MLA SDF 2024-25 IJK-LAC-CONSTRUCTION OF KAPPARA IRRIGATION PROJECT IN MURIYAD GP - PROVIDING MOTOR PUMP SET GENERAL ELECTRICAL WORK.

Amount

Electrical work

OD225553/2025-2026:Supply of 3 phase 20 H P hp, 15 KW, motor pumpset capable to discharge 46800Lts/Hr of clear water to a head of 26 mtrs, (Head range -14-50)suitable to work with 415V, 50Hz, AC supply. (KirloskerKDS 2050/equivlent Deccan -/ Texmo/

OD233213/2025-2026:Supply and providing 4'PVC fexible water pipe duro flex/canon flex as a suction pipe

OD235321/2025-2026:Supply and providing PVC foot valve complete with standard accessories suitable for 4*PVC fexible pipe.

OD235322/2025-2026:Supply and providing special make cast iron hose connector with clamp suitable for 4*PVC fexible pipe.

OD225545/2025-2026: Supply of Submersible pump controller with ammeter, volt meter, SSP for 3 phase 20 HP (relay range 20-33 submersible motor pump set. ( L&T MU-G20 FASD suitable for 20 HP ).

90.14.24.5:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor suitable for direct connection to motors.

1.17.30:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 6 sq. mm

OD235336/2025-2026:Supply and providing 80mm GI pipe heavy duty as a delivary pipe on the motor pump set

OD235379/2025-2026:Supply and providing 80mm GI Tee as a delivary pipe of the motor pump set.

OD235380/2025-2026:Supply and providing 80mm GI bend as a delivary pipe of the motor pump set.

18.11.4:Supplying, fixing, testing and commissioning of Butterfly Valve of PN 1.6 rating with bronze or gun metal seat duly ISI marked complete with nuts, bolts ,washers ,gaskets conforming to IS 13095 of following sizes as required:80 mm dia

OD225548/2025-2026:Supply and providing 16 mm size nylon marine rope (garwar/equivlent mkae) for hanging the pump set in well, tying with an out side object as required.

OD225558/2025-2026:Charges for the installation of above 20 hp 3 phase motor pump set on the existing foundation r connecting the delivery pipes, with accessories and lead cables to motor complete in trouble free operation and conducting trial run satisfactorly.

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

90.6.4.62:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.16.00 sq.mm 3 Run

90.6.4.63:Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.16.00 sq.mm 4 Run

90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm

90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame)

90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc.

90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet

OD232692/2025-2026:Providing and fixing following capacity TP&N Chang voer switch unit on the existing enclosure and fixing the same on wall , making connections, etc. as required.63A 4 pole COS

90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

OD225560/2025-2026:Supply and providing 0.5A to 2A SP MCB in the existing panel and giving connections as required

OD225551/2025-2026:Supply and fixing LED indicator, Blue colour, AC/CD 22.5mm cut out dia in the existing panel board and giving connection complete

OD225555/2025-2026:Supply and fixing LED indicator, red, green, black, yellow, orange colour, AC/CD 22.5mm cut out dia in the existing panel board and giving connection complete

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.4:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.4:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG)

OD225557/2025-2026:Supply and providing 25X3 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required.

OD225546/2025-2026:Supply and providing 25X6 mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes as required.

14.4:Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

14.11:Providing brick work (in width 225 mm or more) with F.P.S. bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) at all levels.

14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels

OD225554/2025-2026:Charges for preparation of application and test report for KSEB connection

SURESH K S (BID ID -2368377)

SRISAKTHI ELECTRICALS (BID ID -2369523)

Bidder Name

SRISAKTHI ELECTRICALS

UNNI K

SURESH K S