Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.3 Cr
EMD Value
₹4.6 L
Closing Date
12 Nov 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ADEN LINE
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less: where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a work contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
Defination of Similar Work :- Any Civil Engineering work
20 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
General Conditions of the Contract (GCC), 2022 is applicable to this contract.
Non-compliance with any of the conditions set forth therein above is liable to result in the tender being rejected.
It shall not be obligatory on the said authority to accept the lowest tender and no tenderer/tenderers shall demand any explanation for the cause of rejection of his/their tender.
If the tenderers deliberately gives/give wrong information in his/their tender or creates/create circumstances for the acceptance of his/their tender, the Railway reserves the right to reject such tender at any stage.
If the tenderer/s expires after the submission of his/their tender or after the acceptance of his tender, the Rly. shall deem such tender as cancelled. If a partner of a firm expires after the submission of their tender or after the acceptance of their tender, the Railway shall deem such tender as cancelled unless the firm retains its character.
Improvement to staff quarters in the section of Sr.DEN/Central/JU in Jodhpur Division.
170OF2026-27~NWR
170OF2026-27
Open
Works - General
12 Months
Jodhpur, Rajasthan
₹0
₹4.6 L
15 Oct 2026
15 Oct 2026
29 Oct 2026
88 items across 2 schedules · ₹3,27,69,034.4 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 5km | cum | 500 | 261.35 | 1,30,675 |
| 2 | All kinds of soil. | cum | 5 | 260.3 | 1,301.5 |
| 3 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 90 | 7,878.5 | 7,09,065 |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 110 | 7,294.7 | 8,02,417 |
| 5 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 130 | 6,812 | 8,85,560 |
| 6 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 20 | 9,105.95 | 1,82,119 |
| 7 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 90 | 7,311.25 | 6,58,012.5 |
| 8 | Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 40 | 10,741.6 | 4,29,664 |
| 9 | Square or rectangular pillars | cum | 40 | 1,060.5 | 42,420 |
| 10 | White sand stone | cum | 15 | 1,07,965.1 | 16,19,476.5 |
| 11 | Granite work | Metre | 180 | 510.95 | 91,971 |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 2200 | 1,267.95 | 27,89,490 |
| 13 | Sal wood | cum | 5 | 1,16,520.3 | 5,82,601.5 |
| 14 | 35 mm thick shutters | Sqm | 20 | 4,111.95 | 82,239 |
| 15 | Second class teak wood | Sqm | 20 | 3,323.2 | 66,464 |
| 16 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 50 | 3,473.85 | 1,73,692.5 |
| 17 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 40 | 2,172.1 | 86,884 |
| 18 | Second class teak wood | Sqm | 40 | 4,852.3 | 1,94,092 |
| 19 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 880 | 238.35 | 2,09,748 |
| 20 | With 12 mm mild steel U beading | Sqm | 10 | 939.2 | 9,392 |
| 21 | 250x16 mm | Each | 20 | 193.7 | 3,874 |
| 22 | 200x10 mm | Each | 20 | 69.4 | 1,388 |
| 23 | 125 mm | Each | 20 | 39.95 | 799 |
| 24 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre | 300 | 492.7 | 1,47,810 |
| 25 | 30 mm thick plain PVC door shutters | Sqm | 120 | 3,182.95 | 3,81,954 |
| 26 | With 2nd class teak wood beading 62X19 mm | Sqm | 10 | 1,597.15 | 15,971.5 |
| 27 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 6500 | 172.6 | 11,21,900 |
| 28 | Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides | Sqm | 240 | 844.7 | 2,02,728 |
| 29 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 4000 | 614.2 | 24,56,800 |
| 30 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 90 | 8,595.15 | 7,73,563.5 |
| 31 | 25 mm thick | Sqm | 1200 | 1,948.25 | 23,37,900 |
| 32 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. | Sqm | 50 | 2,354.7 | 1,17,735 |
| 33 | Size of Tile 600x600 mm | Sqm | 2200 | 1,553.45 | 34,17,590 |
| 34 | Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-charge. | Sqm | 1320 | 954.15 | 12,59,478 |
| 35 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 200 | 4,481.3 | 8,96,260 |
| 36 | In 75x75 mm deep chase | Metre | 800 | 305.15 | 2,44,120 |
| 37 | 110 mm diameter | Metre | 100 | 377.4 | 37,740 |
| 38 | 110 mm bend | Each | 50 | 150.35 | 7,517.5 |
| 39 | 110 mm Shoe | Each | 50 | 131.85 | 6,592.5 |
| 40 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). | Sqm | 1650 | 518.55 | 8,55,607.5 |
| 41 | 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. | Sqm | 120 | 396.65 | 47,598 |
| 42 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 2400 | 262.7 | 6,30,480 |
| 43 | Flush/ Ruled pointing | Sqm | 1200 | 385.4 | 4,62,480 |
| 44 | Flush/ Ruled pointing | Sqm | 1800 | 214.2 | 3,85,560 |
| 45 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 1200 | 176.25 | 2,11,500 |
| 46 | Old work (one or more coats) | Sqm | 3600 | 62.7 | 2,25,720 |
| 47 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete | Sqm | 5000 | 19.75 | 98,750 |
| 48 | One or more coats on old work | Sqm | 3000 | 102.8 | 3,08,400 |
| 49 | Re-lettering with black Japan paint of approved brand and manufacture. | per letter per cm height | 1200 | 3.85 | 4,620 |
| 50 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | Sqm | 7000 | 120.75 | 8,45,250 |
| 51 | With cement mortar 1:4 (1 cement : 4 fine sand) | Sqm | 60 | 547.4 | 32,844 |
| 52 | Door chowkhats | Each | 120 | 1,782.55 | 2,13,906 |
| 53 | Window chowkhats | Each | 30 | 1,125.15 | 33,754.5 |
| 54 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. | Sqm | 2400 | 72.45 | 1,73,880 |
| 55 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) | Litre | 30000 | 0.5 | 15,000 |
| 56 | Orissa pattern W.C Pan of size 580x440 mm | Each | 20 | 4,478.75 | 89,575 |
| 57 | 3 mm thick | Sqm | 1300 | 560.95 | 7,29,235 |
| 58 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 40 | 2,434.25 | 97,370 |
| 59 | In cement mortar | cum | 20 | 2,458.95 | 49,179 |
| 60 | Of area 3 sq. metres and below | Each | 20 | 367.2 | 7,344 |
| 61 | 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. | Sqm | 320 | 1,091.5 | 3,49,280 |
| 62 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 20 | 6,515.55 | 1,30,311 |
| 63 | 610x460 mm bowl depth 200 mm | Each | 30 | 3,873.8 | 1,16,214 |
| 64 | 10 litre capacity - White | Each | 20 | 1,190.65 | 23,813 |
| 65 | Rectangular shape 453x357 mm | Each | 30 | 1,361.8 | 40,854 |
| 66 | PN - 10 Pipe, 63 mm OD (SDR-11) | Metre | 300 | 597.75 | 1,79,325 |
| 67 | PN - 10 Pipe, 90 mm OD (SDR-11) | Metre | 320 | 975.3 | 3,12,096 |
| 68 | 15 mm nominal dia Pipes | Metre | 200 | 497.8 | 99,560 |
| 69 | 25 mm nominal dia Pipes | Metre | 200 | 627.25 | 1,25,450 |
| 70 | 32 mm nominal dia Pipes | Metre | 50 | 739.3 | 36,965 |
| 71 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 13360 | 11 | 1,46,960 |
| 72 | 15 mm nominal bore | Each | 30 | 798.95 | 23,968.5 |
| 73 | 15 mm nominal bore | Each | 20 | 670.45 | 13,409 |
| 74 | 15mm nominal bore | Each | 30 | 574.3 | 17,229 |
| 75 | 15 mm nominal bore, 105 mm long, weighing not less than 138 gms | Each | 30 | 182.1 | 5,463 |
| 76 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms | Each | 30 | 121.4 | 3,642 |
| 77 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 20 | 111.45 | 2,229 |
| 78 | 150 mm diameter | Metre | 240 | 695.8 | 1,66,992 |
| 79 | 150 mm diameter S.W. pipe | Metre | 240 | 1,179.85 | 2,83,164 |
| 80 | Circular shape 560 mm internal diameter | Each | 60 | 1,675.7 | 1,00,542 |
| 81 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 800 | 495.05 | 3,96,040 |
| 82 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 1000 | 598.6 | 5,98,600 |
| 83 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | Sqm | 40 | 1,139.3 | 45,572 |
| 84 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 30 | 1,176.8 | 35,304 |
| 85 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | Kg | 500 | 638.35 | 3,19,175 |
| 86 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | cum | 60 | 8,042.3 | 4,82,538 |
| Schedule total | ₹3,27,51,754 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
FinalSTDWorks12.2.20191.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.221.pdf
ATTACHMENT
CorrigendumintenderdocumentJU01052023.pdf
ATTACHMENT
AdvanceCorrectionSlipNo01to12.pdf
ATTACHMENT
AnnexureVofGCC.pdf
ATTACHMENT
SeekingclarificationonapplicabilityofGCCCorrectionSlipNo1024-06-2025.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .