Providing DWF through 100% FHTC's to Ammavaripalem habitation of Ammavaripalem GP in Podalakur Mandal of SPS Nellore District with an Est. Cost of Rs.43.60 Lakhs

Drilling of Bore well by down the hole hammer drilling to a fininshed dia of 165mm in all formations, such as medium hard rock formation to hard rock formation, all consolidated formation etc., and drilling in over burden to dia not less than 200mm etc. and reaming the borewell to suit insertion of suitable casing pipe etc., with couplings, caps any other relevant materials upto required depth as directed by the department including transportation of drilling rigs and supporting vehicle and inclulding bore development (Flushing of borewell at an everage pressure of 150PSI) conducting yeild test, consumables charges, crew charges required in fixation of pipe assembly comletely done to the satisfaction of the department and including all labour charges and all taxes, but excluding cost of casing pipe, couplings, caps etc. The entire work should be carried out as per IS-2800 Part I & II of 1979 and amended from time to time including over heads and contractors profit @ 13.615%

Manufacture, Supply & Delivery of 180mm dia 6Kg/cm2 PVC Casing Pipe ISI Make inclusive of transportations and excluding GST charges including over heads and contractor profit @ 13.615%

Supply and delivery of 180mm dia PVC End Cap of ISI make to utilize in the Borewell including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Labour charges for Slotter cutting to 180mm dia 6Kg/cm2 PVC Casing Pipe including all incidental charges etc.complete with over heads and contractor profit @ 13.615%

Survey and Investigation charges to Geologist for identifying sustainable source including vehicle hire charges for survey, Man mazdoor charges for helping during survey, fuel charges, crew charges and all other incidental charges etc.complete with over heads and contractor profit @ 13.615%

Supply and Transportation of 5.00HP, 5-10 Stage, 5 Star rated Borewell Submersible Pumpset confirming to IS:8034 and motor confirming to IS:9283 with water proof winding, Pump shall be sutiable for various delivery head and discharge with stainless steel shaft, Motor suitable for working on 415V + 10%, Three Phase 50Hz AC Supply etc.complete for 6" Borewell of ISI makes Kriloskar / Crompton / Texmo / CRI / KSB / Lubi / PSG / Aryen Varsha including over heads and contractors profit @ 13.615%

Fabrication, Transportation and Supply of Wall mounted Control Panel Board of size 600x600x250mm made of 18SWG CRCA Sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey Paint, Lock and Key arrangements two side levures with weld mesh inside etc.complete consisting of (a) 1No of Voltmeter - 0-500V (96x96mm size) of makes L&T/C&S/SALZAR/HPL/ AEI/Meco/Rishab, (b) 1 No of 0 to 20 Amps / 0 to 50 Amps Ammeter (96x96mm size) of makes L&T/C&S/SALZAR/ HPL/AEI/Meco/Rishab, (c) 1No of Single Phase preventor of suitable range of makes L&T/Minilec/ Powertec, (d) 1No of 32A TP, 10KA MCB Makes Legrand/Schneider, (e) 1 Set of Indication Lamps (R-Y-B) with Switch Control, (f) 2Nos of Voltmeter & Ammeter selector switch, (g) Supply and fixing of ISI Mark suitable capacitor of makes L&T/Siemens/Schneider/Epcos /Havells upto 7.50HP with DOL Starter of makes C&S. Crompton/L&T/Siemens/ BCH with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc.complete for 3Phase motor pump sets including over heads and contractors profit @ 13.615%

Supply and delivery of 50mm dia GI Medium B-Class Pipes of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia GI Heavy Couplings of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia GI Bends of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia DI Non-return Valve - PN 1.6 (MPa) of ISI Make confirming to IS-5312 with all accessories including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia MS Flangesets of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia MS Clampsets of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 7/16 Service wire of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and Transportation of 3Core 4.00Sqmm ISI marked Flat Cable wire of ISI for Submersible Motors confirming to IS: 694:1990 etc complete of Makes Torrent / Universal / Unicab / Havells / KEI /Polycab/Gloster/orbit /Paragon/RR Kabel/RPG with over heads and contractors profit @ 13.615%

Supply and delivery of 180mm dia PVC Bore Cover / Cap of ISI make to utilize in the Borewell including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Supply and delivery of 50mm dia GM Gate valve of ISI Make including cost and conveyance of all materials etc.complete with over heads and contractor profit @ 13.615%

Conveyance Charge of all materials to workspot including all charges and taxes etc.,

Installation & Errection of 3Phase/7.50HP Borewell Submersible Pumpset with all accessories in to the drilled borewell source including testing, commissioning and conducting trail run for a period of 15 days as directed by the Department including all labour charges etc.complete with over heads and contractors profit @ 13.615%

Earthwork excavation for structure as per drawing and Technical specifications clasue 305.1 including setting out, construction of shoring and bracing removal of stumps and other deleterious material and disposal upto a lead of 50mts dressing of sides and bottom and back filling in trenches with excavated suitable materials as per Technical specification 305 MORD/304 Morth for foundations with over heads and contractor profit @ 13.615%

Plain Cement concrete (1:4:8) nominal mix using 40mm HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc.to site, all operational, incidental charges and all labour charges such as mixing laying, curing concrete etc. for finished item of work for foundations & flooring wiht over heads and contractors profit @ 13.615%

Brick Masanory 230mm thick for panel walls in sub structure with CM(1:6) proportion using 2nd class country bricks of size 23x11x7cm from approved sources having crushing strength not less than 35Kg/sqm including cost & conveyance of all materials like cement, sand, bricks, water etc. to site, all operational incidental and labour charges such as mixing cement mortar, curing, scafolding charges, constructing masanory, lift charges, curing etc.for finished item of work for foundations and superstructure with over heads and contractors profit @ 13.615%

Sand Filling inside the basement with sand including cost of conveyance of all materials and all labour charges etc.complete with over heads and contractors profit @ 13.615%

Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials like cement, sand, water etc. to site, all operational, incidental and all labour charges such as mixing cement mortar, curing, scafolding charges, lift charges etc.complete with over heads and contractors profit @ 13.615%

Providing high yield strength deformed (HYSD) steel bars (Fe500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending to required sizes and shapes placing in position with cover blocks of approved size and binging wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost & conveyance of bars from approved sources, binding wire, cover blocks and all operational, incidental and labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work with over heads and contractors profit @ 13.615%

RCC M-20 nominal mix (cement:fine aggregate:coarse aggregate) corresponding to table 9 of IS 456 using 20mm size graded mechine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete, centring charges etc.complete but excluding cost of steel and its fabriaction charges for finished item of work for Roof Slab of 75mm thick with over heads and contractors profit @ 13.615%

Painting with 2 Coats of Snowcem paint of approved brand and shade including cost and conveyance of all materials, labour charges, incidental charges such as scaffolding & lift charges etc.complete for finished item of work with over heads and contractors profit @ 13.615%

Supply and Fixing of MS Welded Grill Gate of size 0.60x0.70mts including cost of conveyance of all materials, fabrication charges and all labour charges etc.complete with over heads and contractors profit @ 13.615%

Construction of Pipeline for water supply with HDPE (PE-100) grade pipes as per IS 4985-1988 with its amendments and revisions there on including supply of pipes, specials as per requirements, trench excavation for pipelines in all soils except rock required blasting by 2/3 machinery and 1/3 manually and depositing on bank with an initial lead and lift in all soils for pipeline trench of size 0.70x1.00 mts including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of 90mm dia HDPE 6Kg/Cm2 Pipe pipelines true to alignment and gradient and refilling trenches with excavated earth (other than rock soils) with watering and removing surplus earth from the site of work and filling pipeline with water and testing etc., complete, the rates inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work but excluding GST charges etc.complete with Over Heads & Contractors Profit @ 13.615%..

Earth work excavaton by manually in all soils for pipeline tranch of size 0.70x0.50 m lowering, laying and jointing of 90mm dia HDPE 6Kg/Cm2 Pipe pipelines with necessary jointing materials with testing the pipeline with standard water pressure and refilling the trench with excavated soils to the original surface level etc., to complete to send water away from OHSR, the rates inclusive of cost and conveyance of all materials and labour charges including turnover taxes for finished item of pipeline work but excluding CED etc., complete including Over Heads & Contractors Profit @ 13.615%. excluding HDPE Pipes Cost

Cutting open CC Road surface with concrete saw cutter including stacking of excavated materials for pipeline trench including all labour charges etc. with over heads and contractor profit @ 13.615%

VCC M-20 nominal mix using 20mm size HBG metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete, centring charges etc.complete but excluding cost of steel and its fabriaction charges for finished item of work for Laying of CC Road with over heads and contractors profit @ 13.615%

Supply & Delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with body & cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS:1865, IS:3896-2 with Food Grade Epoxy Powder Coating (EP-P) (Min:250 Micron) inside and outside of Color Blue RAL 5005. All internal parts such as Float, shell, Cover Bolts etc. made of Austenitic alloy steel of SS AISI 304/316 and DN 50 float of other compon ents with ABS/PTFE/ EPDM/NBR and generally confirming to DIN/BIS/AWWA Standards (or) combination Flange drilling as per IS-1538 including Supply of Air Valve, CI Pipes & Specials to suit the pressure class pipe as per requirement and Construction of RCC Valve chamber with RCC slab and RCC Manhole cover with locking arrangements etc.complete for finished item of work as specified in Technical Specifications (Part-B, Volume-I) but excluding GST and other taxes including cost and conveyance of all materials and all labour charges with Over heads and Contractor profit @ 13.615%

Construction of Pipeline for water supply with HDPE (PE-100) grade pipes as per IS 4985-1988 with its amendments and revisions there on including supply of pipes, specials as per requirements, trench excavation for pipelines in all soils except rock required blasting by 2/3 machinery and 1/3 manually and depositing on bank with an initial lead and lift in all soils for pipeline trench of size 0.70x1.00 mts including setting out, bracing, removal of stumps and other deleterious material and disposal upto a lead of 50M, dressing of sides and bottom, lowering, laying and jointing of 90mm dia HDPE 6Kg/Cm2 Pipe pipelines true to alignment and gradient and refilling trenches with excavated earth (other than rock soils) with watering and removing surplus earth from the site of work and filling pipeline with water and testing etc., complete, the rates inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work but excluding GST charges etc.complete with Over Heads & Contractors Profit @ 13.615%.

Earth work excavaton by manually in all soils for pipeline tranch of size 0.70x0.50 m lowering, laying and jointing of 90mm dia HDPE 6Kg/Cm2 Pipe pipelines with necessary jointing materials with testing the pipeline with standard water pressure and refilling the trench with excavated soils to the original surface level etc., to complete to send water away from OHSR, the rates inclusive of cost and conveyance of all materials and labour charges including turnover taxes for finished item of pipeline work but excluding CED etc., complete including Over Heads & Contractors Profit @ 13.615%. excluding HDPE Pipes Cost

Cutting open CC Road surface with concrete saw cutter including stacking of excavated materials for pipeline trench including all labour charges etc. with over heads and contractor profit @ 13.615%

VCC M-20 nominal mix using 20mm size HBG metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete, centring charges etc.complete but excluding cost of steel and its fabriaction charges for finished item of work for Laying of CC Road with over heads and contractors profit @ 13.615%

Supply & Delivery of "Resilient Seated Soft Sealing" Gate Valve (Sluice Valves) with body and bonnet of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS:1865, IS:3896-2 and Wedge fully Rubber lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O rung protection system on the shaft and seals of NBR. The Valve should be Vaccum tight and 100% leak proof with face to face dimensions as per BS:5163 Type A / IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns) - RAL 5005 with Pocket less straight through body passage confirming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties including Supply of Sluice Valve, CI Pipes & Specials as per requirement and Construction of RCC Valve chamber with RCC slab and RCC Manhole cover with locking arrangements etc.complete for finished item of work as specified in Technical Specifications (Part-B, Volume-I) but excluding GST and other taxes including cost and conveyance of all materials and all labour charges with Over heads and Contractor profit @ 13.615% for 80mm dia DI Sluice Valve on 90mm dia HDPE Line

Supply and fixing of House service connections using (PP Saddle) PP Clamp Saddles-PP Clamp contoured to fit around the pipe and shall be blue /black moulded in with Nickle plated Brass/SS 304 metal female threaded outlets, Thread dimension shall confirm to IS-554/ISO-7, cost and supply of tamper proof house hold Non return cum flow control valve (with all three parts made by using solid steel bars of SS 319), wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle (as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be WRAS approved as per BS:6920 for effect on water quality intended for human consumption. Compression fitting should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/IS 07 including supply and fixing of 20mm dia OD HDPE pipe 16.0Kg/Sqm to alength of 3.0mts and 15mm dia GI Pipe medium Grade properties and weight as per IS1239 ISI mark with necessay GI fittings and supply and fixing of 12.7mm dia Brass Bib cock long body Indian make heavy duty the cost shall include testing of all materials , labour all taxes (central and State) inspection charges, transportation up to site, transit insurance, loading uploading stacking and fixing etc., complete as specified and directed by the department engineer incharge excluding GST etc., complete, including contractor' profit & overheads @ 13.615%. (on 75mm dia HDPE Pipe)

Supply and fixing of House service connections using (PP Saddle) PP Clamp Saddles-PP Clamp contoured to fit around the pipe and shall be blue /black moulded in with Nickle plated Brass/SS 304 metal female threaded outlets, Thread dimension shall confirm to IS-554/ISO-7, cost and supply of tamper proof house hold Non return cum flow control valve (with all three parts made by using solid steel bars of SS 319), wth CNC machine make and of 15mm dia designed for 5 LPM discharge @ 0.50 bar pressure loss, not exceeding the flow of 7 LPM at 1 bar pressure and working on float principle (as per CPHEO manual), compression fittings (ISO:17885-2015, PN 16 rating and manufactured from virgin resin of PE-80/PE100 having blue colour. Raw material must be WRAS approved as per BS:6920 for effect on water quality intended for human consumption. Compression fitting should have moulded in SS 304/Nickel plated brass female threded outlet inserted to connection necessary fitting with threaded dimension conforming to IS 554/IS 07 including supply and fixing of 20mm dia OD HDPE pipe 16.0Kg/Sqm to alength of 3.0mts and 15mm dia GI Pipe medium Grade properties and weight as per IS1239 ISI mark with necessay GI fittings and supply and fixing of 12.7mm dia Brass Bib cock long body Indian make heavy duty the cost shall include testing of all materials , labour all taxes (central and State) inspection charges, transportation up to site, transit insurance, loading uploading stacking and fixing etc., complete as specified and directed by the department engineer incharge excluding GST etc., complete, including contractor' profit & overheads @ 13.615%. (on 90mm dia HDPE Pipe)

Construction of Circular 40,000Lts Capacity 12.90mts Staging, M30 Grade design mix and FE 500D Steel at the sited selected by the Department for VRCC Elevated Service Reservoir with VRCC Roof at having inside diameter of 5.00mts and 2.40mts Sidewall depth, the dead storage being 0.15mts, above bottom ring girder top with Single compartment and capable of holding 40,000 Lts and with standing a wind pressure of 185.21Kg per sqm. Rates shall be inclusive of 3 Coats of epoxy paint to inner surface of the reservoir including roof slab, 2 Coats of weather proof emulsion painting over primary coat for external surfaces, lettering, all required fixtures such as pipes, bends, valves etc. for pipe connections as per departmental designs and tentative drawings enclosed and the following fixtures are also inclusive and testing OHSR for water tightness as per standard proceedure. (1) The structure is VRCC M30 Grade Concrete (for all members), (2) 2 Coats of weather proof emulsion painting over primary coat for external surfaces, (3) Lettering as directed by the Department on front side of OHSR Container, (4) Fixing of Pipes, bends, valves etc. for pipe connections of Inlet, Outlet, Overflow & Scour connections including cost of pipes, bends, valves, jointing materials (5) RCC/Aluminium Ladder - 0.60mts wide inside reservoir, (6) RCC Spiral Staircase on outside reservoir as directed by the Department, (7) Ligtening arrestor including copper conductor and standard earthing as per APDSS, (8) Water level indicator with enobite/copper float of approved pattern - 1No, (9) RCC Phenial ventilator with copper or stainless steel fly proof mesh, (10) DI Manhole frame & cover of 0.60x0.60mts (Light duty) - 2Nos of ISI Make, (11) Hand Railing with 32mm dia 304 grade stainless steel pipe arround OHSR in RCC(1:2:4) to a height of 1.20Mts for RCC Spiral staircase, gallery along periphery on top of OHSR, (12) DI Swan neck ventilators shall be provided in top slab, i(13) Bed Blocks of 0.45x0.45x0.30mts in CC M15 Mix below all the Duck Foot Bends and the rates are inclusive of DI Verticals for all Inlet, Outlet, Overflow and Scour connections (as per Estimate diameters) and DI Valves, All valves near Out let and for Scour shall be DI Valves of heavy duty conforming to the specification including cost and conveyance of all materials, centring, curring and labour charges etc. complete for finished item of work but excluding GST Charges with Over heads and Contractors profit @ 13.615% asper drawings approved by the department.