CERTAIN REPAIR TO OFFICERs MD ACCN INCL SERVANT QTRs UNDER AGE B/R-II AT IMA DEHRADUN

Amount

M&L for Complete removing of existing treatment from wall / ceilling by using mechanical sander/grinder complete all as specified and directed.

M&L for applying 3mm thick damp proof wall care putty, Preparation of puttied wall/ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. Note : 1. After completion of distempering, contractor have to carry out following work whose rates to be included while quoting the rates. No extra payment will be done on this account and damage if any to be borne by the contractor :- (i) cleaning of floor with floor cleaner and stain should be removed from wall/door/window. (ii) cleaning of fan after removing and refixing the same. (iii) cleaning of curtain rod. (iv) shifting of furniture.

M&L for Preparation of old plastered surfaces of walls / ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of oil emulsion distemper on walls/ceiling using mechanical sander/grinder complete all as specified and directed.

M&L for Preparation of surfaces of wall / ceiling and applying two coats of weather coat exterior paint over a coat of primer and over a coat of 3mm thick white cement base water proof putty including sanding/grinding complete all as specified and directed (work to be carried upto a height of 7.5m). Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+

M&L for Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

M&L for Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

M&L for Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Preparation of old surfaces of wall / ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spotsand applying two coat weather coat exterior paint complete all as specified and directed (work to be carried upto a height of 7.5m). Make : Asian paints Apex Ultima/Berger Paints weather coat Glo/Shalimaar Paints weather PRO+

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one coats as directed by Engineer in Charge.

M&L in repair Drapery rod in any length, high strength stain less steel pipe (SS-304) having outer dia 25-28mm a pair of brackets & a pair of stainless steel finials (Per length 1.0-2.0m of Rod) complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed

Taking down steel window shutter n.exc 1 sqm and refixing in the same opening after replacement of broken hinges including welding, grinding, painting etc each complete all as specified and directed

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

S&F 2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S&F in repair Solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR 2020 complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame fixing in the frame at site complete all as specified in SSR 2020 and directed

S&F 35mm thick 2nd class hardwood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc complete all as specified and directed.

S&F double rebated Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including 3mm thick frosted glass panes fixed with glazing oil putty and wire mesh complete all as specified and directed.

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed

S&F 30mm thick flush shutter solid core construction with partical board core and plywood face panels commercial type on both sides complete all as specified and directed

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners complete as per dirn of Engr-in-Charge. (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made).

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/Stainless steel dash fasteners complete as per dirn of Engr-in-Charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be fixed with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge.

M&L 35mm thick factory made solid WPC (Wood plastic composite) moulded gauged door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacturer instruction complete all as specified and complete all as specified and directed.

M&L for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one Nos wire gauged shutter sliding type, with aluminum sections as per Series-B (18mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 6mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type 2 Nos aluminium handle of size 75mm and locking system including aluminium grill of 5mm thick, average width of aperture 50mm and SS wire cloth 0.46mm dia of wire and 1.40 aperture and provision of openable space for AC with 04 Nos of tower bolt etc complete all as specified and directed.

S&F aluminium powder coated frame for fixed partition of section 47.62mm x 44.45x1.6 mm thick, shutter glazed with tinted glass (Modi Guard) 5mm thick fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight all as per IS 737-1986 complete all as specified and directed.

S&F aluminium powder coated door fixed on aluminium frame of section 47.62mm x 44.45x1.6 mm thick, shutter glazed with tinted glass 5mm thick fixed with rubber gasket and aluminium strips as per standard method with cast type handle aluminium anodised of 150mm size 2 Nos (One on each side of shutter), hydraulic door closer, aluminium tower bolt arrangement of standard make with locking arrangement of mortise lock(brass body) of size 100mm and butt hinges, door stopper etc complete all as specified and directed.

S&F Butt hinges, 100 mm long, stainless steel medium class with hinge pin anodised and fixed complete all specified as directed

S&F in repairs 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.

M&L for Preparing surfaces holding the members in true position and welding in repairs n. exc 2.5 cm in length, thickness of metal to be welded exc 9 mm and nexc 20 mm complete all as specified and directed

S&F in repairs stainless steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks/wooden beads or galvanized wire staplescomplete all as specified and directed

S&F 4mm thick sheet glass ordinary quality & glazing with oil putty in squares not exc 0.5 Sqm in each pane including hacking out old broken glass pane of any thickness complete all as directed.

S&F 4mm thick frosted sheet glass ordinary quality & glazing with oil putty in squares not exc 0.5 Sqm in each pane including hacking out old broken glass pane of any thickness complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for capsule pattern fully vitrified coloured tiles 9 to 10mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. Note :- Colour as approved by GE.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L for Vitrified ceramic coloured tiles 8 to 9 mm thick (Square or rectangular) polished, area of each tile n exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured of cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L for Glazed ceramic coloured tiles of size 450x300x7-8mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour grout to match including rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 for receiving wall tiles and dismantling of existing tile complete all as directed.

S&F in repair single piece Vitreous china any shade cascade floor mounted single piece water closet P/S trap with dual flush cistern for UF soft close slim seat cover, hinges fitting, conversion bend, fixing accessories set complete all as specified and directed. Make : Jaquar Cat part No OPS-WHT15753NS250UFSMZ/ Cera cat part No S1013105/Kajaria cat part No KB-3007

S&F Vitreous china full set pedestal type wash basin, white, flat back, size 585x450x220mm including bracket, CP brass waste coupling and waste pipe fixed in repair complete all as directed. Make : Jaquar Cat part No Jaguar FLS-WHT-5801 & 5301/Cera cat part No S2040112 & S2090107 or equivalent Make : Kajaria/Somany

S&F in repair reinforced PVC connection 15 mm size with brass nuts of length 450 mm complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick toughned glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.

S&F in repair Corner glass shelf assembly 300mm length with bracket complete all as specified and as directed.

S&F in repair toilet paper holder brass CP or stainless steel with flap guard fixed to walls with chromium plated brass screws. Make : Cera/Jaquar/Somany

S&F in repair soap dish holder fixed to walls with chromium plated brass screws. Make : Cera/Jaquar/Somany

S&F CP brass hot & cold single lever basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB complete all as directed by Engineer-in-charge. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flanges in complete all as specified. Make : Jaquar Opal Prime Series/Cera Ruby series/Somany Bellis series

S&F in repairs CP brass hot & cold 15mm dia single lever sink mixer swinging spout (wall mounted model) with connecting legs & wall flanges complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F in repairs Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, coupling, washers and waste pipe including bedding in cement morter on to dwarf wall or including fixing cantilver brackets overall size 405mm x 460mm x 203 mm bowl size 405 mm x354mm x 203mm complete all as directed.

S&F 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F CP fancy type twin Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series

S&F in repair CP Health faucet telephonic type with CP with 1.5m long flexible pipe. Make : Jaguar/CERA/Somany

S&F in repair CP brass overhead shower square fancy type 100x100 mm with extension CP Arm pipes. Make : Cera/Jaquar/Somany

S&F in repair SS towel ring fixed with screw in wall complete all as specified and directed. Make : Cera/Jaquar/Somany

S&F in repair SS towel rail, 600mm long. Make : Cera/Jaquar/Somany

S&F in repair SS chromium plated towel rack with hooks, 60cm long between flanges complete 600mm long or as approved by GE all as specified and directed. Make : Cera/Jaquar/Somany.

M&L for Rendering 15 mm thick in cement mortar (1:4) using coarse sand on brick or concrete surface finish even and fair finishing, curing scaffolding including mixing of water proofing compound and taking down of existing cement plaster etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar (1:6) using coarse sand on brick or concrete surface finish even and fair finishing, curing scaffolding including taking down of existing cement plaster etc complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints and necessary formwork and demolition of existing concrete complete all as directed

M&L in repair for 18/19mm thick both side prelaminated colour WPC board for cup board shutter and frame & fixed at site including Auto closing hinges 35 mm of 0 crank (KH-001) openable at 110 degree/Continuous (piano) hinges stainless steel, bright finish or electrogalvanised width of flap 30 mm and stainless steel handles of 150 mm size complete all as specified and directed.

S&F in repair Chromium plated stainless steel wire basket (storage, cup and saucer, Plate, cutlery, Grain Trolley, Bottle pull out) pull out type Grade 304 with necessary fixing clips including ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity of 50 kgs etc complete all as specified and directed. Make : Hettich, Hafele, Butterfly

S&F in repair Door seal bottom for insect prevention with Carbon metal seal strip with rubber insulation, Anti rust, weather proof, soundproof for all door type, brown colour fixed to door with carbon screws complete all as directed.

S&F in repair Stainless steel (SS-304) plate rack of size 24 inch X 24 inch X 10 inch complete all as directed.

M&L for welded steel wire fabric weight n exc 4kg/sqm fixed/welded to wood or steel members complete all as directed (wight per sqm to be ascertained by a BOO)

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) pointing in white cement (1:2) using marble dust and half rounding of exposed edges including taking down of existing shelf complete all as specified and directed.

S&F PVC (SWR) 110mm dia pipes rating 6 Kg/cm2 single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC (SWR) 75mm dia pipes rating 6 Kg/cm2 single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC bends ISI marked fitted with oval access doors 75/100 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

S&F PVC (SWR) bends ISI marked 110mm dia fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC (SWR) bends 75mm dia fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC (SWR) floor trap ISI marked 100mm dia, plain with grating jaali including jointing with solvent cement fixed in repair complete all as specified and directed.

S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc including taking down existing steel tubing complete all as directed.

S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 15/20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S&F in repair Ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms complete all as specified and directed.

S&F in repair 15mm GI Elbow/union/socket/Tee nipple (ISI marked) for plumbing complete all as specified and directed.

S&F in repair 15mm GI long screw (ISI marked) for plumbing with all accessories complete all as specified and directed.

S&F in repair 15mm PVC bib tap (ISI marked) complete all as directed.

S&F in repair 15mm CI bib tap (ISI marked) complete all as directed.

S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white of approved make, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

S&F Vitreous china wash down water closet pan (pedestal pattern) white of approved make, including seat cover with necessary PVC pipe fittings fixed in repair complete all as specified and directed.

S&F in repair Vitreous china wash basin, white, flat back, size 550x400mm of approved make including bracket waste pipe and coupling complete all as directed.

S&F PVC low level flushing cistern 10 Ltr capacity syphonic action type white ISI marked (dual flush) including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

S&F Vitreous china Counter top wash basin, white of approved make, fixed in repair including coupling, waste pipe and all accessories complete all as directed. Make : Jaquar/ CERA/HINDWARE

S&F in repairs PVC sandwich wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specificationcomplete all as specified and directed.

M&L for R.C.C 1:2:4 nominal mix type B1 (20mm graded agg) Slabs supported on walls, beams and columns in floors, roofs, canopies, deck slabs and in shelves and the like complete all including demolition of existing slabs and necessary formworks.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall etc fixed in repairs complete all as directed.

S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, gutter fixed in repairs complete all as directed.

Dismantling existing timber scantling in any position complete all as specified and directed.

S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors conforming to FE-290 (grade E-165) fixed with angle cleats or other connecting plates complete all as directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed

M&L for 300x300x25mm heavy duty Chequered cement concrete tile of any pattern as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

M&L for fibre reinforced liquid applied elastomeric waterproofing membrane PU-Acrylic Hybrid Polymer on door/window chajjas, Roof, wall etc by scrapping of damaged portion and preparing the surfaces by 15 mm thick rendering in CM 1:3 and finished even and smooth using extra cement over concrete surfaces and benching including weathering slightely rounded or chamfered angles and applying a coat of PU (01 ltr/sqm appyling area) over a coat of priming coat of the same component all as directed by Engr-in-charge (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Make : Dr fixit, Sika, Fosroc, Berger

M&L for 6mm thick zypsum board, fixed to timber and iron frame work with screw including dismantling of existing board complete all as directed.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework including taking down existing boards any thickness etc complete all as directed

Amit Traders (BID ID -3456073)

Shri Radhey Associates (BID ID -3461649)

Pragati Enterprises (BID ID -3456150)

M/S PUNDIR BUILDERS (BID ID -3456432)