REPAIR TO RAIN WATER PIPES, SOIL WASTE / VENT PIPES, VALLEY GUTTERS, ROOF TREATMENT AND CERTAIN JOINERY WORK IN THE AOR UNDER AGE B/R- II OF GE (WEST) BAREILLY.

Amount

Dismantling of cast iron /PVC/AC/SGSW/CI vent pipe including bends/junction/sockets pipes 75/100mm dia jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Re-fixing of PVC (SWR) pipes of 110 mm dia soil/ waste or rainwater pipes single socketed in any length with rubber ring joint fixed to walls complete all as aspecifed and directed.

Re-fixing of CI pipes of 100 mm dia soil/ waste or rainwater pipes single socketed in any length with rubber ring joint fixed to walls complete all as aspecifed and directed.

S&F for UPVC 110mm dia soil/ waste and rainwater drainage pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed

S&F UPVC 75mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed

S&F UPVC 110mm dia bends complete all as specified and directed.

S&F UPVC 75mm dia bends complete all as specified and directed.

M & L in repairs 75 mm dia UPVC nahani trap/floor trap with CP grating including jointing to waste pipe including making good by fixed in cement concrete type B1 (1:2:4) complete all as specified and directeed.

S&F 100mm bore CI soil waste / vent pipe (spun type) in any length with or without ears with cement joint to wall with stack clamps out of 110mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof etc. including black japan paints complete all as specified and directeed.

S & F spun iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to floor/walls complete all as specified and directed.

S&F in repairs CI 100mm bore Y-Junction piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door complete all as specified and directeed.

S&F in repair CI 100mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door complete all as specified and directed.

S&F in repair CI 75/80 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door complete all as specified and directed.

S&F in repair 100mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed.

S&F in repair 80mm bore CI bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door complete all as specified and directed.

S&F in repairs 80 mm bore CI cowl complete all as specified.

M&L for run lead joint for 100mm bore for branch piece/soil waste pipe/ vent pipe etc complete all as specified.

M&L for run lead joint for 75/80mm bore branch piece/soil waste pipe/ vent pipe etc complete all as specified.

S & F for 1.25 mm thick plain, galvanised, mild steel sheeting, ogee type, half round type as in gutters, valley gutter, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and gutters may be stiffened with stays, the spacing of stays usually should not exceed 40 cm including dismantling of existing gutters, vally gutters and like, dismantling & re-fixing of roof sheet, if reqd and shall be as under :- (a) gutters shall be supported with FI bracket close to the socket and another in the centre of the gutter. (b) Plain ended and open end gutter shall be supported with a bracket on either side of each joint. (c) Single peice sheet shall be used for gutters to avoid joints and joints at plain end/ open end shall be lapped & soldered for at least 40 mm of the full girth, in the direction of flow. (d) The jointing faces shall be primed with solder to ensure running of the jointing metal. (e) Brackets shall be fabricated from mild steel flats of the size 40x6 mm bent to shape required, fixed to the side of rafters/purlins/angles they shall be fixed rigidly to the sides of rafters with 3 nos. 10 mm dia bolts, nuts and washers. (f) The requisite slope in the gutters shall be given in the line of bracket and brackets shall not placed more than 75 cm spacing. (g) Building side/ wall side edge of gutter shall be embedded in walls with PCC type B0, 1:2:4 using 12.5 mm graded stone aggregate after cutting grooves where required. Note :- Flat iron, angles shall be measured separately.

S & F for bands, straps, brackets, supports or stays for gutters, rainwater, ventilating pipes, including bolts/ bending and welding angles /flat irons, as necessary, gusset plates, riveting, etc. if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Dismantling of roof terracing, cement mortar, brick padding, concrete (un-reinforced) alongwith existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all loose dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material outside of MOD land complete all as specified and directed.

M & L for providing PCC 1:2:4 Type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, haunching, coping, curved filllet and similar works of over RCC roof surface including rounded or chamferred on edges complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster in cement mortar 1:4 including mixing of liquid water proofing compound @ 200 ml per 50 kg of cement over concrete roof surface finished even and smooth without using extra cement complete all as specified and directed. NOTE- WATER PROOFING COMPOUND SHALL BE MEASURED AND PAID SEPARATELY AS SUPPLY ONLY.

M & L for providing polymer based waterproofing membrane (IWL Hyperplas Polyster manufactured by IWL, Super Thermolay manufactured by STP Limited, Torch Shield AP manufactured by Pidilite Industries) minimum weighing 3.50 Kg per sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 Grams per sqm) laid by forced torch application having minimum 10 cm end laps both ways, over and including polymeric primer @ 0.30 Litre per sqm and polymeric modified bitumen @ 1.20 Kg per square metre after cleaning of roof surface complete all as specified and directed.

M & L for applying two coats of Aluminium paint @ 200 Gram per Sqm, on APP membrane surface of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

S&F in repairs prepainted galvantunm aluminium zinc coating GI based corrugated sheet of 0.50 mm th and colour having tensile strength of 550 mpa as in roof covering /callading, riges,to wall fixed with screw including dismantling of exicting roof covering complete all as specified and directed.

S&F in repairs prepainted galvantunm aluminium zinc coating GI based plain sheet of 0.50 mm th and colour having tensile strength of 550 mpa as in roof covering /callading, riges,to wall fixed with screw including dismantling of exicting roof covering complete all as specified and directed.

M & L for Repairs to steel windows by replacing all old friction hinges with box type hinges, making the windows functional incl all necessary welding etc complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n. exc 1.5 sqm incl removing from the premises complete all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) one side prelam pvc in place of plain and another side decorative, consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off single shutter/ double shutter from the frame)exc 1.5 sqm and n exc 4.00 swm incl removing from the premises complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and n/exc 2 sqm each incl removing from the premises complete all as specified and directed.

S&F 2nd class hard wood chowkhat or frames, plain solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S& F for Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood glazed and Skelton shutters 30 mm thick open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part I section 8 clause 8.20 (a) supplied and fitted to chowkhats complete all as specified and directed.

S&F PVC boards 18/19 mm thick any colour/ prelaminated as in cabinets incl shelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer's instructions including piano hinges, magnet catcher, handles etc. complete all as specified and directed.

S&F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wie gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and directed. and all as per DRG No TD/088 dt 07 Jan 2002. Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (ii) rate for filling PCC in frame deemed to be included in quoted rates (iii) MS grill shall be measured and paid seperatly under relevant item of schedule

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 complete all as specified and directed.

S&F Butt hinges, medium weight, Stainless steel and fixed of size 150mm complete all as specified and directed.

S&F aluminum anosided barrel tower bolts 150mm long, of extruded section and fixed complete all as specified and directed.

S&F aluminum anosided handle 150mm long of extruded section and fixed complete all as specified and directed.

M& L for 125 mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 300mm size aluminium alloy anodised sliding door bolt with hasp & staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolt and sliding bolt of extruded section or cast alluminium alloy complete all as specified and directed.

M&L preparation of new wooden surfaces and applying two coats of synthetic enamel paint over one coat of pink primer over 10 cm width or girth complete all as specified and directed.

M& L for Preparation of new iron surface and two coat of synthetic enamel paint ovar a coat of red oxide primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed

S&F in repair sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S & F in repairs Galvanized mild steel wire mesh 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned takes or galvanised Wire staples complete all as specified and directed

S&F in repairs150mm helical door spring complete all as spd and directed

M&L for cleaning of water storage tanks of capacity 500 Ltrs located at various places at any height by removing the inlet and outlet coupling connections, cleaning and removing all dirty/muddy water from the service tank, removing mud deposited on the tank floor, including scraping all the scale formation using hard scrubbers, brooms etc., cleaning inside surfaces using bleaching powder; writing the details of tanks like date of cleaning, capacity of tanks and due date for next cleaning etc. on the out side of the tank with synthetic enamel paint with letter size 10cm in white colour, over yellow background on black coloured tanks and black colour over yellow background on white tanks of size 60x40cm including cleaning of bottom surfaces of platform, replacement of unserviceable/ defective inlet and outlet coupling and fittings, etc. complete all as specified and as directed

M&L for cleaning of water storage tanks of capacity 1000 Ltrs located at various places at any height by removing the inlet and outlet coupling connections, cleaning and removing all dirty/muddy water from the service tank, removing mud deposited on the tank floor, including scraping all the scale formation using hard scrubbers, brooms etc., cleaning inside surfaces using bleaching powder; writing the details of tanks like date of cleaning, capacity of tanks and due date for next cleaning etc. on the out side of the tank with synthetic enamel paint with letter size 10cm in white colour, over yellow background on black coloured tanks and black colour over yellow background on white tanks of size 60x40cm including cleaning of bottom surfaces of platform, replacement of unserviceable/ defective inlet and outlet coupling and fittings, etc. complete all as specified and as directed

M&L for cleaning of water storage tanks of capacity 2000 Ltrs located at various places at any height by removing the inlet and outlet coupling connections, cleaning and removing all dirty/muddy water from the service tank, removing mud deposited on the tank floor, including scraping all the scale formation using hard scrubbers, brooms etc., cleaning inside surfaces using bleaching powder; writing the details of tanks like date of cleaning, capacity of tanks and due date for next cleaning etc. on the out side of the tank with synthetic enamel paint with letter size 10cm in white colour, over yellow background on black coloured tanks and black colour over yellow background on white tanks of size 60x40cm including cleaning of bottom surfaces of platform, replacement of unserviceable/ defective inlet and outlet coupling and fittings, etc. complete all as specified and as directed

S&F rotational moulded polythene water storage tanks tripple layer white in colour (cylindrical vertical with closed top) hoisted and fixed in position capacity 500 ltrs including dismantling of existing unserviceable water tank capacity exceeding 250 ltr and not exceeding 500 ltr complete all as specified in SSR Part I and directed.

S&F rotational moulded polythene water storage tanks tripple layer white in colour(cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 1000 ltr complete all as specified in SSR Part I and directed.

S&F rotational moulded polythene water storage tanks tripple layer white in colour(cylindrical vertical with closed top) hoisted and fixed in position capacity 2000 ltrs including dismantling of existing unserviceable water tank capacity exceeding 500 ltr and not exceeding 2000 ltr complete all as specified in SSR Part I and directed.

S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. complete all as specified and directed.

S&F in repairs of 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed.

S&F in repairs door seal of aluminium powder coated with cotton mat of length 90 cm to 100 cm long complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F 20 mm bore tubes medium grade galvanised iron with all new fitting and fixed to walls and ceiling or laid in floors including taking down old unserviceable steel tubing complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed.

S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed

S & F of water closet vitreous china squatting pan ‘Orissa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. including lean concrete as required complete all as specified and directed.

S & F in repairs PVC low level flushing cistern of capacity 10 ltrs with inlet, ball valve, float and handle including brackets and flush pipe of PVC 32mm dia complete all as specified and directed.

Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches, pillars etc complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 15mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:4) including finishing the surface even and fair complete all as specified and directed.

M&L for 12 mm thick cement plaster on brick surfaces or concrete surfaces in CM (1:6) including finishing the surface even and fair and applying 1mm thick birla wall care putty and including taking down existing defective cement plaster on brick or stone masonary complete all as specified and directed.

M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra cement and including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified and directed. Note : WPC shall be measured and paid seperately.

Supply only liquid water proofing compound all as specified and directed.

M&L for 5 mm thick cement plaster on fair faces of bricks or concrete in ceiling & chajja using CM 1:3 finished even and smooth without using extra cement including taking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified and directed.

M&L for preparation of new distempered surface of walls including plugging nail holes with cement based putty,making good surface and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of Cement based paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying three coat of white wash on ceilings surface complete all as specified and directed.

M&L for preparation of old plaster surfaces and applying one coat of white wash on walls complete all as specified and directed.

M & L for Complete removal of existing treatment from wall/ ceiling surfaces and rubbing down with sand paper to have even and smooth surfaces complete all as specified and directed.

M&L for applying layer of birla wall care putty on wall/ceiling surfaces including rubbing down the surfaces with sand paper after getting dried to obtain a smooth & even surface complete all as specified and directed.

M&L for preparation of old distempered surface of walls including plugging nail holes with cement based putty,making good surface to match existing surface and applying Two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. .

S&F in repairs waste coupling for wash basin and kitchen sink complete all as specified and directed.

S&F in repairs PVC waste pipe 25 mm dia 750 to 800mm long fixed to waste fitting of wash basin including socket suitable for waste fitting complete all as specified & directed

S&F in repairs centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed.

S&F in repairs chromium plated fancy type stop vlave /angle valves/ two way angle valve with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.

S&F in repairs chromium plated fancy type long body bib taps with cast copper alloy screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore pipe complete all as specified and directed.

S&F in repairs 100 mm dia shower rose of chromium plated brass for fixing 15 mm pipe with shower arm size 195 mm long with bend of 45 degree with flange complete all as specified and directed.

S&F in repairs chromium plated 15 mm bore wall mixture with connection for shower arragement complete all as specified and directed.

S&F in repairs water jet for ETWC chromium plated with PVC connection complete all as specified and directed.

S&F CP heavy duty extension pieces 15mm bore and 25 mm long in repairs complete all as specified and directed.

S&F in repairs hand shower (health faucet) 1 mtr PVC tube with wall hook complete for ETWC complete all as specified and directed.

S&F in repairs PVC connections 15mm dia & 600mm long with PTMT nuts complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300 x 200mm x 7mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles incl plastering 10mm thick in CM 1:4 and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for colour glazed ceremic coloured tiles in vertical surface 300x450 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick screed bed or bedding layer of cement mortar 1:4 cement and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for non skid ceramic coloured tiles Edge cut 7 to 8 mm thick (Square/rectingular) area of each tiles exceeding 0.11 Sqmbut not exceeding 0.18 Sqm (400 x 400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screeding 15mm thick in CM 1:6 and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

All as per Serial item No 98 above but as in vertical surfaces incl plastering 10mm thick in CM 1:4 and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for vitrified Ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm( 600 x 600 ) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl screeding 15mm thick in CM 1:6, and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

All as per serial item No 100 but as in vertical surfaces incl plastering 10mm thick in CM 1:4,and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

S&F in repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F in repairs 20 mm dia Mild steel fancy type drapery curtain rod with brackets and lattu & other connected accessories etc complete all as specified and directed.

S&F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed.

S&F in repairs Vitreous china counter top wash basin snow white oval size 560mm x 400mm including PVC waste pipe, PVC connection 450 mm long ,32 mm bore CP waste coupling ,china & plug, brackets etc complete all as specified and directed.

S&F in repairs Vitreous china counter top wash basin white size 600mm x 400mm including PVC waste pipe , PVC connection 450 mm long ,32 mm CP waste coupling ,chain & plug, brackets etc complete all as specified and directed.

S&F for in repairs kitchen sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs plate rack made out of 1 mm thick stainless steel sheet of size 75 cm x 90 cm x 25 cm with all internal fittings complete all as specified and directed.

M & L for Repair of aluminium door/window/ ventilator/ partition wall etc of any size / any number of panels including taking down (if required) & refixing for easy closing/ opening/ tightening of hinges or changing the position of hinges, adjustment of floor door spring of hydraulic door closure, adjustment of tower bolts, sliding bolts etc changing of mortice lock complete all as specified and directed

Notes:- (a) Materials not included in sch of credit and debris from the dismantling having lowest value/Nil value shall be the property of department. The same shall be removed/ disposed or deposited by the contractor in MES stores yard of GE (West) Bareilly as directed for which no additional payment shall be made. The contracotor shall be fully responsible to safe guard these materials against losses/theft/deterioration etc till the same are deposited by him in MES Store yard (b) The contractor or his authorised representative shall attend office of AGE B/R daily at 0930 hrs on all working days to take orders/instructions regarding the jobs to be done. A proper record of jobs ordered and completed shall be entered in a register duly signed and dated by Engineer-in-Charge and contractor. (c) Penalty shall be imposed on the contractor for not completing the jobs in time bound manner as under :- (i) Not completing the jobs requiring one tradesman within 24 hrs - Rs 300/- per day per job (ii) Not completing the jobs requiring two tradesman within 48 hrs - Rs 500/- per day per job. (iii) Not completing the jobs requiring more than two tradesman within 7 days - Rs 1500/- per day per job (d) The above aspects shall be borne in mind by the tenderer while quoting the rates. The rates quoted by the tenderer shall be deemed to include the above aspects. (e)Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.

multiple alliance enterprises

M/S Harshri Nath Enterprises

hardeep singh enterprises