Tender for prov. SOP to JSV at Raghunath ka Padhar by prov.11KV HT line ,250 KVA, 11/0.4 KV S/Stn, 3phase LT line and HT Metering Equipment in ES Bijni under ESD HPSEBL No III Mandi . Phase III Bari near STP at Raghunath Ka Padhar AMRUT 2.0

(Supply Part) - 250 KVA 11/0.4KV Sub-Station

250 KVA 11/0.4KV DISTRIBUTION TRANSFORMER

S/T POLE 9.00 MTR.W/L 200KG

RCC MUFF

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line

MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LA's

X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed

X-Arm [Channel Iron (100x50x6 mm), Length : (460 mm) x 2 Nos for supporting Main Channel of Transformer]

MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos

MS Angle Iron (35X35x6 mm), Length : (460 ) x 2 Nos

MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing

MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos

MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos

GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm

GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type

D.O Fuse Unit

Surge Arrester, 9 kV Station Class (Porcelain Type)

Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.)

Stay set complete (i/c Stay Clamps)

Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set)

Pipe Earthing Set and

6 SWG GI wire For Earthing

LT DISTRIBUTION PANEL BOX WITH MCCB 250 KVA

Half Clamp (M.S. Flat 50X6 mm)

Full Clamps (M.S. Flat 50X6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Aluminium Thimble

Copper Thimble 200 Amp

Danger Plate

Barbed Wire

L.T. CABLE 3.5 CORE 240 MM2

L.T. CABLE 3.5 CORE 185 MM2

ENERGY METER 3-P, 4-WIRE 400 A CT TYPE

ALUMINUM PAINT

Red oxide

Transportaion charges

(Supply Part) - 11KV HT line

ACSR 6/1/3.35 (50mm²) {Includes 3 conductor lengths for 3Φ and Additional 1% (Sag, Jumpering and wastage}

Steel Tubular Poles (9 m, Working Load > 227 kgf/m²) (with Ruling Span 90 m, 8 No. Run thro' and 3 No. Double Pole Dead End Structures)

Muffs (2000mm) with concerete filling

Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/c tolerance of 100 mm either side) x 8 structure

Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures

Pole Top Bracket [MSCI:100x50x6 mm- 100 mm]

Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm x 2 No.

X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No.

X-Arm (Horizontal) - MS Channel Iron C type: 100X50x6, Length: 2340 mm x 2 No.] ∆ Formation

Discs insulator sets on Dead End structures (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps, Straight stapples & Bend Stapples etc.) x (3 No. conductors) x (2 No. sides)

11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 3 No per double pole structure

Stay set complete in all respect (i/c Stay Clamp) (1No. / Single Pole , 4 No. / Double Pole Structures)

Stay Wire (7/3.15 mm) (10.0 kg Per Stay Set)

HT Earthing set complete

Single Continous Earth wire (GI, 8 SWG) {alongwith 2 wire lengths for avg. one road crossing @ 20 m and Additional 3% (Sag, Earthing, Cross lacing above road wastage and for connecting with earth coil))} @ 0.102 kg/m

Eye Hook for earth wire

Earth Reel

Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro' structure: 2 No ]

Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro' structure: 2 No]

Danger Plate (250X200X1.6 mm)

Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)]

Barbed Wire

Red Oxide

Aluminium Paint

GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm

GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type

D.O Fuse Unit

Fault Path Indicator 7kV - 69kV Clipon Type

Transportation charges

(Supply Part) - LT Line

ST Pole 9mtr. Long

Rcc muff

LT Cable 3.5 X 185 mm² XLPE Cable

Egg insulator

Full clamp

Half clamp

GI wire 8SWG

MSCI X-Arms 100x50x6 length=600mm

L T Stay set Complete

Stay Wire 7/3.15mm @ 7.0 kg per stay set

Nuts & Bolts off sizes @ 25 Kg/Km

Aluminum paint for steel pole @ 1 Ltr.p/pole

Transportation charges

(Supply Part) - CT-PT Metering

CT-PT Combined Unit [PT:11 kV/110 V) ; CT:50/5A]

3-phase, 3/4-Wire CT-PT operated Static Trivector Meter (DLMS Compliant)

PVC Multistrand 4 mm² copper wire with Φ-1 inch GI pipe for concealing & bend joint/elbow

X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm

X-Arm [Channel Iron (100x50x6 mm), Length : 460 mm x 2 Nos for supporting Main Channel of CT-PT Unit]

MS Angle Iron (50X50x6 mm), Length : 2800 mm x 4 Nos

MS Angle Iron (35X35x5 mm), Length : 460 mm x 2 Nos

Half Clamp (M.S. Flat 50X6 mm)

Full Clamps (M.S. Flat 50X6 mm)

Nuts and Bolts of Various Sizes

Aluminium Thimble

Copper tinned Thimble

Danger Plate

Barbed Wire

Red Oxide

Aluminium Paint.

Transportation charges

Erection part of 250KVA DTR

Erection of 250 Kva,11/0.4KV Transformer completed in all respect.

(Erection Part ) - 11KV HT line

Erection Of Single pole Sturcture Complete in all respect

Erection Of Double pole Sturcture Complete in all respect

Erection Of Earthing set Complete in all respect

Erection Of GO Switch Complete in all respect

Erection Of DO fuse Unit Complete in all respect

Erection Of AAAC/ACSR 50mm2 Complete in all respect

Erection Of GI wire Complete in all respect

Erection Of Stay set Complete in all respect

Erection Fault Path Indicator 7kV - 69kV Clipon Type Complete in all respect

Manual carrige Road head to site of work avg lead=0.500 km(0.5X0.50=0.25)

(Erection Part ) - LT line

Erection of XLPE Cable Complete in all respect

Erection of ST pole Complete in all respect

Erection of Stay set Complete in all respect

Manual carrige from road head to site of work avg lead. 0.300 km

(Erection Part ) - CT-PT Combined Unit

Erection of CT-PT Combined Unit [PT:11 kV/110 V) ; CT:10-400/5A] Complete in all respect

Construction of Chain Link Fencing

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand): 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Construction of Chain Link Fencing

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement: 2 coarse sand) : 3 graded stone aggregate 20 mm nominal size)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12 mm

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Supplying, filling, spreading & leveling gravels of approved size in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge.

Centering and shuttering including strutting, propping etc. and removal of form for:Retaining walls, return walls, walls (anythickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

Please Enable Macros to View BoQ information