Construction of a Chamber (Interior Partition Wall) for the Financial Advisor on the 5th Floor of the Office of the Environment Department, Government of West Bengal, at Prani Sampad Bhawan, Animal Resource Development Department (ARDD)

WORKS

Taking out existing partition/ceiling of particle board, masonite board, ply board, soft board etc. of any thickness and refixing same in new position with necessary clamps making holes in walls, floor, roof and mending damages if any.

Dressed wood work in post, plate, battens etc. fitted & fixed complete (excluding the cost of bolts only, but including the cost of nails, screws etc.) (The quantum should be corrected up to three decimals) Sal : Malayasian

Supplying, fitting, and fixing boiling water-resistant ply conforming to IS: 303, Inside the Chamber, Thickness - 9 mm

Supplying fitting, fixing decorative lamination conforming to IS: 2046: 1995 as per approved make, brand, finish, and thickness with fitting, fixing the same on Particle/MDF Glossy/Matt/Suede excluding surface texture or metallic lustre.(i) Thickness of laminate 1mm

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987, 8mm thick coloured / tinted / smoke glass.

Supply of Mazdoor (Male) for shifting of office materials, furniture, etc. Labour required for shifting of existing office materials and furniture, and for the cleaning of the working area, complete as directed.

Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in (A) 35MM THICK SHUTTER

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(e) Sal : Malayasian

Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: i) 75 x 63 x 3.2mm.

Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. (a) Heavy type (I.S.I. size 3)

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (i) 75mm long x 10mm dia. bolt.

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (i) 250mm x 16mm dia bolt.

i) Door stopper (Anodised aluminium)

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete With continuous plate base (Hexagonal/ Round rod) (i) 100 mm grip x 10 mm dia rod.

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.

Supplying, fitting fixing I.S.I. approved quality and brand hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge

Priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary

Supply & Fixing Green LED SQUARE TYPE LIGHT FITTING ON FALSE CEILING WHICH SUSPENDED 25CM below the ceiling with suitable size all accessories and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20mm (1.5sqmm) flexible copper wire of 1.10mt. length FullGlow is a beautifully designed luminaire which is bound to delight the occupants with refreshing and comfortable experience through its pure form and glare- free light (Make: Philips / Wipro/ Crompton)

Suppling ,fitting and fixing in position vertical blinds made with 100 mm wide laminated fabric (MAC , pentagob or equivalent assembled on top aluminum frame (35 mm x 28 mm x 1.2 mm) powdwe coated with light quality nylon runners with upto clatch mechanic stainless steel master runners stiller chair and PVC end cover the bottom and fabric are suspended with a high which are to be connected by kink chair as per direction of the Engineer-in-charge complete in all respect.

MID BACK CHAIR : Supplying and placing in position a medium back 360° revolving office chair of modern style with matte finish, made of full black mesh, overall size 640 mm (L) × 670 mm (D) × 1100 mm (H). The chair shall have a seat size of 500 × 500 mm with height adjustment from 440 mm to 540 mm, and a backrest size of 480 mm × 570 mm with overall back height from floor adjustable between 1000 mm and 1100 mm. The seat shall be constructed using 12 mm thick hot-pressed BWR plywood (IS:303) with 40 ± 2 mm polyurethane foam cushioning of density 32 ± 3 kg/m³. The ergonomically curved backrest shall be of injection-moulded frame with mesh, provided with adjustable lumbar and height support. The chair shall have height-adjustable armrests (up & down), a self-weighted multi-locking mechanism, and a 100 mm telescopic hydraulic gas lift. The base shall be a 650 mm chrome prong base with 620 mm pitch centre diameter and 660 mm diameter including castors. The OEM/bidder shall be NABCB certified, holding ISO 9001:2008/2015, ISO 14001:2015 and OHSAS 18001:2007 certifications, along with GreenPro, Indian Design Mark, AIOTA, FSC and PEFC certifications, and must be a BIFMA member, with at least one OEM product BIFMA LEVEL compliant, supported by an official link or screenshot from [www.bifma.org]

VISITOR CHAIR : Supplying and placing in position a fixed multi-purpose fabric office chair (Focus/CN/A type) in blue colour with matte finish and contemporary style, suitable for office seating. The overall size of the chair shall be 609 mm (L) × 495 mm (D) × 1143 mm (H). The chair shall be upholstered in full fabric. It shall be provided with two-way height-adjustable PU-padded armrests (up & down). The seat and back shall be made of 12 mm thick hot-pressed plywood. The seat shall have 40 ± 2 mm thick polyurethane foam of 32 ± 3 kg/m³ density for superior comfort, and the backrest shall also be provided with 40 ± 2 mm thick polyurethane foam of 32 ± 3 kg/m³ density, designed with symmetrical lumbar support. The seat size shall be 480 mm (L) × 500 mm (D) with seat height of 480 mm. The chair shall be supported on a MS powder-coated tubular cantilever-type frame. The Seller / OEM / Manufacturer shall be NABCB certified and hold ISO 9001:2008, ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007 certifications, along with GreenPro, Indian Design Mark, AIOTA, FSC and PEFC certifications. The bidder must also be a member of BIFMA, and one or more OEM products shall be BIFMA LEVEL compliant, supported by an official link or screenshot from [www.bifma.org]

Please Enable Macros to View BoQ information