Annual Plan-Changaroth GP Pro.no 61/25-26 CH Muhammad Koya library building Renovation,ward-12-building Renovation- General Civil Work

Amount

building Renovation

15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below

15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos cement Sheet

15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete.

11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete

12.26.2:Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm thick Cement bonded wood particle board as per IS:14276

13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD189391/2025-2026:Laterite Stone Sliced Cladding-Providing and fixing dry cladding up to 10 metre heights with 20 mm thick gang saw cut laterite sliced stone with (machine cut edges) of uniform colour and size upto 30x15 cm, fixed to existing plasterd wall surface and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-Charge. (Modified 7.40.1)

OD190191/2025-2026:Designing , fabricating ,testing installing and fixing in position curtain wall with Aluminum composite panel cladding with open grooves for linear as well as curvilinear portions of the building , for all height and all levels etc. .including ; a)structural analysis & amp ; design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design . b) providing ,fabricating and supplying and fixing panels of aluminum composite panel cladding in pan shape in metallic color of approved shade made out of 3mm thick aluminum composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each 0.5mm thick) . The aluminium composite panel cladding sheet shall be coil coated with Kynar 500 based PVDF / lumiflon based fluoropolymer resin coating of approved color and shade on face # 1 and polymer (service )coating on face # 2 as specified using stainless steel screws ,nut bolts ,washes cleats , weather silicone sealant ,backer rods etc . c)The fastening brackets of Aluminium alloy 6005 T5 /MS with hot dip Galvanized with Hot Dip Galvanized with serrations and serrated washes to arrest the wind load movement , fasteners ,SS 316 Pins and anchor boilt of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing the item includes cost of all material and amp ; labour component the cost of all mock ups at site cost of all samples of the individual components for testing in an approved laboratory ,field tests on the assembled working curtain wall with aluminium composite panel cladding ,cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation .Base frame work for ACP cladding is payable under the relevant aluminium items . The contractor shall provide curtain wall with aluminium composite panel cladding ,having all the performance characteristics all complete .as per the architecural drawings as per item description as specified, as per the approved shop drawings and as directed by the engineer in charge. However for the purpose of payment only the actual area on the external face of the curtain wall with aluminium composite panel cladding(including width of groove)shall be measured in sqm up to two decimal places.

50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

OD196337/2025-2026:Wood particle board confirming to IS 12823 grade 1 type II, in pannelling fixed in aluminium doors windows shutters and partition frames with C.P. brass / stainless steel screws etc. Complete as per arcitectural drawings and directions of Engineer-in charge.Pre-laminated particle board with decorative lamination on both sides(modified 21.2.2)

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

OD205514/2025-2026:MULTI WOOD PANEL LETTER -Providing and installing letters 15 to 25cm height using multi wood panel 18mm thickness ,,design as per departmental approved drawings, including cost of materials ,CNC cutting charges ,all labour charges and conveyence etc complete.

OD205684/2025-2026:supplying and fixing square uPVC gutter 160mm size with MS flat 25*5mm size @60 cm c/c fixing on roof member (purlin or rafter ),bolts nuts and washer etc including making necessary connection with rain water pipe complete.

OD206010/2025-2026:supplying and fixing best quality cotton type cloth curtain ,fixing to steel of 20mm size tied end with ornamental end cap fixing aluminium hooks including cutting and stiching and all charges etc complete

KAREEM M (BID ID -2290147)

AMEER (BID ID -2289954)

BIJU. TV. (BID ID -2289985)

Bidder Name

VK SAJU

BIJU. TV.

KAREEM M

AMEER