Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.4 LAccepted-AOC INDEX NO E 72 HQ CWE HILLS VILL PO MEHUWALA MAPHI NEAR RAJKIYA INTER COLLEGE DEHRADUN UK | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC Being 1st lowest | |
| 2 | L2₹45.7 L+₹1.3 L (2.99%)Rejected-Finance 270 ADARSH NAGAR ROORKEE HARIDWAR 247667 | HARIDWAR | UTTARAKHAND | 247667 | L2 | Rejected-Finance Being 2nd lowest | |
| 3 | L3₹48.8 L+₹4.4 L (10.0%)Rejected-Finance 362 SUBHASH NAGAR PO CLEMENT TOWN DEHRADUN UTTARAKHAND | L3 | Rejected-Finance Being 3rd lowest | |
| 4 | L4₹50.3 L+₹5.9 L (13.3%)Rejected-Finance 26 NEW AVAS VIKAS COLONY DELHI ROAD SAHARANPUR UP | L4 | Rejected-Finance Being 4th lowest | |
| 5 | L5₹54.2 L+₹9.8 L (22.0%)Rejected-Finance | L5 | Rejected-Finance Being 5th lowest |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
28 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Clement Town
GE Clement Town MES Dehradun
REPAIR TO CERTAIN JCOs/ OR OTM AND MD ACCN OF ASC UNIT, FS SEC, GKAPPS UNDER AGE B/R-II AT GE CLEMENT TOWN, DEHRADUN
2023_MES_625671_1
GE /CLT / of 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Clement Town
Class D Cat a(i)
7 documents required · 7 mandatory
₹500
Yes
GE Clement Town
₹94,000
Yes
3 Jan 2024
30 Oct 2023
5 Dec 2023
30 Oct 2023
28 Nov 2023
13 Nov 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm as in riser of steps, skirting, dado and pillar etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles with and including over 10mm thick rendering in CM (1:4) complete all as specified and directed.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm (300x300mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed
M&L for glazed ceramic colour joint free tiles tiles in verticle surface 350x250x7/300x450x7mm thick set and jointed in neat cement slurry over 10 mm thick 1:4 cement mortar plaster and pointed in coloured cement to match.
M&L for Machine cut Kota stone slab flooring 16-18 mm thick, laid over & including screed bed of 20 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing complete, all as specified.
M&L for Kota stone slab 16-18 mm thick on vertical surfaces like riser of steps, skirting, dado and pillar laid over & including 10 mm thick in cement mortar (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.
M&L green marble 12-14 mm thick (table rubbed and polished ) in step, jambs, pillers , window cills, cooking plateforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe (where required) over 15mm thick screed bed in CM 1:6 complete all as specified and directed
S&F as in repair Bib taps (Half turn) cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down, suitable for 15 mm bore pipe,complete all as specified and directed.
S&F in repair 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified.
S&F as in repair concealed stop valve, cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified.
S & F as in repairs 15mm dia Stop valves fancy type, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified
S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including CI/MS brackets including cutting for and pinning in brackets but including waste pipe complete all as specified
S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked with PVC 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified.
S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.
S & F in repair 15mm dia brass CP sink mixer with swinging spout (wall mounted model) with connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and directed .
S & F in repair 15mm dia chromium plated central hole wash hand basin mixer without PWS with 450mm braided house hose screwed down high pressure screwed for iron pipe completed all as specified and directed .
S&F in repair double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed.
S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified.
S&F in repair 32 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed
M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path laid in panels at regular distance and finish the top surfaces even and smooth complete without using extra cement including filling the joints with mastic compound all as specified and directed
S&F galvanised iron sheet 1.2mm thick cut in circular shapes of size 450mm dia and bent to the shape of cover of PVC overhead tank with edges turned. Spikes made of 1.2mm thick GI sheet cut in triangular shape with sharp edge 100mmx25mm size bent and fixed to circular sheet with rivets at 75mm c/c spacing bothways. The sheet with spikes shall be fitted to overhead tank with 4 Nos nuts and bolts of size 10mm dia 50mm long complete all as specified and directed
Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie.
S&F MS work as in doors or gates, water staging, steel wire fabric, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and as directed by Engr-in-Charge
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified. as specified.
M&L for preparing new steel and iron surfaces of any description over 10 cm width /girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as directed
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed
M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
M&L for brick work except bricks with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed
Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed
S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified.
Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified
S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified.
S&F in repair stainless steel kitchen plate rack of over all size 780 x 600 x 250mm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed
Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed
M& L Solid (125mm X 63 mm Double rebate) factory made 100% solid WPC brown door frame made from 100% Lead free (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.
M& L Solid (100 mm X 63 mm single rebate) factory made 100% solid WPC brown door frame made from 100% Lead free (single extruded process) material with density 780 Kg / Cum & manufactured by an ISO:9001-2005 certified company, all as per specification drawings as directed by the Engr-in-Charge. the door frame should be water proof, termite proof, fire retardant and having excellent screw holding capacity complete all as specified and directed.
M& L 30 MM thick moulded plain WPC solid door shutter MOLDED WPC Brown factory made 100 % solid door (Confoming As per IS :4020) and 100% LEAD FREE single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600Kg/Cum. manufactured by an ISO:9001-2005 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.
S&F window/ventilator prepainted section of frame 72x55mm fixed to wall or concrete surface with rawl plugs made of galvanised steel and section of shutter 47x20mm, mulion section 72x50mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/Sqm) glazed and wire gauge shutter prepared to receive wiremesh to the shutter with total coated thickness of 0.6mm including grills/guard bars made made of 10mm square bars powder coated fixed to window frame with screws at 110mm c/c (Horizontal bars), 4 mm thick sheet glass, 0.36mm stainless steel wire cloth i.e. 1.4mm aperture and necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed.
S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and as directed.
S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified.
S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and directed.
S&F galvanised stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed
M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm both side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing complete all as specified and directed.
S&F 250mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 100mm size mild steel butt hinges medium weight ISI marked, cold rolled complete all as specified and directed.
S&F 200mm long barrel tower bolts, Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.
S&F 150mm size aluminium handles, cast type, anodised complete all as specified and directed
S&F in repair 20mm dia stainless steel drapery rod, fancy type with knobs and brackets, fixed in any length complete all as specified and directed
Dismantling Boarding any description fixed in any position with nails complete all as specified and directed.
S&F in repair 18 mm thick with min density 600 Kg/Cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides, top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed
S & F D-type cabinet handles premium quality, stainless steel 304 / gloss chrome / SN finished 150 mm long matt finished complete fixed in position complete all as specified and directed.
S&F 150mm Hasp and staple stainless steel, including bolt to hinge plate and fixed with screws all as specified and as directed
S&F auto closing hinges 35mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for cupboard/kitchen cabinet shutters complete in all respect and fixed in position all as specified
M&L for preparation of old surface on ceiling including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface even and smooth and applying one coat of white wash on old decorated surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old surface of wall including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface even and smooth and applying one coat of white wash on old decorated surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old surface of wall , kerb stone including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface even and smooth and applying one coat of cement base paint on old decorated surfaces complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old decorated distempered surfaces on internal walls including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and making the surface smooth by rubbing with sand paper and applying one coat of acrylic distemper (oil emulsion) using rollers of approved tint and make all as specified and directed by Engr-in-Charge.
M&L for preparation of old decorated surface of internal wall by removing existing treatment and applying two coats of acrylic distemper using roller over a layer of wall care putty to make the surface smooth all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge.
M&L for preparation of old decorated surface of exterior wall by removing existing treatment and applying two coats of exterior anti fungal acrylic emulsion paint (Apex) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.
Taking down cement plaster, in any thickness from brick or stone walls,/facia of roof Chajjas,roof projection,ceiling etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed.
M&L for Rendering 15 mm thick cement plaster on concrete,stone surfaces, brick walls/facia of roof Chajjas,roof projection in cement mortar 1:4 and finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for Rendering 15 mm thick on fair faces of brick work or concrete walls internal surfaces in CM 1:6 finished to even & fair without using extra cement complete all as specified and directed.
M&Lfor rendering 5 mm thick in CM 1:3 in ceiling / Chhajja's finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for preparation of old wooden surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint etc complete all as specified and directed.
M&L for preparation of newly plastered surface of external wall and applying two coat of cement base paint complete all as specified and as directed by Engr-in-Charge. Note :- The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge.The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.
M&L for white washing three coats on ceiling incl preparation of newly plastered surfaces. complete all as specified and directed by Engr In Charge. Note :- The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge.The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.
M&L for white washing three coats on wall incl preparation of newly plastered surfaces.complete all as specified and directed by Engr In Charge. Note :- The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge.The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.
M&L for preparation of newly plastered surface of internal wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge.
M&L for preapration of old plastered or unplastered surafces of walls, concrete tiles, kerb stone and the like and applying one coat of weather proof exterior emulsion paint complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description, not otherwise described and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed by Engr-in-Charge
M&L for brick work except bricks with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.
A.S. CONSTRUCTION COMPANY
KAPOOR ELECTRICALS
Nanda Brothers
SWASTIKA BUILDERS
RADHA ENTERPRISES
Jain Engineering Works
PIONEER REFRIGERATION AND ELECTRICALS
M/S Balaji Builders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .