars of standards design as per IRC -25-1967 fixed in position inclding finisihing and lettering but excluding painting

Painting Two coats on New Concrete Surface Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface

Road Marking With Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminious Surface Providing and Laying of Hot Applied Thermoplastic Compound 2.5 mm thick reflectorising glass beads @250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 The Finished Surface to be level , Uniform and free from streakes and holes

Road Marking With Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Concrete Surface Providing and Laying of Hot Applied Thermoplastic Compound 2.5 mm thick reflectorising glass beads @250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 The Finished Surface to be level , Uniform and free from streakes and holes

Providing concrete for plain/reinforced concrete (M-15) in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203

Construction of granular sub-base by providing well graded material (Grading I) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5

Earth work in excavation for foundation of structure upto 3.0 m depth as per drawing and technical specification clause 1104

Providing M15 (P.C.C 1:2.5:5) as leveling course in foundation Providing M15 (P.C.C 1:2.5:5) concrete for plain concrete in open foundations complete as per drawing and technical specifications clause 802,803,1202 & 1203

Plain /reinforced cement concrete in substructure complete as per drawing and technical specifications Clauses ,802,804,805,806,807, 1202 and 1204 (M-20)

Providing and laying RCC pipe NP 3 for culverts on first class bedding of P.C.C M 10 material in single row including fixing collar with cement mortar 1:2 but excluding excavation , protection works , backfilling concrete and masonary works in head walls and parapets as per clause 1106

Painting on Parapet wall ( Black & White Strips )Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new plastered/ concrete surfaces as per drawing and technical specification clause 1701

Back filling behind abutment , wing wall and return wall complete as per drawing and technical specification Clause 1204,3.8 (With sandy Materials)

Agricultural Conduit 300 mm Dia

Earth work in excavation for foundation of structure upto 3.0 m depth as per drawing and technical specification clause 1104

Providing M15 (P.C.C 1:2.5:5) as leveling course in foundation Providing M15 (P.C.C 1:2.5:5) concrete for plain concrete in open foundations complete as per drawing and technical specifications clause 802,803,1202 & 1203

Plain /reinforced cement concrete in substructure complete as per drawing and technical specifications Clauses ,802,804,805,806,807, 1202 and 1204 (M-20)

Providing and laying RCC pipe NP 3 for culverts on first class bedding of P.C.C M 10 material in single row including fixing collar with cement mortar 1:2 but excluding excavation , protection works , backfilling concrete and masonary works in head walls and parapets as per clause 1106

Painting on Parapet wall ( Black & White Strips )Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new plastered/ concrete surfaces as per drawing and technical specification clause 1701

Back filling behind abutment , wing wall and return wall complete as per drawing and technical specification Clause 1204,3.8 (With sandy Materials)

LABOUR CESS @ 1 %

SEIGNIORAGE FEE

1st Year Maintenance cost

2nd Year Maintenance cost

3rd Year Maintenance cost

4th Year Maintenance cost

5th Year Maintenance cost

LABOUR CESS @ 1 %

SEIGNIORAGE FEE