Construction of New Aganwadi Building at Chitravadi Village Taluka-Nandod Dist-Narmada Package-04

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of

2 serviceable materilas and disposal of unserviceable materials with all lead 14.60 Cum 576.30

and lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar including stacking of

3 serviceable materilas and disposal of unserviceable materials with all lead 47.40 Sqmt 50.28

Dismentling doors, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

Dismentling steel work including distempering and stacking the materials

with all lead and lift.

Excavation for foundation upto 1.5 m depth including sorting out and

6 stacking of useful materials and disposing off the excavated stuff upto 50 50.30 Cum 125.86

Meter lead. (D) Soft rock not requiring Blasting

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff

upto 50 Meter lead. (D) Soft rock not requiring Blasting

Filling in foundation and plinth with sand in layers of 20 cm. Thickness

8 including watering ramming and consolidating etc. comp. 13.30 Cum 489.28

Filling foundation and plinth with murrum or selected soil in layer of

9 cm in thickness including ramming watering and consolidating etc. 36.10 Cum 304.60

Anti-Termite System: Providing and laying of permanent piping

technology anti-termite treatment before flooring work by installing LLDP

(Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with

inbuilt pressure compensation chip every 30 cm interval in the tube,

having working pressure of 2 Kg/cm2 and release rate of 1.9 Itr/hour fixed

by P-clips and nails.The LLDP pipe shall be installed at the entire

periphery of the building and at internal network of building at a depth of

20 to 200 mm under floor at every 2 to 3 mtr. c/c distance (adjusted as per

building layout) & ends of loop pass through a PVC elbow of minimum

10 mm ID at junction box of wall and floor level, entering into a steel 47.40 Sq.m 63.63

reinforced grooved flexible pipe of minimum 22 mm ID leading into

junction box and the loops shall terminate in junction boxes & test every

junction during injecting chemicals for termite control

treatment.Providing and laying cement concrete 1:3:6 (1-Cement : 3-

coarse sand : 6- machine cut stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6-

11 machine cut stone aggregates 40 mm nominal size) and curing complete 9.90 Cum 3063.66

excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, and Mass concrete.

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (D) Columns up to Plinth

Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (D) Columns on Ground

Providing and laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (D) Columns on Terrace

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (C) Ground Beam and

Providing and laying controlled cement concrete M-150 and curing

17 complete including the cost of form work but excluding the cost of 5.50 Cum 4441.13

reinforcement for reinforced concrete work in (C) Plinth Slab

Providing and laying controlled cement concrete M.200 and curing

18 complete including the cost of formwork and excluding reinforcement for 4.30 Cum 6293.69

reinforced concrete work in (C) Beam at Ground Floor

Providing and laying controlled cement concrete M-200 and curing etc.

19 complete including the cost of form work and reinforcement for reinforced 0.40 Cum 6704.05

concrete work in (C) Chhajja at Ground floor

Providing and laying controlled cement concrete M-200 and curing etc.

20 complete including the cost of form work and reinforcement for reinforced 0.41 Cum 9003.20

concrete work in (C) Lintel at Ground floor

Providing and laying controlled cement concrete M.200 and curing

21 complete including the cost of formwork and excluding reinforcement for 5.10 Cum 7509.70

reinforced concrete work in (C) Ground floor Slab

Providing TMT Bar FE 500D reinforcement with fusion bonded Epoxy

coating not less than 175 micron thickness and up to 300 micron to

22 reinforcement bars as per IS-13620-1993 /ASTM-775M (including testing 4239.00 kg 77.29

of coating at plant and all taxes) for R.C.C. work including bending, binding

and placing in position complete upto floor two level.

Providing TMT Bar FE 500D reinforcement with fusion bonded Epoxy

coating not less than 175 micron thickness and up to 300 micron to

reinforcement bars as per IS-13620-1993 /ASTM-775M (including testing

of coating at plant and all taxes) for R.C.C. work including bending, binding

and placing in position complete. above Floor two Level

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

24 (A)In beams and joists, channels angles Tees, flats, with connecting plates 0.27 Quintal 9108.48

or angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the surface

of all dirt, dust and other foreign matter.

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and fixing M. S. grills of required pattern to frames of windows

etc. with M. S. flats at required spacings and frame alround having min.

weight of Grill 25kg/sq.m, square or round bars with round headed bolts

and nuts or by screws including priming coat of approved quality and two

coats of enamel paint, as directed by engineer in charge (A) Plain Grill

Providing and fixing 90cm high Stainless steel railing made from anti

corrosive 304 grade S. S. pipe of 50mm dia. (16 Gauge) as hand rail with S.

S. 304 grade Balusters / Posts of Pipe 50mm dia. (16 Gauge) as a vertical

27 support fixed in RCC slab at 1.2m c/c including two horizontal S. S. pipes of 8.86 Rmt 2578.53

16mm dia. (16 Gauge) at equal Distance fixed by 18.75mm dia (16 Gauge)

S. S. pipe with baluster including accessories as per Detailed Drawing as

directed etc. complete.

Brick work using common burnt clay building bricks having crushing

28 strength not less than 35 kg/sq.cm. in foundation and plinth in cement 2.90 Cum 4279.98

mortar 1:6 (1 cement : 6 fine sand) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6 (1cement : 6 fine sand)

Conventional (Ground FLoor)

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6 (1cement : 6 fine sand)

Conventional (Terrace Floor)

Half brick masonry in common brunt clay building bricks having crushing

31 strength not less than 35Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in 17.70 Sqm 640.77

super structure. Conventional for Ground floor..

Providing and fixing 150 mm wide, approved quality chicken wire mesh at

junction of brick work and RCC work or two dissimilar surfaces, at all

32 heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before 14.30 Sqm 295.12

applying the plaster, including curing etc. complete

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls / concrete wall for interior

33 plastering and finished even and smooth along with floating coat of neat 140.30 Sqm 231.38

cement slurry etc. comp. in (ii) Cement mortar 1:4 (1-cement :4-sand) 1)

Plaster at Ground Floor

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls / concrete wall for interior

plastering and finished even and smooth along with floting coat of neat

cement slurry etc. comp. in (ii) Cement mortar 1:4 (1-cement :4-sand) 2)

Plaster at Terrace Floor

Providing 10 mm thick smooth cement plaster in single coat for plastering

on ceiling and soffits of stairs and finished even and smooth along with

floating coat of neat cement slurry etc. comp. (i) Cement mortar 1:4 (1

cement: 4 sand). 1) Plaster at Ground Floor

20mm thick double coat sand faced cement gutka plaster on walls upto

height 10 metres above ground level consisting of 12mm thick backing

36 coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 106.30 sq.m 353.98

1:1 (1-cement : 1-sand) including 1cm x 1cm grooves etc. complete.

37 Providing throating or plaster drip and moulding to R.C.C. Chhajja.. 11.90 Rmt 44.07

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Applying two coats of (white cement based) or (acrylic lappy (putty)) or

equivalent and two coats of primer of approved brand and manufacture on

new wall surface to give an even shade including thoroughly brushing the

38 surface free from mortar dropping and other foreign matter and sand 189.20 sq.m 40.59

papered smooth. for All floor.

Wall painting (three coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

39 including throughly brushing the surface free from mortar droppings and 153.10 sq.m 128.38

other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Finishing wall with Weather proof exterior 100% acrylic emulsion paint

With one coat of primer on wall surface to give an required shape even

shade after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete for All floor

Providing And filling with good quality cinder(steam coal) as directed by

engineer in charge in sunks in layers of 15 cm thick,including

42 watering,placing ,ramming well etc as directed, for all floor. 0.65 Cum 560.14

Provoding and fixing flush door shutters, solid core construction with

frame of first class hardwood with cross board and face veneer or plywood

face panels, including anodised alluminium butt hinges with necessary

43 screws. (B) Non-decorative type and block board core anodised 6.70 sq.m 1829.74

alluminium butt hinges in flush door shutters (2) 35 mm thick.

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP

depress panel shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done in situ alongwith embedded

44 wooden pieces for stiffening & also taking hinges & fintures. The whole 1.60 sq.m 2377.76

FRP frame & shutter is to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings & fastener sleeve.

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt , horizontal Three track member size 92mm x 31.75mm x

1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x

1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size

40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size

40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc

Providing and fixing standared extruded of alluminium section of size

63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with colour anodized

46 alluminium frame for ventilation with 5 mm thick frosted glass as details 2.90 Sq.m 1175.56

etc complete for Ventilation

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick , in skrting risers of

48 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse 4.10 Sq.m 1592.40

sand) and jointed with white cement slurry

Providing and laying Machine cut, free edges, mirror polished Granite Slab

flooring over 18mm (Average) thick base of cement mortar 1:6 (1-cement :

49 6-coarse sand) laid over and jointed with grey cement slurry mixed with 8.70 Sq.m 2368.24

pigment to match the shade of slab including rubbing and polishing etc.

complete. (A) 18mm thick

Providing and laying Machine cut, free edges, mirror polished Granite Slab

18mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick

50 cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray 1.30 Sq.m 2366.27

cement slury mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

51 coarse sand ) finishing with flush pointing in white cement. 1.40 Sq.m 1207.32

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps

52 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 11.60 Sq.m 1070.50

coarse sand ) finishing with flush pointing in white cement.

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or

53 L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing 2.10 Sqm 1121.80

and polishing etc. complete. (B) 30 mm thick

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and

54 dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 3.90 Sqm 1070.50

jointed with white cement slurry

Providing and fixing mirror polished 18 mm thick Granite with full round

edge and polished of approved quality in clading on sill and around the

doors/ windows/ ventilation with 20 mm thick cement plaster CM (1:4)

and fixing with cement slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc. complete.

Providing and laying 40 mm thick IPS (Indian Patent Stone) flooring in

cement concrete 1:2:4 (1-cement : 2-coarse sand : 4-graded stone

aggregate of 20 mm nominal size) laid in one layer over prepared base and

finished with a smooth floating coat of neat cement mixed with approved

56 yellow colour pigment of required shade at 0.35 kg/Sq.m to obtain 12.55 Sqm 379.96

uniform colour and finish, including surface preparation, compacting,

trowel finishing, curing and complete as directed by Engineer-in-Charge.

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x9.8 mm having with water absorption less

than 0.5% and conforming to IS:15622 of approved make in all colours and

shades in for outdoor floors such as footpath, court yard, multi modals

57 location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement: 4 10.20 Sqm 2037.78

coarse sand) in all shapes & patterns including grouting the joints with

white cement mixed with matching pigments etc. complete as per

direction of Engineer-in-Charge.

Providing and laying broken chine mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

58 using white cement including rounding off junctions and extending them 47.40 Sqm 779.70

upto 15 cm along the wall,clearing with water and oxalic acid etc. as

Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

59 required capacity each with all necessary fittings and connection etc. 2000.00 Litre 3.94

complete on terrace.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe

( SCH- 40) for cold water including fittings make as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

62 two metre C/C or shall be concelled as directed including necessary 6.00 Rmt 72.65

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

63 potable water of following dia. nominal bore tube fittings and clamps 10.00 Rmt 447.72

including making good the wall, ceiling and floor etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

64 potable water of following dia. nominal bore tube fittings and clamps 8.00 Rmt 253.82

including making good the wall, ceiling and floor etc. complete. [C] 25mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC

(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

65 potable water of following dia. nominal bore tube fittings and clamps 6.00 Rmt 170.36

including making good the wall, ceiling and floor etc. complete. [A] 15mm.

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing laying (to level or slopes) and jointing reinforced concrete Light

duty non-pressure pipes I.S. class NP2 of the following internal diameter

66 with collars and butt ends prepared for collar joints including testing of 10.00 Rmt 678.03

joints complete.(D) 300mm

Providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase 240 V,50Hz. having

67 characteristic of quick action & tripping with all advance feature & do not 6.00 Rmt 892.39

incorporate any electronic component. for following Max. rating erected

as directed (iI) 40 Amps. DP Cat-III

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of cutting

and making good the walls.

Provision, Supplying and fixing White vitrious ching W.C. sqatting pan

Orrisa type 580 x 400 size with 100mm P or S trap, 25mm dia. C. P. Brass

flush valve and G. I. inlet connection etc. comp. (A) Vitreous ching long

pattern white or color.

70 Providing and fixing brass screw down stop tap.(A) 15mm dia. 4.00 Each 205.83

Providing and fixing ball cock of approved. quality as directed.(A) Copper

71 Metal (ii) 50mm dia. 1.00 Each 189.84

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia.

Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior

75 glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to 1.00 Each 859.41

wooden pluge with C.P. brass screws and washers.

Providing and fixing screw down bib taps of following size.(A) Brass screw

down bib tap polished bright. (i) 20mm dia.

Providing and fixing screw down bib taps of following size.(A) Brass screw

down bib tap polished bright. (i) 20mm dia.

78 Providing and fixing Rubber plug for sink or wash basin. 2.00 Each 17.15

Providing and fixing S.W. gully trap with C.I. grating brick masonry

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth traps (B) 150mm x

100mm size P or R type

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

80 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) 1.00 Each 2932.93

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm

deep for single pipe line.

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Constructing brick masonry chamber for underground C.I. Inspection

chamber and bends with bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

81 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) 1.00 Each 3660.76

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two inlets.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and

filling brickbats with dry masonry work at top for 45cm. height including

82 covering the top with stone including providing vatas in C.M. 1:3 with 1.00 Each 3486.88

finishing curing etc. complete as directed.

Constructing a cooking platform 60 cm. width and 70 cm high resting on

B.B.Masonry walls 23 cm.thick in C.M.(1:6) with (ii) Fixing black kadappa

83 stone 30mm thick laid on precast R.C.C. (1:2:4) slab with plastering on 2.00 Rmt 2656.06

exposed faces of wall in C.M. (1:4) etc complete.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC / Metallic/Wooden box,

84 single mounting base frame covered with textured/metallic/white front 10.00 Pt 407.03

plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(c) with oval conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete. iii) Cat.: III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected

85 on PVC / Metallic/Wooden box, single mounting base frame covered with 2.00 Pt 595.90

textured/metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose / H.D.Connector as

(c) with oval conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete. iii) Cat.: III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden

box covered with appropriate front plate modules erected on / in wall /

86 ceiling as per pipe erected with following type of accessories. 1.00 Pt 431.27

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard / mcb db board.

(c) with oval conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete. iii) Cat.: III

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden

box covered with appropriate front plate modules erected on / in wall /

87 ceiling as per pipe erected with following type of accessories. 2.00 Pt 614.08

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb

(c) with oval conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete. iii) Cat.: III

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories. iii) Cat.: III

Supplying and erecting approved make of tube fitting with One no T-5

tube 24/ 28 W with Electronic ballast with each tube separately THD less

than 10 & built in adaptors, GI / PVC housing & mirror optic reflector,

89 suitable to work on 120V - 300V, A.C. supply with connector and adapter if 2.00 Ea 480.76

required. [Make of fitting & tube may be differ& fitting shall be providing

with tube]. ii) Cat.: III

Providing & erecting Approved make Ceiling Fan with double ball bearing

ISI mark with condenser A.C.230V 50c/s. 1400 mm. sweep complete,

90 canopy erected on existing hook or clamp with earthing [ Make shall be 2.00 Ea 1738.21

approved by Engineer in Charge]

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe

91 down rod erected duly painted for fan complete with proper insulation 0.60 Mtr 108.07

without leakage and earthing.

Replacing approved make fan regulator resistance type for Ceiling fan

{credit of D.M. retained by Agency.}

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt

to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

93 die cast powder coated and high U.V. & corrosion resistance with diffuser 2.00 Ea 535.30

with company mark/name 160V to 270V, Power Factor more than 0.95,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder

(iv) 16 to 20 watts

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

95 continuity of following size 30.00 Mtr 82.82

(B) With 16 swg HGS metal conduit pipe and accessories painted black.

(b) 2 wire 2.5 sq. mm

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark. iii) Cat.: III

Providing & erecting 240 V MCB double pole switch for lighting Load (B

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

97 box having following capacity 1.00 Ea 295.93

(B) 40 Amp. iii) Cat.: III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

98 appropriate nos. of MCBs.(The DBs should be used of same company of 1.00 Ea 867.59

MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (iv)12 way

Providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase 240 V,50Hz. having

99 characteristic of quick action & tripping with all advance feature & do not 1.00 Ea 2235.13

incorporate any electronic component. for following Max. rating erected

(ii) 40Amps. DP. iii) Cat.: III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (iv)12 way

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia of 12mm with

100 constant ohmic value surrounded by highly conductive compound with 1.00 Ea 4591.46

high charge dissipation suitable for following type of applications with

chamber and heavy duty cover.

Supplying & erecting earth pit of minimum bore dia.150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for following type of applications with

chamber and heavy duty cover.

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Providing and fixing educational information, learning charts, child-

friendly graphics, alphabet charts, number charts, village scenes, thematic

illustrations, photographs and other approved designs on wall surface

using printed flex material of approved quality and thickness, including

101 providing and fixing P.V.C. border patti around the flex sheet, necessary 8.00 Sq.m 353.50

adhesive material, cutting, alignment, fixing, finishing and all labour,

materials, transportation, tools & tackles and incidental charges complete

as directed by Engineer-in-Charge.

Providing and fixing educational information, learning charts, child-

friendly graphics, alphabet charts, number charts, village scenes, thematic

illustrations, photographs and other approved designs on

exterior/compound wall surfaces using weather-resistant and UV-

resistant digitally printed flex material of approved quality and thickness,

102 including providing and fixing P.V.C. border patti around the flex sheet, 16.00 Sq.m 404.00

necessary adhesive material, cutting, alignment, proper fixing, finishing

and all labour, materials, transportation, tools & tackles, scaffolding and

incidental charges complete as directed by Engineer-in-Charge.

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

Preparing and making Scribble Wall on wall surfaces using approved

green chalk paint finishing, which is suitable for writing and drawing. Cost

include surface preparation, cleaning and smoothening, application of

required primer or base coat when needed and finally applying the

103 approved green chalk paint for making a smooth, durable and uniform 3.60 Sq.m 505.00

writable surface. The above work will include finishing of border, labour,

materials, tools, scaffolding, transportations, etc., all included as per

directions by the Engineer-in-Charge.

Providing and fixing Fabric Finished Pin-Up Board of approved quality and

size with fabric covered soft board/cork board surface mounted on

suitable backing material and frame, including necessary base fittings,

104 screws, fixtures, supports and all accessories required for complete 2.40 Sq.m 2525.00

installation as per approved drawing and specifications. The rate shall

include all materials, labour, tools & tackles, transportation and incidental

charges complete as directed by Engineer-in-Charge.

Providing and supplying Educational Abacus of approved quality having

overall width of 0.30 m to 0.45 m with coloured movable beads mounted

on sturdy frame with multiple rods/wires suitable for teaching basic

arithmetic, counting and learning activities for children, manufactured

from child-safe non-toxic material with smooth edges and durable finish,

105 complete with all necessary accessories and fixing arrangements as per 1.00 Sq.m 1212.00

approved design and specifications, including transportation and

incidental charges complete as directed by Engineer-in-Charge.

Providing and fixing Child Height Measuring Scale / Growth Chart of

approved quality having measuring range of approximately 0.30 m to

m or as approved, made from durable printed P.V.C./sunboard or

equivalent market available material with clear graduation markings in

106 centimetres and child-friendly graphics, having smooth finished edges and 1.00 Sq.m 1010.00

complete with necessary fixing arrangements, screws, adhesive and

accessories including all materials, labour, transportation and incidental

charges complete as directed by Engineer-in-Charge."

Providing, supplying, installing, testing and commissioning LED Display

Screen of approved make/brand having minimum 32 inch screen size or as

approved, Full HD (1920 × 1080) resolution, LED display technology with

inbuilt speakers, HDMI and USB connectivity, wall mounting arrangement

with necessary brackets, power cable, remote control and all accessories

required for complete installation and proper functioning including

transportation, labour, testing and commissioning complete as directed by

Engineer-in-Charge.

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump

108 capacity 80 psi, mention with 40 psi inline type post carbon filter auto low 1.00 Each 8431.48

& high pressure switches with following size of storage tank & LPH

capacity & erected as directed

[A] 10 Ltr / Hr with 7 Ltr StorageTank

Twelve Lakh Forty Two Thousund Six Houndred Eight & Fifty Four Paisa Only

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

(A) Total Tendered Amount Rs. _________________________

(B) Rebate on Tendered Amount (if any) _______% (in Figures) Rs. _________________________

(C) Net Tendered Amount (A – B) Rs. _________________________

Construction of New Aganwadi Building at Chitravadi Village, Taluka: Nandod, Dist: Narmada. (Pkg-4)

BILL OF QUANTITIES

Item Description Quantities Unit Item Rates Amount

(* Please strike out whichever is not applicable).

1. All work shall be carried out as per public works Department Handbook and other specifications of Division or as

2. All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the

contractor under his signature.

3. Rates quoted include clearance of site (Prior commencement of work and as its close) in all respects and hold good for

work under all conditions, site, moisture, weather etc.

4. To be Continued on additional sheets, if found necessary.

5. 1.00 % of Construction cost shall be deducted form Bill. Amount of Contract as per the Building and other Construction

worker's welfare cess Act - 1996 (Labour & Employment Department Letter No. CWA - 2004 - 1831 - M (3). Dt. 9-12-05,

Notification of Labour & Employment Department Dtd. 03-01-05 and Labour & Employment Department letter No. CWA

6. Credit of dismantled materials of amount of Rs.2500 must be recovered from Contractor's first R.A Bill.

7. For abnormal high or law rates payment of such items shall be regulated as per Govt. circular No. PARACH / 102008 /

61 / S, Dt. 27/11/2008 attached with tender papers.

8 The contractor shall exhibit a board as per Government Circular No. Vernacular TNC/1090/24/S dated 05.03.2011 with

details specifications and details of works and amount involved at site at his own cost as directed by Engineer-in-

9 Testing of material shall be done as per statement attached with specification. The material should be tested in GERI or

Private laboratory approved by Govt. of Gujarat. Bill for testing charges should be paid by Executive Engineer and 1% of

Estimated cost computed after deducting the cost of materials to be supplied by the Govt. and shall be recovered from

the contractor's running bill as per Govt., R&B Department No. TNC-1085/(4)/C Dtd 20-12-91.

10 In all R.C.C. items in rate analysis, standard cement consumption has been taken as per Govt. GR. PRC- 10/ 2017/

Cement Consumption/ 16/ C/ Dt.11-5-2017 as stated in SOR therefore in RCC items where there is a change as per

actual mix design the cost of difference of cement consumption shall be deducted from the rate of original item at the

rate of input rate mentioned in the tender.

11 The Contractor is solely responsible to bare all applicable taxes i.e. GST etc. & department will not entertain any

contractor representation to reimburse any financial burden due to applicable taxes i.e. GST etc.

Dated Signature of Deputy Executive Engineer

the Contractor. Panchayat (R&B) Sub Division