Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.0 CrAccepted-Finance 429 FUNCTIONAL INDUSTRIAL ESTATE PATPARGANJ EAST DELHI DELHI 110092 | EAST DELHI | DELHI | 110092 | ₹1.0 Cr | 1 | Accepted-Finance Single qualified Bidder |
| Sl No | Description | Qty | Unit | TK Elevator India Pvt Ltd. L1 |
|---|---|---|---|---|
| 1.00Lift | ||||
| 1.01 | Supply, installation, testing and Commissioning of minimum 20 passenger Lift at Seminar Hall at Thavakkara campus -
Machine Room Less, Capacity/Weight 20 Passenger (1360 Kg), Speed 1.0 MPS, electric traction type, Stainless steel (including freight & landing charges, applicable taxes and duties in country of origin and in India etc. except GST) and type suitable for operation on 415 V +/- 10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control,electromagnetic brake system, Simplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman's switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. And at all floors with UP/DOWN direction, shaft wiring and lift lighting accessories, braille buttons, audio announcement along with recorded message as approved by Engineer in Charge, all accessories including Safe Landing Device (SLD), Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door as complete as required. The drives of elevator shall meet the requirements of IEEE 519/2014. PMSM traction motor (having efficiency equivalent to IE3 or better as in IS 12615) of machine room less elevator shall be of gearless type as per technical specifications. Having Automatic center/side opening stainless steel doors, Matte finish stainless steel car enclosure provided with stainless steel Handrails on three sides, 2 mm fluted SS flooring as applicable in accordance of following details 4 stops, 4 openings and entrance and exit at same side and suitable for travel height of minimum 22 meter approximate. (Shaft Size 2350mm (width) x3000mm (depth) with door opening of 1100 mm (width) and 2100 mm (height) The equipment should be BMS compatible. All components, fabrication and procedures shall confirm to relevant IS standards/Code and complete in all respects as per technical specifications Test reports from NABL accredited testing labs for all constituent compounds shall be produced. Make: TK Elevators/Kone/Schindler/Johnson/Otis | 1 | no | 25,30,000 ₹25,30,000 Lowest |
| 1.02 | Supply, installation, testing and Commissioning of minimum 13 passenger Lift at New Academic Block at Mangattuparamba campus -
Machine Room Less, Capacity/Weight 13 Passenger (884 Kg), Speed 1.0 MPS, electric traction type, Stainless steel (including freight & landing charges, applicable taxes and duties in country of origin and in India etc. except GST) and type suitable for operation on 415 V +/- 10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, electromagnetic brake system, Simplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman's switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. And at all floors with UP/DOWN direction, shaft wiring and lift lighting accessories, braille buttons, audio announcement along with recorded message as approved by Engineer in Charge, all accessories including Safe Landing Device (SLD), Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door as complete as required. The drives of elevator shall meet the requirements of IEEE 519/2014. PMSM traction motor (having efficiency equivalent to IE3 or better as in IS 12615) of machine room less elevator shall be of gearless type as per technical specifications. Having Automatic center/side opening stainless steel doors, Matte finish stainless steel car enclosure provided with stainless steel Handrails on three sides, 2 mm fluted SS flooring as applicable in accordance of following details 3 stops, 3 openings and entrance and exit at same side and suitable for travel height of 14.5 meter approximate. (Shaft Size 2600mm (width) x2200mm (depth) with door opening of 1100 mm (width) and 2100 mm (height) The equipment should be BMS compatible. All components, fabrication and procedures shall confirm to relevant IS standards/Code and complete in all respects as per technical specifications Test reports from NABL accredited testing labs for all constituent compounds shall be produced. Make: TK Elevators/Kone/Schindler/Johnson/Otis | 2 | no | 17,95,000 ₹35,90,000 Lowest |
| 1.03 | Supply, installation, testing and Commissioning of minimum 13 passenger Lift at Academic Block at Palayad campus -
Machine Room Less, Capacity/Weight 13 Passenger (884 Kg), Speed 1.0 MPS, electric traction type, Stainless steel (including freight & landing charges, applicable taxes and duties in country of origin and in India etc. except GST) and type suitable for operation on 415 V +/- 10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, electromagnetic brake system, Simplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman's switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. And at all floors with UP/DOWN direction, shaft wiring and lift lighting accessories, braille buttons, audio announcement along with recorded message as approved by Engineer in Charge, all accessories including Safe Landing Device (SLD), Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door as complete as required. The drives of elevator shall meet the requirements of IEEE 519/2014. PMSM traction motor (having efficiency equivalent to IE3 or better as in IS 12615) of machine room less elevator shall be of gearless type as per technical specifications. Having Automatic center/side opening stainless steel doors, Matte finish stainless steel car enclosure provided with stainless steel Handrails on three sides, 2 mm fluted SS flooring as applicable in accordance of following details 3 stops, 3 openings and entrance and exit at same side and suitable for travel height of minimum 15.5 meter approximate. (Minimum Shaft Size 2150mm (width) x 2000mm (depth)) with door opening of 1100 mm (width) and 2100 mm (height) The equipment should be BMS compatible. All components, fabrication and procedures shall confirm to relevant IS standards/Code and complete in all respects as per technical specifications Test reports from NABL accredited testing labs for all constituent compounds shall be produced. Expansion of two more floors in future shall be considered and bidder shall provide necessary provisions for the same in the lift system. Make: TK Elevators/Kone/Schindler/Johnson/Otis | 1 | no | 17,95,000 ₹17,95,000 Lowest |
| 1.04 | Supply, installation, testing and Commissioning of minimum 20 passenger Lift at Academic Block at Palayad campus-
Machine Room Less, Capacity/Weight 20 Passenger (1360 Kg), Speed 1.0 MPS, electric traction type, Stainless steel (including freight & landing charges, applicable taxes and duties in country of origin and in India etc. except GST) and type suitable for operation on 415 V +/- 10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, electromagnetic brake system, Simplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman's switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. And at all floors with UP/DOWN direction, shaft wiring and lift lighting accessories, braille buttons, audio announcement along with recorded message as approved by Engineer in Charge, all accessories including Safe Landing Device (SLD), Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door as complete as required. The drives of elevator shall meet the requirements of IEEE 519/2014. PMSM traction motor (having efficiency equivalent to IE3 or better as in IS 12615) of machine room less elevator shall be of gearless type as per technical specifications. Having Automatic center/side opening stainless steel doors, Matte finish stainless steel car enclosure provided with stainless steel Handrails on three sides, 2 mm fluted SS flooring as applicable in accordance of following details 3 stops, 3 openings and entrance and exit at same side and suitable for travel height of minimum 15.5 meter approximate. (Shaft Size 2100mm (width) x2950mm (depth) with door opening of 1100 mm (width) and 2100 mm (height) The equipment should be BMS compatible. All components, fabrication and procedures shall confirm to relevant IS standards/Code and complete in all respects as per technical specifications Test reports from NABL accredited testing labs for all constituent compounds shall be produced. Expansion of two more floors in future shall be considered and bidder shall provide necessary provisions for the same in the lift system. Make: TK Elevators/Kone/Schindler/Johnson/Otis | 1 | no | 24,60,000 ₹24,60,000 Lowest |
Tender Value
₹90 L
EMD Value
₹50,000
Closing Date
14 Nov 2025, 3:00 pmClosed
Deputy Vice President
Projects Division HLL Lifecare Limited, HLL Bhavan Poojappura Thiruvananthapuram
Supply, Installation, Testing and Commissioning of 5 Nos. Lift Systems as per tender specifications for various buildings at Thavakkara, Mangattuparamba and Palayad campuses of Kannur University under PM-USHA scheme
2025_HLL_797943_2
HLL/CHO/PROJ/EXT/KAN-UNI/LIFTS
Open Tender
Miscellaneous Works
Item Rate
120 days
Palayad, Thavakkara and Mangattupramba campus
Please refer Tender documents.
14 documents required · 14 mandatory
₹2,950
₹50,000
5 Aug 2026
18 Oct 2025
15 Nov 2025
18 Oct 2025
14 Nov 2025
18 Oct 2025
Amount
Supply, installation, testing and Commissioning of minimum 20 passenger Lift at Seminar Hall at Thavakkara campus - Machine Room Less, Capacity/Weight 20 Passenger (1360 Kg), Speed 1.0 MPS, electric traction type, Stainless steel (including freight & landing charges, applicable taxes and duties in country of origin and in India etc. except GST) and type suitable for operation on 415 V +/- 10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control,electromagnetic brake system, Simplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman's switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. And at all floors with UP/DOWN direction, shaft wiring and lift lighting accessories, braille buttons, audio announcement along with recorded message as approved by Engineer in Charge, all accessories including Safe Landing Device (SLD), Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door as complete as required. The drives of elevator shall meet the requirements of IEEE 519/2014. PMSM traction motor (having efficiency equivalent to IE3 or better as in IS 12615) of machine room less elevator shall be of gearless type as per technical specifications. Having Automatic center/side opening stainless steel doors, Matte finish stainless steel car enclosure provided with stainless steel Handrails on three sides, 2 mm fluted SS flooring as applicable in accordance of following details 4 stops, 4 openings and entrance and exit at same side and suitable for travel height of minimum 22 meter approximate. (Shaft Size 2350mm (width) x3000mm (depth) with door opening of 1100 mm (width) and 2100 mm (height) The equipment should be BMS compatible. All components, fabrication and procedures shall confirm to relevant IS standards/Code and complete in all respects as per technical specifications Test reports from NABL accredited testing labs for all constituent compounds shall be produced. Make: TK Elevators/Kone/Schindler/Johnson/Otis
Supply, installation, testing and Commissioning of minimum 13 passenger Lift at New Academic Block at Mangattuparamba campus - Machine Room Less, Capacity/Weight 13 Passenger (884 Kg), Speed 1.0 MPS, electric traction type, Stainless steel (including freight & landing charges, applicable taxes and duties in country of origin and in India etc. except GST) and type suitable for operation on 415 V +/- 10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, electromagnetic brake system, Simplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman's switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. And at all floors with UP/DOWN direction, shaft wiring and lift lighting accessories, braille buttons, audio announcement along with recorded message as approved by Engineer in Charge, all accessories including Safe Landing Device (SLD), Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door as complete as required. The drives of elevator shall meet the requirements of IEEE 519/2014. PMSM traction motor (having efficiency equivalent to IE3 or better as in IS 12615) of machine room less elevator shall be of gearless type as per technical specifications. Having Automatic center/side opening stainless steel doors, Matte finish stainless steel car enclosure provided with stainless steel Handrails on three sides, 2 mm fluted SS flooring as applicable in accordance of following details 3 stops, 3 openings and entrance and exit at same side and suitable for travel height of 14.5 meter approximate. (Shaft Size 2600mm (width) x2200mm (depth) with door opening of 1100 mm (width) and 2100 mm (height) The equipment should be BMS compatible. All components, fabrication and procedures shall confirm to relevant IS standards/Code and complete in all respects as per technical specifications Test reports from NABL accredited testing labs for all constituent compounds shall be produced. Make: TK Elevators/Kone/Schindler/Johnson/Otis
Supply, installation, testing and Commissioning of minimum 13 passenger Lift at Academic Block at Palayad campus - Machine Room Less, Capacity/Weight 13 Passenger (884 Kg), Speed 1.0 MPS, electric traction type, Stainless steel (including freight & landing charges, applicable taxes and duties in country of origin and in India etc. except GST) and type suitable for operation on 415 V +/- 10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, electromagnetic brake system, Simplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman's switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. And at all floors with UP/DOWN direction, shaft wiring and lift lighting accessories, braille buttons, audio announcement along with recorded message as approved by Engineer in Charge, all accessories including Safe Landing Device (SLD), Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door as complete as required. The drives of elevator shall meet the requirements of IEEE 519/2014. PMSM traction motor (having efficiency equivalent to IE3 or better as in IS 12615) of machine room less elevator shall be of gearless type as per technical specifications. Having Automatic center/side opening stainless steel doors, Matte finish stainless steel car enclosure provided with stainless steel Handrails on three sides, 2 mm fluted SS flooring as applicable in accordance of following details 3 stops, 3 openings and entrance and exit at same side and suitable for travel height of minimum 15.5 meter approximate. (Minimum Shaft Size 2150mm (width) x 2000mm (depth)) with door opening of 1100 mm (width) and 2100 mm (height) The equipment should be BMS compatible. All components, fabrication and procedures shall confirm to relevant IS standards/Code and complete in all respects as per technical specifications Test reports from NABL accredited testing labs for all constituent compounds shall be produced. Expansion of two more floors in future shall be considered and bidder shall provide necessary provisions for the same in the lift system. Make: TK Elevators/Kone/Schindler/Johnson/Otis
Supply, installation, testing and Commissioning of minimum 20 passenger Lift at Academic Block at Palayad campus- Machine Room Less, Capacity/Weight 20 Passenger (1360 Kg), Speed 1.0 MPS, electric traction type, Stainless steel (including freight & landing charges, applicable taxes and duties in country of origin and in India etc. except GST) and type suitable for operation on 415 V +/- 10%, 3 phase, 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, electromagnetic brake system, Simplex mode operation, operating panel with luminous buttons, overload warning indicator, battery operated alarm bell, LED type emergency light, infrared ray sensing door protection for full height, reverse phase relay on controller, fireman's switch at initial landing floor, LCD/LED car positions and direction indication in car and landings. And at all floors with UP/DOWN direction, shaft wiring and lift lighting accessories, braille buttons, audio announcement along with recorded message as approved by Engineer in Charge, all accessories including Safe Landing Device (SLD), Automatic Rescue Device (ARD) with dry maintenance free sealed batteries and Manual Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door as complete as required. The drives of elevator shall meet the requirements of IEEE 519/2014. PMSM traction motor (having efficiency equivalent to IE3 or better as in IS 12615) of machine room less elevator shall be of gearless type as per technical specifications. Having Automatic center/side opening stainless steel doors, Matte finish stainless steel car enclosure provided with stainless steel Handrails on three sides, 2 mm fluted SS flooring as applicable in accordance of following details 3 stops, 3 openings and entrance and exit at same side and suitable for travel height of minimum 15.5 meter approximate. (Shaft Size 2100mm (width) x2950mm (depth) with door opening of 1100 mm (width) and 2100 mm (height) The equipment should be BMS compatible. All components, fabrication and procedures shall confirm to relevant IS standards/Code and complete in all respects as per technical specifications Test reports from NABL accredited testing labs for all constituent compounds shall be produced. Expansion of two more floors in future shall be considered and bidder shall provide necessary provisions for the same in the lift system. Make: TK Elevators/Kone/Schindler/Johnson/Otis
Description of Work / Item(s)
Amount
Lift - CAMC
Supply, installation, testing and Commissioning of minimum 20 passenger Lift (4 stops, 4 openings,(Shaft Size 2350mm (width) x3000mm (depth)) at Seminar Complex at Thavakkara campus, Kannur University - CAMC Rate for each lift in Rupees/Year
1st year (Free of Cost)
2nd year (Free of Cost)
3rd year (Free of Cost)
4th year
5th year
Supply, installation, testing and Commissioning of minimum 13 passenger Lift (3 stops, 3 openings (Shaft Size 2600mm (width) x2200mm (depth) ) at Academic Block at Mangattuparamba campus, Kannur University- CAMC Rate for each lift in Rupees/Year
1st year (Free of Cost)
2nd year (Free of Cost)
3rd year (Free of Cost)
4th year
5th year
Supply, installation, testing and Commissioning of minimum 13 passenger Lift (3 stops, 3 openings, (Shaft Size 2150mm (width) x2000mm (depth)) at Academic Block at Palayad campus, Kannur University - CAMC Rate for each lift in Rupees/Year
1st year (Free of Cost)
2nd year (Free of Cost)
3rd year (Free of Cost)
4th year
5th year
Supply, installation, testing and Commissioning of minimum 20 passenger Lift (3 stops, 3 openings, (Shaft Size 2100mm (width) x2950mm (depth)) at Academic Block at Palayad campus, Kannur University - CAMC Rate for each lift in Rupees/Year
1st year (Free of Cost)
2nd year (Free of Cost)
3rd year (Free of Cost)
4th year
5th year
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
IFB.pdf
Tender Documents • 6.82 MB
BOQ_1356310.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .