Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.4 LAccepted-Finance | ₹2.4 L | 1 | Accepted-Finance Lowest Bidder. |
| 2 | 2₹2.4 L+₹1,100 (0.46%)Rejected-Finance | ₹2.4 L+₹1,100 (0.46%) | 2 | Rejected-Finance Second Lowest Bidder. |
| 3 | 3₹2.5 L+₹6,900 (2.88%)Rejected-Finance | ₹2.5 L+₹6,900 (2.88%) | 3 | Rejected-Finance Third Lowest Bidder. |
| Sl No | Description | Qty | Unit | MODERN ELECTRICALS L3 | SAIBAL SARKAR L2 | SAMPA ELECTRICALS L1 |
|---|---|---|---|---|---|---|
| 1.00 | Supply & Installation of LED Luminous Board, Designing, Febrication, Supply, Installation, Testing & Commissioning of Outdoor LED Signage in English/Bengali(letters given and approved by the concerned authority) for letters with following specifications-
(a) The box for the signage will be fabricated in Aluminum Square tube of size 25mm x 25mm of 16 gauge frame complete with necessary priming and painting. The box will be covered with 3 mm thick Aluminium Composite Panel (ACP) sheets of the entire board. The Complete installation will be water, vermin and dust insulated and protected.
(b) Letter Description Approx 9" x 5" size of letters (Approx) made of Acirylic Sheet with male female attachment, on router cut ACP Sheet of approved from the EIC.
(c) LED Illumination: High Bright, High Wave length closed type water proof white LED modules (0.72 W or Higher) mounted on interior side of female part of letter with power wire running back to a central power area with 12 Volt LED Power Transformer to adequately drive the whole LED modulers without Flicker, burning Hour-70000h.
(d) Internal Electrical Wiring will be done by Helogen Free Flame Retardent HRFR compound insulated (unsheathed) 1.5 sqmm copper flaxible cable through interior conduit and electrical race way.
(e)Erection the above sign board with three nos. 40 x 40x 6mm MS angle iron support rigidly grouted on suitable maffing which are making on the ground to avoid the uprooting by wind pressors and painting as per direction of EIC (Approximate size 14' length x 4 ' height x 6" dept....2nos. ) | 100 | Per Sqft | 2,407 ₹2,40,700 | 2,370 ₹2,37,000 | 2,349 ₹2,34,900 Lowest |
| 2.00 | Scaffolding charges with bamboo structure to fixing the above board & grouting the MS Angle in the break wall with mending goods with cement, sand etc lifting the board from ground by 2" dia fiber roof and fixing the board above the main entrance gate. | 1 | No | 6,000 ₹6,000 | 3,900 ₹3,900 Lowest | 4,900 ₹4,900 |
Tender Value
Refer Docs
EMD Value
₹4,798
Closing Date
12 Jun 2026, 12:00 pmClosed
Assistant Engineer, PESD-II, PWD
O/o the AE/PESD-II/PWD Ranchi Road Purulia 723101
SITC of LED Luminous Board in front of the Gate of Govt. ITI Purulia at Raghunathpur in the district of Purulia.
2026_WBPWD_5014385_1
WBPWD/AE/PESD-II/eNIQ-01/26-27
Open Tender
ELECTRICAL WORKS ORG
Item Rate
15 days
Purulia
Please refer tender documents.
4 documents required · 4 mandatory
₹4,798
27 Jul 2026
22 May 2026
15 Jun 2026
1 Jun 2026
12 Jun 2026
1 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply & Installation of LED Luminous Board, Designing, Febrication, Supply, Installation, Testing & Commissioning of Outdoor LED Signage in English/Bengali(letters given and approved by the concerned authority) for letters with following specifications-
(a) The box for the signage will be fabricated in Aluminum Square tube of size 25mm x 25mm of 16 gauge frame complete with necessary priming and painting. The box will be covered with 3 mm thick Aluminium Composite Panel (ACP) sheets of the entire board. The Complete installation will be water, vermin and dust insulated and protected.
(b) Letter Description Approx 9" x 5" size of letters (Approx) made of Acirylic Sheet with male female attachment, on router cut ACP Sheet of approved from the EIC.
(c) LED Illumination: High Bright, High Wave length closed type water proof white LED modules (0.72 W or Higher) mounted on interior side of female part of letter with power wire running back to a central power area with 12 Volt LED Power Transformer to adequately drive the whole LED modulers without Flicker, burning Hour-70000h.
(d) Internal Electrical Wiring will be done by Helogen Free Flame Retardent HRFR compound insulated (unsheathed) 1.5 sqmm copper flaxible cable through interior conduit and electrical race way.
(e)Erection the above sign board with three nos. 40 x 40x 6mm MS angle iron support rigidly grouted on suitable maffing which are making on the ground to avoid the uprooting by wind pressors and painting as per direction of EIC (Approximate size 14' length x 4 ' height x 6" dept....2nos. ) | 100 | Per Sqft | - | - |
| 2 | Scaffolding charges with bamboo structure to fixing the above board & grouting the MS Angle in the break wall with mending goods with cement, sand etc lifting the board from ground by 2" dia fiber roof and fixing the board above the main entrance gate. | 1 | No | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.63 MB
2911.pdf
Tender Documents • 0.41 MB
BOQ_5082463.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .