(i)Provision for construction of new building at Canning running room and ladies room in existing running room of Namkhana & Canning including all ancillary works for Lakshmikantapur, Diamond Harbour, Namkhana and Canning existing running room in the jurisdiction of Assistant Engineer/Baruipur/Sealdah. (ii) Provision of ramp facilities, toilets, SS hand rails, water booth, low height booking counter, tactile guiding and warning blocks leading to the edge of staircases etc for Divyangan person under Sr.Divisional Engineer/II/Sealdah. (iii) Ladies Changing Rooms for RPF Officers/staff under Sr.Divisional Engineer/II/Sealdah.

B-Non Schedule Items

Item Breakup - A-DSR Items

of 88 mm, weighing not less than 190 gms. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.-Internal work - Exposed on wall 126 18.7.1 15 mm nominal dia Pipes Metre 48 255.9 12283.2 127 18.7.2 20 mm nominal dia Pipes Metre 48 325.1 15604.8 128 18.7.3 25 mm nominal dia Pipes Metre 74 408.55 30232.7 129 18.7.4 32 mm nominal dia Pipes Metre 50 500.95 25047.5 130 18.7.5 40 mm nominal dia Pipes Metre 50 674.35 33717.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. 131 18.8.1 15 mm nominal dia Pipes Metre 100 441.15 44115 132 18.8.2 20 mm nominal dia Pipes Metre 50 513.75 25687.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This 18.9 includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.-External work 133 18.9.5 40 mm nominal dia Pipes Metre 24 559.2 13420.8 134 18.9.6 50 mm nominal dia Pipes Metre 8 811.85 6494.8 Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc.-External work 135 18.12.1 15 mm dia nominal bore Metre 140 267.5 37450 136 18.12.2 20 mm dia nominal bore Metre 210 315.35 66223.5 137 18.12.3 25 mm dia nominal bore Metre 280 417.95 117026 138 18.12.5 40 mm dia nominal bore Metre 420 558.35 234507 18.15S BRASS FITTINGS Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 139 18.17.1 25 mm nominal bore Each 4 532.35 2129.4 140 18.17.3 40 mm nominal bore Each 4 707.3 2829.2 141 18.17.4 50 mm nominal bore Each 4 878.25 3513 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES SEALDAH DIVISION-ENGINEERING/EASTERN RLY Providing and filling sand of grading zone V 18.41 or coarser grade, allround the G.I. pipes in external work : 142 18.41.10 150 mm diameter pipe Metre 150 453.95 68092.5 Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except 18.42 ordinary hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested : 143 18.42.3 Beyond 12 m and up to 18 m depth Metre 150 847.35 127102.5 18.43 Providing and placing in position filters of 40 Metre 10 813.25 8132.5 144 mm diameter G.I. pipe with brass strainer of approved quality. 18.44 Providing and fixing to filter and lowering to Metre 20 499.8 9996 145 proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. 18.48 Providing and placing on terrace (at all floor Litre 8000 9.7 77600 levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable 146 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS 18.51 standards and weighing not less than 690 gms. 147 18.51.1 15 mm nominal bore Each 25 708.4 17710 Providing and fixing C.P. brass stop cock 18.52 (concealed) of standard design and of approved make conforming to IS:8931. 148 18.52.1 15 mm nominal bore Each 25 594.75 14868.75 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.1 15mm nominal bore, 86 mm long, weighing Each 16 109.85 1757.6 149 not less than 88 gms 18.54.4 15 mm nominal bore, 90 mm long, weighing Each 10 170.05 1700.5 150 not less than 93 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, weighing Each 26 103.15 2681.9 151 not less than 88 gms Providing and fixing PTMT pillar cock of 18.56 approved quality and colour. 18.56.1 15 mm nominal bore, 107 mm long, weighing Each 10 180.8 1808 152 not less than 110 gms Providing and fixing PTMT, push cock of 18.57 approved quality and colour. 18.57.1 15 mm nominal bore, 98 mm long, weighing Each 210 96.45 20254.5 153 not less than 75 gms 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT Ball cock of approved quality, colour and make complete 18.62 with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.2 20 mm nominal bore, 120 mm long, weighing Each 2 223.5 447 154 not less than 198 gms 18.62.3 25 mm nominal bore, 152mm long, weighing Each 8 459.4 3675.2 155 not less than 440 gms 18.64 Providing and fixing PTMT swivelling shower, Each 18 106.15 1910.7

40 gms SEALDAH DIVISION-ENGINEERING/EASTERN RLY 18.65 Providing and fixing PTMT soap Dish Holder Each 8 96.75 774 having length of 138mm, breadth 102mm, 157 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 21.0 ALUMINIUM WORK Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 478 433.95 207428.1 158 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 442 531.8 235055.6 159 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 64 1019.8 65267.2 160 (weight not less than 10kg/sqm) 22.0 WATER PROOFING Grading roof for water proofing treatment 22.14 with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 10 7510.75 75107.5 161 sand : 4 graded stone aggregate 20mm nominal size) Total 27649333.50

Item Breakup - B-Non Schedule Items

Preparation of GAD, steel structural details, Job reinforcement details of foundation, superstructure, architectural drawing and detailing showing details section, size, details of reinforcement etc. All drawing are to be prepared as per Railway standard size and all drawing should contain key plan in suitable scale at right hand side comer of the drawing. The design and drawing should be submitted to the Railway for approval. Any modification or alternation shall have to be done by the contractor as per Railway advice, after which final design shall be taken and drawing shall be submitted in ten nos. ammonia print and original tracing on poly film paper or RTF in two copies in each sheet of final drawing. Three sets of design calculation [final] should be submitted to the Railway after final approval of the drawing. [The detail design, drawing of pile foundation, raft, column, steel structure etc of each structure should he proof checked from..... Total 566204.62