15th Finance Commission Funds Grant

Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20 B(APSS 308) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plain Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Filling with Selected earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using Fly ash lime solid blocks of size -290 x 225 x 140 mm and having minimum crushing strength of 50 Kg/Sqcm and using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust for manufacturing of Fly ash lime solid blocks including cost and conveyance of all materials to site, including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete but excluding seignorage charges for finished item of work. (APSS No. 501 & 504). Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Columns Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Plinthbeams Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Roof beams Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)for Roof Slab 125mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)for Roof Slab 100mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. 12mm thick (average) mixing with water proofing compound from reputed manufacturers as approved by Engineer-in- charge at 1 Kg/bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of materials like cement, sand (screened), water proofing compound etc., to site and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete but excluding seigniorage charges for finished item of work (APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Lintels Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for For Sunshades 0.60 mts wide with 0.075m thick at fixed end and 0.050m thick at free end Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Cement Concrete (1:2:4) proportion nominal mix (Cement:Fine aggregate: Coarse aggregate) using 12mm size (SS5) graded machine crushed Hard granite metal (Coarse Aggregate) from approved quarry including cost & conveyance of all materials like cement, Fine aggregate(Sand), Coarse Aggregate, water etc. to site including seigniorage charges, sales and other taxes on all materials and all operational, incidental, labour charges such as centering, shuttering, machine mixing, laying concrete, curing etc., complete but excluding cost of steel & its fabrication charges, for Racks & Platforms, Sill Slabs for finished item of work. (APSS No. 402 & 03) for Pre casted slab on Septic Tank ,sills, Precast slabs for Almarias etc. Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Masonry for panel walls in superstructure with CM (1:8) prop: (cement : sand) using Fly ash lime solid blocks of size -290 x 200x 140 mm and having minimum crushing strength of 50 Kg/Sqcm and using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust for manufacturing of Fly ash lime solid blocks including cost and conveyance of all materials to site, including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete but excluding seignorage charges for finished item of work. (APSS No. 501 & 504).. Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Cement Concrete (1:5:10) for dummy columns proportion (cement: fine aggregate: Coarse aggregate) using 40mm size (SS5) hard granite metal (Coarse aggregate)from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, lift charges, curing etc., complete as per drawings but excluding cost of steel and its fabrication charges for finished item of work. (APSS No. 402 & 403) for dummy columns... Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plastering 12mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand (screened), water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete but excluding seigniorage charges for finished item of work (APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Ornamental Plastering to Ceiling 12mm thick in single coat in CM(1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Plastering 6mm thick in single coat in CM(1:4) for Cup board Racks including cost and conveyance of all materials like cement, sand (screened), water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete but excluding seigniorage charges for finished item of work (APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and fixing of Double shutter door fully panelled as per approved drawing with Medium teak wood frame of section 125x100 mm and teak wood shutters made with vertical rails,top & bottom horizontal rails of 125mm width and 38mm thick,lock rail 175mm width and 38mm thick,Intermediate horizontal rails of 125mm width and 38mm thick-2Nos, Panels 25mm thick including cost and conveyance to site of Medium teak wood frame, and shutters including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 6 Nos butt hinges 150mm long , 2 No. aldrop 300mm x 16 mm dia, 1 Nos tower bolts of 300 mm x 12 mm dia at top,2Nos tower bolts of 150 mm x 12 mm dia at bottom, 4 Nos. 150mm long handles, including fixing the fixtures to door with required number of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (Door of Size 1200mm x 2100mm) D1 Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and fixing of solid Wood Polymer Composite (WPC) single extruded Door Frame and door shutters 28-30 mm thick including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) Door size (D1) 0.9X2.1mts Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and fixing of Sal wood door of size 0.90x 2.10mt with frame made of well seasoned sal wood scantlings of size 75 x 100 mm made with vertical rails,top & bottom horizontal rails of 100mm width and 38mm thick,lock rail 175mm width and 38mm thick, Panels 38mm thick including cost and conveyance to site of Salwood frame, and shutters including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 6 Nos butt hinges 150mm long , 2 No. aldrop 300mm x 16 mm dia, 1 Nos tower bolts of 300 mm x 12 mm dia at top, 2Nos tower bolts of 150mm x 12mm dia, 4 Nos. 150mm long handles, including fixing the fixtures to door with required number of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (Door of Size 900m x 2100mm) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and fixing of PVC Door with frame of 40X46 mm having wall thickness of 2mm and door shutters made up of 200X200mm Rigid PVC extruded hollow section with 1+/-0.1mm wall thickness with tongue and groove locking arrandements and shutter s shall be horizantally reinforced with2no 8mm PVC rods with Al.fixures butt hinges 3 No's,, 100mm long Tower bolts - 2no's fancy handles 150mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) Door size 0.75X1.85mts Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multichamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm). Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and Fixing of MS Iron Grills including cost and conveyace of all materials and all labour charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing skirting to internal walls to 10.0 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and fixing jallies (cement concrete) of 25mm thick as per the design approved by the Engineer-in-Charge including cost and conveyance of materials to site and labour charges etc., complete for finished item of work in all floors. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Flooring with ceramic tiles of 7.3mm thick 1st quality of any shade, set over base coat of cement motar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work. APSS No. (701&707) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing dadooing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality of size approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Reinforced cement Concrete Roofing 125 mm thick with CC (M 20) using 20 mm graded metal and 2 courses of Terracotta Tiles at Top including pointing with Cement Mortar (1:3) including cost and conveyance of all materials and all labour charges etc.comp. ( Exluding cost of Reinforced cement Concrete Roofing 125 mm thick with CC (M 20) using 20 mm graded metal ) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

High Polished Granite 16 to 18 mm thick up to 2.43 M black Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with plastic emulsion paint of grade-1 standard make to exterior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) External walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with plastic emulsion paint of grade-1 standard make to exterior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) Internal walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint 1st grade of approved brand and shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc.complete (APSS No.1200, 1207 & 1211) in all floors Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting two coats with synthetic enamel paint first grade to primer coat on new Iron work using red oxide Iron primer paint grade - I including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (SS No. 1201, 1212 & 1207) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Electrical Arrangements

Supply and Fixing of 20mm dia 1.95 to 2.1mm thick P.V.C. pipe (ISI MARK) heavy grade concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Makes : Category I Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin/ Vasavi/ DEC Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and Fixing of 25mm dia 2.0 to 2.2mm thick P.V.C. pipe (ISI MARK) heavy grade concealed in roof slab with all required accessories including masonary work including all labour charges etc., complete.Makes : Category I Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin/ Vasavi/ DEC Including contract profit, overhead charges, But excluding GST and Seigniorage charges

TOTAL 38(THIRTY EIGHT ) ITEMS

Earth work excavation for foundations (Manual Means) of buildings in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work but excluding seigniorage, dewatering charges etc., as per SS 20 B(APSS 308) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plain Cement Concrete (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using 40mm size (SS5) hard,machine crushed granite metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Filling with Selected earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using Fly ash lime solid blocks of size -290 x 225 x 140 mm and having minimum crushing strength of 50 Kg/Sqcm and using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust for manufacturing of Fly ash lime solid blocks including cost and conveyance of all materials to site, including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete but excluding seignorage charges for finished item of work. (APSS No. 501 & 504). Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Columns Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Plinthbeams Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Roof beams Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)for Roof Slab 125mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)for Roof Slab 100mm thick Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. 12mm thick (average) mixing with water proofing compound from reputed manufacturers as approved by Engineer-in- charge at 1 Kg/bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cm x 45cm including cost and conveyance of materials like cement, sand (screened), water proofing compound etc., to site and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete but excluding seigniorage charges for finished item of work (APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for Lintels Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Vibrated Reinforced Cement Concrete M30 Design Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering, shuttering and scaffolding with props and steel plate as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) for For Sunshades 0.60 mts wide with 0.075m thick at fixed end and 0.050m thick at free end Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Cement Concrete (1:2:4) proportion nominal mix (Cement:Fine aggregate: Coarse aggregate) using 12mm size (SS5) graded machine crushed Hard granite metal (Coarse Aggregate) from approved quarry including cost & conveyance of all materials like cement, Fine aggregate(Sand), Coarse Aggregate, water etc. to site including seigniorage charges, sales and other taxes on all materials and all operational, incidental, labour charges such as centering, shuttering, machine mixing, laying concrete, curing etc., complete but excluding cost of steel & its fabrication charges, for Racks & Platforms, Sill Slabs for finished item of work. (APSS No. 402 & 03) for Pre casted slab on Septic Tank ,sills, Precast slabs for Almarias etc. Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Masonry for panel walls in superstructure with CM (1:8) prop: (cement : sand) using Fly ash lime solid blocks of size -290 x 200x 140 mm and having minimum crushing strength of 50 Kg/Sqcm and using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust for manufacturing of Fly ash lime solid blocks including cost and conveyance of all materials to site, including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete but excluding seignorage charges for finished item of work. (APSS No. 501 & 504).. Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Reinforced Cement Concrete (1:5:10) for dummy columns proportion (cement: fine aggregate: Coarse aggregate) using 40mm size (SS5) hard granite metal (Coarse aggregate)from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, lift charges, curing etc., complete as per drawings but excluding cost of steel and its fabrication charges for finished item of work. (APSS No. 402 & 403) for dummy columns... Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Plastering 12mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand (screened), water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete but excluding seigniorage charges for finished item of work (APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Ornamental Plastering to Ceiling 12mm thick in single coat in CM(1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Plastering 6mm thick in single coat in CM(1:4) for Cup board Racks including cost and conveyance of all materials like cement, sand (screened), water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete but excluding seigniorage charges for finished item of work (APSS No. 901 & 903) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and fixing of Double shutter door fully panelled as per approved drawing with Medium teak wood frame of section 125x100 mm and teak wood shutters made with vertical rails,top & bottom horizontal rails of 125mm width and 38mm thick,lock rail 175mm width and 38mm thick,Intermediate horizontal rails of 125mm width and 38mm thick-2Nos, Panels 25mm thick including cost and conveyance to site of Medium teak wood frame, and shutters including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 6 Nos butt hinges 150mm long , 2 No. aldrop 300mm x 16 mm dia, 1 Nos tower bolts of 300 mm x 12 mm dia at top,2Nos tower bolts of 150 mm x 12 mm dia at bottom, 4 Nos. 150mm long handles, including fixing the fixtures to door with required number of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (Door of Size 1200mm x 2100mm) D1 Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and fixing of solid Wood Polymer Composite (WPC) single extruded Door Frame and door shutters 28-30 mm thick including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) Door size (D1) 0.9X2.1mts Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and fixing of Sal wood door of size 0.90x 2.10mt with frame made of well seasoned sal wood scantlings of size 75 x 100 mm made with vertical rails,top & bottom horizontal rails of 100mm width and 38mm thick,lock rail 175mm width and 38mm thick, Panels 38mm thick including cost and conveyance to site of Salwood frame, and shutters including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 6 Nos butt hinges 150mm long , 2 No. aldrop 300mm x 16 mm dia, 1 Nos tower bolts of 300 mm x 12 mm dia at top, 2Nos tower bolts of 150mm x 12mm dia, 4 Nos. 150mm long handles, including fixing the fixtures to door with required number of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (Door of Size 900m x 2100mm) Including contract profit, overhead charges, But excluding GST and Seigniorage charges .

Supply and fixing of PVC Door with frame of 40X46 mm having wall thickness of 2mm and door shutters made up of 200X200mm Rigid PVC extruded hollow section with 1+/-0.1mm wall thickness with tongue and groove locking arrandements and shutter s shall be horizantally reinforced with2no 8mm PVC rods with Al.fixures butt hinges 3 No's,, 100mm long Tower bolts - 2no's fancy handles 150mm long 2no's, with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002) Door size 0.75X1.85mts Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multichamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm). Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and Fixing of MS Iron Grills including cost and conveyace of all materials and all labour charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing skirting to internal walls to 10.0 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and fixing jallies (cement concrete) of 25mm thick as per the design approved by the Engineer-in-Charge including cost and conveyance of materials to site and labour charges etc., complete for finished item of work in all floors. Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Flooring with ceramic tiles of 7.3mm thick 1st quality of any shade, set over base coat of cement motar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work. APSS No. (701&707) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Providing dadooing to walls with glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality of size approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., complete for finished item of work Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Reinforced cement Concrete Roofing 125 mm thick with CC (M 20) using 20 mm graded metal and 2 courses of Terracotta Tiles at Top including pointing with Cement Mortar (1:3) including cost and conveyance of all materials and all labour charges etc.comp. ( Exluding cost of Reinforced cement Concrete Roofing 125 mm thick with CC (M 20) using 20 mm graded metal ) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

High Polished Granite 16 to 18 mm thick up to 2.43 M black Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with plastic emulsion paint of grade-1 standard make to exterior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) External walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting with plastic emulsion paint of grade-1 standard make to exterior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) Internal walls Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of synthetic enamel paint 1st grade of approved brand and shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc.complete (APSS No.1200, 1207 & 1211) in all floors Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Painting two coats with synthetic enamel paint first grade to primer coat on new Iron work using red oxide Iron primer paint grade - I including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (SS No. 1201, 1212 & 1207) Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Electrical Arrangements

Supply and Fixing of 20mm dia 1.95 to 2.1mm thick P.V.C. pipe (ISI MARK) heavy grade concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Makes : Category I Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin/ Vasavi/ DEC Including contract profit, overhead charges, But excluding GST and Seigniorage charges

Supply and Fixing of 25mm dia 2.0 to 2.2mm thick P.V.C. pipe (ISI MARK) heavy grade concealed in roof slab with all required accessories including masonary work including all labour charges etc., complete.Makes : Category I Precision/ Universal & Marudhar/ VIP / GoldMedal / Million plast / GM / Sudhakar / Polycab/ Anchor/ Polyline/ Orbit/ AKG/ Beljin/ Vasavi/ DEC Including contract profit, overhead charges, But excluding GST and Seigniorage charges

TOTAL 38(THIRTY EIGHT ) ITEMS