CONSTRUCTION OF NEW PAY & USE TOILET BLOCKS AT VARIOUS 07 (SEVEN) LOCATIONS OF SOUTH WEST (ATHWA) ZONE.

Name of work : Construction of new Pay & Use Toilet at Various 07(seven) Location in South West Zone (Athwa), Surat

SR. NO. SOR RATE-

DESCRIPTION QUANTITY UNIT AMOUNT

WORK UP TO PLINTH LEVEL

1 Excavation for foundation including sorting out and stacking

off useful materials and disposing of the excavated stuff up to

50 mt. lead and all lift, watering etc.comp. (A) loose or soft

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 mt. Depth 74.50 C.M. 123.13

SMC SOR-PAGE NO 1 IT NO

2 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ

piles) & disposal of the surplus excavated soil as directed

within a lead of 50 M. For following diameter of piles.

250mm dia 10.00 Rmt 334.80

SMC SOR , ITEM NO. 94, PG. NO.

3 Providing and filling rubbles including hand packing and

filling interstices with quarry spalls behind abutments and

between returns as directed.

SMC SOR , ITEM NO. 22, PG. NO. 3 17.50 C.M. 1094.11

4 Providing & laying C.C 1:3:6 (1cement : 3 coarse sand :

Crushed stone agg 20m.m Nominal size) &curing comp. excl.

cost of form work in :(a) foundation & Plinth

(A) Foundation 4.00 C.M. 3095.25

(C) Grade Slab 0.00 C.M. 3095.25

SMC SOR, PAGE NO 1 IT NO

5 Providing & laying cement concrete 1:2:4 (1 cement : 2 sand :

4 graded stone agg. 20 mm nominal size) & curing comp.

Includ. cost of form work but exclu. Cost of reinforcement for

reinforced concrete work in : (A) Foundation, footing, Base

of columns and Mass concrete.

(C) Grade slab 13.00 C.M. 3741.69

(SOR SMC Pg No. 9 It No. 95)

6 Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

(latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement

(A) foundation, footing, base of columns and mass concrete

(SOR SMC - MIX DESIGN PG. NO-14)

7 Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

(latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12930.68

(2) Having cross sectional area more than 0.085 sq. mt .up to

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M. 9288.03

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 9083.57

(2) Having cros sectional area more than 0.08 sq. mt and upto

(3) Having cross sectional area more than 0.12 sq. mt . 7.50 C.M. 7067.84

(SOR SMC - MIX DESIGN PG. NO-14)

8 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

crushed stone agg. 20 m.m Nominal size)& curing comp. incl.

cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 1.50 C.M. 4085.83

9 Providing & fixing IS Mark TMT Bar FE 500d reinforcement

for R.C.C. work incl. bending, binding & placing in position

Upto G.L./P.L. 3283.00 Kg. 77.29

(SOR SMC Pg No. 1 It No. 8)

10 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

(SOR SMC Pg No. 2 It No. 16) 9.00 C.M. 4729.83

11 Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding

cm. in depth consolidating each

disposited layer by ramming and watering.

(SOR SMC Pg No. 1 It No. 10) 115.00 C.M. 136.92

12 Filling in foundation and plinth with murrum or selected soil

in layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

(SOR SMC Pg No. 1 It No. 11) 39.00 C.M. 301.78

13 carrying out plinth treatment to post construction/existing

structure by spraying chemical solution for termite control

treatment including labour and material consisting with ISI

specification using chlordene and chiorpurfiles 20 EC as per

6131_part II concentration weight one litter give 1%

concentration inclusive of one litter chemicals emulsions

application at the rate of 5 litter chemicals /sqmt of surface is

recommended as per IS.

(SOR SMC Pg No. 12 It No. 127)

14 Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

mm. th. Finishing coat of C.M. 1:1 (1cement: 1 sand) apply

thick cement slurry and apply roller horizontal as well as

vertical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

(SOR SMC Pg No. 3 It No. 28) MR 18.00 S.M 324.00

15 Providing & applying two coats of weather shield max paint

(3 coats may be required in case of darker colours.)of ICI

Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers specification

and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers

Surface Preparation : surface is thoroughly clean, dry and

free from all loose dirt, chalk, grease, fungi,algae and flaking

paint. This can be achieved by brushing with a wire/ stiff coir

brush, followed by water jetting if required. Fill up all minor

cracks and defects with white cement and sand mixture in the

ratio 1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean

the surface thoroughly using wire brushes.

Priming: Apply a liberal coat of exterior acrylic primer and

allow it to dry for 4-5 hours.Application of putty is not

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 Page No. 16 18.00 S.M 82.00

WORK ABOVE PLINTH

16 Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

(latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12930.68

Terrace Floor 0.00 C.M. 12971.23

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt.

Ground Floor 5.00 C.M. 11253.32

Terrace Floor 1.00 C.M. 11293.87

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 C.M. 9288.03

Terrace Floor 0.00 C.M. 9328.58

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 9083.57

Terrace Floor 0.00 C.M. 9124.12

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 6.50 C.M. 8155.37

Terrace Floor 0.00 C.M. 8195.92

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 C.M. 7067.84

Terrace Floor 0.00 C.M. 7108.39

(SOR SMC - MIX DESIGN PG. NO-14)

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0 C.M. 7965.38

Terrace Floor 0.00 C.M. 8005.93

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0 C.M. 7377.92

Terrace Floor 0.00 C.M. 7418.47

(3) Having more than 13 cm. Thickness

Ground Floor 12.00 C.M. 6793.97

Terrace Floor 0.00 C.M. 6834.52

(SOR SMC - MIX DESIGN PG. NO-14)

Ground Floor 1.50 C.M. 9963.33

Terrace Floor 0.00 C.M. 10003.88

(SOR SMC Pg No. 2 It No. 13)

Ground Floor 2.50 C.M. 7119.46

Terrace Floor 0.00 C.M. 7160.01

(SOR SMC Pg No. 2 It No. 13)

17 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

crushed stone agg. 20 m.m Nominal size)& curing comp. incl.

cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 2.50 C.M. 4085.83

18 Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

(latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement

(A) Stair cases including landing etc.

Ground Floor 0.00 C.M. 7765.80

(SOR SMC - MIX DESIGN PG. NO-14)

(B) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9483.21

(SOR SMC - MIX DESIGN PG. NO-14)

19 Providing & fixing IS Mark TMT Bar FE 500 / FE 500d

reinforcement for R.C.C. work incl. bending, binding &

placing in position etc.comp.---

Ground Floor 3558.00 Kg 77.29

Terrace Floor 85.00 Kg 78.34

(SOR SMC Pg No. 2 It No. 15)

20 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 29.00 C.M. 4729.83

Terrace Floor 4.00 C.M. 5018.55

(SOR SMC Pg No. 2 It No. 16)

21 Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in

foundation and plinth (C)Fly Ash Bricks

Ground Floor 134.00 S.M. 712.81

Terrace Floor 0.00 S.M. 719.37

(SOR SMC Pg No. 2 It No. 17)

22 Providing & Applying 15mm.th.cement plaster in single coat

on brick/concrete walls similar surfaces for plastering &

finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and

similar surfaces -- Ground Floor

(A) for wall and similar surfaces

Ground Floor 456.00 S.M 249.39

Terrace Floor 27.00 S.M 249.39

(SOR SMC Pg No. 3 It No. 25)

23 Providing & Applying 10mm.th.cement plaster in single coat

on brick/ concrete walls similar surfaces for plastering &

finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and

similar surfaces -- Ground Floor

(B) for ceilings and soffits of stairs

Ground Floor 112.00 S.M 225.34

(SOR SMC Pg No. 3 It No. 24)

24 Providing and fixing 150 mm wide, approved quality chicken

wire mesh (FRP / PVC)at junction of brick work and RCC

work or two dissimilar surfaces, at all heights fixed by nails,

rowal plugs or tag by cement mortar 1:3 before applying the

plaster, including curing, scaffolding all complete as directed.

Ground floor 29.00 S.M. 102.00

First floor 2.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124)

25 Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

mm. th. Finishing coat of C.M. 1:1 (1cement: 1 sand) apply

thick cement slurry and apply roller horizontal as well as

vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

Ground Floor 140.00 S.M 324

Terrace Floor 18.00 S.M 324

(SOR SMC Pg No. 3 It No. 28)

26 Providing throating or plaster drip and moulding it to R.C.C.

chajja etc.comp.. For all floor

Ground Floor 39.00 R.M 43.74

(SOR SMC Pg No. 3 It No. 29)

27 Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.)

Ground Floor 39.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

28 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1 cement : 3 coarse sand)

finishing with flush pointing in white cement. (Basic Rate-

Ground Floor 0.00 S.M 1092.37

(SOR SMC Pg No. 4 It No. 44)

29 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

Ground Floor 342.00 S.M 1135.80

(SOR SMC Pg No.4 It No. 45)

30 Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria,Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with colour cement slurry including finished with

Ground pointing

Floor & cleaning the surface etc. comp.Size 24" x 87.00 S.M 1467.72

(SOR SMC Pg No.4 It No. 43)

31 Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement :

6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

Ground Floor 12.00 S.M 1019.39

(SOR SMC Pg No.3 It No. 32)

32 Providing and laying polished kota stone slab 25mm thick in

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed

with gray cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete.

Ground Floor 2.00 S.M 1130.79

(SOR SMC Pg No.4 It No. 33)

33 Providing and constructing sandwitch type Granite stone

platform 0.6 mt. wide & 0.75 mt. height, including one end

side granite stone (Double Polish) of 1.25 mt. height & front

granite stone patti of 10 cm wide, vertical partitions of half

B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

finishing smooth with cement slurry as required and Stainless

Steel sink of 0.45 mt x 0.45 mt size of approved quality and

make with required all fitings & fixitures etc. comp as per

instruction given by site in charge at all floors. (Basic rate of

Granite Rs.1,200.00 / S.M.)

Ground Floor 0.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

34 Providing and filling in depressions of Bath and W.C. At all

floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by Engineer

in charge etc. comp.For all Floors.

All Floor 0.00 C.M 500.00

(SMC SOR,Pg No.6, It No. 61) MR

35 Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows &clearstory windows incl. Indian teak wood

frames of finished size 12cm x7cm.incl. anodized aluminum

fixtures & fastenings incl. Primer coat of approved quality &

two coats of oil painting etc. For all Floor (A) Fully Panelled

All Floor 0.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

36 Providing and fixing FRP frame size 125x65 mm and 35 mm

thick FRP shutter with wood grain raised panneled design

finish shutter having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame is to filed up

with injected polyurethane foam done in situ along with

embedded wooden pieces for stiffening & also taking hinges 20.00 S.M 2019.98

& fintures. The whole FRP frame & shutter is to be water

proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S. hinges with

fastener sleeve & alluminium fixtures & fasteningsFor all

(SMC SOR,Pg No.5, It No. 55)

37 Providing & fixing 35mm.th. Flush Door Solid Double Core type Both

Vennered & 1.5 mm0.00

th.laminate shall be pasted on both s

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 20.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

38 Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 63.50 x

x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt)

horizontal Two track member size 61.85 mm x 31.75 mm x

1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.)

vertical member of size 61.85 mm x 31.75 mm x 130 mm (of

jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding

shutters of horizontal member size 40 mm x18 mm x

mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) 0.00 S.M 1705.67

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt.

of 0.457 Kg/mt) with 5 mm thick tranparent bronze colour

tineted float glass with powder coated

aluminium fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc. complete for window.

(A) Same as above but colour anodized 0.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.16

39 Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 95 mm x

mm x 1.17 mm (of jindal section no:2459 @ Wt. of

Kg/mt), horizontal Three track member size 92 mm x

jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member

of size 92 mm x 31.75 mm x 1.50 mm (of jindal section

no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40 mm x 18 mm x 1.29 mm (of jindal 0.00 S.M 1591.87

section no:8947 @ wt. of 0.456 kg/mt), vertical member of

size 40 mm x 18 mm x 1.29 mm (of jindal section no:8949 @

wt. of 0.456 kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminium

fittings & fixtures and transparent silicon sealant glass fixing

to frame as per details etc.

(A) Same as above but colour anodized

All Floor 0.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A),Pg No.16

40 Providing and fixing standared extruded ofalluminium section

of size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with

colour Powder Coated alluminium frame for ventilation with 0.00 S.M 1175.56

5 mm thick frosted glass as details etc complete for

A) Same as above but Colour anodized 13.00 S.M 1175.56

SMC SOR Alluminium Work ITEM NO.4A,Pg No.16

41 Providing & laying granite slab 18 mm thick in Window-

Door seal,Frames Etc laid on 10 mm thick cement mortar 1:4

(1 Cement: 4 Coarse sand) with necessary adhesive material

and finished with flush pointing in white or colour cement,

including rubbing & polishing comp. (Basic Rate: Rs.

1000.00/S.M.).For all Floors.

For all Floors. 39.00 S.M 2026.00

SMC SOR , ITEM NO.41 MR PAGE No.4

42 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 386.00 R.M 43.43

SMC SOR, ITEM NO.42 PAGE No.4

43 Providing & fixing Powder Coated Aluminium partly glazed and

partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt &

Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick

clear float glass of approved make including all other necessary

fittings and fixtures. Entire work will have to be made water proof

using necessary rubber sectioned wherever required. Gaps all

round the frame to be filled with approved water proof sealent.

Bottom portion of doors both side to be covered with 12mm thick

prelaminated particle board of approved make and quality and as

(A) Same as above but Colour anodized

For all Floors. 0.00 S.M 2400.00

SMC SOR Alluminium Work ITEM NO.7(A),Pg No.16 MR

44 Providing & fixing partly panel & partly glass Powder Coated

Aluminium doors with aluminium section of Hindalco, Jindal

Narmada,Banco or Equivalent approved make having Poder

Coated outer frame Leg Partition section of 63.50 mm x 38.10 mm

having weight 1.158 kg. / R.M. shutter section having size

mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle

kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881

kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal

Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm thick sheet

glass in acid frogting and 12 mm thick prelaminated sheet of

Greenlam, Panama or archid make as approved by Engineer-in-

charge including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized

For all Floors. 0.00 S.M 3237.00

SMC SOR Alluminium Work ITEM NO.6(A),Pg No.16 MR

45 Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around

square or round bars with round headed bolts & round headed

bolts and nuts or by screws incl. Priming coat of Red lead

paint etc. comp. (A) Plain grill For all Floors

(A) Plain grill

For all Floors. 0.00 Kg. 109.41

SMC SOR, PAGE NO 5 IT NO

46 Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to

give an even shade including cleaning the

surface of all dirt, dust and other foreign matters.

For all Floors 0.00 S.M 68.57

SMC SOR, colour works,item no.-8,Pg No.15

47 Providing and fixing stainless steel ( Grade 304) railing made

of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel

required size, on the top of the floor or the side of waist slab

with suitable arrangement as per approval of Engineer-

incharge, (for payment purpose only

weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners etc.)

SMC SOR, ITEM NO 120,Pg No.11, MR 0.00 Kg. 450.00

48 (1) The whole work is to be executed through specialized

B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of

following operations. (a) Applying and grouting a slurry coat

of neat cement using 2.75 kg/sqm of cement admixed with

proprietary water proofing compound comforming to

IS:2645 over the R.C.C. slab including cleaning the surface

before tratment.(b) Laying cement concrete using broken

bricks/brick bats 25 mm to 100 mm size with 50% of cement

mortar 1:5 (1 Cement : 5 Coarse sand) admixed with

proprietary water proofing compound conforming to IS:2645

,brick bats is finally covered by jointless cement plaster

20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished with

trowel with false chequered marking of 300 mm.size.The

treatment is carried along the vertical surface of the parapet &

other adjoining wall up to height of about 300 mm in a shape

of quarter round vata Incl. curing etc. Comp. With average

thickness of 120 mm and minimum thickness at khurra as

(c) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for final

test. All above operations to be down in order and as directed

and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as

mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 93.00 S.M 511.00

SMC SOR, PAGE NO 7 IT NO 62 B M.R.

(A) Providing and laying water proofing treatment to vertical

and horizontal surfaces of depressed portions of W.C.,kitchen

and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water

proofing compound confirming to IS:2645 about 25 mm. th'

For all Floors 0.00 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

49 Providing and laying broken china mosaic flooring for terrace

using 12mm to 20mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain or slope and to be tempered to

bring mortar creme out upto surface using white cement

including rounding off junctions and extending them upto

cm along the wall clearing with water and oxalic acid etc. as

SMC SOR, PAGE NO 12 IT NO 131 93.00 S.M 779.70

50 Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 483.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 112.00 S.M 40.59

SMC SOR ,coiour works,Pg No.15,item no.-4

51 Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 483.00 S.M 83.36

(B) for ceilings and soffits

For all Floors 112.00 S.M 83.36

SMC SOR , coiour works,Pg No.15,item no.-5

52 Providing & applying two coats of weather shield max paint

(3 coats may be required in case of darker colours.)of ICI

Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers specification

and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers. Surface

Preparation : surface is thoroughly clean, dry and free from all

loose dirt, chalk, grease, fungi, algae and flaking paint. This

can be achieved by brushing with a wire/ stiff coir brush,

followed by water jetting if required. Fill up all minor cracks

and defects with white cement and sand mixture in the ratio

1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and Clean

the surface thoroughly using wire brushes. Priming: Apply a

liberal coat of exterior acrylic primer and allow it to dry for 4-

5 hours. Application of putty is not recommended. Minimum

4-6 hours duration is required between each coat of weather

For allmax paint.For all Floors.

Floors 158.00 S.M 82.00

SMC SOR, coiour works,Pg No.15,item no.-17

53 Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick cement

mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5

laid and finished with flush pointing in white or colour

cement including rubbing and polishing complete. (Basic

Rate:- Rs.1347.46/S.M.)

For all Floors. 22.00 S.M 2410.00

SMC SOR PAGE NO 4,IT NO 39 M.R.

54 Providing & laying granite slab 18mm thick in skirting, risers

of steps,dedo and pillars laid on 10mm thick cement mortar

1:4 (1 Cement : 4 Coarse sand) and finished with flush

pointing in white or colour cement including rubbing &

polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

SMC SOR PAGE NO 4,IT NO 40 M.R. 2.00 S.M 2449.00

55 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia

M.S. bar bent to shpe with hooked ends to RCC slabs curing,

layig including painting the exposed portion of loops, all as

per standard design complete.

For all Floors. 4.00 Nos 135.47

SMC SOR , PAGE NO 5, IT NO

56 Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross

beams,hip & trussed purlins connected to common raffers &

the like. For all Floor

For all Floors. 5.00 Qtl. 9108.48

SMC SOR ,Pg No.9,IT NO 98(A)

57 Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

40x40x6mm. with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl. applying a

priming coat of Redlead paint etc. comp.

Ground Floor 6.00 S.M 6158.35

SMC SOR , PAGE NO 5, IT NO

58 Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined

with grey/White cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 0.00 S.M 1050.00

59 Wall Vinyl Sticker 30.00 SQ. FT. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

60 Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100

SMC SOR, PAGE NO.13,IT NO 147 (MR)

61 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

SMC SOR, PAGE NO.13,IT NO 148 (MR)

62 5mm PVC sheet Eco Vinyl (Any size) 30.00 SQ. FT. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

63 Decorative theme base designing & painting with all

waterproof materials

SMC SOR, PAGE NO.13,IT NO 150 (MR)

64 Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or equivalent

make including cost of all equipments, tools, material, labour,

etc. Standard procedure as mentioned in manufacturer's

specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of

work. The rate shall also include cost of drilling of hole of

required diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required air blower and

other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but

excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and

equipments, etc. complete as directed by the engineer-in

SMC SOR, PAGE NO.11,IT NO

WATER & SUPPLY SANITATION

65 Prov.& Fixing water closet squatting pan (Orissa type

W.C.pan) at all floor levels, size 500mm x 400 mm incl.

mm size "P'or "S" trap for water closet squatting pan joining

the trap with the pan & soil pipe in C.M. 1:1 (1cement :1 fine

sand) etc. Comp.(A) Vitreous china long

Make- Cera S3010109, Parry ware C0117CS/C0117*

Jaquar ,HindWare

For all Floors. 0 Nos. 3277.39

SMC sor- Sanitary Items,Page no21,It No.

66 Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap with normal closing seat

cover L bend ncluding jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous china

Make- Cera CONVENTIONAL B1510121 , Parry ware

C0297*/ C0278, HindWare sleek 20011, Jaquar- CNS-WHT-

For all Floors. 8 Nos 3530.09

SMC sor- Sanitary Items,Page no20,It No.

67 Prov.& Fixing Health Faucet ABS Body with wall Hook and

1 Meter chrome plated PVC Hose Pipe

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar

ALD-587 ,HindWare F160109

For all Floors. 0 Nos 1009.9

SMC sor- Sanitary Items,Page no22,It No.

68 Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-

1089NSQ ,HindWare F860075

For all Floors. 8 Nos 3500.99

SMC sor- Sanitary Items,Page no22,It No.

69 Providing & fixing Wash Hung basin with single hole for

pillar tap , Size- 550 x 400 mm at all floor levels, with C.I. or

M.S. Brackets painted white incl. cutting holes & making

good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH),

Jaquar SLS- WHT -6801 ,HindWare10004

For all Floors. 9.00 Nos 3276.63

SMC sor- Sanitary Items,Page no21,It No.7

70 Providing & fixing 600 mm.x 450 mm. mirror of superior

glass at all floor levels, mounted on 6 mm. th. A.C. sheet or

plywood sheet & fixed to wooden plugs with C.P.brass

screws and washers etc. For all Floor

All Floor 9 Nos 859.41

SMC sor Page no7 , It No.72

71 Providing & fixing C.P. brass pillar cock with copper

connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. No.: F650003, Jaquar FLR-5011N

For all Floors. 9 Nos 1457.97

SMC sor Sanitary Items,Page no21, It No.

72 Providing & Fixing 15 mm Dia bib tap with wall Flange at all

floor levels, polished bright etc. comp

Make- Cera F2013151 BIB COCK, Parry wareG3104A1,

HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB

All floor 12 NO 1353.77

SMC sor Sanitary Items,Page no21, It No.

73 Providing & Fixing 15 mm Dia 2 way bib tap with wall

Flange at all floor levels, polished bright etc. comp

Make- Cera F2013163, Parry ware G4834A1, HindWare Cat.

No.: F530004, Jaquar FLR-5041N

All floor 0 NO 1828.81

SMC sor Sanitary Items,Page no21, It No.

74 Providing flush cock consisting lever, cartridge sleeve &

flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 , Parry ware T9824A1&T9823A1, Jaquar FLR

5083 KN , CONCEALED BODY ALD-081,HindWare

F280052 & CONCEALED STOP COCK F850105

All floor 0 NO 2056.47

SMC sor Sanitary Items,Page no21, It No.

75 Providing & fixing 15mm C.P. brass angle valve (Stop Cock)

with C.P. copper connecting pipe 450 mm long and nuts,

washer and brass flange complete, including cutting and

making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat.

No.: F440020 F850094, jaquar CON 053 KN

For all Floors. 9 Nos 1564.36

SMC sor- Sanitary Items,Page no21,It No.

76 Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished

wall flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua

ACN 1121N ,HindWare F880007

For all Floors. 8 Nos 924.24

SMC sor Sanitary Items,Page no21,It No.

77 Providing & Fixing stainless steel recessed type Soap dish of

approved make. Including providing & fixing screws,

washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-

1131N,HindWare F880011

For all Floors. 9 Nos 839.91

SMC sor Sanitary Items,Page no21,It No.

78 Providing & fixing of overhead shower 80 mm (3”) dia with

3 flow with Overhead Shower arm 200 mm with wall flange

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989

,HindWare Cat. No.: F160144

For all Floors. 4.00 Nos 1526.42

SMC sor Sanitary Items,Page no21,It No.

79 Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 110x110 mm diameter with jali of the following

nominal diameter of self cleaning design with C.I. scread

down or hinged grating including the cost of cutting and

making good the walls.

All floor 22.00 Nos 586.27

SMC sor.Page no 8,It No.

80 Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

13592 (Type"B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/

Finolex make for soil and waste discharge system at all floor

levels incl. All fixtures like bends, tees,shoe etc. jointed with

resin of approved brand & manufacture etc. comp.(M.R.)

SMC sor,Page no 8 It No. 84 M.R.

81 Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/ Supreme/ Jain/ Astral/ Tulsi/ Finolex

make for rain water at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.) (A) 75 mm. Dia.

(C) 160 mm. Dia. 0 R.M 674

SMC sor ,Page no 8, It No. 85 M.R.

82 Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

(B) 110 mm Dia. 4 NO 50

SMC sor- Page no.8, It No.

83 Providing & Fixing Kathi around the vertical PVC drainage

pipes for concealing with cement plaster 20 mm avg thickness

(CM 1:3 [1 cement :3 coarse sand]) finishing as per

instruction given by Eng. incharge. For

75mm PVC pipe 20.00 R.M 173.00

(B) 100 mm /110 mm PVC PIPE 20 R.M 180

SMC sor- Page no.8, It No. 93 MR

84 Providing, Laying and jointing on true line and level UPVC

pipe (SCH-40) line of prince/Supreme/Jain/Astral/

Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No.

85 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water supply

line at all floor levels incl. fixtures like bends, tees, shoe etc

joined with resin of approved brand & manufacture etc.

comp. Pipe shall be fixed on the wall the help of clamp at

every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including

cost of all materials.

15 mm dia 15 R.M 166

50 mm dia 30 R.M 510

SMC sor Page no8 It No. 87 MR

86 Providing and fixing M.S. holder bat clamps at all floor

level,of approved design to C.I. or S.C.I pipes including cost

of cutting holes and making good the wall etc. comp. (M.R)

SMC sor- Page no8, It No. 90 MR

87 Providing & fixing Z - clamps at all floor levels of approved

design to C.I. S.C.I. or PVC pipes including the cost of

cutting holes & making good the wall etc.

Complete - 100 mm dia as per architect instructions. (M.R)

(A) 40 TO 50 mm Dia 15.00 NO 62

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

88 Providing and fixing gun metal check or non return full way

wheel valve at floor levels,etc. complete.

(B) 25 mm. dia 6 NO 420.63

SMC sor Page no8,It No.

89 Providing and fixing abonite ball cock of approved quality as

directed etc. comp.

SMC sor- Page no 8,It No.

90 Providing, Lowering and laying joining R.C.C. NP2 CLASS

pipe in cement mortar in proportion 1:1 of following nominal

internal diameters including testing of pipes and joints etc.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 20-21, Page no1 It No.1

91 Providing and fixing s.w. Gully trap with C.I. gratting brick

masonary chamber and water tight Pre cast R.C.C.cover of

300mm X 300mm size (inside) including plastering smooth

inside and outside 15 mm thick in C.M 1:3 etc. comp.i)

square mouth traps (A)300 MM X 300 MM Size - P type.For

SMC sor,Page no 7, It No.

92 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 0.00 No. 3166.77

Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.'.(A) Precast

RCC heavy duty Cover instead of C.I. Cover

(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0 Each 233.85

SMC sor, Page no.7, It No.75

93 Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm

size), Foundation concrete 1: 5: 10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. Inside

dimension, 455 x 610 mm &450 mm deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0 Each 242.39

SMC sor - Page no7,It No.76

94 Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt.

Size having weight not less than 35 Kg. etc. complete.

SMC sor- Page no.8, It No. 83 4 NO 958.17

95 Providing and fixing G.I, Rain water spout of 50 mm dia and

SMC sor- Page no6 It No. 64 3 NO 101.91

96 Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and

15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe to

wall with C.P. flange complete including cutting and making

good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar

URS-WHT 13261H ,HindWare BACK SMALL

SMC sor- Sanitary Items,Page no.21, It No.8

97 Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined with

grey/White cement slurry (1:1) incl. Rubbing & polishing etc.

complete. (M.R.)( Basic Cost Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 MR 4.00 S.M 1050

98 Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work

incl. boxing, centering, vibrating, curing & mixed with

approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the manufacture of

the water proofing material, concrete work for top, bottom

slab & side pardi for under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm th'

C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4

outside wall, inside R.C.C. pardi as per design, 10mm.th.

water proofing cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face of tank curing

etc. comp. incl. Locking arrangement, outlet, inlet, overflow

& wash out pipe arrangement as necessary & C.I. Cover

x .045 weight not less then 35kg. etc. com. as per structural

drawing excluding Steel & as directed by Engineer-in-charge

Under Ground water Tank 5000.00 Lit 6.87

SMC sor - It No.

99 Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor levels,

in flooring, treads of steps & landings laid on a bed of 12 mm.

Av. Th.C.M.1:3 (1cement : 3 sand) finished with flush

Under Ground water Tank 1.50 SM 900.29

SMC SOR, Page no4, It No.

100 Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor levels

in skirting risers of steps & dado on 10 mm. th. C.M.1:3

(1cement :3 sand) including necessary cement paste for fixing

and joined with white cement slurry etc.complete. For all

Under Ground water Tank 13.00 SM 932.02

SMC SOR, Page no4, It No.

101 Providing & fixing IS Mark TMT FE 500D reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.

comp. Upto G.L./P.L.

Upto G.L./P.L. 690.00 Kg. 77.29

SMC SOR- Page no1, It No.

102 Providing erecting and fixing double coated

Sintex/Super/Reno PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection etc.

complete on terrace.

SMC SOR- Page no 8, It No.

ELECTRIFICATION WORK

1 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr

length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box,

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete .Cat. III

2 Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

ceiling with following type accessories

Cat. III 25.00 257.55 NO.

3 Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in

wall / ceiling as per pipe erected with following type of

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

4 Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following

type erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete .Cat. III

5 Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of

(A) With medium class Rigid PVC pipe and accessories

(d) 3 wire 2.5 sq. mm 126.00 102.01 Mtr.

6 Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet 200.00 295.93 Ea.

7 Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp holders,

(iii) 10 to 15 watts, Cat-lll 21.00 188.87 Ea.

8 Providing and erecting Approved make Ceiling fan with

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing 7.00 1596.81 Ea.

hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

9 Supplying & erecting single phase approved make industrial

exhaust fan suitable for medium duty ring mounted low noise

operation suitable for medium duty having following dia size

and maximum speed in RPM

[A] 305 mm dia 900 RPM,Cat.II 78.00 2054.34 Ea.

10 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured

copper cable 1.1 KV grade to be erected as directed of

following size.

(E) 3 core 2.5 Sq. mm 125.00 137.36 Mtr.

11 Providing & erecting approved make street light / wall

mounting junction box compression moulded from SMC

(thermoset plastic) vertical sliding cover having locking with

square head stud loop in / loop out in built terminal suitable

for four core cable, waterproof of I.P. 54 protected with

clamp or bolt nut & earth bolt of following size.

12 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

(a) single door (IP-30)

13 Providing and erecting Approved make RCCBs conforming

to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for

following Max. rating erected as directed.

(i) 40 Amps.FP, Cat. III 10 2637.11 Ea.

SMC SOR 3-10-1 b

14 providing and erecting Miniature circuit breaker single pole

6A to 25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark

Cat.III 30 112.11 Ea.

SMC SOR 3-10-1.(B)

15 Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity

(A) 6 to 32 Amp,Cat.III . 14 299.97 Ea.

SMC SOR 3-10-2.

16 Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 50mm having

80-200 Micron galvanising, Inner pipe dia of 25 mm having

200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy

duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner

chemical (CCM Compound)- Resistivity:- 0.2 / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be

[A] For electrical installation up to 440 V

Length of Pipe - 1 Mtr 14 4591.46 Ea.

Back filling compound - 1 Nos. of Bag of 15 Kgs.

17 Providing and erecting required size HOT deep Galvanised

iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT 35.86 77.77 Kg.

panel board, Motors etc. using proper clamp.

18 Providing and erecting HOT deep Galvanised iron strip wire

19 Providing & erecting open well type horizontal mono block

pump set with stainless steel body having following

(A) 0.5 H.P. single phase open well motor pump set having

discharge of 115 LPM @ 15 mtr. head suitable for 32 mm

dia. delivery pipe with control panel

Cat.II 8 7934.56 Ea.

20 Supplying and erecting Direct On-line Electronics Starter

with 2-5/4-10/8-14/10-16 Amp. Rating relay (variable current

setting) directly operated in totally insulated elegant enclosure

and 18 Amp. Rating power relay with start - stop button for

single phase operation up to 3 HP as per complete erected on

P.W. Block with following features. 8 1603.88 Ea

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping.

1 Nos of Pay & Toilet Total Amount :-

1 Nos of Pay & Toilet Total Amount :-

Consider 7 Nos of Pay & Toilet Total Amount.

Consider 7 Nos of Pay & Toilet Total Amount.

EXECUTIVE ENGINEER

SIGNATURE OF CONTRACTOR SOUTH WEST(ATHWA)ZONE