CIVIL WORK

Amount

1) Work of providing barbed wire fencing on boundary wall of SLDC Complex, BBMB, Chandigarh. 2) Work of replacing of existing PVC flooring in control room/corridor/server room situated at SLDC Complex, BBMB, Chandigarh and of control rooms situated at 66KV, S/S, Chandigarh and at 220KV S/S, BBMB, Dhulkote.

Providing and laying resilient vinyl sheet floor covering 2 mm thick, having a vinyl plastic wear layer with backing intended for use in light commercial and residential buildings, duly fixed to the base floor using adhesive as approved by the manufacturer. Pb-CSR-Ref.-14.99-T/R.

Providing and fixing concertina coil fencing with punched Tape concertina coil 600 mm dia. 10 meters open able length (total length 90m) having 50 nos. rounds per 6.00 meters length up to 3.00 meters height of wall with existing angle iron Y-shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, situated with G.I. staples & G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete, as per the directions of EIC with reinforced barbed tape (RBT)/spring core (2.5mm thick) wire of high tensile strength of 165 Kg/sq.mm with tape (0.52mm thick) and weight 43.478 gm/meter. (NS Item).

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position. (c) Tees angles & channels. Pb-CSR-Ref.-18.1(c)-T/R.

Applying priming coat with metal primer on new steel or iron work including preparation of surface. Pb-CSR-Ref.-16.20-T/R.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. Pb-CSR-Ref.-16.17-T/R.

Welding by gas or by electric plant, including carriage to and from workshop etc. Pb-CSR-Ref.-18.28-T/R.

Drilling holes in girders. Pb-CSR-Ref.-26.2

Cement concrete 1:2:4 (a) With stone ballast or shingle. (i) mixing by manual means. Pb-CSR-Ref.-10.13 (a)(i)-T/R.

Extra over item No. 10.1 to 10.13 when work is done in situ in small quantities not exceeding 0.30 cum per block in situ such as staggered blocks, arrows, concrete block over inverted filters, bed plates arches etc. Pb-CSR-Ref.-10.14-T/R.

Dismantling brick work tile, masonry or tile lining. (b) In cement. Pb-CSR-Ref.-8.5(b)-L/R.

BHARTI ENTERPRISES

RAJIV