SPECIAL REPAIRS TO BLDG NO 515 GKEPTA HUT AT AHMEDABAD CANTT

Amount

Taking down chowkhats or frames exc 1.5 sq.m and n. exc 4sqm each with shutter (without taking off shutter from the frame) and remove from site all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F 30 mm thick flush door shutter solid core construction with block board core and laminated 0ver plywood face Decorated type on both side complete all as specified and directed.

Dismantling wall and ceiling boards any thickness including cover fillets complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Vitrified ceramic tiles 10mm thick (square/rectangular) dark shed /double charged / ultra charged area of each tile exceeding 0.42 sqm but npt exc 1.00 sqm , in floors etc. incl screed bed 15 mm in CM 1:6 set and jointed in neat cement slurry. 3 mm thick PVC spacer shall be used for uniformity of joints , joint gap shall be filled with Epoxy mortar with pigment as per manufacturers instruction.

Ditto all as per item No 08 above but on vertical surfaces such as skirtings, dados and risers to steps etc incl rendering 10mm thick on of brick work or concrete surfaces in cement mortar 1:4 complete

M&L for premium quality exterior grade ceramic tiles / brick tile coloured , on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified

M&L for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile 0.06 sqm but not exceeding 0.11 sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. complete all as specified and directed.

M & L for 18-20 mm thick granite (Telephonic black / Red) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:3).

Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.

S&F 100 chromium plated decorative type Extruded brass handles, fabricated type polished complete.

S & F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet and fixing at site on PVC frame complete all as specified and directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

S&F 150 mm chromium plated decorative type Extruded brass handles, fabricated type polished complete.

S& F brass Mortice lock, vertical type, size 100 mm having 4 lever specified for flush door of premium quality.

S&F 150 mm chromium plated decorative type Extruded brass tower bolt , fabricated type polished complete

S&F Aluminum body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed.

S & F aluminium anodised partition wall in panels with aluminium frame and partitions of rectangular section of size 101 x 44 x 1.48mm thick fixed in position with 4.8mm thick plain glass/ 12mm thick prelaminated particle board exterior grade all fixed with 0.70mm thick glazing beading and rubber gaskit including fixing on wall and floor with suitable size of steel chromium plated screw with rowl plug complete all as specified and directed

S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified and as directed.

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 5 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc complete all as specified and directed.

S&F anodised Aluminium door frame of size 100 x 44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98 mm thick, botom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 X 44mm X 1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stoppers, tower bolt 200 mm, sliding door bolt 300 mm or mortice lock, with 5mm thick tinted glass / preleminated particle board (Novapan) panel and making good of wall surface to match existing surface.

Taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc.

M&L for rendering on fair faces of brick work in two layers i.e., 10 mm thick in CM 1:6 and top layer of 5 mm thick in CM 1:4 mixed with water proofing compound in top layer @3% by the weight of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement.

M&L 10mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface.

M&L newly plastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface .

Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall putty to wall surface.

M&L complete removal of existing treatment of ceiling and applying two coats white washing complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Taking up or down GI tubing 15 mm bore pipe and connection including cleaning for refixing or removal from site as directed

Supplying and laying of 20 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches, fixing on walls/ceiling or laying in floors complete all as specified

M&L for preparation of new/old steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer .

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6

M&L for 25 mm thick PCC type B-0 (1:2:4) using 12.5 mm aggreage as in floor finished even and rough to received top layer or tiling complete all as specified.

M & L 75mm thick plain cement concrete type D-2 1:4:8 (40 mm graded stone aggregate) as in sub base complete all as specified and directed.

S & F 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) incl connecting up pipes securing access covers etc as specified and as directed

S&F in repair brass CP shower rose 125 mm size with or without swivel joint and fixing to steel pipe

S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. .

S & F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms)

S&F in repairs Bib taps (long body )fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected.

S & F in repair 15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

Supply only pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white with integral foot rest complete incl provision of lime concrete bedding.

S&F 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and directed.

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed

S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed.

S&F for 25 mm SS curtain rod witj fixing bracket and knobs fixed in repairs.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats ,door frame gate or similar works. Fe410-W (Gde-E-250) quality A

Preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified.

Dismantling asbestos cement (corrugated or semi corrugated, etc)sheets in roof covering complete all as specified.

S & F prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws complete all as specified and directed.(Note : Corrugation colour and shape of sheet shall be approved by GE)

S & F prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws including neoprene and EPDM washers complete all as specified and directed.

S & F uniral with fixing accessories size 355 x 340 x 535 mm all as spd & directed.

S&F designer false ceiling made of 12 mm thick gypsum board of Saint gobin or equvivalent over and including all GI grid of standard quality to hold false ceiling including two coats interior emusion of any colour over one coat of primer and two coats of acrylic putty complete all as directed and specified.

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest)/Asbestos Cement white fiber Board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction.

M&L for heavy duty tiles (endura ) 10 to 12 mm thick on horizontal surfaces,set, jointed and pointed in neat cement slurry in floors incl 15mm thick screed bed CM 1:6.

S&F in repairs fancy type Bib taps 15mm bore CP with wall flange , screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repairs, sink mixer for mixing hot & cold water screwed down for iron pipe & fixed 15mm bore of pipe of Jaquar make of catalog no.

S&F in repairs, 2 way bib cock , fixed in 15mm bore pipe complete all as directed and specified.

S&F in repairs, for wash basin mixer, for mixing hot & cold water screwed down for iron pipe & fixed 15mm bore of pipe of Jaquar make of catalog no. QQT-7167B or equivalent company.

S&F in repairs, Wall mixer double lever arm kit of Hi -flow Divertor consisting of operating lever wall falnge with seals and button only . mixing hot & cold water screwed down for iron pipe & fixed 15mm bore of pipe complete all as directed and specified.

S&F in repairs angular stop cock with wall flange complete all as directed and specified.

S&F in repairs, wash down water colset (wall hung type ) with seat cover of jaquar florentine or equivalent , jaquar catalog no. ONS-WHT-10955P18UFSM (inlusive of brackets), to pedestal pan including all joints, trapete.

S & F in repairs flushing cistern slim concealed cistern body with drain pipe connection site for wall hung WC and flushing control plate catalog no. JCP-CHR-852415 with all accessories complete all as directed and specified.

S&F in repairs vitreous china counter TOP wash basin, white, of size 425X425X145 mm excluding taps, brass coupling 32mm, bottle trap of 32mm size with 300mm long complete all as directed and specified.

S&F in repair designer looking mirror of size 1350mmX900mm fixing on wall with brass fixing knob complete all as directed and specified.

S&F in repair single towel rail of 600mm long of jaquar make catalog no .AHS-CHR1581 or equivalent complete all as directed and specified.

S&F in repair soap dish of jaquar make catalog no. AQN-CHR-7731 or equivalent complete all as directed and specified.

S&F in repair health faucet spray type, complete all as directed and specified.

S&F in repair over head shower with shower arm 140mm dia . Round shape single flow with air effect shower. ( ABS Body & Face Plate Chrome Plated) complete all as directed and specified.

Supply & fix in repair toilet paper holder type complete all as directed and specified.

Supply & fix in repair glass shelve type complete all as directed and specified.

S&F in repairs 18 mm (+ 0.7 mm) thick, solid PVC sheet one side prelam sheet for cupboard shutter of density 600 Kg/Cbm bent 900 and finish at all edges at level for making egdes at level for making edge lipping/bending or 0.5 mm thick PVC sheet lipping at 4 edges using bonding tape etc complete all as per direction of complete all as directed and specified.

S & F MS Auto hinges of crank 0 degree & 90 degree, fixed with screws to timber frame complete all as specified and as directed.

S & F in repairs chromium plated soap dish complete all as specified.

S&F in repair CP towel rail complete all as specified and directed

S&F Rectangular shaped urinal partition with frosted glass Glass 08 mm size height 900 mm width 450 mm chrome finish complete all as directed and specified.

S&F glass door made of 12 mm thick toughened glass with all fixing arrange ments ,including hydraulic type floor door closer ,SS handles locking arrangments ,complete all as specified and directed .

S&F Sliding shower enclosers having one side fixed and one sliding door size H-2000 mm, W-1500-1800 mm complete with assesories complete all as directed and specified.

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

Point wiring with 1100 volts grade PVC insulated FRLS-H multistranded copper conductor cable 1.5 sqmm (Phase - R-Y-B, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal modular boxes with mounting frame and front plate for mounting modular switches, sockets, fan regulators complete for the following :-

(a) One light point controlled by one switch.

(b) One Ceiling/Ex/Venti fan point controlled by one switch.

(c) One light point controlled by two, two way switches.

(d) One socket outlet 6 amp controlled by one switch on the same board with other switches.

(e) One socket outlet 6 amp controlled by one switch on indepdendent board.

(f) One bell point controlled by one bell push.

do all as perItem No 2 above but with copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) for one 16 amp socket outlet on independent board complete complete all as directed and specified. .

S&F Modular switch 1 way 6A, 1 module

S & F Modular switch 1 way 16A, 1 module

S & F Modular switch 2 way 6A, 1 module

S & F Modular Fan step regulator, 120W - 2 module

S & F Socket, 6A - 2/3 pin combined 2 module,

S & F Socket 6A/16A - 2/3 pin combined 2 module

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete.

Modular Bell push 6A 1 module

Buzzer, Ding Dong AC. 230 volts, single pole

Supply and fixing sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.

M & L for Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc complete all as directed and specified.

S & F Modular Metal flush box 1/2 module

S & F Modular Metal flush box 3 module

S & F Modular Metal flush box 4 module

S & F Modular Metal flush box module

S & F Modular Metal flush box module

S & F modular box cover plate with frame 2Module

S & F modular box cover plate with frame3 module

S & F modular box cover plate with frame 4 module

S & F modular box cover plate with frame 6 module

S & F modular box cover plate with frame 8 module

Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete all as directed and specified.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes complete all as directed and specified. :-

(b) 2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit..

(c) 2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit..

(c) 4x6 sqmm + 2x6 sqmm earth continuity conductor in 25 mm dia conduit..

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

S&F LED batten (1.2 m) made of PVC housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make : Philips cat ref no. ENDURALED BATTEN " BN 108C LED 20S PSU CDL WH " or Havells Lumiline plus as approved.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LED's with secondary optics and IP65 protection complete with fixing arrangement and connections as directed

S&F of LED post top lantern energy saving, with symmetrical light distribution, spun aluminium canopy with clear acrylic diffuser, high power LED 15 watt and fixing accessories complete. Make: RUBYMINIPT15WLED830PSYMTOPC

S&F LED spot light 2W IP65 housing is finished in white moulded ring highly translucent and clear honey comb lens is used to get smooth light distribution all as specified and directed.

S&F recess/ suspended LED round panel light 09 watt with powder coated rim 09 watt high efficiency designer recessed mirror optic luminary with ceiling cut out size 9 watt complete, 6500K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs all as required and specified. Make Crompton model no LSDRSD-9W-CDL/NW/WW or equivalent in Wipro, Plilips, Havells.

S&F recess/ suspended LED round star magic panel light colour changing 3 in 1, 12 watt with powder coated with ceiling cut out size 12 watt complete, 6500K including connecting electricity to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm, PF>0.95 and life> 15000 hrs all as required and specified. Make Crompton model no LSDMAGICRMN-12W or equivalent in Wipro, Plilips, Havells.

M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

S & F in replacement existing unsv distribution board iron clad, double door with IP-43 IK-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 4 pole 415 Volts 125 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge

S&F MCB distribution board ETPN, 415 volts 4 way powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43- IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCB distribution board SPN, 240 volts, 8 ways, double door, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCB distribution board SPN, 240 volts, 12 ways, double door, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCBs as per load requirement of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

(a) MCB SP 6 to 16 amp.

(b) MCB SPN 32 amp.

(c) Four pole 63 amp.

S&F ceiling fans complete with blades,down rods,electronic regulator and accessories, , 230 volts, 1200 mm sweep,min air delivery 210 CFM with service value 6.00 BEE,five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Taking down carefully energy meter any type, any capacity upto 40 amp capacity after disconnecting and refixing / connecting the same during rewiring work complete.

S&F air ventilation fan 250 mm in toilet in rectangular in shape, PVC body, white colour 230V including louber shutter complete all as specified and directed.

Angle holder, PVC/Polycarbonate type with back plate,all as complete

S&F wall mounted fan with powder coated guards and blades of approved colour, AC single phase, 230 volts, 50Hz, 1440 rpm, 400mm sweep with adjustable verticle angles & three speed controls mounted within reach of hands with necessary connecting cables recommended/ provided by manufacturer complete. Make: Havells/ Almonard/ Bajaj/ Khaitan as approved.

Supply & fix exhaust fans AC single Phase 230/240 V of size 300 mm sweep with louver, metal body.

(a) MCCB 4 Pole, 415 V, 160 Amps 35 KA

(b) MCCB 4 Pole, 415 V, 63 Amps 25 KA

(c) MCB TPN 63A

(d) MCB SPN 40Amp

(e) On load Change Over 160Amps

(g) LED Phase Indication Lamp

(h) Energy meter 3P 10-60A Cl 1 DIN

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50Sqmm X 3.5Core

Excavating in trenches in Hard / dense / soft soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, etc. and getting out complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point.

Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each all as required and directed.

Supply and laying DWC(Double wall corrugated) HDPE pipe,ISI marked,IS 16205(part 24):2017 part 2 of outer dia 50 mm and inner dia 38 mmwith smooth internal and profiled external surface for non pressure underground cable including all connected acceseries like coupler,o-ring etc complete all as specified and directed Make : Rex Polyextrusion/Gemini/Astral

Shreeganesh Construction

TECH SERVE SOLUTIONS

DMA PROJECTS

GIRNAR CONSTRUCTION