Activities under Corporate Environment Responsibility for the Project Construction of Additional Floors of ISA Building at IPO Complex, Sector-14, Dwa

Bill of Quantity

S.No Description Unit Rate Quantity DSR Amount NS Amount

1 Supply of trees:

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm.

in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Nauclea cadamba (Kadam) of height 150-165

cm. in big poly bag of size 25 cm as per direction of the officer-in-charge

Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm

in big polybag of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165

cm. in earthen pots of size 25 cm as per direction of the officer-in-charge

Providing and stacking of Eugenia jambolana (Jamun) of height 150-165

cm. in big poly bags of size 25 cm as per direction of the officer-in-charge

Providing and stacking of Mimusops elengi (Maulsri) of height 150-165 cm.

in big poly bag of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Ficus infectoria (Pilkhan) of height 150-165 cm.

in big polybag of size 25 cm as per direction of the officer-in-charge.

h 7.78 Providing and stacking of Pterospermum acerifolium (Kanak Champa) ofheight 150-165 cm. in big Each 65.00 20.00 1,300.00

poly bags of size 25 cm as per direction of theofficer-in-charge.

Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm.

in big poly bags of size 25 cm as per direction of the officer-in-charge.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of

unserveiceable material’s as per direction of officer in charge (excluding

cast of plant & water)

Half brick circular tree guard in bricks, internal diameter 1.25 metre and

height 1.2 metre above ground and 0.20 m below ground, bottom two courses

laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine

3 2.15 sand) and the intermediate courses being in dry honey comb masonry as Each 1,626.45 180.00 2,92,761.00

per design complete:

2.15.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 5.0

Complete maintenance of trees (Out side garden features), jobs like making

of basin at regular interval i/c watering, weeding, pruning & application of

fertilizer etc, (excluding the cost of material which shall be supplied by the

4 2.42 department and other T & P material/articles shall be provided by the 76.00 540.00 41,040.00

contractor) and as per direction of officer in charge

Trees for 250 no/(up to 4 & up to 3 year Slow & Fast

Digitally signed by ARTI

GUPTA 14:58:22 IST

Tender For activities under Corporate Environment Responsibility for the Project "Construction of Additional Floors of ISA Building at IPO Complex,

Sector-14, Dwarka,New Delhi

Bill of Quantity

S.No Description Unit Rate Quantity DSR Amount NS Amount

Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant

conforming to MNRE specifications as amended, consisting of Mono/Poly Crystalline silicon solar

cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of

suitable strength with following components complete as required:-

a) Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS

14286/IEC 61215, IS/IEC 61730-Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion

efficiency shall not be less than 16.5%. PV modules used in solar power plants/ systems must be

warranted for their output peak watt capacity, which should not be less than 90% at the end of 10

years and 80% at the end of 25 years.

b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase,

5 1 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC Power with efficiency not less than kWp 61,060.00 30.00 18,31,800.00

97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree

C. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage Frequency.

c) Data Monitoring System complete with accessories.

d) Fixing of Array junction box & Main junction box with IP 65 protection and termination

arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as

e) Lightning and surge voltage protection.

Connections & Interconnections by supplying & fixing required size XLPE insulated copper

conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable

to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other

accessories etc. as required.

Providing, fixing, installatoin, testing and commissioning of Stainless Steel Water Cooler of 40 Litre

Capacity of brand as approved by Engineer In Charge. The Rate includes the cost for Providing and

fixing of MS Steel casing for the same, and associated electricals works and plumbing works.

7 TOILET WORKS

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in :

Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

9 6.4.1 superstructure above plinth level up to floor V level in all shapes and sizes in : Cum 8,288.35 43.80 3,63,029.73

Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering

10 4.1.8 and shuttering - All work upto plinth level Cum 6,326.05 15.00 94,890.75

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Tender For activities under Corporate Environment Responsibility for the Project "Construction of Additional Floors of ISA Building at IPO Complex,

Sector-14, Dwarka,New Delhi

Bill of Quantity

S.No Description Unit Rate Quantity DSR Amount NS Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering

11 4.1.3 and shuttering - All work upto plinth level Cum 7,365.15 30.00 2,20,954.50

1:2:4 ( 1Cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete upto plinth level

Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

13 5.22A.6 binding all complete above plinth level Kg 89.65 5,000.00 4,48,250.00

Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados,

over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the

15 11.37 manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Sqm 935.60 100.00 93,560.00

Ivory, Grey, Fume Red Brown laid on 20mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand)

including pointing the joints with white cement and matching pigments etc. complete

20mm cement plaster of mix

1:4 (1 cement : 4 fine sand)

Extra for providing and mixing water proofing material in cement plaster work in proportion Per 50kg

recommended by the manufacturers. Cement

12 mm cement plaster of mix:

1:4 (1 cement : 4 fine sand)

6mm cement plaster of mix

1:3 (1 cement : 3 fine sand)

Providing and applying plaster of paris putty 2mm thickness over plastered surface to prepare the

surface even and smooth complete

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

New work (Two or more coats applied @ 1.43 ltr/10 sqm. over and including base coat of water

proofing cement paint applied @ 2.20 kg/10 sqm).

Tender For activities under Corporate Environment Responsibility for the Project "Construction of Additional Floors of ISA Building at IPO Complex,

Sector-14, Dwarka,New Delhi

Bill of Quantity

S.No Description Unit Rate Quantity DSR Amount NS Amount

Distempering with 1st quality acrylic distemper ,having VOC (Volatile Organic Compound)content

less than 50grams/litre ,of approved brand and manufacture ,including applying additional coats

wherever required, to achieve even shade and colour.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with

water proofing cement compound consisting of applying: a) after surface preparation, first layer of

slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b)

laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre

23 22.6 cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement Sqm 585.55 150.00 87,832.50

@ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @

1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The

entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.

d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the

purpose of measurement the entire treated surface will be measured.

24 22.14.1 Grading Roof for Waterproofing Treatment with: Cum 7,510.75 15.00 1,12,661.25

Cement Concrete1:2:4 ( 1Cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)

Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (1 cement : 3 fine

sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of

cement mortar 1:3 (1 cement : 3 fine sand) and finished neat: With common burnt clay F.P.S. (non

modular) brick tiles of class designation 10

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European

type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber

buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over

flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design

26 17.68.1 complete, including painting of fittings and brackets, cutting and making good the walls and floors Each 10,326.65 4.00 41,306.60

wherever required:

White vitreous china dual purpose WC pan with white

solid plastic seat and lid with white vitreous china flushing

cistern and C.P. flush bend.

Providing and fixing white vitreous china pedestal type one piece water closet (European type)Hind

ware SYDNY cat.no.92508 with seat and lid, low level white vitreous china dual flushing cistern 3/6

litres & C.P. flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with

27 17.2.1 specials of standard make and mosquito proof coupling of approved municipal design complete Each 5,540.55 4.00 22,162.20

including painting of fittings and brackets, cutting and making good the walls and floors wherever

W.C. Pan with ISI marked white with slow falling solid plastic seat and lid.

Tender For activities under Corporate Environment Responsibility for the Project "Construction of Additional Floors of ISA Building at IPO Complex,

Sector-14, Dwarka,New Delhi

Bill of Quantity

S.No Description Unit Rate Quantity DSR Amount NS Amount

Providing and fixing white glazed vitreous china wash basins with C.P. pillar tap, C.P. brass waste

28 17.7.2 32mm C.P. bottle trap and unions and sealing of joints between wash basins and counter slabs around Each 2,965.60 4.00 11,862.40

the wash basins with Silicone rubber cement of approved make of matching colour all complete

including cutting and making good the walls and floors where required.

White Vitreous China Wash Basin size 630mm x 450mm with a single 15mm C.P. Brass Pillar Tap

Providing and fixing PVC Waste Pipe for sink or wash basin including PVC Waste fittings complete

Providing and Fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality)

30 17.31 complete with 6mm thick hard board ground fixed to wooden cleats with CP Brass Screws and Each 1,411.15 4.00 5,644.60

washers complete

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot

and cold water supply including all CPVC plain & brass threaded fittings I/c fixing the pipe with

clamps at 1.00m spacing. This includes jointing of pipes and fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same including testing of joints complete

as per direction of Engineer in Charge.

25mm nominal outer dia. Pipes

Providing and placing on terrace (at all floor level) polyethylene water storage tank ISI :12701 marked

with cover and suitable locking arragement and making necessary holes for inlet ,outlet and overflow

pipes but without fitting and the base support of tank

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592

Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal

(i) Single socketed pipes

110 mm diameter

Excavating trenches of required width for pipes, cables, etc., including excavation for sockets and

dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil and

then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each

34 2.10.1.2 deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within Meter 417.35 100.00 41,735.00

a lead of 50m :

All kind of soils

Pipes, cable etc. exceeding 80mm dia. but not exceeding 300mm dia.

Tender For activities under Corporate Environment Responsibility for the Project "Construction of Additional Floors of ISA Building at IPO Complex,

Sector-14, Dwarka,New Delhi

Bill of Quantity

S.No Description Unit Rate Quantity DSR Amount NS Amount

Providing and laying non-pressure NP-2 class (light duty) RCC Pipes with collars jointed with stiff

mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

250mm dia RCC pipe

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate

40mm nominal size) all-round S.W pipes including bed concrete as per standard design.

250mm diameter RCC.Pipe

Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand), R.C.C. top slab

with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal

size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand:

37 19.7.1.1. 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete Each 11,687.00 5.00 58,435.00

as per standard design

Inside size 90cm x 80cm and 45cm deep including C.I. cover with frame (light duty) 455 x 610mm

internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.

and weight of frame 15 kg.) :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top

in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete

1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making

necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20mm nominal size) finished with a floating coat of neat cement all complete as per standard design :

0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal

diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg., fixed in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

including centering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at

the external surface shall be paid for separately) :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for Circular Type Manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m

With burnt clay F.P.S. (non modular) bricks of class designation 7.5

Tender For activities under Corporate Environment Responsibility for the Project "Construction of Additional Floors of ISA Building at IPO Complex,

Sector-14, Dwarka,New Delhi

Bill of Quantity

S.No Description Unit Rate Quantity DSR Amount NS Amount

Constructing brick masonry circular type manhole 1.22m internal dia at bottom and 0.56m dia at top

in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete

1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making

necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20mm nominal size) finished with a floating coat of neat cement all complete as per standard design :

1.68 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal

diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg., fixed in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

including centering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at

the external surface shall be paid for separately) :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for Circular Type Manhole 1.22m internal dia (at bottom) beyond 1.68m to 2.29m

With burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular type manhole 1.52m internal dia at bottom and 0.56m dia at top

in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement

mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete

1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making

necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20mm nominal size) finished with a floating coat of neat cement all complete as per standard design :

2.30 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal

diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg., fixed in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

including centering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at

the external surface shall be paid for separately) :

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for Circular Type Manhole 1.52m internal dia (at bottom) beyond 2.3m

With burnt clay F.P.S. (non modular) bricks of class designation 7.5

Tender For activities under Corporate Environment Responsibility for the Project "Construction of Additional Floors of ISA Building at IPO Complex,

Sector-14, Dwarka,New Delhi

Bill of Quantity

S.No Description Unit Rate Quantity DSR Amount NS Amount

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS :

10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25

mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space

between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary

44 19.16 and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to Each 487.10 50.00 24,355.00

with stand the bend test and chemical resistance test as per specifications and having manufacture's

permanent identification mark to be visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20

mm nominal size) complete as per design

Making connection of drain or sewer line with existing manhole including breaking into and making

good the walls, floors with cementconcrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3

coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain

etc. complete :

For pipes 100 to 250 mm diameter

Providing and Fixing CP Brass long nose bib cock of approved quality conforming to IS Standards

46 18.50.1 and weighing not less than 810 gm Each 715.05 10.00 7,150.50

15mm Nominal Bore

Providing and fixing CP Brass Angle Valve for basin mixer and geyser points of approved quality

15mm Nominal Bore

Providing and Fixing PTMP Pillar Cock of approved quality and colour

15nn Nominal Bore 107mm long weighing not less than 110gms

Providing and Fixing PTMP Grating of approved quality and colour

49 18.58.2 Rectangular Type with Openable Circular Lid Each 169.70 10.00 1,697.00

150 Nominal Size square 100mm diameter of the inner hinges round grating

Providing and fixing soil, waste and vent pipes

Centrifulgally cast (spun) iron socket and spigot (S&S) pipe as per IS 3989

Providing and fixing M.S. holder-bat clamps of approved design to sand cast iron/cast iron (spun)

pipe embedded in and including cement concrete blocks 10x 10 x 10 cm of 1:2:4 mix (1 cement : 2

51 17.37.1 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and Each 308.45 25.00 7,711.25

making good the walls, etc.

For 100 mm dia. Pipe

Tender For activities under Corporate Environment Responsibility for the Project "Construction of Additional Floors of ISA Building at IPO Complex,

Sector-14, Dwarka,New Delhi

Bill of Quantity

S.No Description Unit Rate Quantity DSR Amount NS Amount

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick,

bolts and nuts complete.

Sand cast iron S&S as per IS - 3989

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or

without vent arm complete, including cost of cutting and making good the walls and floors:

100mm inlet and 100mm outlet

Sand cast iron S&S as per IS : 3989

Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC

Rate taken from DSR

56 conduit, with modular switch, modular plate, suitable GI box Point 555.00 8.00 4,440.00

2018 Item No 1.55.3

and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the

Rate taken from DSR following sizes of FRLS PVC insulated copper conductor, single

2018 Item No 1.7.5 core cable in surface/ recessed steel conduit as required.

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Installation of exhaust fan in the existing opening, including

Rate taken from DSR making good the damage, connection, testing, commissioning

2018 Item No 1.50.1 etc. as required.

Upto 450 mm sweep

Rate taken from DSR Extra for fixing the louvers/ shutters complete with frame for a

2018 Item No 1.51 exhaust fan of all sizes

Installation, testing and commissioning of pre-wired,

fluorescent fitting / compact fluorescent fitting of all types,

Rate taken from DSR complete with all accessories and tube/lamp etc. directly on

2018 Item No 1.41 ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable and earthing etc.

61 NS Suppy of Exhaust Fan of 450mm sweep Each 5,973.15 4.00 23,892.60

Tender For activities under Corporate Environment Responsibility for the Project "Construction of Additional Floors of ISA Building at IPO Complex,

Sector-14, Dwarka,New Delhi

Bill of Quantity

S.No Description Unit Rate Quantity DSR Amount NS Amount

62 NS Supply of 20W LEDTubelight Each 327.03 8.00 2,616.24

Supplying and fixing following way, single pole and neutral,

sheet steel, MCB distribution board, 240 V, on surface/ recess,

Rate taken from DSR complete with tinned copper bus bar, neutral bus bar, earth

2018 Item No 2.3.2 bar, din bar, interconnections, powder painted including

earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

64 NS Supply, Installation, Testing and Commissioning of Single Pole 16A MCB Each 192.74 6.00 1,156.44

65 NS Supply, Installation, Testing and Commissioning of Double Pole 63A MCB Each 845.58 1.00 845.58

Supplying and Fixing following size/modules GI Box with modular base and cover plate for modular

Rate taken from DSR

66 switches in recess etc. as required. Each 267.00 3.00 801.00

2018 Item No 1.27.2

Wiring for light/power plug with 2x4 sq.mm FRLS PVC insulated, copper conductor, single core

Rate taken from DSR

67 cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 Sq.mm FRLS PVC insulated Meter 200.00 50.00 10,000.00

2018 Item No 1.12

copper conductor single core cable for loop earthing as required.

Providing and Fixing 1mm thick M.S Sheet Door with frame of 40x40x6 mm angle iron and 3mm

MS. Gusset Plates at the junctions and corners all necessary fittings complete, including applying a

priming coat of approved steel primer.

Using M.S Angle 40x40x6 mm for Diagonal Braces

Providing and Fixing T-Iron Frames for Doors, Windows and Ventilators of mild steel Tee-Sections,

joints Mitred and welded including fixing of necessary butt hinges and screws and applying a priming

69 10.13.1 coat of approved steel primer . Kg 114.65 100.00 11,465.00

Fixing with 15x3 lugs10 cm long embedded in cement concrete block 15x10x10cm of CC 1:3:6 (1

Cement : 3 Coarse Sand: 6 Graded Stone Aggregate 20mm nominal size)

Providing and Fixing Glass Panes with Putty and glazing clips in steel doors, windows, clerestory

windows all complete with :5.5mm thick glass panes

Providing and Fixing angle iron frames for doors, windows and ventilators of mild steel Angle

Sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5mm or 35x5 mm flat

71 10.31 pieces to the existing T-Iron Frame or to the wall with dash fastner , including fixing of necessary butt Kg 103.70 100.00 10,370.00

hinges and screws and applying a priming coat of approved steel primer, all complete as per the

Direction of Engineer In Charge

Painting with Synthetic Enamel Paint of approved brand and manufacture to give an even shade:

Two or more coats on new work