SUPPLY OF SET OF H.T. SIDE (11KV) VERTICAL BOOT FOR TRANSFORMER TO GONDAL DO(E-TENDER).

2. Estimated cost in Rs.

3 Tender Fee in Rs. (non-refundable) with 18 % GST (NEFT/RTGS)

4 Payment of tender fees and EMD fees (OnLine) at Following

Particulars Requisite Details 03-10-2026

 Name of Bank :- STATE BANK OF INDIA 18:00 HRS

 Name of Branch :- KADIYA LINE, M.G ROAD- GONDAL

 Branch Code:-

 IFSC Code :- SBIN0060073 TO

 Name of Account PASCHIM GUJARAT VIJ COMPANY LIMITED

& Online tender will be issued from N-Procure Website, during 18:00 HRS

the time limit mention here.

5 Earnest Money Deposit amount in Rs. 3000.00 (NEFT/RTGS) 3000.00/-

(1 % of Tender Amount) (NEFT/RTGS)

6 On line ( e-tendering ) Tender offer submission last Date 12-10-2026

12-10-2026 up to 18:00 hours only 18:00 HRS

(This is mandatory )

7 Date & Time for pre bid meeting ( If Required) ---

8 Online Submission of all the relevant 12-10-2026

Documents, last Date 12-10-2026 up to18:00hours. 18:00 HRS

9 Date of opening of Online Tender/Off Line fee , Date 13-10-2026 13-10-2026

@ 10:30 hours (if possible) 10:30 HRS

10 Date of opening of On Line Technical Bid at 13-10-2026

13-10-2026 @ 10:30 hours (if possible) 10:30 HRS

11 Date of online opening of On Line Price bid, Date: 13-10-2026 13-10-2026

@ 10:45 hours (if possible) 10:45 HRS

12 Validity of Bid 90 Days

Executive Engineer PGVCL

Gondal Division

Sign & Stamp of Bidder

PASCHIM GUJARAT VIJ COMPANY LIMITED

TECHNICAL SECTION

REGISTERED & CORPORATE OFFICE - RAJKOT

NO. PGVCL/Tech/ DATE:

TECHNICAL SPECIFICATION FOR VERTICAL CABLE BOOTS FOR TRANSFORMER HT

BUSHING WITH WATER DRAINING ARRANGEMENT

This specification covers the technical requirements of design, manufacturing & testing at

manufacturer's works, packing, forwarding, supply and unloading at store of Terminal protector

or cable boot for 11 KV Transformer required for safe and satisfactory operation of various

makes of Transformers.

2.0 DESIGN FEATURES-

• Accommodates a large cable cross section, 70-300 sq.mm

• Prevents Flashover Due to Humid Environment in HT Cable Entry Box • Protection from

Flashover to Intervention by Reptiles, Birds, Animals

• It is easy to fit during installation and maintenance.

• It is re-open able and re-usable

The vertical cable boots should be manufactured from electrically insulating, anti-tracking, UV

resistant, flame retardant, temperature resistant and weather resistant rubber material.

The cable boot should have an inspection hole which should be covered with removable cap.

The cable boot should have following dimensions -

Length: >300 mm (vertical Boot),

Cable/conductor Entry top of boot: >015 mm,

Thickness: 4.5 ± 0.5 mm

Inside diameter of bottom of boot: 072 mm

Inside diameter of Grommet: 035 mm

Rain shade cable/conductor entry hole: 010 mm

The vertical cable boot should be fitted on the transformer bushing using a grommet. Grommets

must have Slots for Water Passage and 3 legs attached to the grommet to ensure draining of

3.0 GUARANTAEED TECHNICAL PARTICULARS:

Guaranteed Technical particulars are given in enclosed Annexure A.

Bidder shall submit the data in given Performa at time of bid offer.

Following documents/certificates shall be furnished by the bidder along with offer.

i) Guaranteed technical particulars (GTP).

ii) Test Certificate.

iii) Quality Assurance Plan (QAP)

5.0 TYPE TEST CERTIFICATE:

Type testing to done for 11 KV Transformer and the vertical cable boot is suitable for transformer

The bidder shall submit following Type Test report from any NABL accredited Lab or Govt.

approved Lab. Test certificate Tested as per IEC: 60060 - 1 - 2010. Type Test Certificate

should not be older than 7 years as on the date of tender Opening.

1. Dry Power Frequency Voltage Withstand Test - 70 kV for 1 min

2. Impulse Withstand Test - 125 kVp

3. Leakage Current Test at 36 kV.(Required testing standard)

4. Exposure to UV Radiation - 500 Hours

5. Salt Fog Test - 500 Hours

6. Heat Ageing Test 7 Days at 70°C

7. Tracking test (Comparative Tracking Index) IEC 60112:2003 +A1 :2009

8. Water absorption test 0.5 max

9. DC Voltage Withstand 54 kv DC for 5 min.

5.1 ROUTINE TEST:

Manufacturer has to carryout routine test during production to check the essential

Requirements that is likely to vary during production. Manufacture has to keep

records Of the same and to be produced for verification of inspector when asked at

the time of Inspection of lot.

5.2 ACCEPTANCE TEST:

Visual examination and dimensional check to be carried out at manufacturer location of the

material on samples randomly selected from supply lot. Minimum 1 O nos. is to be selected from

supplied lot material for acceptance test. Material is acceptable after conform all samples in

dimensions given in this specification and also examine for freedom from flaws, cracks and

1. Dimensional Inspection Report

2. Hardness of the material of the lot (On Test Button) As per ASTM D2240

3. Tensile Testing on specimen of the material of the lot (As per ASTM D412)

4. Elongation Testing specimen of the material of the lot (As per ASTM D412)

5. Dielectric Strength Test on specimen of the material of the lot (As per ASTM D149)

6. Volume Resistivity (As per ASTM D257)

7. Flame Retardant Test for one minute - No burning (self - extinguish) EN

6.0 General and Tender Sample:

The tenders received without complete details required as per specifications and GTP enclosed

is liable to be rejected without Prior Information.

The Sample of two nos. of sets as per specifications will have to be submitted before the Date

of Physically bid submission at RSO Rajkot- PGVCL.

The bidder should submit Performance certificate not bellow the rank of Executive from any

DISCOM under GUVNL and its Subsidiary Company. In support of fulfilment of the past supply

criteria, the bidder shall furnish documentary evidence along with bid i.e. Work Order Copies

duly attested by the Authority.

The bidder shall have facility to perform testing as per Acceptance Test. The bidder shall furnish

the details of manufacturing and testing facilities available with him. Bidder must have testing

facility to carry out routine tests at their works

The product should contains -

1. Manufacturer's Logo

3. PROPERTYOF PGVCL

4. Manufacturing month &

9.0 GUARANTEE OF BOOTS

The boots shall be guaranteed for satisfactory and trouble free operation for a period of

months from the date of installation at site against defects in the materials or design.

In case of any manufacturing defect observed during guaranteed period due to faulty design and

defective materials and on such information to the supplier of boots shall have to be replaced

free of cost by the supplier.

GUARA NTEED TECHNICAL PARTICULARS

GTP for Vertical Cable Boot

Descriptions Unit As per Firm's Offer

1 Name of Manufacturer ---- As per Tech Data

2 Nominal system voltage kV

3 Maximum system voltage kV

14 Name and type/grade o1

5 Average. I Minimum wall

8 Operating temperature Deg.C -1 Oto+

9 Low Temp. Flexibility - No Cracking

10 Applicable standards Tested as per IEC: 60060 - 1 -

11 Dielectric strength ASTM D149 kV/mm 12 kV/mm (min)

12 AC High voltage power IEC: 60060 -

kV 70 kV for 1 min

13 Impulse with stand 1.2 / 50 IEC: 60060 -

14 Volume Resistivity Ohm cm

ASTM D257 1 x 10"14 (Min)

15 Tensile strength 10 N/mm2 (Min)

16 Ultimate Elongation 200% (Min)

17 Temperature in °C

(Max/Min/Year Average)

18 UV Protection yes

19 Colour Reddish brown i

20 Flame retardant No burning

1. Straight Cable Boot - 3 Nos.

((Having Grommet with water

holes on border side and

additional minor 2 holes

required to proper drainage of

15 Each Boot Set shall contain water, Rain shade - 3 Nos.,

- 3 Nos., Silicone Grease -

Bottle (30 ml aprx.)

2. ERP Tape- 3M make,

mm width, 2 meter long

3. Installation Instruction Manual

Packed in corrugated box.

Ref Standard: Tensile Strength - ASTM D412, Dielectric Strength: ASTM D149, Volume

Resistivity - ASTM D257