Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹4.2 L+₹1.2 L (41.7%)Rejected-Finance | L2 | Rejected-Finance Second Lowest | |
| 3 | Rejected-Technical | - | Rejected-Technical Due to non enlistment of requisite category |
Tender Value
Refer Docs
EMD Value
₹6,000
Closing Date
6 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sameer Wadekar
Holta Cantt, Palampur
REPAIR AND MAINTENANCE OF COOLING APPLIANCES REFRIGERATORS AND MISC WORK AT ALHILAL MIL STN
2022_MES_568272_1
GEP-39/2022-23
Open Tender
Civil Works
Item Rate
180 days
Alhilal
As per tender documents
8 documents required · 8 mandatory
₹300
Yes
GE Palampur
₹6,000
Yes
4 Mar 2023
9 Dec 2022
9 Jan 2023
9 Dec 2022
6 Jan 2023
23 Dec 2022
Amount
M&L replacement of unserviceable hermatic sealed compressor of Refrigerator 285 Ltr, Capacity with fresh new uncut sealed compressor with suitable relay and over load as per the company scheme supplied by the manufacture including flushing out system, checking and rectification of leakage, gas charging and testing after completion of work at MES store yard, complete all as specified and directed. Note:- (i) The rate quoted by the contractor shall be inclusive of all charges like transportation, fitting etc complete with necessary guarantee period for replacement as per company terms and conditions. (ii) The new unit will be purchased from authorized dealers only.
M&L replacement of unserviceable hermatic sealed compressor of Refrigerator 165/170/180 Ltr, Capacity with fresh new uncut sealed compressor with suitable relay and over load as per the company scheme supplied by the manufacture including flushing out system, checking and rectification of leakage, gas charging and testing after completion of work at MES store yard, complete all as specified and directed. Note:- (1) The rate quoted by the contractor shall be inclusive of all charges like transportation, fitting etc complete with necessary guarantee period for replacement as per company terms and conditions. (ii) The new unit will be purchased from authorized dealers only.
S&F starting relay suitable for up to 285 litres capacity refrigerator including taking down old un-serviceable starting relay complete all as specified and directed.
S&F thermostat automatic 'R' frost with knob suitable for 165/170/180/285 litres capacity refrigerator complete including taking down old un-serviceable thermostat all as specified and directed.
S&F condenser coil unit with necessary fixing arrangements and testing suitable for 285 litres capacity refrigerator complete including taking down old un-serviceable condenser coil unit all as specified and directed.
S&F condenser coil unit with necessary fixing arrangements and testing suitable for 165/170/180 litres capacity refrigerator complete including taking down old un-serviceable condenser coil unit all as specified and directed.
S&F 15 watt lamp with holder suitable for up to 285 litres capacity refrigerator complete including taking down old un-serviceable lamp with holder all as specified and directed.
S&F freezer assembly complete and testing of best quality suitable for up to 285 litres capacity refrigerator complete including taking down old un-serviceable freezer assembly as per manufacturer's instruction complete all as specified and directed.
S&F freezer door with spring/hinge complete suitable for up to 286 litres capacity refrigerator including taking down old un-serviceable freezer door complete as per manufacturer's instruction complete all as specified and directed.
S&Fdoor gasket of best quality suitable for up to 286 litres capacity refrigerator complete including taking down old un-serviceable door gasket as per manufacturer's instructions, complete all as specified and directed.
S&F door handle of best quality suitable for up to 286 litres capacity refrigerator complete including taking down old un-serviceable damaged door handle as per manufacturer's instructions, complete all as specified and directed.
S&F in replacement bottle self of best quality suitable for up to 286 litres capacity refrigerator complete as per manufacturer's instructions, complete all as specified and directed.
S&F in replacement vegatable tray of best quality suitable for up to 286 litres capacity refrigerator complete as per manufacturer's instructions, complete all as specified and directed.
S&F in replacement cabinate shelves of best quality suitable for up to 286 litres capacity refrigerator complete as per manufacturer's instructions, complete all as specified and directed.
S&F crisper glass of best quality suitable for up to 286 litres capacity refrigerator complete as per manufacturer's instructions, complete including taking down old un-serviceable broken glass all as specified and directed.
S&F door lock of best quality suitable for up to 286 litres capacity refrigerator complete including taking down old un-serviceable door lock as per manufacturer's instructions, complete all as specified and directed.
M&L taking out window type AC from site of any capacity and make for servicing including cleaning with air blower, cleaning and washing fins of cooling coil with caustic soda mixed water, taking out all dirt, sludge deposited, cleaning of air filter including oiling / greasing of condensing fan motor, and reinstalled the AC in position, connection and testing complete all directed. Note:- Any damage occurred during repair for which contractor will be responsible to rectify defects without any cost to the Govt.
S&F in replacement unservieable sealed unit compressor of window type Air conditioner 1.5 Ton new compressor of same make as existing for window type air conditioner 1.5 Ton capacity, soldering welding, brazing as required including charging of refrigerant gas and oil in the exchanged compressor making electrical and mechnical connections of air conditioner at site and testing on load complete all as specified and directed.
S&F starting relay for window type AC 1.50 ton capacity complete including taking down old un-serviceable starting relay complete all as specified and directed.
S&F gas regulating valve for window type AC 1.50 ton capacity complete including taking down old un-serviceable gas regulating valve complete all as specified and directed.
S&F overload protection relay for window type AC 1.50 ton capacity including taking down old un-serviceable over load protection relay complete all as specified and directed.
S&F thermostat switch suitable for window type AC 1.50 ton capacity including taking down old un-serviceable thermostat complete all as specified and directed.
S&F starting capacitor 80/100 MFD suitable for 1.5 ton capacity window type AC including taking down old un-serviceable starter complete all as specified and directed.
S&F running capacitor 36 MFD suitable for 1.5 ton capacity window type AC including taking down old un-serviceable capacitor complete all as specified and directed.
S&F front grill for window type AC 1.50 ton capacity including taking down old damaged grill complete all as specified and directed.
S&F Air filter for window type AC including taking down old un-serviceable air filter complete all as specified and directed.
Supply and charging of freon gas R-134/R-12 for refrigerator,deep freezer complete all as specified and directed.
Taking down ceiling fan ,any size and sweep from its position after disconnecting electrical connection and transport it to workshop for servicing,dismantling for servicing including removal of bearing,bushes, condenser, connector, flaxible cord,split pin etc if required removing old grease and refill fresh, lubricating bushes alongwith new washers, cleaning and washing fan blades, fan body etc with soap solution after repairing re- assamble the same and transporting from workshop to any location in Alhilal Mil Station and fixing to position / location as directed by Engineer-in- charge, connecting to electric system, testing etc complete all as specified and directed. Note: -(i) Replacement of parts/rewinding shell be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store & taking down unserviceable/ defective parts.(iii) Item such as bearings, bushes, capacitor, shaft etc required for replacemen shalled be measured and paid seperately as supply only.
Taking down and transporting of exhaust fan 9" (230mm)/12" (300mm) / 15" (375mm)/ 18" (450mm) sweep from any location inside Alhilal Mil Stn to MES E/M Store Yard / Workshop for stripping of fan washing thoroughly of bearing / bush by petrol, washing / cleaning fan blade body etc thoroughly provision of new greasing replacement of worn-out / defective unserviceable parts (wherever necessary) assembling the same after defective / unserviceable parts is replaced including provision of twisted twin core flexible wire upto 0.7 mts long size 23/0.0076 (ISI marked) and re-fixing the same at the same location/other location including making good disturbed surface including testing to entire satisfaction of Engineer-in-charge. Note: -(i) Replacement of parts/rewinding shell be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store & taking down unserviceable/ defective parts. (iii) Item such as bearings, bushes, capacitor, shaft etc required for replacemen shalled be measured and paid seperately as supply only.
Supply in replacement U climp complete with nut bolt washer, split pin and rubber weal etc complete all as specified and directed.
M&L cutting and taking out old burnout winding of any sweep ceiling fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete to entire satisfaction of Engineer- in- charge.
M&L cutting and taking out old burnout winding of 300 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete to entire satisfaction of engineer in charge.
M&L cutting and taking out old burnout winding of 380 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete to entire satisfaction of engineer in charge.
M&L cutting and taking out old burnout winding of 450 mm sweep exhaust fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete to entire satisfaction of engineer in charge.
Supply only condensor 2.5 MFD suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and directed.
S&F in replacement condensor 2.5 MFD suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and directed.
Supply only condensor 4 MFD suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and directed.
S&F in replacement condensor 4 MFD suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and directed.
Supply only ball bearing suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and directed.
S&F in replacement ball bearing suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and directed.
Supply only gun metal bush suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and directed.
S&F in replacement gun metal bush suitable for ceiling fan / exhaust fan / wall mountaining fan of any sweep complete all as specified and directed.
Supply and fix in repairs steped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed.
S&F in replacement flexible PVC insulated and PVC sheathed cable copper conductor twin core 23/0.0076 cross sectional area (superior quality) complete all as specified and directed.
Material and labour spray painting of ceiling fan, fan blades, down rod, canopy etc with a coat of synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the MES fan numbers etc with black paint complete all as directed.
AGGARWAL ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .