Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.1 LAccepted-AOC | ₹7.1 L | 1 | Accepted-AOC 1st lowest and responsive |
| 2 | 2₹7.9 L+₹76,267.42 (10.7%)Rejected-AOC VILL CHANDRAICHARRA PO PS AMBASSA DHALAI TRIPURA | AMBASSA | DHALAI | TRIPURA | 799289 | ₹7.9 L+₹76,267.42 (10.7%) | 2 | Rejected-AOC 2nd lowest |
| 3 | Rejected-Technical | - | - | Rejected-Technical informal |
Tender Value
₹9.9 L
EMD Value
₹19,835
Closing Date
6 Jul 2026, 3:00 pmClosed
The Executive Engineer,Amb-Division,PWD(RandB)
o/o the Executive Engineer,Amb-Division,PWD(RandB)
Mtc. of Residential buildings at Ambassa PWD Quarter Complex/ SH- Mtc. of PWD Staff quarters (Type - I, II, III, IV), at Ambassa under Ambassa Division, PWD (RandB).
2026_CEPWD_74202_1
06/EE/PWD(RnB)/AMB/2026-27
Open Tender
Civil Works - Building
Percentage
180 days
Ambassa
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
₹19,835
o/o the Executive Engineer,Amb-Division,PWD(RandB)
18 Aug 2026
30 Jun 2026
6 Jul 2026
30 Jun 2026
6 Jul 2026
30 Jun 2026
30 Jun 2026 - 2 Jul 2026
3 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge. | - | Sqm. | 92.8 | - |
| 2 | Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per direction of Engineer-in-charge. 0.40 MM Thickness | - | sqm | 769.6 | - |
| 3 | Removing White or Colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | 0.4 | sqm | 13.3 | ₹5.31 |
| 4 | Distempering with dry distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. | 1 | sqm | 44.5 | ₹44.46 |
| 5 | Finishing walls with premium acrylic smooth exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. | 1 | sqm | 78 | ₹77.92 |
| 6 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in-charge. | 1 | Sqm. | 30.1 | ₹30.07 |
| 7 | 12 mm cement plaster of mix
In cement mortar 1 : 4 (1 cement : 4 fine sand) | 1 | Sqm. | 224.2 | ₹223.98 |
| 8 | Neat cement punning. | 1 | Sqm | 56.8 | ₹56.74 |
| 9Dismantling G.I. pipes (External work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction f Enginee-in-charge: | |||||
| 9.1 | 15 mm to 40 mm nominal bore | - | metre | 75.6 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_75521.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 4.39 MB
DNIT.pdf
Tender Documents • 2.79 MB
BOQ_75521.xls
BOQ • 0.37 MB
Integrity.pdf
Additional Documents • 0.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .