Repairing of Fire Control Panel and Fire Fighting System of CWS-I Fire Pump at GC, CRPF, Rampur (Uttar Pradesh)

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot eater circulation as specified. 100mm dia

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of under ground water piping. (excluding, earth excavation, re-filling of soil, valves, strainers, gauges, flange and nut & bolt etc.) Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 , welded type , from minimum 5.40 mm thickness.M.S pipe 150mm dia.

Supplying, laying/welding/ fixing, of 150 mm sizes of heavy type M.S flange 16 mm thickness, including 8 Nos nut & bolt, 1 nos 150 mm rubber gaskit

Supplying, laying/ fixing, of 65/63 mm sizes of heavy type brass fire single hydrant coupling valve

Supplying and fixing, of fire fighting M.S double door hose box (size -600x600x500 mm) with glass fixing of including painting, filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.

Supply and fixing of L & T MNX 95 3 Poles contactor 95 Amp

supply and fixing of digital voltmeter/ampere meter for starter panel

Supply and fixing of L & T 3 pole MCCB 100-125 amp 36 kA Icu=Ics

supply and fixing of 2.5 sqmm copper lugs starter panel

supply and fixing of bus bars for starter panel

supply and fixing of LED panel indicator light

supply and installation Automatic high pressure cut off switch

supply and installation water level sensor switch