Various Upgradation works at following locations NK Jain Chemistry Lab area NPP Chemistry Lab area Biotech GF and Basement Computer Cell room

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x10 mm.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm.

Steel work in built up tubular (round, square or rectangular hollow tubes and welded mesh etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes and welded mesh.

Providing and fixing modular type under bench cabinet over all size 1.70m x 0.70m (or part thereof) 0.60m deep, with one no. Intermediate horizontal partition and two no. Intermediate vertical partitions. The cabinet size shall be fixed two nos. 0.15m deep drawers and shutters in rest of the front area excluding one 1/3rd portion. Prelaminated MDF board of 18mm thickness shall be used except on back sides of cabinet and bottom of drawers which shall be 8mm thickness. The shutters and drawers shall be fixed with 10mm stainless steel C type handles. The shutters shall be fixed with spring hinges and 40mm cupboard locks to approved make. Th e drawers shall be fixed with powder coated telescopic channel of approved make. The exposed edges of board is to be covered with matching lamination 0.8m thick/ painted with epoxy paint matching to the colour of the laminated board, complete as per drawing, design. The MDF board shall be of approved manufacturer, ISI marked conforming to IS: 14587, exterior grade with choice lamination on one side and balancing lamination on other side. Only front area of the cabinet shall be measured for payment.

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions C.P. brass three outlet swan neck tap complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm.

Providing and fixing of adjustable PVC shoe of size 40mm complete with nut and bolt as per requirement including welding of washer & net on bottom table frame.