Provaiding Deep Bore and 10HP Submersible 200 feet Deapth at TIDCO Apartmnets Kotturu 1st ward RamachandrapuramMunicipality- Municipal General Funds

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for Insertion Of 110s 40/160/180/200mm PVC Pipe / 17S/20Omm PVC Blue casing pipe) by Rotary drilllng rig in all formations suitable for Rotary drilling such as alluvium. Loamy. clayey. sandy, burried channels. highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft. medium rock. all formations typical and suitable for rotary drilling etc.

Supply, Delivery & fixing of 200mm Dia PVC Blue casing pipe RN3 complete .etc., complete as per SS asnd as directed by the departmental officer in charge of the work

Slotting charges for 175mm Dia PVC Blue casing pipe complete .etc., complete as per SS asnd as directed by the departmental officer in charge of the work.

Manufacture, Supply, delivery & fixing of Cast iron bail plug heavy duty to suit casing pipe including transportation, Loading,unloading charges.conveyance charges stacked at site labour charges etc Complete as per SS & as directed by the Departmental Officer in-charge of the Work

Manufacture.Supply. delivery & fixing of clamp set with bolts and nuts washers heavy duty to suit the delivery pipe including transportation. Loading .unloading charges.conveyance charges stacked at site labour charges etc Complete as per SS & as directed by the Departmental Officer in-charge of the Work.

Manufacutre, Supply, delivery & fixing of 200 mm dia PVC Bore Cap per 1No including transportation, Loading,unloading charges.conveyance charges stacked at site labour charges etc Complete as per SS & as directed by the Departmental Officer in-charge of the Work

Supply and Transportation of ……10HP 20,24….,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.

Fabrication transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated. painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc.. complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells. a) Voltmeter: 0-500 V 96x96mm size. Makes: L&T/C&S / SALZAR/HPL/AEI/Meco / Rishab INo b) 10 to 20 Amps/050 Amps Ammeter (96x96mm size). Makes: L&T / C&S / SALZAR / HPL/AEI / Meco / Rishab-1No. c) Single phase preventor of suitable range Makes: L&T / Minilec / Powertec.-1No. d) TP, 10KA MCB. Makes: Legrand / Schneider/1No e) Indication lamps (R-Y-B) with switch control 1set f) Voltmeter & Ammeter selector switch - 2 Nos g) Supply and delivery of ISI Mark capacitor Makes: L&T/Siemens / Schneider / Epcos.

Supply of 3 Core of 6.0 sqmm ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990. Makes: As per list of recommended brands as category I

Supply of 3 core 4.0 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR kabel / Havells/KEI/Polycab/Gloster/Goldmedal/GM CSSR S.No 31 . MAT-02774

Supply & delivery of SS nipples to suit 90 mm HDPE including cost and conveyance and transportation charges as directed by the Departmental Officer in-charge of the Work

Manufacture, Supply, & Delivery of 90mm 10 KSC HDPE Pipe Dia including transportation to anywhere in A.P. (10.00 kg/Sqcm) complete as per Standaard Spcifications and as directed by the Departmental Officer in-charge of the Work

Erection inside bore well submersible motor and pump errection charges as directed by the Departmental Officer in-charge of the Work

Supply Installation Testing and commissioning of self-healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR. including making connections with suitable capacity conductors/cables testing as required. Makes: As per list of recommended brands.

Supply of ……...ISI marked WPSC (Weatherproof Single Core) ISI Aluminum Wire. Makes: As per list of recommended brands.

Supply of …... Porcelain Rewireable Fuse Units. Makes: As per list of recommended brands.

Supplying, erecting & terminating flat flexible PVC insulated cable 4core 1.0 sq. mm copper conductor used for railing cables complete erected with PVC/wooden fastening arrangement & lugs, on wall / trunking as per specification including dismantling of existing accessories as applicable

Supply of……ISI marked neutral Links 63Amps Makes: As per list of recommended brands as category I

Supply and making with heavy copper lugs (pin/ ring type) as per IS specification, duly crimped with crimping tool, PVC tape etc., of following size Makes: As per list of recommended brands.

Supply and transportation of following XLPE insulated, 1100V grade armoured aluminum cable as per specification confirming to IS:7098 (Part - I)./1554-I. Makes: As per list of recommended brands as category II.

laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work. Makes: As per list of recommended brands

Supply &Fixing of wiring tape for Insulation applied over the wiring to prevent shocks As per list of recommended brands

Supply &Fixing of 90mm Dia MS Clamp with bolts and nuts washer As per list of recommended brands.

Supply &Fixing of 90mm Dia G.I Bend heavy duty As per list of recommended brands.

Supply &Fixing of 90mm Dia G.I heavy duty socket As per list of recommended brands.

Providing Deep Bore and 10HP Submersible 200 feet depth at tidco Apartment in Kotturu