Building

Name of Work :-Construction of 100 Bedded Sub District Hospital with Compound Wall,RCC Road,MGPS & Fire Protection System at Village :Karjan Ta:

Karjan District Vadodara

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

In Figs In Words

Clearing and grubbing road including uprooting rank vegetation grass bushes, shrubs , Rupees Thirty Four Thousand Eight

1 1.60 sapling and trees girth upto 300mm removal stumps of trees cut earlier and disposal of 34889.38 Hundred Eighty Nine and Paisa Thirty Hectare

unserviceable (D) By mechanical means in area of thorny jungle. Eight Only

Excavation for foundation upto 1.5m depth including sorting out and stacking of useful Rupees Two Hundred Sixty Eight and

materials and disposing off the excavated stuff. Dense or hard soft soil Paisa Twenty Eight Only

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and Rupees Two Hundred Eighty Nine and

stacking of useful materials and disposing off the excavated stuff (B) Dense or Hard soil Paisa Ninety Two Only

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and Rupees Three Hundred Eleven and

stacking of useful materials and disposing off the excavated stuff (B) Dense or Hard soil Paisa Fifty Six Only

Filling in foundation and plinth with murrum or selected soil in layers of 20 cm. thickness Rupees Two Hundred Ninety Six and

including watering, ramming and consolidating etc. Complete. Paisa Twenty Nine Only

Filling in plinth with sand under floors including watering ramming, consolidating, and Rupees Four Hundred Seventy One

dressing etc. comp. and Paisa Sixty Nine Only

Applying general insecticide pest control treatment to floors, cupboards etc including

labour material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests

Consentration Weight 0.50 percent is recommended one litre chemical emulsion dillute Rupees Forty Six and Paisa Ninety

with 39 liter of water will give. Total dillute concrentration will be 40 litre inclusive of Five Only

one litre chemical emulsion appication 0.5 Litre chemical / Sqm of surface is

recommended as per I.S

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

Rupees Three Thousand Six Hundred

8 811.04 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 3656.13 cum

Fifty Six and Paisa Thirteen Only

Foundation and Plinth

Extra for providing and mixing water proofing material in Cement concrete in mix Rupees Forty Nine and Paisa Sixteen Ltr per Qtl of

proportion recommended by the manufacturers. Only Cement

Providing TMT Bar FE 550D reinforcement for R.C.C. work including bending, binding Rupees Seventy Nine and Paisa Thirty

and placing in position complete for all Floor Level Three Only

Providing and laying in position Ready Mixed M-300 grade concrete for einforced cement

conctere work , using cement content as per approved Design Mix anufactured in fully

automatic batching plant and transported to site of work in transit mixer for a lead up to

10 kms having continuous agitated mixer, manufactured as per mix design of specified

Rupees Four Thousand Seven

grade for reinforced cement concrete work including pumping of R.M.C. from transit

11 2279.89 4771.03 Hundred Seventy One and Paisa cum

mixer to site of laying, including the cost of centering shuttering finishing and excluding

reinforcement including cost of admixtures in recommended proportions as per IS:

to accelerate/ retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge. Without Fly Ash (Min cement

level as per latest IS 456 shall be maintained) (Cement level 410 kg ) for Footing/Raft

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and laying in position Ready Mixed M-350 grade concrete for reinforced

cement conctere work , using cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of work in transit mixer for a

lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from

Rupees Six Thousand Five Hundred

12 124.21 transit mixer to site of laying, including the cost of centering shuttering finishing and 6507.04 cum

Seven and Paisa Four Only

excluding reinforcement including cost of admixtures in recommended proportions as

per IS: 9103 to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in - charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 435kg )

for Columns up plinth level column

Providing and laying in position Ready Mixed M-350 grade concrete for reinforced

cement conctere work , using cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of work in transit mixer for a

lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from

Rupees Six Thousand Five Hundred

13 490.46 transit mixer to site of laying, including the cost of centering shuttering finishing and 6507.04 cum

Seven and Paisa Four Only

excluding reinforcement including cost of admixtures in recommended proportions as

per IS: 9103 to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in - charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 435kg )

for Columns above plinth level column

Providing and laying in position Ready Mixed M-350 grade concrete for reinforced

cement conctere work , using cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of work in transit mixer for a

lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from

Rupees Five Thousand Four Hundred

14 511.77 transit mixer to site of laying, including the cost of centering shuttering finishing and 5488.20 cum

Eighty Eight and Paisa Twenty Only

excluding reinforcement including cost of admixtures in recommended proportions as

per IS: 9103 to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in - charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 435 kg )

for Vertical surface -up to plinth level

Providing and laying in position Ready Mixed M-350 grade concrete for reinforced

cement conctere work , using cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of work in transit mixer for a

lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from

Rupees Five Thousand Four Hundred

15 291.39 transit mixer to site of laying, including the cost of centering shuttering finishing and 5488.20 cum

Eighty Eight and Paisa Twenty Only

excluding reinforcement including cost of admixtures in recommended proportions as

per IS: 9103 to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in - charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 435 kg )

for Vertical surface above plinth level

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and laying in position Ready Mixed M-300 grade concrete for reinforced

cement conctere work , using cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of work in transit mixer for a

lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from

Rupees Six Thousand Ninety Seven

16 357.30 transit mixer to site of laying, including the cost of centering shuttering finishing and 6097.38 cum

and Paisa Thirty Eight Only

excluding reinforcement including cost of admixtures in recommended proportions as

per IS: 9103 to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in - charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 410kg )

for Beam upto plinth level

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced

cement conctere work , including all lift & lead using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work

Rupees Seven Thousand Six Hundred

17 1710.01 including pumping of R.M.C. from transit mixer to site of laying, including the cost of 7681.66 cum

Eighty One and Paisa Sixty Six Only

centering shuttering finishing and excluding reinforcement including cost of admixtures

in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 380 kg ) For Beam up to all level.

Providing and laying in position Ready Mixed M-300 grade slab concrete for reinforced

cement conctere work , using cement content as per approved Design Mix manufactured

in fully automatic batching plant and transported to site of work in transit mixer for a

lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of

specified grade for reinforced cement concrete work including pumping of R.M.C. from Rupees Six Thousand Five Hundred

transit mixer to site of laying, including the cost of centering shuttering finishing and Ninety Three and Paisa Eight Only

excluding reinforcement including cost of admixtures in recommended proportions as

per IS: 9103 to accelerate/ retard setting of concrete, improve workability without

impairing strength and durability as per direction of the Engineer - in - charge. Without

Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 410 kg )

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced

cement conctere work , including all lift & lead using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work Rupees Eight Thousand Eight

19 1903.11 including pumping of R.M.C. from transit mixer to site of laying, including the cost of 8827.78 Hundred Twenty Seven and Paisa cum

centering shuttering finishing and excluding reinforcement including cost of admixtures Seventy Eight Only

in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 380 kg ) slab above plinth level up to all level.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced

cement conctere work , including all lift & lead using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work

Rupees Seven Thousand Six Hundred

20 35.45 including pumping of R.M.C. from transit mixer to site of laying, including the cost of 7622.80 cum

Twenty Two and Paisa Eighty Only

centering shuttering finishing and excluding reinforcement including cost of admixtures

in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 380 kg ) Lintel for all level.

Providing and laying in position Ready Mixed M-250 grade concrete for reinforced

cement conctere work , including all lift & lead using cement content as per approved

Design Mix manufactured in fully automatic batching plant and transported to site of

work in transit mixer for a lead up to 10 kms having continuous agitated mixer,

manufactured as per mix design of specified grade for reinforced cement concrete work

Rupees Seven Thousand Six Hundred

21 25.00 including pumping of R.M.C. from transit mixer to site of laying, including the cost of 7681.66 cum

Eighty One and Paisa Sixty Six Only

centering shuttering finishing and excluding reinforcement including cost of admixtures

in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as per latest IS 456 shall be

maintained) (Cement level 380kg) for Chhajjas for all level.

Providing and laying in position Ready Mix M-250 grade concrete for reinforced cement

concrete work, including all lift & lead using cement content as per approved design Mix

manufactured in fully automatic batching plant and transported to site of work in transit

mixer for lead up to 10 kms having continous agitated mixer, manufactured as per mix

design of specified grade for reinforced cement concrete work including grade for Rupees Six Thousand Five Hundred

22 66.02 reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of 6547.43 Forty Seven and Paisa Forty Three cum

laying and the cost of centering shuttering finishing and excluding reinforcement Only

iincluding providing and mixing admixture in recommanded proportions as per IS :

to accelerate/ retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer In Charge , Without Fly Ash (Cement level

380 Kg.)for Stair Case up to all level.

Extra for additional height of propping and centering where the height of propping and

Rupees Four Hundred and Paisa Ten

23 13817.00 centering exceeds 4.O M between supporting floor to ceiling including temporary brick or 400.10 sqm

stone pillars for supporting as required. (i)Height more than 4.0 M.and upto 5.0 M.

Brick work using common burnt clay building bricks having crushing strength not less

Rupees Four Thousand One Hundred

24 279.00 than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5 (1- Cement : 5 -fine 4153.07 cum

Fifty Three and Paisa Seven Only

sand)(B) Conventional

Brick work using common burnt clay building bricks having crushing strength not less

than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine Rupees Four Thousand One Hundred

sand)(B) Conventional. Extra for brick work in superstructure above floor two level Sixty Three and Paisa Five Only

Item No. 1(6.12) (B) Conventional

Masonary work using Aerated light weight concrete block having crushing strength not Rupees Five Thousand Three

26 2770.34 less than 35 kg/sqcm for super structure above plinth level upto floor two level in cement 5372.49 Hundred Seventy Two and Paisa cum

mortar 1:5 ( 1cement : 5 fine sand ) complete as per Technical Specification Forty Nine Only

Rupees Forty Two and Paisa Two

27 400.00 Providing throating or plaster drip and moulding to R.C.C. chhajja 42.02 rmt

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Provinding and fixing chicken wire mesh of gauge 0.18mm and 200 mm wide with

Rupees Three Hundred Three and

28 3218.00 necessary screws and nail at joints cracks of brick work R.C.C work as per drawing and 303.00 sqm

Zero Paisa Only

specification and direction of Engineer incharge.

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and

prepolished) Granite of any colour and shade as per selection of client for wall lining

(veneer work), /bands 200mm wide backing filled with a grout of average 12 mm thick in Rupees Six Thousand One Hundred

29 982.00 polymer modified adhesive mortar including secured to the backing by means of cramps, 6113.77 Thirteen and Paisa Seventy Seven sqm

hold fastners ,copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in Only

stone wall lining in adhesive mortar including making the necessary chases complete in

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and

prepolished) machine cut Granite of any colour and shade as per selection of client for

kitchen platforms, vanity counters, window sills , facias and similar locations of required

Rupees Three Thousand Two

size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4

30 28.00 3294.24 Hundred Ninety Four and Paisa sqm

(1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching

Twenty Four Only

pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to

give high gloss finish, providing opening of required size & shape for wash basin/sink

etc. complete at all levels.

Providing and Fixing of Hollow metal door at all levels from ISO 9001-2000 certified

Manufacturer. Pressed Galvanised steel Single /Double leaf to required sizes which

consists of frame, shutter, infill and finish as detailed below and conforming to IS

with or without View Glass.

Door frame shall be Single rebate profile of size 100 x 58 mm made out of 1.20 mm thick

galvanised steel sheet (18 gauge). Frames should be Mitered and field assembled with

self tabs.Frames should be provided with back plate bracket and anchor fasteners for

installation on a finished plastered masonry wall opening. Once frame installed should be

grouted with cement slurry if recommended.

Door leaf shall be 47 mm thick fully flush double skin door with or without vision lite.

Rupees Nine Thousand One Hundred

31 234.00 Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel 9150.30 sqm

Fifty and Paisa Thirty Only

sheet. The internal construction of the door shall have reinforcements for receiving

appropriate hardware. The infill material shall be resin bonded honeycomb core. All

doors shall be factory prepped for receiving appropriate hardware. The edges should be

interlocked with lock seam. For pair of doors astragals will be provided as required. View

Glass of various sizes as shown in Door Schedule shall be provided.The glass should be

mm clear toughnened glass.

All door shall be factory made and rate shall include installation, hardwares like hinges,

door closer,Vision Panel 300mmx 200mm, Glass, Pull Handle 22x300MM, Dead bolt with

Pincyclinder with BSKO fixed partitation glass coordinator etc. as desired with necessary

reinforcement and direction of Engineer in charge.

Providing and fixing Decorative type 35 mm Thick flush door Shutters solid core

construction with frame of first class hard-wood with cross band and face veneer Or

Rupees Three Thousand Nine

32 338.00 plywood face panels with teak wood Frame 12cm X 7cm Size including anodised 3950.11 sqm

Hundred Fifty and Paisa Eleven Only

alluminium fixtures and fastenings (as Per requirement) including primer Coat of

approved quality and two coats of oil Painting etc Complete.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing & fixing in position partly fixed and partly openable standard extruded

Aluminium door of Domal with coloranodized hollow section frame of approved shade &

pivoted double shutter fabricated from alluminium standard section forouter frame size

101 mm x 44.5 mm (of app. Wt. 1.2 kg / Rmt)

and door styles and toprial of alluminium section size 47.5mm x44.5 mm (of app. Wt.

kg/ Rmt) Bottom rail & lockrail for door of size 114mm x 44.5mm (of app. Wt Kg./Rmt) Rupees Five Thousand Two Hundred

33 70.00 and providing rubber gasket and glazing chips around the glassallover including 5226.75 Twenty Six and Paisa Seventy Five sqm

providing hEachvy handle, hEachvy lock,bracket, stoppers,Aldrop (Color anodised) 5 mm Only

th. transparent float glass of copper tint (Structural Glass) fixed with rubbergasket and

x 17 mm size Glasing Clip same in Bottom Portionwith providing 9 mm thick decorative

water proof Both side

prelaminataed pressed wood based board with fixing Glasingclips 19 X 17 mm including

all required materials labours andequipments as per detailed drwg. as directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

plain flush door shutter of required size comprising of virgin polymer of K value 58-60

(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice

husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)

Rupees Three Thousand Nine

having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)

34 82.00 3914.07 Hundred Fourteen and Paisa Seven sqm

& 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity

N/mm2 and resistance to spread of flame of Class A category with property of being

termite/borer proof, water/moisture proof and fire retardant and fixing with stainless

steel butt hinges of required size with necessary full body threaded star headed counter

sunk S.S screws, all as per direction of Engineer-In Charge. 35 MM

Supply & Fixing of Lead Lined Clean room doors frames and shutters made of Skin pass

galvanized Iron sheet (Conform to Base Steel as per IS 513 “D” Quality, Galvanized as per

IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr).with powder coating of thickness 60-

65 Microns, frame of 1.60mm thick galvanized steel sheet (Conform to IS 277) formed to

Single/double rebate profile of size 100mm X 58mm/ 143x58mm, door frames with a

single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends

on radiation level, the shutter with 1.2 mm thick Galvanized Steel Sheet (Conform to IS

277) formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam Rupees Twelve Thousand Nine

35 15.00 joints at stile edges with a single / multi Layer of Lead sheet varying thickness from 3mm 12904.27 Hundred Four and Paisa Twenty sqm

/1mm to 2mm depends on radiation level, the lead sheets extend the full width and Seven Only

height of the door, Lead thickness is equal to the shielding in the adjacent wall, the door

frames and door shutters are coated with polyester powders of Pure polyester/ epoxy

polyester or polyurethane powder for powder coating of thickness 60 – 65 microns,

coated with Zinc Phosphate Primer to receive any paint on site or finished with

Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch

resistance and durability, hardware with Stainless Steel Ball Bearing Butt Hinges 3 mm

thick fixed flush to the frame and shutter etc complete for finished item

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and fixing of medium duty hollow metal fire rated doors as per IS 3614:

for 120min integrity only.Pressed galvanized steel confirming to IS 277 with the following

specification. Recommended fire door shall be tested to IS 17518 (Part 1) : 2022 / ISO

3008-1: 2019 from CBRI lab and manufactured in ISO 9001: 2015 certfied company for

quality management. ISI labled fire door shall be with fire rated hardware and vision

panel all as a complete assembly and shall not be more than 34kg/Sqmt in weight. Proper

label confirming the type of door and the hourly rating is mandatory. NOTE- Doors tested

in latched condition cannot be replaced with unlatched doors (Deadbolt & Handle) in

actual site condition. Need independent testing for both latched and unlatched doors. Ref

Page No-8 & 10, Sec: 7.2.9 & 7.3.6 of Builder’s Hardware IS3614:2021. Door frame shall

be single rebate grooved profile of size minimum 125 x 55mm made out of 1.20mm

(18gauge) minimum thick galvanized steel sheet. Frames shall be mitered and field

assembled with self tabs. Frames to have inbuild grooved sealing system for taking fire Rupees Twelve Thousand Eight

36 246.00 rated EPDM seals. All provision should be mortised, drilled and tapped for receiving 12813.87 Hundred Thirteen and Paisa Eighty sqm

appropriate hardware. Frames should be provided with back plate bracket and anchor Seven Only

fasteners for installation on a finished plastered masonry wall opening. Frames shall be

filled with fire rated puff (paid extra).Door leaf shall be 46mm thick fully flush double

skin door, sandwiched panel un-insulated with or without vision lite. Door leaf shall be

manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal

construction of the door should be rigid reinforcement pads for receiving appropriate

hardware. The infill material shall be honeycomb core. All doors shall be factory prepped

for receiving appropriate hardware and provided with necessary reinforcement for

hinges, locks, and door closers. The edges should be interlocked with a bending radius of

1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for

both active and inactive leaf. Vision lite wherever applicable shall be maximum 150 x

750mm (or max 0.12sq.mt) with clear borosilicate fire rated glass of 6mm. Glass shall be

fixed with suitable gasket and with clip-on arrangement.Door and frames shall be

Providing and fixixng of 6mm thick decorative compact HPL laminate as per EN 438-

6Type EDS ( Exterior Durable Standard)/ EGS(External General Standard) external wall

clading using specially treated acrylic resins under high pressure and temperature and Rupees Three Thousand Nine

37 37.80 hardened into sheets, thus providing all weather protection and UV resistance on an 3988.49 Hundred Eighty Eight and Paisa Forty sqm

aluminium powder coated sub structure of aluminium cube chanel having thickness Nine Only

50x25x1.6mm at corner and 75x25x1.6mm at junction of two panels complete as per

manufacturers specifications and direction of engineer in charge.

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint and two or more coat synthetic

Rupees Nine Thousand One Hundred

38 547.79 enamel paint . (A)In beams and joists, channels angles Tees, flats, with connecting plates 9108.48 qtl

Eight and Paisa Forty Eight Only

or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Supply and installation of polycarbonate multilayered system, a complete assembly of

extruded multilayer UV protected polycarbonate panels incorporated into a complete

system. Co-extruded UV protected polycarbonate panel system of min 18 mm thick panel

of 1200 mm width. Panels shall have six –seven layers with opaque and translucent

clear combination as per required lux level with all fixing accessories to ensure best

performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be

manufactured with vertical offset standing seam at both sides of the panel. Panels shall

be fixed on Purlin with snap on connectors with grip lock locking mechanism and will be

secured on MS structure (will be paid Separately) with 3 numbers self drilling screws &

trapezoid SS fasteners holding the base of the standing seam offering best stability having

Rupees Four Thousand Nine Hundred

39 343.00 a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005. 4985.36 sqm

Eighty Five and Paisa Thirty Six Only

Panels to satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage

on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per

ASTM G 155.Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units

when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall

not be more than 2.0 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional

End cap / Aluminium U / F Profile / Glazing Bar (mill finish) for ends as required. Panel

shall be fixed over M S structural steel / MS purlin (paid separately) conforming to the

detail technical specifications as per approved architectural drawings. Trained and

factory authorized labour with supervision to complete the entire panel installation as

per drawing & direction of the engineer in charge.

Fabricating, supplying and fixing in position S.S. Railing for staircase and balcony with

Rupees Three Thousand Fifty Nine

40 1114.00 brush finish and 304 grade as per Indian Standrd and detailed drawing including 3059.29 rmt

and Paisa Twenty Nine Only

grinding, cleaning and filling the welded spots with S.S. finish.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths

inter-locked together through their entire length and jointed together at the ends by end

locks mounted on specially designed

Rupees Four Thousand Five Hundred

41 113.00 pipe shaft with bracket plates, guide channels and arragements for inside and outside 4546.01 sqm

Forty Six and Paisa One Only

locking with push-pull operation including the cost of hood cover and spring etc.

complete. (B) Shutters having width

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse

Rupees One Thousand Four Hundred

42 5612.00 sand) laid over and jointed with epoxy grout mirror polish, mixed with pigment to match 1452.51 sqm

Fifty Two and Paisa Fifty One Only

the shade of slab including rubbing and polishing etc. complete.

(A) 28-30 mm thick

Providing and laying polished kota stone slab 20- 25mm thick in risers of steps,skirting

Dedo and pillars laid with cement based high polymer modified quick set tile adhesive Rupees One Thousand Five Hundred

(water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of Forty Nine and Paisa Sixty Eight Only

joints complete.

P & L 24" x 24" vitrified 10 mm thick tile flooring over 20 mm (average) base of cement

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by Rupees One Thousand Four Hundred

44 1571.00 adhesive material including dismentaling of existing flooring and jointed with color 1432.78 Thirty Two and Paisa Seventy Eight sqm

cement slurry including finised with flush pointing & cleaning the surface etc. complete Only

Providing and laying Vitrified tiles 10 mm thick , 36'' x 36'' in flooring treads of steps and Rupees One Thousand Five Hundred

45 1333.31 landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) 1521.73 Twenty One and Paisa Seventy Three sqm

finishing with flush pointing in white cement Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of

0.70 kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin Rupees Two Hundred Sixty One and

per kg), including filling / grouting and finishing complete as per direction of Engineer-in- Paisa Ninety Only

charge. Size of Tile 600x600 mm

Providing and laying Vitrified tiles 10 mm thick , 24'' x 24'' in skrting risers of steps and

Rupees One Thousand One Hundred

dedo laid with cement based high polymer modified quick set tile adhesive (water based)

47 133.00 1169.98 Sixty Nine and Paisa Ninety Eight sqm

conforming to IS: 15477, in average 6 mm thickness, including grouting of joints

Providing and laying Vitrified tiles 10 mm thick ,36"x36" in skrting risers of steps and

Rupees One Thousand Five Hundred

dedo laid with cement based high polymer modified quick set tile adhesive (water based)

48 133.00 1577.32 Seventy Seven and Paisa Thirty Two sqm

conforming to IS: 15477, in average 6 mm thickness, including grouting of joints

Providing and laying coloured glazed tiles of the size 300 mm x 450 mm x 8 mm in

Rupees One Thousand Four Hundred

skirting, risers of steps and dedo laid with cement based high polymer modified quick set

49 9065.00 1452.79 Fifty Two and Paisa Seventy Nine sqm

tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness,

including grouting of joints complete. (rate include of Tile Bonder in stand of cement)

Providing and laying Chequered precast concrete tiles 22 mm. thick with aggregate of

sizes upto 6 mm. in floors, treads of steps and landings on 20 mm. thick bed of C.M. 1:6 (1

Rupees Five Hundred Forty One and

50 2023.00 cement: 6 sand) or like mortar 1:1.5 (1 Lime putty, 1.5 coarse sand) jointed with neat 541.21 sqm

Paisa Twenty One Only

cement slurry with pigment to match the shade of tiles. (B) Dark Shades Using Ordinary

Cutting holes in RCC wall , slab by diamond core cutting machine upto 150mm dia for

Rupees Three Hundred Eighty Six and

51 120.00 passing drain pipes etc and repairing the hole after insertion of drain pipe etc with 386.88 each

Paisa Eighty Eight Only

Providing and laying cement concrete flooring in panels made with 4mm thick glass strips

Rupees Three Hundred Twenty Three

52 705.00 , 1:2:4 (1- cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid in 323.00 sqm

and Zero Paisa Only

one layer and finished with a floating coat of neat cement. (A) 40mm thick.

Providing & laying Light & Dark Colored Polisehd /Honed finish Granite slab (16-18mm

thick) flooring For Staircase Tread,Landing over 20 mm (average) thick base of Cement

Mortar (1-Cement : 6-Sand) using cementitious Adhesive Materials as per EIC instruction.

Rupees Two Thousand Six Hundred

Granite slab shall be laid and jointed with grey cement slurry. The size of granite should

53 1432.00 2628.62 Twenty Eight and Paisa Sixty Two sqm

be in full leght of Riser and Tread as per design. Rates are including rubbing, polishing

Moulding /Rounding of edges, making two lines of Grooves on each tread for antisleep,

laying and removing of floor protection sheet etc. complete. (work for all the floor

Providing and Installation of 2mm thick Linoleum Sheet Flooring 2.0m wide & 32 mtr

length. Linoleum flooring should be permanent bacteriostatic in nature and betadine

stain resistant through top shield2. The entire surface shall consist of a homogeneous

mixture of linseed oil, rosin, wood flour, limestone flower based pigments onto a jute

backing. Colors and pattern detail shall be dispersed throughout the thickness of the rolls Rupees One Thousand Five Hundred

and shall conform to flammability Class Cfls 1 as per EN 13501-1; slip resistance of R9 as Forty Nine and Paisa Sixty Eight Only

per DIN 51130; Coefficient of friction of class DS as per EN13893 and impact sound

reduction <4dB as per ISO 717-2. It I suitable for the following class of use as per EN

Industrial-General. The cost of vinyl coving of 30mm-40mm dia and capping of vinyl for

skirting areas is included.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and fixing conductive vinyl flooring of 2mm thick homogeneous flooring with

veined surface pattern and non directional ship texture as per EN649. The tile size

should be 615mm x615mm. The floor should be residual indentation of 0.035mm as per

EN 433, the light fastness>6 as per ISO105-B02 and electrical resistance should be

Rupees Two Thousand Six Hundred

55 574.00 5x104<R<106 Ω as per EN1081 for EC. The product should also confirm to Class Bfl-s1 in 2636.96 sqm

Thirty Six and Paisa Ninety Six Only

flammability test as per EN13501-1,slip resistance of R9as per DIN 51130, dynamic

coefficient of friction with class DS as per EN13893. The wear group of sheet is M as per

EN 660-2. Flooring should have excellent chemical resistanceas per EN423.The joints to

be welded with hot welding coils.

Providing and application of self levelling compound in the average thickness 3-4mm

with two coats of primer of approved manufacturer in the packaging of 25 kg bags,The Rupees Five Hundred Ninety Two and

work shall be carried out as per manufacturers specifications and as per direction of Paisa Forty Two Only

Engineer in charge.

Providing and laying tactile tile (for vision impaired persons as per standards) of size

300x300x9.8mm having with water absorption less than 0.5% and conforming to

IS:15622 of approved make in all colours and shades in for outdoor floors such as Rupees One Thousand Seven

57 184.00 footpath, court yard, multi modals location etc., laid on 20mm thick base of cement 1709.83 Hundred Nine and Paisa Eighty Three sqm

mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the Only

joints with white cement mixed with matching pigments etc. complete as per direction of

Engineer-in-Charge.

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight

calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel

sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required length and of size 24x38 mm made from

0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size

24x28 mm made out of 0.33 mm (Minimum) sheet,1200 mm long spaced between

main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross

‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be

inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm,

resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of Rupees One Thousand Six Hundred

size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl Seventy Four and Paisa Fifteen Only

plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval

and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture

in the grid, including, cutting/ making opening for services like diffusers, grills, light

fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with

12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised

steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main

‘T’, bottom exposed with 24 mm of all Tsections shall be prepainted with polyster baked

paint, for all heights, as per specifications drawings and as directed by Engineer-in-

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats

of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre

to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long

with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre

to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed

in a direction perpendicular to G.I. intermediate channel with connecting clips made out

of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter Rupees Six Hundred Six and Paisa

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the Ninety Five Only

perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre,

with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to

ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm

at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square

edges of the board with recommended jointing compound , jointing tapes , finishing with

jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats

of primer suitable for board, all as per manufacturer’s specification and also including the

cost of making openings for light fittings, grills, diffusers, cutoutsmade with frame of

perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick

tapered edge gypsum moisture resistant board

Providing & fixing Armstrong Vertical Linear Baffle Ceiling made out of Aluminum

Extrusion in Aluminum alloy grade 6063. The baffle blade shall be in size of 100x 50mm

in WHITE/BLACK/WOOD GRAIN finish – Pradoo & Cabrueava. The baffle blade shall be Rupees Five Thousand One Hundred

suspended using Slotted U-profile at on-center spacing . Longer lengths of Baffle to be Thirty Six and Paisa Fifteen Only

connected by Baffle Joiner and the ends to be fixed with End caps.

Baffle Ceiling 200mm c/c.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T"

runner with suitably spaced joints to get required length and of size 24x38 mm made

from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T"

of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced

between main "T" at 600 mm center to center to form a grid of 1200x600 mm and

secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick

(minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of

600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of

approved texture in the grid including, required cutting/making, opening for services like Rupees One Thousand Six Hundred

diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be Twelve and Paisa Sixty Seven Only

suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling

with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to

center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-

painted with polyester paint, all complete for all heights as per specifications, drawings

and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global

white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I

sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically

polyester powder coated of thickness 60 microns (minimum), including factory painted

Providing 10 mm thick Cement Plaster in single coat on brick/concrete wall/Ceiling for

interior plastering at various level as below finished even and smooth in(i) Cement

Rupees Two Hundred Twenty Nine

62 9282.00 mortar 1:3 (1-cement :3- sand) as required to receive specified architectural finish (like 229.15 sqm

and Paisa Fifteen Only

Grooves, pattern if any, drip mould etc.) to correct line, plumb .etc this item shall be

including all heights and levels

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or

Rupees Two Hundred Ninety Eight

63 22687.90 half brick walls for interior plastering upto floor two level and finished even and smooth 298.74 sqm

and Paisa Seventy Four Only

in (i) Cement mortar 1:3 (1-cement:3-sand)

20mm thick sand faced cement plaster on walls upto height10 metres above ground level

Rupees Three Hundred Fifty Seven

64 12586.15 consisting of 12mm thickbacking coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 357.46 sqm

and Paisa Forty Six Only

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Applying two coats of putty & two coats of primer of approved brand and manufacture on

Rupees Forty and Paisa Fifty Nine

65 30877.90 new wall surface to give an even shade including thoroughly brushing the surface free 40.59 sqm

from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (Three coats) with plastic emulsion paint of approved brand & manufacture

Rupees One Hundred Twenty Two

66 30877.90 on under coated wall surface to give an even shade including thoroughly brushing the 122.40 sqm

and Paisa Forty Only

surface free from mortar dropping and other foreign matter and sand papered smooth.

Applying priming coat over new steel and other metel surface after and including

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming Rupees One Hundred Two and Paisa

paint brushing red lead. & Painting two coats (excluding priming coat) on new steel and Sixty Six Only

other metal surface with synthetic enamel paint, brushing to give an even shade including

cleaning the surface of all dirt, dust and other foreign matter

Finishing walls with textured exterior paint of required shade :New work (Two or more

coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer Rupees One Hundred Eighty Nine and

applied @ 2.20kg/10 sqm.(Note : This item included exterior paint of required shade over Paisa Fifty Only

textured surface)

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Supply & fixing of wall guards/Crash Guard having vinyl snap on cover (lead free) and

bumper of 2mm thickness each and aluminum retainer of 2mm thickness that shall be

fabricated from 6063-T5 aluminum having high impact resistance with size 152 mm X 25 Rupees Two Thousand Four Hundred

69 1200.00 mm. The rigid vinyl profile shall resist an impact of 30.4 ft-lbs/ inch as per ASTM D-256- 2463.39 Sixty Three and Paisa Thirty Nine metre

90b and shall not support fungal or bacterial growth in accordance with ASTM G-21. The Only

system shall also confirm to class A fire rating and ASTM D-543 for chemical and stain

resistance. The color and design as per engineer incharge.

Applying breathable, non-reactive, antifungal, and water repellant Silane/Siloxane

chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved

brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 Rupees Ninety Four and Paisa Seven

(One part of approved chemical :12 Part of Turpentine oil), on the existing wall surface Only

with two or more coats to give uniform application of chemical on the surface, all

complete as per direction of Engineer-In-charge

Provding and Fixing of Mild Steel Hollow Profile Section of 1.25 mm thick for Door

Frames of size 125 mm x 65 mm with Heay Stainless Steel 4' Long Hinges (4 no Each

Side). The Frame Should be of Approved Shape, Single Rabate or double rebate as per site

Rupees Seven Hundred Twenty and

71 868.88 Requirement and as per instruction of Engineer incharge he Frame Sections of Doors 720.34 rmt

Paisa Thirty Four Only

shold be fixed with heavy hold fasts and with Necessary Cement Mortar (1:3;6) Filling

inside holow portion and also include two coat of Oil paint including red lead primer etc

complete After Fixing of Frame .

Providing and fixing window having extruded aluminum Colour anodized 27 x 65 section

of Domal (of Hindustan Section no: @wt.of 0.738 Kg/mt), horizontal Three track member

size 75mm x 45mm x 1.15mm (of @ Wt.1.30 Kg/mt), vertical member ofsize 75mm x

45mm x 1.15mm (of @ Wt. 1.30. Kg/mt) withsliding shutters of horizontal member size

66 mmx22mmx1.1mm (of @ wt.of 0.660 Kg/mt), with 5 mm th transparentbronze colour Rupees Six Thousand Nine Hundred

tinted float glass with powder coated aluminum Sixty Nine and Zero Paisa Only

fittings & fixtures and transparent silicon sEachlant glass fixing to frame as per details

and including MOSQUITO Shutterconststing of s.s. wire gage of avaerage width aperature

1.4 mm with wire of dia meter 0 .63mm necessary cutting and making

good etc. for window.

Providing & fixing in position standard extruded Aluminium Partition of Domal with

Colour anodized hollow section frame of approved shade & pivoted without shutter

fabricated fromalluminium standard section for outer frame size 101 mm x 44.5 mm (of

Rupees Five Thousand Three

app. Wt. 1.2 kg / Rmt) and using Glasing Clips of weight of0.15 kg per running meter and

73 192.00 5342.90 Hundred Forty Two and Paisa Ninety sqm

providing rubber gasket around the glass allover including providing 5 mm th.

transparent floatglass of copper/ gray tint (Structural Glass) fixed with transparent

silicon gasket and in bottom panel 12 mm thick prelaminated bothside partical board

including all required materials labours and equipments as per detailed drwg. as directed.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Supply of Aluminium Ventilated Façade / Louver System of approved colour consisting

of panel 50 mm wide x 50mm depth x 0.6mm thick panel length up to 5mtrs coil coated

on a continuous paint line double baked and roll formed from enameled corrosion

Resistance Aluminum Alloy AA3005 / AA5050 for higher strength and good Roll forming

characteristics. Panels shall be mounted in a module of 100 mm on a mullion profile

grooved (Slotted Fastening Profile) by means of Clamp, Locking Pop and Pop Rivet (Gap

will be 50 mm between two panels). Slotted Fastening Profile shall be fixed at 150 mm Rupees Six Thousand One Hundred

74 231.00 from panel ends and at a distance of maximum 1200 mm center to center across the 6199.38 Ninety Nine and Paisa Thirty Eight sqm

panel span and Slotted Fastening Profile shall be fixed to a suitable sub-structure by Only

means of Square Brackets.Paint Finish:Panel shall be stove enamelled and finished with

Luxacote, a patented special three layered coating system (consisting of first a conversion

layer of thickness 800-2000mg/sq mtr, a polyurethane basecoat of 16-20 microns, and a

special top coat of polyamide particles of 8-12 microns thick to provide excellent abrasion

and damage resistance) in a continuous coil coating process of the approved colour on the

exposed side and the reverse side with epoxy.

Designing, fabricating, testing, protection, installing and fixing in position semi(grid)

unitized system of structural glazing (with open joints) for linear as well as curvilinear

portions of the building for all heights and all levels including: (a) Structural analysis,

design and preparation of shop drawings for the specified designloads conforming to IS

875 part III (the system nust passed the proof test at 1.5 times design with pressure

without any failure including functional design of the aluminium sections for fixing

glasing panels of various thickness, aluminium cleats, sleeves and splice plates etc.

gaskets, screws, toggles, nuts, bolts, clamps etc. structural and weather silicone sealants,

flashings, fire stop (barrier)-cum smoke seats, microwave cured EPDM gaskets for water

tightness, pressure equalisation & drainage and protection against fire hazard including :

(b) Fabricating and supplying serrated M.S. hot dip galvanished/ aluminium alloy of

T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional

movement for achieving perfect vertically and proper fixing of structural glazing system

Rupees Nine Thousand Two Hundred

75 504.00 with the RCC/masonry/structural steel framework of building structure using stainless 9286.36 sqm

Eighty Six and Paisa Thirty Six Only

steel anchor fasteeners/bolts, nylon separator to prevent bimetallic contacts with nuts

and washers etc. of stainless steel grade 316, of the required capacity and in required

numbers. (c ) Providing and filling, two part pump filled, structural silicone sealant and

one part weather silicone sealant compatible with the structural silicone sealant of

required bite size in a clean and controlled factory/work shop environment, including

double sided spacer tape, setting blocks and backer rod, all of approved grade brand and

manufacturer, as per the approved sealant design, within and all around the perimeter

for holding glass. (d) Providing and fixing in position flashings of solid aluminium sheet

1mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal

the gap between the building structure and all its interfaces with curtain glazing to make

it water tight. (e) making provision for drainage of moisture/water that enters the curtain

glazing system to make it watertight, by incorporating principles of pressure equalization,

providing suitable gutter profiles at bottom (if required), making necessary holes of

Providing. Fabricating and fixing of Aluminium Composite Panel Signages with 3mm thick

ACP Sheet, using 25X25 mm MS pipe Frame of approved quality with anti rust coating,

back with G.I. and 5 Sides with ACP Sheet (alucobond or equivalent approved make), Rupees Ten Thousand Four Hundred

76 27.00 lettering to be done with 5mm Acrylic Sheet and Vinyl's( if Needed), backlit with (Philips 10486.83 Eighty Six and Paisa Eighty Three Sqm

or approved equivalent) Slim Lite Tube light Fittings, Acrylic Letters to Protrude out and Only

be lit, together with a timer for switching on and off automatically at night and day

including transportation and fixing at site as per the direction of the site engineer.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing, fabricating installation and fixing of LED LIT glass finish SS & acrylic letters

sides made of 20 gauge SS 304 sheet of required size and shape with neatly fabricated

joints properly welded and grinded with all corners rubbed and polished and top made of

77 449.96 white imported acrylic sheet with bright white LEDs inside with arrangement of screws 15.15 Rupees Fifteen and Paisa Fifteen Only sqcm

in the letters itself for mounting on the walls including cost of screws and fixing complete

as per directions of engineer. (max length and max height of each letter to be used for

Providing and fixing 0.60 meterwide and 0.80Metr high sand which type platform

including supplying and fixing granite stone 18 mm thick mirror polished stones in top Rupees Five Thousand Three

78 31.88 and side position and vertical strip at front over 25 mm thick polished kotah stone 5318.32 Hundred Eighteen and Paisa Thirty Sqm

platform fixing in top and sides and intermediates supports fixing with cement mortar Two Only

and adhesive and finishing etc complete.

Providing and fixing Godrej Type Steel cupboards in wall withsteel frames and shutters

Rupees Two Thousand Two Hundred

79 38.25 using 18 gauge M.S. steel sheet including necessary fixtures , fastening like locks handles, 2215.33 Sqm

Fifteen and Paisa Thirty Three Only

hinges with approved shade of sparay painting etc complete as directed

Providing and laying machine cut free edges machine polished Kota stone for shelves in

cupboard and walls in single piece (Miximum 150mm) 25 mm. th. including cutting Rupees Eight Hundred Twenty Four

grooves in walls and fixing the stone with neat cement slurry in true line and level as and Paisa Ninety Only

direct. including moulding where required

Providing and laying integral cement based treatment for water proofing on horizontal

surface at all depth below ground level for under ground structures as directed by

Engineer-in-Charge and consisting of : i) Ist layer of 22 mm to 25 mm thick approved and

specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement :

coarse sand) mixed with water proofing compound conforming to IS:2645 in the

Rupees One Thousand Two Hundred

81 3114.00 recommended proportion over the leveling course (leveling course to be paid separately). 1284.41 sqm

Eighty Four and Paisa Forty One Only

Joints sealed and grouted with cement slurry mixed with water proofing compound.

(ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with

water proofing compound in recommended proportions.

(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @

cudm/sqm thoroughly embedded in the 2nd layer. Using rough kota stone.

Providing and laying integral cement based treatment for water proofing on the vertical

surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed

with water proofing compound conforming to IS:2645 in recommended proportions with

a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the Rupees One Thousand Seven

82 2415.00 gaps with neat cement slurry mixed with water proofing compound and finishing the 1715.85 Hundred Fifteen and Paisa Eighty Five sqm

exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick Only

with neat cement punning mixed with water proofing compound in recommended

proportion complete at all levels and as directed by Engineer-in-charge : Using rough

Providing and laying water proofing treatment to vertical and horizontal surfaces of

depressed portions of W.C kitchen and the like consisting of : Ist course of appying

cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS

2645in recommended proportions including rounding off junction of vertical and

horizontal surface. IInd course of 20 mm cement plaster 1: 3 (1 cement :3 coarse sand) Rupees Six Hundred Fifty Two and

mixed with water proofing compound in recommended proportion including roudnign off Paisa Twenty One Only

junction of vertical and horizontal surface IVth course of 400 micron thick PVC sheet. (

Overlaps at joints of PVC sheet IIIrd course of applying blown or residual bitument

applied hot at 1.7 kg. per sqm of area. should be 100 mm wide and pasted to each other

with bitument @ 1.7 kg/sqm.)

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and laying chaina mosic water proofing treatment on terrace including

applying neat cement slurry 2.75 Kg./Sqm. Of cement admixed with water proofing

compound after cleaning the surface (b) laying cement concrete usig brick bats 25 to

mm size with 50% C.M. 1:5 (1 cement : 5 coarse sand) admixed with water proofing

Rupees Nine Hundred Thirty Seven

84 2889.00 compound over 20 mm thick layer of C.M. 1:5 to required slope including rounding of 937.28 sqm

and Paisa Twenty Eight Only

junction of walls and slabs (a) after two days of proper curing applying a second with

mm thick C.M. 1:4 and china mosaic tiling and finally finishing the surface with trowel

white cement slurry (e) after finishing the whole terrace shall be flooded with water for a

period of two weeks.

Preparation and consolidation of sub grade with power vibro road roller of 8 to 12 tonne

capacity after excavation earth to an average of 22.5cm depth dressing to camber and Rupees One Hundred Eighty Five and

consolidating with road roller including making good the undulations etc. and re-rolling Paisa Fifty One Only

the sub grade and disposal of surplus earth lead upto 50 metres.

Supplying and spreading of stone aggregate of an 40mm to 63mm Size machine cut of Rupees One Thousand Three

86 473.00 an approved quality frm quarry site to site of work including loading unloading with all 1355.10 Hundred Fifty Five and Paisa Ten cum

load and lift etc . Only

Rupees One Thousand Three

Supplying & Spreading of stone dust materials From out side borro area inqluding

87 473.00 1331.25 Hundred Thirty One and Paisa cum

loading -anloading with all load and lift etc comp.

Twenty Five Only

Providing and fixing pre-cast Rubber Dye/ steel Dye interlocking concrete block 60mm

thick with grade of concrete M300 pnumatic compressed/ vibrated mechanically and as

Rupees Seven Hundred Four and

88 800.00 per approved design Confirming to IS15658:2006 including 35mm Sand layer for 704.07 sqm

Paisa Seven Only

levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP

63-2018 etc. Complete.

Providing and ixing pre-cast concrete kerb stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of M200 grade concret as per approved design Rupees Three Hundred Ninety Four

and including excavation for fixing in proper line and level ,filling the joint with C:M and Paisa Fifty Nine Only

1:3(1cement:3 fine sand) etc complete.

Providing and applying 2.5 mm thick road marking strips

(retro_x005f_x005f_x005f_x0002_reflective) of specified shade/ colour using hot

thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine

fitted with profile shoe, glass beads dispenser, propane tank heater and Rupees Six Hundred Thirty Three and

profile shoe heater, driven by experienced operator on road surface including cost of Paisa Seventy Two Only

material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign

material etc. complete as per direction of Engineer-in-charge and accordance with

applicable specifications.

Renovating lawns on 30cm good earh layer including weeding, cheeling the grass, forking

the ground, top dressing with sludge or manure, mixing the same with forked soil,

watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn Rupees One Hundred Thirty One and

free from weeds and fit for mowing and disposal of rubbish as directed, including Paisa Fifty Five Only

supplying good earth if needed but excluding the cost of sludge or manure (Good fertile

earh brought by contractor no extra payment made by owner)

Providing and laying trimix vaccum dewatering process controlled cement concrete M-

200 and curing complete excluding the cost of form work including using vaccum

Rupees Six Thousand Four Hundred

92 574.00 dewatering machine mechanical vibrator, mechanical floater & mechanical trowel for 6400.32 cum

and Paisa Thirty Two Only

finishing by mixer machine as directed including cutting groove & filling joint as

specialized etc. comp.

Providing erecting and fixing double coated ISI water tank of required capacity each with Rupees Three and Paisa Ninety Five

all necessary fittings andconnection etc. complete on terrace Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and fixing 0.70 Metre high fencing with M.S. Angle posts Y-section 40mm x

mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with seven Horizontan lines of Rupees Two Hundred Ninety and

galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixing the Paisa Ten Only

postsi n Wall with 0.15 M x 0.15.M x 0.23 M. block in C.C1:5:10 etc complete.

Providing and fixing coloured wash down water closet ( European type W.C. Pan) with

intergreval P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (

Rupees One Thousand Nine Hundred

95 39.00 cement :1 fine sand ) including providing and fixing plastic seat cover with C.P. brass 1965.16 each

Sixty Five and Paisa Sixteen Only

hinges and rubber butters and also providing jet wash facilities complete (Vetrified china

pattern in white colour)

Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm

Rupees Nine Hundred Seventy One

96 10.00 (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) 971.79 each

and Paisa Seventy Nine Only

Vitreous China.(I) Long pattern = White colour

Providing and fixing Handicap toilet consisting of 1 no. EWC with vitreous 10 litre

Rupees Forty Seven Thousand Two

capacity dual flushing system cistern with 1 no. hinged rail of 76 cm, 1 no. wash basin

97 5.00 47288.20 Hundred Eighty Eight and Paisa each

with all fittings and bottle trap, with one pair of mounting brackets and 4 nos. grab rails,

no. tower ring and 1 no. paper holder all complete as per the manufacturer's specification

Rupees Four Hundred Twenty Seven

98 36.00 Providing and fixing toilet paper holder.(A) C.P. Brass 427.99 each

and Paisa Ninety Nine Only

Rupees One Thousand Five Hundred

provdg. & Fixing urinal of approved quality incl. connection with trap and with integral

99 40.00 1596.28 Ninety Six and Paisa Twenty Eight each

longitudinal flush pipe. (A) Squating plate pattern white earthenware 550mm x 300mm.

Providing and fixining frameless urinal partition with 8 mm glass , full height upto 3 feet,

Rupees Four Thousand One Hundred

100 12.00 1 feet deep & SS fittings approved make all complete as directed by the Engineer-in- 4103.63 each

Three and Paisa Sixty Three Only

Providing and fixing white vitreous china wash basin under counter basin of size Rupees Three Thousand Eight

101 61.00 630x450mm, with including 32 mm CP brass waste coupling, including painting of 3806.69 Hundred Six and Paisa Sixty Nine each

fittings and brackets, cutting and making good the walls wherever required all complete Only

Providing and fixing CP brass auto closing system basin pillar tap of Jaquar PRS - 031 Rupees Two Thousand Fifty Two and

or Equivalent as approved by Engineer- In Charge Paisa Thirty Two Only

Providing and fixing chromium plated, bottle trap with necessary couplings of approved Rupees Two Hundred Ninety Five and

quality for wash basin Paisa Eighty Only

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including Rupees Two Thousand Three

104 1.00 cutting holes in walls and making good the same but excluding fittings. (C) Vitreous China 2326.66 Hundred Twenty Six and Paisa Sixty each

Sink.(i) 600mm x 450mm x 150mm size Six Only

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass

chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary

105 C.P. brass unions complete, including painting of fittings and brackets, cutting and making 0.00 Zero Paisa Only

the wall wherever required :

Rupees Five Thousand Five Hundred

57.00 Size 600x450x200 mm 5581.19 each

Eighty One and Paisa Nineteen Only

Rupees Sixty Seven and Paisa Ninety

106 58.00 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 67.91 each

Rupees Eighty Nine and Paisa Eighty

107 40.00 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. 89.83 each

Rupees Seventy Eight and Paisa

108 58.00 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 78.75 each

Seventy Five Only

Providing and fixing cast iron spigot and socket soil, waste and ventilating pipes of the Rupees Seven Hundred Forty One and

following nominal size.(B) 75mm dia. Paisa One Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and fixing cast iron spigot and socket soil, waste and ventilating pipes of the Rupees Eight Hundred Ninety Two

following nominal size.(C) 100mm dia. and Paisa Thirty Nine Only

Rupees Three Hundred Ninety Three

111 9.00 Providing and fixing in position cowel went to pipes.(B) 75mm dia. 393.04 each

and Paisa Four Only

Rupees Five Hundred Five and Paisa

112 16.00 Providing and fixing in position cowel went to pipes.(C) 100mm dia 505.17 each

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self

Rupees Six Hundred Thirty One and

113 97.00 cleaning design with C.I. screaed down or higned grating including cost of cutting and 631.02 each

making good the walls and floor 100mm inlet and 50mm outlet.(C) 100mm dia.

Painting two coats (excluding priming coat) on external surface of new rain water, soil,

waste and vent pipes and fittings with ready mixed bituminous brushing, black, Rupees Twenty One and Paisa Eighty

anticorrosive to give an even shade including cleaning of all dirt, dust and other foreign Six Only

matter. (B) 75mm dia.

Painting two coats (excluding priming coat) on external surface of new rain water, soil,

waste and vent pipes and fittings with ready mixed bituminous brushing, black, Rupees Twenty Seven and Paisa

anticorrosive to give an even shade including cleaning of all dirt, dust and other foreign Seven Only

matter. (C) 100mm dia.

Providing and fixing 125 mm square S/S grating (with or without hole)for floor or Rupees Two Hundred Ninety Three

Nahani trap. and Paisa Twenty Two Only

Providing and fixing C.P soap dispenser with all complete as directed by the Engineer-in- Rupees One Thousand One Hundred

Charge. Ninety Nine and Paisa Fifteen Only

Providing and fixing of 600mm long towel rail (SS-316 grade), all complete with Rupees One Thousand Six Hundred

required acceessories as directed by the Engineer-in-Charge. Forty Seven and Paisa Forty Six Only

Providing and fixing CP brass with soap dish holder with all complete as directed by the Rupees Eight Hundred Three and

Engineer-in-Charge. Paisa Thirty Nine Only

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. Rupees Three Hundred Thirty Eight

nominal bore tube fittings and clamps including making good the wall, ceiling and floor and Paisa Twenty Four Only

etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. Rupees Four Hundred Forty Seven

nominal bore tube fittings and clamps including making good the wall, ceiling and floor and Paisa Seventy Two Only

etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. Rupees Six Hundred Sixty and Paisa

nominal bore tube fittings and clamps including making good the wall, ceiling and floor Fifty Eight Only

etc. complete. [F] 50mm.

Rupees Fourteen Thousand Two

Providing and fixing stainless steel hand dryer (Heavy Traffic ) all complete as directed

123 10.00 14246.61 Hundred Forty Six and Paisa Sixty each

by the Engineer-in-Charge.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. Rupees One Hundred Seventy and

nominal bore tube fittings and clamps including making good the wall, ceiling and floor Paisa Thirty Six Only

etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. Rupees Two Hundred Eight and Paisa

nominal bore tube fittings and clamps including making good the wall, ceiling and floor Eighty Only

etc. complete. [B] 20 mm.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. Rupees Two Hundred Fifty Three and

nominal bore tube fittings and clamps including making good the wall, ceiling and floor Paisa Eighty Two Only

etc. complete. [C] 25 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. Rupees Three Hundred Thirty Eight

nominal bore tube fittings and clamps including making good the wall, ceiling and floor and Paisa Twenty Four Only

etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. Rupees Four Hundred Forty Seven

nominal bore tube fittings and clamps including making good the wall, ceiling and floor and Paisa Seventy Two Only

etc. complete. [E] 40mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. Rupees Six Hundred Sixty and Paisa

nominal bore tube fittings and clamps including making good the wall, ceiling and floor Fifty Eight Only

etc. complete. [F] 50mm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c

fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings

with one step CPVC solvent cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

Rupees One Thousand Four Hundred

130 40.00 65 mm dia nominal bore 1418.33 metre

Eighteen and Paisa Thirty Three Only

Rupees Six Hundred Ninety One and

131 20.00 80 mm dia nominal bore 691.64 metre

Paisa Sixty Four Only

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Rupees Two Hundred Eighty Two and

Each Paisa Sixteen Only

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted

Rupees Eight Hundred Seventy Two

133 60.00 on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass 872.76 each

and Paisa Seventy Six Only

screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden Rupees Six Hundred Sixteen and Paisa

plugs with C.P. brass scews.(B) 600mm x 20mm size Forty Two Only

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed

Rupees One Hundred Forty Six and

135 18.00 Gun metal wheel valve 20mm dia 146.51 each

Paisa Fifty One Only

Rupees Three Hundred Two and

136 14.00 Gun metal wheel valve 25mm dia 302.35 each

Paisa Thirty Five Only

Rupees Two Hundred Twenty Six and

137 10.00 Gun metal wheel valve 32mm dia 226.23 each

Paisa Twenty Three Only

Rupees Four Hundred Seventy Six

138 4.00 Gun metal wheel valve 40mm dia 476.87 each

and Paisa Eighty Seven Only

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed

Rupees Eight Hundred Seventy and

139 2.00 50 mm dia. nominal bore 870.04 each

Paisa Four Only

Rupees One Thousand Four Hundred

140 1.00 65 mm dia. nominal bore 1476.40 each

Seventy Six and Paisa Forty Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Supply ,Erection , Testing & Commissioning of Automatic water level control panel &

related accessories for pumping automation with consisting of automatic water level

controller , level sensor with stainless steel probe, motorized butterfly valve, motorized

valve controller with complete in all respect.

Rupees Twenty Thousand Four

5.00 upto 50 mm dia. nominal bore 20457.55 Hundred Fifty Seven and Paisa Fifty each

142 Providing and fixing Stainless steel braided connection pipe with brass unions :

Rupees Two Hundred Forty and

34.00 15 mm nominal bore 240.38 each

Paisa Thirty Eight Only

Rupees Four Hundred Seven and

143 198.00 C.P. Angle stop cock 15 mm Heavy duty with cap 407.42 each

Paisa Forty Two Only

Providing and fixing hand held ablution fitting (health faucet) with one meter long Rupees Five Hundred Eighty Two and

flexible tube and wall hook, all complete approved engineer-in-charge Paisa Three Only

Rupees One Thousand Two Hundred

Supply and fixing of 15mm CP brass 2 -Way Bib Cock with wall flange and suitable length

145 49.00 1288.76 Eighty Eight and Paisa Seventy Six each

CP brass extension pipe all of approved engineer-in-charge

Providing and fixing Sink Cock with swinging casted spout ( cat. No. LYR 38347 Rupees One Thousand Two Hundred

equivalent ) of approved quality Twenty Six and Paisa Fourteen Only

Supply Installation Testing Commissioning of water Cooler with all required accessories

to complete the job including appropriate Prefilter with its housing and Pipe at the inlet

of water cooler appropriate Level Sensor for Water Cooler for switching UV Lamp as

direction of Engineering in charge.The details as below:

Minimum Storage Capacity 80L, Minimum Cooling Capacity 150L/Hr,No of faucets 01+01

nos ( 1 Normal,1 Cool),Front Tray drain pipe system, Hermetically sealed reciprocating Rupees Thirty Eight Thousand One

147 6.00 compressor having R-134 a refrigerant,Cabinet Material Stainless steel AUG J1 38135.59 Hundred Thirty Five and Paisa Fifty each

grade,Stainless Steel Water Tank with float type sensor, Warranty on Cooler and other Nine Only

parts: Minimum 1 years,Supply Volatge-230 V AC,Make of the water Cooler- Voltas/ Blue

Star/ Aquaguard / Usha After installation the agency

should submit the test report of functioning of all its parts like Float Sensor,Cooling etc.

The Unit and its accessories should be leackage free during the warranty period,any

leackages found during warranty period agency should attend it on their own cost.

Supply, installation, testing and commissioning of solar water heating system of capacity

2000 ltrs suitable for following specifications and capacities, including electrical heater

backup complete with necessary storage tanks, insulation, GI piping, valves ,gaskets,

support brackets, CC foundation and accessories complete as required .

Technical specifications:

System output temperature - 60 degree C

The solar panels shall confirm to BIS - 12933 part- I

Circulation type / thermosyphon system

The stainless steel water tank made of stainless steel of 304 grade and 2mm thick, duly

insulated with 100mm thick rockwool of 48Kg /Cum density, duly cladded with

aluminium sheet of 24SWG thickness

Support stand made of 50x50x5mm angle iron on suitable 1:2:4 CC foundation block.

Rupees Three Lakh Fifty Nine

The GI pipes with accessories shall be insulated with 50mm thick rockwool of 48Kg/

2.00 359293.36 Thousand Two Hundred Ninety Three Set

cum, and duly cladding with aluminium sheet of 26 SWG thickness

and Paisa Thirty Six Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

SUBHEAD – Drainage

Supply and fixing HDPE double wall corrugated ( DWC ) I.S 16098 ( Part - 2 ) 3013 for

soil / waste pipe under ground drainage system with jointed with rubber ring with good

149 quality lubricant for fittings, inclusive of all necessary specials like bends, tees, offsets,

junctions, etc complete.

Rupees Four Hundred Fifty One and

a 110.00 150 mm diameter 451.25 metre

Paisa Twenty Five Only

Rupees Six Hundred Fifty Three and

b 50.00 200 mm diameter 653.40 metre

Paisa Forty Only

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water

Rupees One Thousand Two Hundred

150 20.00 tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) 1246.92 metre

Forty Six and Paisa Ninety Two Only

Square mouth traps.(B) 150mm x 100mm size P or R type

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-

Rupees Two Hundred Fifty Four and

151 200.00 pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends 254.89 metre

Paisa Eighty Nine Only

prepared for collar joints including testing of joints complete.(B) 150mm

Rupees Three Hundred Fifty Six and

152 50.00 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars

356.73 metre and butt ends prepared

17836.50for collar joints including testing of joint

Paisa Seventy Three Only

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone

Rupees Eleven Thousand Forty Two

153 15.00 aggregate 20mm nominal size) finished smooth complete including curing and festing (i) 11042.74 metre

and Paisa Seventy Four Only

Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm

diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg.

and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse

sand) (1) A type depth 0.90 Metre for 150mm diameter sewer.

(A) With 230mm thick walls of brick msonry using brick having crushing strength not less Rupees Thirty Thousand Two

154 200.00 than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (4) D type depth 30293.79 Hundred Ninety Three and Paisa metre

3.15 Metre for 150mm diameter sewer Seventy Nine Only

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part Rupees Five Hundred Twenty Two

thereof over item No.24.27 (I) for depth from 0.9M to 1.5M. and Paisa Ninety Six Only

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with Rupees Two Hundred Seven and

two coats of Anti-corrosive paint etc. complete. Paisa Sixty Six Only

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including Rupees Two Thousand Seventeen and

500mm x 450mm C.I. horizontal grating wih frame complete. Paisa Nineteen Only

Rupees Two Thousand Nine Hundred

158 18.00 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having crushing

2932.93 Thirty strength

Two andnot less

Paisa than 35Kg/Cm2

Ninety Three inmetre

C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal d

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the

Rupees Four Hundred Twelve and

3.00 25 mm nominal bore 412.54 each

Paisa Fifty Four Only

Providing and fixing of cast iron sluice valves ( with cap ) complete with bolts, nuts,

rubber insertions etc. ( the tail pieces if required will be paid separately):

100 mm diameter

Rupees Five Thousand Thirty Six and

2.00 Class II 5036.44 each

Paisa Forty Four Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts,

161 rubber insertion etc. complete ( The tail pieces, tapers etc if required will be paid

Rupees Seven Thousand Five

2.00 100 mm dia 7536.44 Hundred Thirty Six and Paisa Forty each

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling

Rupees Seven Hundred Fifty Nine and

a 35.00 65 mm dia nominal bore 759.83 meter

Paisa Eighty Three Only

Rupees Eight Hundred Eighty Two

b 35.00 80 mm dia nominal bore 882.80 meter

and Paisa Eighty Only

Providing and fixing HDPE pipes,PE-63 8kgf/cm2 to IS confirming IS 4984-1995 having

thermal stability for hot & cold water supply including all threaded fittings. This includes

jointing of pipes & fittings with one step HDPE solvent cement, trenching, refilling &

testing of joints complete as per direction of Engineer in Charge.

Rupees One Hundred Twenty Six and

a 35.00 25 mm nominal outer dia pipe 126.26 metre

Paisa Twenty Six Only

Rupees One Hundred Fifty Nine and

b 20.00 32 mm nominal outer dia pipe 159.27 metre

Paisa Twenty Seven Only

Rupees Two Hundred Twenty Seven

c 20.00 50 mm nominal outer dia pipe 227.53 metre

and Paisa Fifty Three Only

Rupees Eight Hundred Sixty Four and

d 20.00 100 mm nominal outer dia pipe 864.07 metre

Paisa Seven Only

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4

(1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside)

with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand :

164 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation

concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size )

and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick,

finished with a floating coat of neat cement complete as per standard design :

Rupees One Thousand Six Hundred

8.00 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 1688.64 each

Eighty Eight and Paisa Sixty Four Only

Boring/drilling fore well of required dia for casing/ strainer pipe, by suitable method

prescribed in IS: 2800 (part I), including collecting samples from difberent strata,

165 preparing and submitting strata chart/ fore log, including hire & running charges of all

equipments, tools, plants & machineries required for the job, all complete as per direction

of Engineer -in-charge, upto 90 metre depth below ground level.

All types of soil

Rupees Eight Hundred Thirty Nine

200.00 400 mm dia 839.66 metre

and Paisa Sixty Six Only

Boring/drilling fore well of required dia for casing/ strainer pipe, by suitable method

prescribed in IS: 2800 (part I), including collecting samples from difberent strata,

166 preparing and submitting strata chart/ fore log, including hire & running charges of all

equipments, tools, plants & machineries required for the job, all complete as per direction

of Engineer -in-charge,beyond 90 metre & upto 150 metre depth below ground level.

All types of soil

Rupees One Thousand Forty Nine and

50.00 400 mm dia 1049.57 metre

Paisa Fifty Seven Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric

Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of

required dia, conforming to IS: 4270, of reputed & approved make, including painted with

outside surface with two coats of anticorrosive paint of approved brand and manufacture,

including required hire & labour charges, fittings & accessories, all complete, for all

depths, as per direction of Engineer-in-charge.

Rupees Two Thousand Seventy and

200.00 200 mm nominal size dia having minimum wall thickness 5.40 mm 2070.13 metre

Paisa Thirteen Only

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric

Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel

threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS:

168 8110, of reputed and approved make, having wall thickness not less than 5.40 mm,

including painted with outside surface with two coats of anticorrosive bitumestic paint of

approved brand and manufacture, ncluding hire & labour charges, fittings & accessories,

all complete, for all depths, as per direction of Engineer -in-charge.

Rupees Two Thousand One Hundred

50.00 200 mm nominal size dia 2178.85 Seventy Eight and Paisa Eighty Five metre

Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in Rupees One Thousand Two Hundred

169 20.00 recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of 1279.49 Seventy Nine and Paisa Forty Nine Cum

Engineer-in-charge. Only

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the

Rupees One Thousand Three

170 20.00 recharge pit, over the existing layer of foulders, in required thickness, for all leads & lifts, 1303.60 Cum

Hundred Three and Paisa Sixty Only

all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of sizerange 1.5 mm to 2 mm in

Rupees One Thousand Three

171 20.00 recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as 1303.60 Cum

Hundred Three and Paisa Sixty Only

per direction of Engineer -in-charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing Rupees One Thousand Seven

172 20.00 gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all 1715.68 Hundred Fifteen and Paisa Sixty Eight Cum

complete as per direction of Engineer-in-charge. Only

Providing and fixing factory made precast RCC perforated drain covers, having concrete

of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four

Rupees One Thousand One Hundred

173 2.00 nos longitudinal & 9 nos cross sectional T.M.T. hoop fars, including providing 50 mm dia 1186.40 each

Eighty Six and Paisa Forty Only

perforations @ 100 to 125 mm c/c, including providing edge finding with M.S. flats of size

50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish

maximum rate of usable water yield without sand content (beyond permissible limit),

with required capacity air compressor, running the compressor for required time till well

is fully developed, measuring yield of well by “V” notch method or any other approved Rupees Nine Hundred Nineteen and

method, measuring static level & draw down etc. by step draw down method, collecting Paisa Fifty Three Only

water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all

complete, including hire & labour charges of air compressor, tools & accessories etc., all as

per requirement and direction of Engineer-in-charge.

Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of

175 tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size

Rupees One Thousand Nine Hundred

2.00 200 mm clamp 1943.78 Forty Three and Paisa Seventy Eight each

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assemfly

of tubewell as per IS:2800 (part I).

Rupees Three Hundred Three and

2.00 200 mm dia 303.05 each

Paisa Five Only

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming

to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for

177 hot & cold water supply, including all PP - R plain & brass threaded polypropylene

random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of

joints complete as per direction of Engineer-in-Charge.

Rupees Four Hundred Ninety One and

4.40 PN - 10 Pipe, 50mm OD (SDR-11 491.61 metre

Paisa Sixty One Only

STP / WATER TREATEMENT EQUIPMENT & SUPPLY PUMPS

Design, Construction ,Supplying, installing, testing & commissioning of Sewage Treatment

178 Plant of 50m3/day based on MBR technology (Excluding excavation, back filling &

disposal of surplus earth MS / Civil construction work) for the following duty:

Nature of Sewage - Domestic Sewage from Kitchen, Pantry and human waste for STP and

from lab fro ETP.

The sewage treatment plant shall include the following items: Screen Chamber,Oil &

Grease Trap,Reaction Tank,Clear Water Tank,Sewage equalization tank/sump,,Aeration

Tank,,Sludge Holding Tank,Air Blowers, Pump sets & other equipment including

submersible pumps in the drainage sump,Effluent,Sludge,,Tertiary Treatment,Irrigation,

Flushing & Soft water pumpsets,Inlet and Outlet connection to Treated water storage

Tanks,Electrical Control Panel & Cabling, earthing etc.,Piping, valves and Instrumentation

including level controllers, pressure gages, sensors, rotameters and indicating cum

recording meters for incoming sewage and outgoing treated effluents etc.,Contractor shall

ensure submission of detailed GA drawings (Plan & Section), P&I diagram, schematic

diagram for the above said components and equipment and additional component if so

required for the complete working of the STP /ETP. The following list of civil units shall

be in Client's Scope. However the size and design of the civil constructions required shall

be given and guaranteed for its efficacy by the contractor for which the contractor shall

take full responsibility, Bar screen pit, Oil & Grease Chamber,Equalisation Tank,Sewage

equalization tank/sump, Anoxic Tan,Aeration Tank,Sludge Holding Tank, Final Traeted

water tank,Drain Sump for STP room,The STP shall consist of following units but not

limited to these unit as may be required by the manufacturer's design.

The STP shall be designed based on the following parameters:

Daily average flow : 50 m3/Day

BOD5 : 50- 80 mg/l

S. Solids : 50- 80 mg/l

COD : 50- 80 mg/L

Oil & Grease : 20-30mg/L

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

ELECTRICAL INSTALLATION FOR SEWAGE TREATMENT PLANT Note : The mentioned

ratings are for estimation purpose it may change as per final technical submittal. The

Vendors are advised to quote as per actual. Design, fabrication, assembling, wiring,

supply, installation, testing and commissioning of motor control centre shall be fabricated

out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable

size angle iron, channel ‘T’ sections irons and /or flats wherever necessary. Cable gland

plates shall be provided on top as well as at the bottom of the panels. Panels shall be

treated with all anticorrosive process before painting as per specifications with 2 coats of

red oxide primer and final approved shade of powder coated paint. 2 Nos. earthing

terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall

also be provided in case of large panels. Approval shall be taken for each panel before

fabrication. Cadmium Plated hardware shall be used in fabrication of panels. Quoted rates

shall inclusive of cables, cable trays, control cabling, earthing (in accordance to

specification) with earthing from panel to each motor / equipment. MCC –1 (Sewage

Treatment Plant) Incoming 100 amps TPN MCCB with the following accessories: - 1 No

Rupees Twenty Three Lakh Forty

STP Describe as above item with complete in all respect.

1.00 2348250.00 Eight Thousand Two Hundred Fifty Job

and Zero Paisa Only

Supply, installation, testing & commissioning of electric driven main fire pump suitable

for automatic operation and consisting of following: complete in all respect as required.

Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of

kg/sp.cm. at highest and farthest oulet at specified flow of 2280 lpm at 88M. head

conforming to IS

179 Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for

operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal

foot mounted type with Class-'F' insulation, conforming to IS-325.

M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as

Rupees Three Lakh Forty One

2.00 Suitable cement concrete foundation duly plastered with anti vibration pads. 341953.68 Thousand Nine Hundred Fifty Three Set

and Paisa Sixty Eight Only

Supplying, Installation, Testing and Commissioning of diesel engine driven main fire

pump suitable for automatic operation and consisting of following: complete in all respect

Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of

kg/sp.cm. at highest and farthest oulet at specified flow of 2280 lpm at 88M. head

conforming to IS

Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant

BS & IS standard complete with auto starting mechanism, 12 volts/24 Volts electric

180 starting equipment, sealed maintenance free batteries, Diesel Tank, exhaust pipe

extended upto 1 m. outside pump house duly insulated with 50 mm. thick glass wool with

1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection

as per specification, stop solenoid for auto stop in the event of fault with audio

indications, painted with post office red colour etc. as required.

M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees Five Lakh Thirty Eight

1.00 Suitable cement concrete foundation duly plastered with anti vibration pads. 538905.93 Thousand Nine Hundred Five and Set

Paisa Ninety Three Only

Supplying, Installation, Testing and Commissioning of electric driven pressurisation

pump suitable for automatic operation and consisting of following: complete in all

respect as required.

Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller

with stainless steel shaft, mechanical seal and flow of 180 lpm, at 88M head conforming

Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for

operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal

foot mounted type with Class-'F' insulation, conforming to IS-325.

M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as

Rupees One Lakh Seven Thousand

2.00 Suitable cement concrete foundation duly plastered with anti vibration pads. 107752.55 Seven Hundred Fifty Two and Paisa Set

Fifty Five Only

SITC of electrical-driven terrace pump complete with electrical panel suitable for

automatic operation and consisting of following, complete in all respect as required:

Horizontal type centrifugal split-casing pump of cast-iron body and bronze impaller with

stainless steel shaft conforming to IS:1520

Suitable HP squirrel cage induction motor TEFC type suitable for operation on 415V 3-

phase 50Hz AC supply with IP 55 class of protection for enclosure, horizontal foot

mounted-type class F insulation conforming to IS:325

MS fabricated common base plate, coupling, coupling guard, foundation bolt etc. as

Suitable cement concrete foundation duly plastered with anti vibration pads.

Rupees Seventy Three Thousand Fifty

2.00 450LPM at 35 m. head 73053.39 Set

Three and Paisa Thirty Nine Only

Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel of

cubical construction, floor mounted type, fabricated out of 2mm. Thick CRCA sheet, dust

and vermin proof, powder coated of approved shade after 7 tank treatment process cable

alley, inter-connection, having switchgears and accessories mounting and internal wiring,

earth terminals, numbering etc. complete in all respect, suitable for operation on 415V,

phase, 50 HZ. AC Supply with enclosure protection class IP 42 as required.

Terrace Pump Control Panel (for 450LPM Pump)

183 100 Amps. TP MCCB.25 KA

Voltmeter (0-500 Volt) with selector switch

Ammeter (0- 100 Amps.) with Selector switch

Set of 3 Phase indication lamp

Suitable HP fully Automatic star delta starter with overload protection current sensing

type single phase preventor complete with all accessories and internal wiring required

for automatic operation.

Rupees Forty Thousand Five

1.00 selector switch for local / remote , auto/ manual/ off operation, On/Off indication lamp 40591.90 Hundred Ninety One and Paisa Ninety Set

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel of

cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley, inter-connection, having

switchgears and accessories mounting and internal wiring, earth terminals, numbering

etc. complete in all respect, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply

with enclosure protection class IP 42 as required.

COMMON PANEL IN FIRE PUMP HOUSE

a) 630 Amps. TP & MCCB 50 KA

b) Voltmeter (0-500 Volts) with selector switch

c) Ameter (0-300 Amps.) with selector switch & CT's etc

d) Set of 3 Phase indicating lamp.

e) Set of Al. bus bar 500 Amps.

OUTGOING : ( Electrical Fire / Sprinkler Pump )

2 Nos Electrical Driven fire Pump. 250 Amps. TP& MCCB-35K with suitable HP fully

automatic star/delta starter with over load protection, current sensing type single phase

preventor complete with all accessories and internal wiring required for automatic

operation, selector switch for local/remote, auto/manual/OFF operation.

2 Nos Jockey pump. 100 Amps. TP & N MCCB-25 KA with suitable HP fully automatic

star/delta starter with over load protection, current sensing type single phase preventor

complete with all accessories and internal wiring required for automatic operation,

selector switch for local/remote, auto/munual/OFF operation.

DIESEL ENGINE CONTROL

Control for Diesel Engine comprising:-

Auto/Manual selector switch & 3 attempt starting device, timers and relays as required,

push buttons, start/stop in manual mode.

Indication lamp for High/Low Lub. Oil pressure, High Water Temp. and Engine ON

Battery charger suitable for 12 V/24V DC with boost and tickle selector switch, 0-15 V/ 0-

30 V Dcvolt merer, 0-20A DC Ammeter.

All standard relays and accessories for automatic operation of diesel engine.

SYSTEM CONTROLLER

Designing, Supply, Installation, Testing and Commissioning of system controller to control

Rupees Three Lakh Eighty Thousand

operation of Main Electric Fire Pump, Diesel Pump, Pressurisation Pump, in sequence as

184 1.00 380792.37 Seven Hundred Ninety Two and Paisa Set

per specification consisting of relays, times, sensors, annunciation window for fault

Thirty Seven Only

indication, complete as per specification.

Suitable cement concrete foundation duly plastered with anti vibration pads.

Supplying and making end termination with brass Compression Gland & Al.lugs for

following sizes of PVC insulated, PVC sheathed/XLPE Al.conductor cables of 1.1 KV grade

Rupees One Thousand Twelve and

Paisa Seventy Two Only

Rupees Three Hundred Fifty and

Zero Paisa Only

Rupees Two Hundred Sixty Six and

Paisa Ninety Five Only

Rupees Five Hundred Five and Paisa

Ninety Three Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Supplying and installing following size of perforated painted with powder coating M.S.

cable trays with perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts,

painting suspenders etc. as required.

Rupees Five Hundred Eleven and

189 15.00 150 mm width x 50mm depth x 1.6 mm thickness. 511.87 Meter

Paisa Eighty Seven Only

Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor

armoured UG cable of 1.1 KV grade Conforming to IS 7098/1988 with upto date

ammendment of following size in the existing RCC/HUME/ METAL /GI /CI

/Stoneware/DWC pipe/ masonary Open Duct/ cable tray/ open in air etc. as requred.

Rupees Three Hundred Eighty Seven

190 120.00 4 core, 25 sq.mm. Aluminium Armoured 387.84 Meter

and Paisa Eighty Four Only

Rupees Five Hundred Eighty One and

191 100.00 3.5 core, 50 sq.mm. Aluminium Armoured 581.76 Meter

Paisa Seventy Six Only

Rupees One Thousand Sixteen and

192 50.00 3 core, 120 sq.mm. Aluminium Armoured 1016.06 Meter

Rupees Two Thousand Seven

193 75.00 3.5 core, 300 sq.mm. Aluminium Armoured 2750.23 Hundred Fifty and Paisa Twenty Meter

Earthing with GI Earth plate 600 mm x 600 mm x 6 mm th.including accessories and Rupees Six Thousand Three Hundred

194 2.00 providing masonry enclosure with cover plate having locking arrangement and watering 6332.21 Thirty Two and Paisa Twenty One Set

pipe with charcoal or coke and salt complete as required. Only

Providing & fixing 25 mm x 5 mm G.I. Strip in 40 mm dia GI pipe from earth electrode

Rupees Five Hundred Ninety Eight

195 75.00 including connections with GI nut, bolt, spring, washer excavation and re-filling etc. as 598.30 metre

and Paisa Thirty Only

Providing & fixing 25 mm x 5 mm G.I. Strip in on surface or in recess for connections etc Rupees Two Hundred Six and Paisa

as required. Seventy Eight Only

Providing and fixing 6 SWG dia G.I wire on surface or in recess for loop earthing as Rupees Fifty Nine and Paisa Thirty

required. Two Only

Supplying and installing following size of perforated painted with powder coating M.S.

cable trays with perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts,

painting suspenders etc. as required.

Rupees Six Hundred Fifty Eight and

Paisa Forty Eight Only

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to

IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in

ground including excavation & providing cement concrete blocks as supports,

anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc.

of following sizes complete as required

Rupees Three Thousand Two

199 561.00 150 mm dia 3223.73 Hundred Twenty Three and Paisa metre

Seventy Three Only

Rupees Two Thousand One Hundred

Fifty Five and Paisa Thirty Four Only

Rupees One Thousand Nine Hundred

201 61.75 80 mm dia 1961.42 metre

Sixty One and Paisa Forty Two Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to

IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets

etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or

more coats of synthetic enamel paint of required shade complete as required.

Rupees Four Thousand Six Hundred

Twenty Nine and Paisa Sixty Six Only

Rupees Three Thousand Twenty Eight

and Paisa Eighty Two Only

Rupees Two Thousand One Hundred

Sixty Five and Paisa Twenty Six Only

Rupees One Thousand Five Hundred

Ninety Seven and Paisa Forty Six Only

Rupees One Thousand Three

206 343.20 65 mm dia 1367.79 Hundred Sixty Seven and Paisa metre

Seventy Nine Only

Rupees One Thousand Eighty Five

and Paisa Fifty Nine Only

Rupees Eight Hundred Seventy Six

208 418.00 40mm dia 876.28 metre

and Paisa Twenty Eight Only

Rupees Seven Hundred Twenty One

209 764.50 32 mm dia 721.19 metre

and Paisa Nineteen Only

Rupees Six Hundred Thirty and Paisa

Supplying and fixing single headed internal hydrant valve with instantanous Gun metal Rupees Six Thousand Four Hundred

211 24.00 couplings of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) 6479.67 Seventy Nine and Paisa Sixty Seven each

with blank Gunmetal cap and chain as required Only

Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia

Rupees Six Thousand Four Hundred

212 4.00 instantaneous FM Gun metal coupling and cast iron wheel, ISI marked, conforming to IS 6479.66 each

Seventy Nine and Paisa Sixty Six Only

5290 (type A) with blank Gunmetal cap and chain as required.

Supplying, fixing, testing and commissioning of following size butterfly valve (manual)

with CI body SS disc nitrile sheet & O-ring & PN 1.6 pressure rating as specified.

Rupees Three Thousand Two

213 12.00 50 mm dia 3206.78 Hundred Six and Paisa Seventy Eight each

Rupees Four Thousand Two Hundred

Twenty Two and Paisa Three Only

Rupees Five Thousand Six Hundred

Fifty and Zero Paisa Only

Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN

with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts bolts

washers, gaskets and conforming to IS 780 of following size asrequired:

Rupees Nineteen Thousand Two

216 7.00 150 mm dia 19289.83 Hundred Eighty Nine and Paisa Eighty each

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees Thirty Three Thousand Three

217 7.00 200 mm dia 33332.20 Hundred Thirty Two and Paisa each

Rupees One Thousand One Hundred

218 28.00 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice1119.49

of required size to be fitted between flange & landing valve of external and internal

hydrants to reduce pressure at the outlet to

Nineteen and Paisa Forty Nine Only

Supplying, fixing, testing and commissioning, of following sizes of non return valve with C

Rupees Four Thousand Nine Hundred

Six and Paisa Seventy Eight Only

Rupees Six Thousand Five Hundred

220 2.00 80 mm dia 6517.79 Seventeen and Paisa Seventy Nine each

Rupees Nine Thousand Three

221 22.00 100 mm dia 9364.41 Hundred Sixty Four and Paisa Forty each

Rupees Fifteen Thousand Seventy

Two and Paisa Eighty Eight Only

Supplying, fixing, testing and commissioning of following size Y-Strainer of ductile CI body

flanged ends with stainless steel strainer as specified.

Rupees Five Thousand Six Hundred

Forty Seven and Paisa Forty Six Only

Rupees Eighteen Thousand Eight

224 2.00 200 mm dia 18868.65 Hundred Sixty Eight and Paisa Sixty each

Supplying and fixing 63mm dia, 15mtr. Long RRL hose pipe with 63mm dia Male and

Rupees Four Thousand Four Hundred

225 56.00 Female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 636 4408.48 each

Eight and Paisa Forty Eight Only

(type-A) as required.

Supplying and fixing First-Aid-Hose Reel with MS construction spray painted in Post

office Red, conforming to IS 884 with upto date amendments, complete with the following

30 m long 20mm (nominal internal) dia water hose Thermoplastic (Textile reinforced)

Type-2 as per IS:

20 mm (nominal internal) dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipments on wall.

Rupees Ten Thousand Two Hundred

226 23.00 Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe 10231.36 each

Thirty One and Paisa Thirty Six Only

Supplying and fixing fire hose cabinet fabricated from 16 gauge M.S. Sheet with single or

double glazed front door (with 4 mm thick glass) and locking arrangement, painted fire

red with stove enamelled paint "FIRE HOSE" written on front including necessary

supports approximate size.

Rupees Ten Thousand Six Hundred

227 5.00 a)750mm x 600mm x 250mm deep. (External) 10625.20 each

Twenty Five and Paisa Twenty Only

Rupees Twenty One Thousand Ninety

228 24.00 Providing and fixing Fire hose cabinet door (40mm x 40mm x 5mm) angle depth fabricated with

2100mm x 1200mm MS sheet. Complete in all respecteach

with 25mmx25mmx3mm angle frame all around and stiffened in betw

Four and Paisa Eighty Six Only

Supply and fixing 63mm dia Gun Metal branch pipe with 20mm (nominal internal

Rupees Two Thousand Forty Seven

229 28.00 diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous 2047.46 each

and Paisa Forty Six Only

connection to interconnect hose pipe coupling as required.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Supplying and fixing following fire brigade connection of cast iron body with Gun metal

male instantaneous inlet couplings complete with cap and chain as required for 150mm

dia MS pipe connection, conforming to IS 904 as required.

Rupees Five Thousand Seven

230 4.00 2 Way FBC of Cl body 5713.56 Hundred Thirteen and Paisa Fifty Six each

Rupees Eleven Thousand Eight

231 1.00 4 Way FBC of Cl body 11842.37 Hundred Forty Two and Paisa Thirty each

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in

Rupees Fifteen Thousand Four

height with Air release valve on top and flanged connection to riser, drain arrangement

232 5.00 15461.02 Hundred Sixty One and Paisa Two each

with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and

painting with synthetic enamel pain of approved shade as required.

Providing fixing testing & commissioning of 15 mm size quartzoid bulb type sprinklers, of

rating 68 degree C. pendent / upright with required accessories.

Rupees Four Hundred Forty Two and

233 468.00 Sprinkler (Pendent / Upright) 442.37 each

Paisa Thirty Seven Only

Rupees Five Hundred Twenty Two

234 120.00 Side Wall Speinkler 522.88 each

and Paisa Eighty Eight Only

Rupees One Thousand Three

235 5.00 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 1310.17 Hundred Ten and Paisa Seventeen each

Providing & fixing Auto Air release valve for fire hydent and sprinkler, suitable for pressure not less than 15 Kg/Sq.cm.

Rupees Three Thousand Five

236 7.00 25 mm dia 3532.98 Hundred Thirty Two and Paisa Ninety each

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as

Rupees Six Thousand Three Hundred

Sixty Seven and Paisa Eighty Only

Providing and fixing in position the industrial type pressure gauges with gun metal / Rupees One Thousand Thirteen and

brass valves complete as required Paisa Fifty Six Only

Providing and fixing stainless steel standard Fireman's Axe with heavy insulated rubber Rupees Seven Hundred Eighteen and

handle tested to 20000 volts as per IS : 926 complete. Paisa Eleven Only

Supply, installation, testing and commissioning of 150 mm dia Installation Control Valve

inclusive of 2 nos 150 mm dia Butterfly Valve, strainer, Alarm Valve with Water Motor Rupees Forty Thousand Eight

240 1.00 Gong, Pressure Gauges, Test Lines with Ball Valves with necessary MS Class "C" piping 40849.16 Hundred Forty Nine and Paisa Sixteen each

with threaded fittings of required sizes. It should be complete as per manufacturer's Only

specifications & as directed by Engineer- in-charge.

Providing, installing, testing & commisioning of fire brigade draw out connection (fire

department connection) with suction pipe MS class 'C' 100 mm dia. & 100 mm dia. foot

valve & steel chain including wall mounted box M.S. construction made out of 16 gauge Rupees Seven Thousand Seven

241 1.00 MS Sheet with glass door to house the above mentioned componenets. It should be 7775.99 Hundred Seventy Five and Paisa each

complete as per manufacturer's specifications & as directed by Engineer- in-charge. (to be Ninety Nine Only

connected to static water tank) It should be complete as per manufacturer's specifications

& as directed by Engineer- in-charge.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and fixing mechanical foam type(ISI marked) fire extinguishers consisting of

welded M.S. cylindrical body squeeze lever discharge valve 30 cm long high pressure

discharge hose, discharge nozzle suspension bracket ISI marked as per IS 933 finished

externally with red enamel paint and fixed to wall with brackets complete with internal

Rupees Two Thousand Nine Hundred

242 20.00 Capacity 6 kg. I.S.I. Marked. 2976.47 Seventy Six and Paisa Forty Seven each

Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S

cylinderical body,squeeze lever discharge valve fitted with internal dischargetube, 30cms

long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS

: 934 finished externally with red enamel paint and fixed to wall with brackets with rawl

plug/dash fasteners complete with internal charge.

Rupees Eight Thousand Six Hundred

243 20.00 Capacity 4.5 kg. I.S.I. Marked. 8622.37 Twenty Two and Paisa Thirty Seven each

Supplying, installing, testing and commissioning of flooded Vertical Inline cetrifugal pump

set with stainless steel body , stainless steel impller and SS shaft capable to deliver of

following capacity and head. given by TFC squirrels induction motor suitable for

operation on 415 volt , 50 HZ AC power supply running speed 2900 RPM .The installation

shall be complete with all necessary ancillaries & accessories including base plate

coupling guard etc complete as required.

Flow rate : 150 LPM

Rupees Eighty One Thousand Three

4.00 Required for : UG T ( Domestic Water & Flusing Water ) 81363.56 Hundred Sixty Three and Paisa Fifty set

Supply, installation, testing and commissioning of continuous duty submersible

245 centrifugal non-clogging drainage pumps complete with 3 phase motor with all necessary

protection and mechanical seal etc. complete with all ancillaries etc required.

Flow rate : 100 LPM

Solid Handling : 10 – 12 MM

Purpose : Drainage

Rupees Sixty Three Thousand Five

2.00 MOC : CI 63559.32 Hundred Fifty Nine and Paisa Thirty set

Control Panel for plumbing Pump system with provision for Automatic Pump Operation

based on tank levels as well as remote monitoring

200 Amps. TP MCCB.25 KA

Voltmeter (0-500 Volt) with selector switch

Ammeter (0- 100 Amps.) with Selector switch

Set of 3 Phase indication lamp

8 nos. outgoing feeders having up to 7.5 HP DOL starter with micro computer based

multifunction motor protection & current sensing type single phase preventor, High/Low

Voltage protection & Phase Reverse Protection & indicator along with suitable

Change/Over Switch for reverse phasing condition Level Based pump automation for

filling OH tank from ground level sump as well as Borewell Pump automation for filling

Sump complete with all accessories and internal wiring required for automatic operation.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees Three Lakh Twenty Three

selector switch for local / remote , auto/ manual/ off operation & On/Off/Trip Indicator

1.00 323200.00 Thousand Two Hundred and Zero Set

MEDICAL GAS PIPELINE SYSTEM

Rupees Six Thousand Eight Hundred

247 10.00 Supply,Instllation testing and commissiong of Copper Piping as per technical specification 6850.87 Mtrs.

Fifty and Paisa Eighty Seven Only

BS EN: 13348 KITE MARK - 108mmODX1.5mm thick

Rupees Five Thousand Five Hundred

Supply,Instllation testing and commissiong of Copper Piping as per technical specification

248 10.00 5572.78 Seventy Two and Paisa Seventy Eight Mtrs.

BS EN: 13348 KITE MARK -76mmODX1.5mm thick

Supply,Instllation testing and commissiong of Copper Piping as per technical specification Rupees Four Thousand Six Hundred

BS EN: 13348 KITE MARK-54mmODX1.2mm thick Forty Three and Paisa Nine Only

Rupees Three Thousand Four

Supply,Instllation testing and commissiong of Copper Piping as per technical specification

250 44.00 3480.54 Hundred Eighty and Paisa Fifty Four Mtrs.

BS EN: 13348 KITE MARK-42mm ODX1.2mm thick

Rupees Two Thousand Six Hundred

Supply,Instllation testing and commissiong of Copper Piping as per technical specification

251 560.00 2667.29 Sixty Seven and Paisa Twenty Nine Mtrs.

BS EN: 13348 KITE MARK -28mmODX 1.0mm thick

Supply,Instllation testing and commissiong of Copper Piping as per technical specification Rupees One Thousand Eight Hundred

BS EN: 13348 KITE MARK-22mmODX 1.0mm thick Fifty Four and Paisa Four Only

Supply,Instllation testing and commissiong of Copper Piping as per technical specification Rupees One Thousand Ninety Eight

BS EN: 13348 KITE MARK- 15mm ODX0.9mm thick and Paisa Fifty Six Only

Supply,Instllation testing and commissiong of Copper Piping as per technical specification Rupees Six Hundred Thirty Nine and

BS EN: 13348 KITE MARK -12mm ODX0.7mm thick Paisa Five Only

Supply,Installation, testing and commissioning of metal Gas outlet points for Oxygen,

Rupees Six Thousand Three Hundred

255 90.00 Nitrous Oxide, Air, & Vacuum system as per technical specification NFPA-99 /HTM 02-01 6391.36 No.

Ninety One and Paisa Thirty Six Only

imported , European CE marked with 4 digit notafied body no. / UL Listed - for Oxygen

Supply,Installation, testing and commissioning of metal Gas outlet points for Oxygen,

Nitrous Oxide, Air, & Vacuum system as per technical specification NFPA-99 /HTM 02-01 Rupees Six Thousand Three Hundred

imported , European CE marked with 4 digit notafied body no. / UL Listed -for Nitrous Ninety One and Paisa Thirty Six Only

Supply,Installation, testing and commissioning of metal Gas outlet points for Oxygen,

Nitrous Oxide, Air, & Vacuum system as per technical specification NFPA-99 /HTM 02-01 Rupees Six Thousand Three Hundred

imported , European CE marked with 4 digit notafied body no. / UL Listed - for Ninety One and Paisa Thirty Six Only

Compressed Air ( 4 Bar )

Rupees Six Thousand Three Hundred

258 5.00 For Compressed Air (7 Bar) 6391.36 No.

Ninety One and Paisa Thirty Six Only

Supply,Installation, testing and commissioning of metal Gas outlet points for Oxygen,

Rupees Six Thousand Three Hundred

259 90.00 Nitrous Oxide, Air, & Vacuum system as per technical specification NFPA-99 /HTM 02-01 6391.36 No.

Ninety One and Paisa Thirty Six Only

imported , European CE marked with 4 digit notafied body no. / UL Listed - For Vacuum

Supply,Installation, testing and commissioning of metal Gas outlet points for Oxygen,

Rupees Six Thousand Three Hundred

260 2.00 Nitrous Oxide, Air, & Vacuum system as per technical specification NFPA-99 /HTM 02-01 6391.36 No.

Ninety One and Paisa Thirty Six Only

imported , European CE marked with 4 digit notafied body no. / UL Listed - For AGSS

Supply,Installation, testing and commissioning of metal Gas outlet points for Oxygen,

Rupees Six Thousand Three Hundred

261 2.00 Nitrous Oxide, Air, & Vacuum system as per technical specification NFPA-99 /HTM 02-01 6391.36 No.

Ninety One and Paisa Thirty Six Only

imported , European CE marked with 4 digit notafied body no. / UL Listed - For CO2

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Matching Probe/adopter With one end suitable for Hose & other end suitable for terminal Rupees Two Thousand Three

262 90.00 units as per technical specifications NFPA-99 /HTM 02-01 imported , European CE 2399.76 Hundred Ninety Nine and Paisa No.

marked with 4 digit notafied body no. / UL Listed - for Oxygen Seventy Six Only

Matching Probe/adopter With one end suitable for Hose & other end suitable for terminal Rupees Two Thousand Three

263 2.00 units as per technical specifications NFPA-99 /HTM 02-01 imported , European CE 2399.76 Hundred Ninety Nine and Paisa No.

marked with 4 digit notafied body no. / UL Listed -for Nitrous Oxide Seventy Six Only

Matching Probe/adopter With one end suitable for Hose & other end suitable for terminal Rupees Two Thousand Three

264 10.00 units as per technical specifications NFPA-99 /HTM 02-01 imported , European CE 2399.76 Hundred Ninety Nine and Paisa No.

marked with 4 digit notafied body no. / UL Listed - for Compressed Air ( 4 Bar )_ Seventy Six Only

Matching Probe/adopter With one end suitable for Hose & other end suitable for terminal Rupees Two Thousand Three

265 2.00 units as per technical specifications NFPA-99 /HTM 02-01 imported , European CE 2399.76 Hundred Ninety Nine and Paisa No.

marked with 4 digit notafied body no. / UL Listed -for Compressed Air (7 Bar) Seventy Six Only

Matching Probe/adopter With one end suitable for Hose & other end suitable for terminal Rupees Two Thousand Three

266 90.00 units as per technical specifications NFPA-99 /HTM 02-01 imported , European CE 2399.76 Hundred Ninety Nine and Paisa No.

marked with 4 digit notafied body no. / UL Listed - For Vacuum Seventy Six Only

Matching Probe/adopter With one end suitable for Hose & other end suitable for terminal Rupees Two Thousand Three

267 1.00 units as per technical specifications NFPA-99 /HTM 02-01 imported , European CE 2399.76 Hundred Ninety Nine and Paisa No.

marked with 4 digit notafied body no. / UL Listed - For AGSS Seventy Six Only

Matching Probe/adopter With one end suitable for Hose & other end suitable for terminal Rupees Two Thousand Three

268 1.00 units as per technical specifications NFPA-99 /HTM 02-01 imported , European CE 2399.76 Hundred Ninety Nine and Paisa No.

marked with 4 digit notafied body no. / UL Listed - For CO2 Seventy Six Only

Supply, Installation, testing and commissioning of Zone Service Units Valves as per Rupees One Lakh Ten Thousand Four

269 1.00 Technical Specification NFPA-99 /HTM 02-01 imported , European CE marked with 4 110402.29 Hundred Two and Paisa Twenty Nine No.

digit notafied body no. / UL Listed - 2 Gas Services Only

Supply, Installation, testing and commissioning of Zone Service Units Valves as per Rupees One Lakh Thirty Three

270 1.00 Technical Specification NFPA-99 /HTM 02-01 imported , European CE marked with 4 133644.41 Thousand Six Hundred Forty Four No.

digit notafied body no. / UL Listed - 3 Gas Services and Paisa Forty One Only

Supply, Installation, testing and commissioning of Zone Service Units Valves as per Rupees One Lakh Fifty Six Thousand

271 1.00 Technical Specification NFPA-99 /HTM 02-01 imported , European CE marked with 4 156887.42 Eight Hundred Eighty Seven and Paisa No.

digit notafied body no. / UL Listed -4 Gas Service Forty Two Only

Supply, Installation, testing and commissioning of Zone Service Units Valves as per Rupees One Lakh Eighty Thousand

272 1.00 Technical Specification NFPA-99 /HTM 02-01 imported , European CE marked with 4 180129.54 One Hundred Twenty Nine and Paisa No.

digit notafied body no. / UL Listed -5 Gas Services Fifty Four Only

Supply, Installation, testing and commissioning of Touch type LCD Medical Gas Alarm Rupees Two Lakh Ninety Thousand

273 1.00 Panel as per tender specifications. NFPA-99 / /HTM 02-01 imported , European CE 290531.83 Five Hundred Thirty One and Paisa No.

marked with 4 digit notafied body no. / UL Listed - Master Alarm Panel Eighty Three Only

Supply, Installation, testing and commissioning of Touch type LCD Medical Gas Alarm Rupees One Lakh Ninety One

274 1.00 Panel as per tender specifications. NFPA-99 / /HTM 02-01 imported , European CE 191750.60 Thousand Seven Hundred Fifty and No.

marked with 4 digit notafied body no. / UL Listed - 2 Gas Service Paisa Sixty Only

Supply, Installation, testing and commissioning of Touch type LCD Medical Gas Alarm Rupees Two Lakh Twenty Six

275 1.00 Panel as per tender specifications. NFPA-99 / /HTM 02-01 imported , European CE 226614.67 Thousand Six Hundred Fourteen and No.

marked with 4 digit notafied body no. / UL Listed -3 Gas Service Paisa Sixty Seven Only

Supply, Installation, testing and commissioning of Touch type LCD Medical Gas Alarm Rupees Two Lakh Sixty One Thousand

276 1.00 Panel as per tender specifications. NFPA-99 / /HTM 02-01 imported , European CE 261478.74 Four Hundred Seventy Eight and No.

marked with 4 digit notafied body no. / UL Listed -4 Gas Service Paisa Seventy Four Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Supply, Installation, testing and commissioning of Touch type LCD Medical Gas Alarm Rupees Two Lakh Ninety Six

277 1.00 Panel as per tender specifications. NFPA-99 / /HTM 02-01 imported , European CE 296342.81 Thousand Three Hundred Forty Two No.

marked with 4 digit notafied body no. / UL Listed - 5 Gas Service and Paisa Eighty One Only

supply, Installation testing and commissioning of Fully Automatic Oxygen Control System

Rupees Five Lakh Fifty Two Thousand

278 1.00 ( Improted for Oxygen as technical specifications. NFPA-99 /HTM 02-01 imported , 552010.57 Set

Ten and Paisa Fifty Seven Only

European CE marked with 4 digit notafied body no. / UL Listed

Supply, Installation, Testing and Commissioning of fully Oxygen Manifold ( 20+20 ) as per Rupees Two Lakh Forty Six Thousand

279 1.00 technical specifications. The cylinders shall not be included in the quoted price. CE 246952.19 Nine Hundred Fifty Two and Paisa Set

marked Nineteen Only

Supply, Installation, testing and commissioning of 20 cylinder Emergency Oxygen Supply Rupees One Lakh Twenty Three

280 1.00 System as per technical specifications. The cylinders shall not be included in the quoted 123475.65 Thousand Four Hundred Seventy Five Set

price. CE marked and Paisa Sixty Five Only

Supply installation, testing and commissioning of oxygen flow meter (Imported )with Rupees Six Thousand Nine Hundred

281 90.00 humidifier bottle 0-15Litres, European CE Marked with 4 digit notafied body no. as per 6972.64 Seventy Two and Paisa Sixty Four No.

technical specifications imported for other area Only

supply installation testing and commission of fully automatic Gas Control Panel for

Rupees Five Lakh Fifty Two Thousand

282 1.00 Nitrous Oxide (Imported) as per technical NFPA-99 /HTM 02-01 importedspecifications. 552010.57 No.

Ten and Paisa Fifty Seven Only

European CE marked with 4 digit notafied body no. / UL Listed

supply installation testing and commissioning of nitrous Oxide Manifold ( 6+6) as per Rupees Seventy Four Thousand

283 1.00 technical specifications. The cylinder shall not be included on the quoted price.CE 74085.92 Eighty Five and Paisa Ninety Two Set

supply installation, testing and commissioning of 2+2 cylinder Emergency Nitrous Oxide Rupees Twenty Four Thousand Six

284 1.00 supply System as per technical specifications. The cylinder shall not be included in the 24695.31 Hundred Ninety Five and Paisa Thirty Set

quoted price. CE marked One Only

Suply installation testing and commissiong of Ward suction unit (Imported )with above Rupees Twenty One Thousand Four

285 90.00 1/2 gallaon sucton collection jar as per specifications and European CE marked with 4 21499.18 Hundred Ninety Nine and Paisa No.

digit notafied no for other area Eighteen Only

Supply installation, testing and commissioning ofTheatre Suctin Unit (imported) with

Nos. 1 gallons Jars , with monochromatic LCD display , set up a preferred vacuum value;

Rupees Eighty Seven Thousand One

zeroing the device at any time.The device should have a quick I/0 switch button that

286 1.00 87159.28 Hundred Fifty Nine and Paisa Twenty No.

allows the operator to quickly lock and reactivate the vacuum, keeping unchanged the

previous preset valueEuropean CE marked with 4 digit notafied no as per technical

Supply installation testing and commissioning of High pressure Hose antistatic duly

Rupees Five Hundred Twenty Two

287 80.00 colour coded for oxygen , Nitrous Oxide Compressed air and vacuum as per technical 522.61 RM

and Paisa Sixty One Only

specification . (100 mtrs. Of each colour)

Rupees Forty Thousand Six Hundred

288 10.00 supply installation testing and commissioning of Horizontal Bed Head Panel -CE marked . 40674.15 No.

Seventy Four and Paisa Fifteen Only

Supply, Installation, testing and commissioning of Isolation valves as per Technical Rupees Two Thousand Five Hundred

Specification -15mm Fifty Seven and Paisa Eight Only

Rupees Three Thousand Seven

Supply, Installation, testing and commissioning of Isolation valves as per Technical

290 2.00 3718.74 Hundred Eighteen and Paisa Seventy No.

Specification -22mm

Rupees Four Thousand Eight

Supply, Installation, testing and commissioning of Isolation valves as per Technical

291 2.00 4881.29 Hundred Eighty One and Paisa No.

Specification - 28mm

Twenty Nine Only

Supply, Installation, testing and commissioning of Isolation valves as per Technical Rupees Six Thousand Forty Two and

Specification - 42mm Paisa Ninety Five Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees Seven Thousand Three

Supply, Installation, testing and commissioning of Isolation valves as per Technical

293 1.00 7321.05 Hundred Twenty One and Paisa Five No.

Specification -54mm

Supply, Installation, testing and commissioning of Isolation valves as per Technical Rupees Ten Thousand Two Hundred

Specification -76mm Twenty Six and Paisa Fifty Three Only

Rupees Fourteen Thousand Five

Supply, Installation, testing and commissioning of Isolation valves as per Technical

295 1.00 14526.55 Hundred Twenty Six and Paisa Fifty No.

Specification -108mm

Nurse Call System Rupees Nine Thousand One Hundred

296 100.00 Supply and Installation of Bed Side Unit – Complete with Nurse Call, additional help 9122.64 Twenty Two and Paisa Sixty Four Nos.

alarm & wired remote hand held unit. Only

Supply and Installation of Central Station – to monitor the nurse call/ UMAI/ additional Rupees Eighty Thousand Seven

297 5.00 help alarm for maximum Nos. of beds. Displays 20 bed number along with the audible 80767.92 Hundred Sixty Seven and Paisa Ninety Nos.

Rupees Eleven Thousand Four

298 100.00 Hand Held Remote 11446.86 Hundred Forty Six and Paisa Eighty Nos.

Modular Pre- Fabricated Operation Theatres Rupees Twenty Four Thousand One

299 140.00 Supply & Installation of solid Mineral Surface Walls Construction – duly European CE 24156.86 Hundred Fifty Six and Paisa Eighty Six sqm

Marked / US FDA as per technical specification Only

Rupees Fourteen Thousand Two

Supply & Installation of Ceiling Construction – duly European CE Marked / US FDA as per

300 105.00 14207.48 Hundred Seven and Paisa Forty Eight sqm

technical specification (imported)

Rupees Nine Thousand Three

301 12.00 Double peripheral lights-Indigenous – (cladding type OT) as per technical specification 9355.75 Hundred Fifty Five and Paisa Seventy Nos

Rupees Two Lakh Forty One

302 2.00 Surgeon Control PanelCE Marked as per technical specification 241288.86 Thousand Two Hundred Eighty Eight Nos

and Paisa Eighty Six Only

Rupees Twenty Nine Thousand Five

303 2.00 X-ray Viewing Screen – (cladding type OT) as per technical specification 29545.82 Hundred Forty Five and Paisa Eighty Nos

Rupees One Thousand Seven

304 100.00 Static dissipative Flooring (Tile Form) – (cladding type OT) as per technical specification 1790.98 Hundred Ninety and Paisa Ninety sqm

Rupees One Lakh Sixty Two Thousand

305 2.00 Scrub Station – (cladding type OT) as per technical specification 162500.51 Five Hundred and Paisa Fifty One Nos

Rupees Four Lakh Eighty Seven

306 2.00 Automatic Sliding Door– as per technical specification size 1500 x 2100 487502.29 Thousand Five Hundred Two and Nos

Paisa Twenty Nine Only

Writing Board with magneting system Size:- 1000x700x60 Deep made out G.P Sheet to Rupees Seventeen Thousand Seven

307 2.00 be flushed with the wall system complete set as per enclosed tender technical 17727.05 Hundred Twenty Seven and Paisa Nos

specificationsl. Five Only

Rupees Thirty One Thousand Five

Cascade Pressure stabiliser having muliti 304 grade stainless steel blade to control the

308 2.00 31515.49 Hundred Fifteen and Paisa Forty Nine Nos

room air pressure .

Rupees Forty Four Thousand Three

Srorage unit size 1666 x 865 x 350 having two shelves & made of zinc passivated steel

309 2.00 44318.73 Hundred Eighteen and Paisa Seventy Nos

having 5mm thick glass door & mounted flush with the theatre wall.

Rupees Ninety Three Thousand Five

Window 1000 mm x 1000 mm complete set as per enclosed tender technical

310 2.00 93561.27 Hundred Sixty One and Paisa Twenty Nos

specificationsl.

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees Seventy Three Thousand

311 2.00 Electrical Wiring inside OT (include all wiring of required core for one nos OT) 73863.79 Eight Hundred Sixty Three and Paisa Nos

Seventy Nine Only

Rupees Seventeen Lakh Nine

312 2.00 LED OT Light duly European CE Marked / US FDA (imported) as per specifications 1709821.47 Thousand Eight Hundred Twenty One Nos

and Paisa Forty Seven Only

Rupees Thirteen Lakh Seventy Three

Single arm Ceilling Pendent for the O.T. European CE marked with 4 digit notafied no. (

313 2.00 1373870.88 Thousand Eight Hundred Seventy Nos

Imported) as per technical specfication

and Paisa Eighty Eight Only

Rupees Fourteen Lakh Seventy Two

Double arm Ceilling Pendent for the O.T. European CE marked with 4 digit notafied no. (

314 2.00 1472355.95 Thousand Three Hundred Fifty Five Nos

Imported) as per technical specfication

and Paisa Ninety Five Only

Rupees Three Lakh Eighty Five

315 2.00 Providing and laying OT tables 385648.82 Thousand Six Hundred Forty Eight Nos

and Paisa Eighty Two Only

Rupees One Lakh Ninety Two

Pass Box, double door, stainless steel, inner size: 600 mm length x 600 mm width x

316 2.00 192046.33 Thousand Forty Six and Paisa Thirty Nos

mm height and as per technical specification

CSSD & TSSU & Kitchen Equipment

Horizontal Rectangular High Pressure High Vacuum, Radial hinge type double door Steam Rupees Fifty Three Lakh Sixty Seven

317 1.00 Sterilizer, 425-450 litres capacity, minimum inner chamber size 600 mm width x 600 mm 5367451.90 Thousand Four Hundred Fifty One Nos

height x 1200 mm length, fully automatic cycle operation and printer with 1 No. Stainless and Paisa Ninety Only

steel Carriage and 2 Nos. Stainless steel Transfer trolley and as per technical specification

Rupees Four Lakh Eighty Seven

Work table with double sink, stainless steel, overall Size: 2400 mm length x 650 mm

318 2.00 487502.29 Thousand Five Hundred Two and Nos

width x 900 mm height and as per technical specification

Paisa Twenty Nine Only

Rupees One Lakh Fifty Seven

319 2.00 Spray gun rinser with eight attachments and as per technical specification 157576.71 Thousand Five Hundred Seventy Six Nos

and Paisa Seventy One Only

Rupees Five Lakh Eighty Five

Control & Packing table, Stainless steel, overall size: 2000 mm length x 1400 mm width x

320 2.00 585988.10 Thousand Nine Hundred Eighty Eight Nos

1400 mm Height and as per technical specification

and Paisa Ten Only

Rupees Four Lakh Eighty Seven

Stainless steel Table mounted Gauze cutting machine, table size: 900 mm length x

321 1.00 487502.29 Thousand Five Hundred Two and Nos

mm width x 900 mm height and as per technical specification

Paisa Twenty Nine Only

Rupees Five Lakh Fifty One Thousand

Stainless steel Table mounted Continuous Band Sealer, table size: 1200 mm length x

322 1.00 551517.72 Five Hundred Seventeen and Paisa Nos

mm width x 900 mm height and as per technical specification

Seventy Two Only

Rupees One Lakh Sixty Seven

Work table with under shelf, stainless steel, size: 1200 mm length x 600 mm width x

323 2.00 167425.06 Thousand Four Hundred Twenty Five Nos

mm height and as per technical specification

and Paisa Six Only

Rupees Three Lakh Thirty Nine

Linen Inspection table, size: 1400 mm length x 1200 mm width x 900 mm height and as

324 1.00 339774.69 Thousand Seven Hundred Seventy Nos

per technical specification

Four and Paisa Sixty Nine Only

Rupees Two Lakh Sixteen Thousand

Closed Distribution trolley, stainless steel, size: 1280 mm length x 650 mm width x

325 2.00 216667.59 Six Hundred Sixty Seven and Paisa Nos

mm height and as per technical specification

Fifty Nine Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees One Lakh Ninety Two

Table trolley with two shelves, stainless steel, size: 1080mm length x 550mm width x

326 2.00 192046.33 Thousand Forty Six and Paisa Thirty Nos

800mm height and as per technical specification

Rupees One Lakh Ninety Two

Storage Rack with five shelves, stainless steel, size: 1830 mm length x 535 mm width x

327 2.00 192046.33 Thousand Forty Six and Paisa Thirty Nos

1830 mm height and as per technical specification

Rupees Eleven Lakh Seventy Six

Work table with double sink, stainless steel, overall Size: 1500 mm length x 650 mm

328 1.00 1176900.01 Thousand Nine Hundred and Paisa Nos

width x 900 mm height and as per technical specification

Rupees Seventy Eight Thousand

329 1.00 Spray gun rinser with eight attachments and as per technical specification 78788.35 Seven Hundred Eighty Eight and Paisa Nos

Thirty Five Only

Rupees Five Lakh Fifty One Thousand

Control & Packing table, Stainless steel, overall size: 1200 mm length x 700 mm width x

330 1.00 551517.72 Five Hundred Seventeen and Paisa Nos

1400 mm Height and as per technical specification

Seventy Two Only

Rupees One Lakh Sixty Seven

Work table with under shelf, stainless steel, size: 1200 mm length x 600 mm width x

331 2.00 167425.06 Thousand Four Hundred Twenty Five Nos

mm height and as per technical specification

and Paisa Six Only

Rupees One Lakh Forty Two

Storage Rack with Three shelves, stainless steel, size: 900 mm length x 425 mm width x

332 2.00 142803.80 Thousand Eight Hundred Three and Nos

900 mm height and as per technical specification

Paisa Eighty Only

Rupees Forty Eight Thousand Two

333 1.00 48258.07 Hundred Fifty Eight and Paisa Seven Nos

WORK TABLE WITH OTTOM SHELF & 01 DRAWER

Rupees Twenty Four Thousand Six

334 1.00 WEIGHING SCALE, CAPACITY 20 KG. 24621.26 Hundred Twenty One and Paisa Nos

Twenty Six Only

Rupees Forty Four Thousand Eight

335 2.00 PLATEFORM TROLLEY 44810.59 Hundred Ten and Paisa Fifty Nine Nos

Rupees Forty One Thousand Three

336 1.00 S.S. RACK WITH 04 SHELF 41363.85 Hundred Sixty Three and Paisa Eighty Nos

Rupees Seventeen Thousand Two

337 1.00 17235.19 Hundred Thirty Five and Paisa Nos

Rupees Fifty Three Thousand Four

338 4.00 S.S. COLD ROOM PERFORATED RACK WITH 05 SHELF 53428.18 Hundred Twenty Eight and Paisa Nos

Rupees Forty Six Thousand Five

339 2.00 S.S. COLD ROOM PERFORATED RACK WITH 04 SHELF 46533.95 Hundred Thirty Three and Paisa Nos

Ninety Five Only

DRY STORE Rupees Ten Thousand Three Hundred

DRY STORE RACK 5 SHELF MS.. Forty and Paisa Ninety Seven Only

Rupees Ten Thousand Three Hundred

341 1.00 GUNNEY BAG STAND 10340.97 Nos

Forty and Paisa Ninety Seven Only

Rupees Forty Eight Thousand Two

342 1.00 MOBILE FLOUR/SUGAR BIN 48258.07 Hundred Fifty Eight and Paisa Seven Nos

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees Fifty Three Thousand Four

343 1.00 STORE RACK with 04 SHELF 53428.18 Hundred Twenty Eight and Paisa Nos

Rupees Forty Four Thousand Eight

344 1.00 44810.59 Hundred Ten and Paisa Fifty Nine Nos

STORE RACK with 04 SHELF

Rupees One Lakh Sixty Eight

345 1.00 168902.13 Thousand Nine Hundred Two and Nos

ATTA/SUGER/MAIDA TROLLEY,

Paisa Thirteen Only

Rupees Two Lakh Twenty Four

346 1.00 ATTA/DOUGH KNEADER Capacity 25 Kg 224054.43 Thousand Fifty Four and Paisa Forty Nos

Rupees Forty Eight Thousand Two

347 2.00 WORK TALE WITH SINK, SINK SIZE-450X450X200mm. 48258.07 Hundred Fifty Eight and Paisa Seven Nos

Rupees One Lakh Forty Five

348 1.00 MASALA GRINDER CAPACITY 10 KG TILTING 145758.69 Thousand Seven Hundred Fifty Eight Nos

and Paisa Sixty Nine Only

Rupees One Lakh Twenty Two

349 1.00 PULVERISER CAPACITY 25 KG. 122121.88 Thousand One Hundred Twenty One Nos

and Paisa Eighty Eight Only

Rupees One Lakh Thirty Seven

350 1.00 POTATO PEELER, CAPACITY 10 Kg. 137879.24 Thousand Eight Hundred Seventy Nos

Nine and Paisa Twenty Four Only

Rupees Forty Eight Thousand Two

351 1.00 WORK TABLE WITH BOTTOM CROSS BRACING 48258.07 Hundred Fifty Eight and Paisa Seven Nos

Rupees Forty Two Thousand One

352 1.00 POTATO & ONION BIN TROLLEY 42102.76 Hundred Two and Paisa Seventy Six Nos

Rupees Fifty One Thousand Seven

PREPARATION AREA

353 1.00 51704.81 Hundred Four and Paisa Eighty One Nos

BUSSING TROLLEY 02 TIER

Rupees Seventy One Thousand Four

354 1.00 WORK TALE WITH SINK & 01 DRAWER, SINK SIZE-500X500X200mm. 71401.53 Hundred One and Paisa Fifty Three Nos

Rupees Six Thousand Eight Hundred

355 1.00 CHOPPING BOARD, 6894.23 Ninety Four and Paisa Twenty Three Nos

Rupees Forty One Thousand Three

356 2.00 GRABAGE BIN 41363.85 Hundred Sixty Three and Paisa Eighty Nos

Rupees Fifty Six Thousand Eight

357 1.00 WALL MOUNTED CABINET WITH SLIDING DOOR WITH BS & MS 56874.92 Hundred Seventy Four and Paisa Nos

Ninety Two Only

Rupees Seventy One Thousand Four

358 1.00 WORK TABLE WITH BOTTOM SHELF 71401.53 Hundred One and Paisa Fifty Three Nos

Rupees One Lakh Fifty Five Thousand

359 1.00 VEGETABLE CUTTING MACHINE 155114.43 One Hundred Fourteen and Paisa Nos

Forty Three Only

Rupees Ninety Six Thousand Five

360 1.00 MIXER JUICER GRINDER, SUJATA DYNAMIC 96515.40 Nos

Hundred Fifteen and Paisa Forty Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees One Lakh Seventy Nine

361 1.00 MEAT MINCER 179243.09 Thousand Two Hundred Forty Three Nos

and Paisa Nine Only

Rupees Two Lakh Twenty Four

362 1.00 02 DOOR VERTICAL CHILLER 224054.43 Thousand Fifty Four and Paisa Forty Nos

Rupees Ten Lakh Eighty Five

363 1.00 04 DOOR VERTICAL CHILLER 1085801.02 Thousand Eight Hundred One and Nos

Rupees One Lakh Fifty Five Thousand

364 1.00 STICK BLENDER 450mm. Length 155114.43 One Hundred Fourteen and Paisa Nos

Forty Three Only

Rupees Forty One Thousand Three

TEA/COFFEE PANTRY AREA

365 1.00 41363.85 Hundred Sixty Three and Paisa Eighty Nos

WORK TALE WITH SINK & 01 DRAWER, SINK SIZE-450X450X200mm

Rupees Twenty Four Thousand Six

366 1.00 TEA BOILER Capacity 10 Ltr 24621.26 Hundred Twenty One and Paisa Nos

Twenty Six Only

Rupees Forty Eight Thousand Two

367 1.00 MILK WARMER Capacity 25 Lt. 48258.07 Hundred Fifty Eight and Paisa Seven Nos

Rupees Twenty Eight Thousand Sixty

368 1.00 JUICER MACHINE MANUAL - for CITRUS 28068.00 Nos

Eight and Zero Paisa Only

Rupees Ninety Seven Thousand Five

369 1.00 JUICER MACHINE COLD PRESS 97500.60 Nos

Hundred and Paisa Sixty Only

Rupees Twenty Eight Thousand Sixty

370 1.00 CONTACT GRILLER DOUBLE 28068.00 Nos

Eight and Zero Paisa Only

Rupees Thirteen Thousand Seven

371 1.00 BREAD TOASTER 13787.70 Hundred Eighty Seven and Paisa Nos

Rupees Forty Eight Thousand Two

372 1.00 WORK TALE WITH BOTTOM SHELF 48258.07 Hundred Fifty Eight and Paisa Seven Nos

Rupees Twenty Seven Thousand Five

373 1.00 GRABAGE BIN TROLLEY 27576.15 Hundred Seventy Six and Paisa Nos

Rupees Fifty Three Thousand Four

FOOD LOADING AREA

374 1.00 53428.18 Hundred Twenty Eight and Paisa Nos

WORK TALE WITH SINK & 01 DRAWER, SINK SIZE-400X400X200mm.

Rupees One Lakh Eighty Nine

375 1.00 VEG. BAIN MARIE COUNTER 4 No. HOT & 01 No.-AMBIENTWITH GN PAN 189584.05 Thousand Five Hundred Eighty Four Nos

and Paisa Five Only

Rupees One Lakh Fifty Five Thousand

376 1.00 VEG. BAIN MARIE COUNTER 2 No. HOT & 01 No.-AMBIENT WITH GAN PAN 155114.43 One Hundred Fourteen and Paisa Nos

Forty Three Only

Rupees Seventy Five Thousand Eight

377 1.00 BOWL PACKING MACHINE 75833.47 Hundred Thirty Three and Paisa Forty Nos

Rupees Sixty Eight Thousand Nine

378 1.00 PLATE PACKING MACHINE 68939.99 Hundred Thirty Nine and Paisa Ninety Nos

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees Forty Thousand Six Hundred

379 1.00 WORK TABLE WITH BOTTOM SHELF & 01 DRAWER 40624.94 Twenty Four and Paisa Ninety Four Nos

Rupees Seventeen Thousand Seven

380 1.00 WALL MOUNTEDCABINET WITH BOTTOM SHELF 17727.05 Hundred Twenty Seven and Paisa Nos

Rupees Two Lakh Thirty Six

381 1.00 236365.06 Thousand Three Hundred Sixty Five Nos

TILTING BULK COOKER CAPACITY 150 LTR.

and Paisa Six Only

Rupees One Lakh Ninety Two

382 1.00 TILTING FRYING PANS CAPACITY 40 LTR 192046.33 Thousand Forty Six and Paisa Thirty Nos

Rupees Seventeen Thousand Seven

383 2.00 STOCK POT BURNER 17727.05 Hundred Twenty Seven and Paisa Nos

Rupees Twenty Four Thousand Six

384 1.00 2 BURNER GAS RANGE 24621.26 Hundred Twenty One and Paisa Nos

Twenty Six Only

Rupees Eleven Thousand Eight

385 1.00 WORK TALE WITH SINK, SINK SIZE-450X450X200mm. 11818.03 Hundred Eighteen and Paisa Three Nos

Rupees Fourteen Thousand Two

386 1.00 WORK TABLE WITH BOTTOM SHELF 14280.31 Hundred Eighty and Paisa Thirty One Nos

Rupees Fifty Three Thousand Six

387 1.00 IDLI STEAMER WITH STAND, CAPACITY 54 IDLIES 53674.48 Hundred Seventy Four and Paisa Nos

Forty Eight Only

Rupees Forty Eight Thousand Seven

388 1.00 DOSA PLATE PLAIN WITH BOTTOM SHELF 48749.92 Hundred Forty Nine and Paisa Ninety Nos

Rupees Two Lakh Six Thousand Eight

389 1.00 S.S. EXHAUST HOOD WITH S.S. BAFFLE FILTER 206819.25 Hundred Nineteen and Paisa Twenty Nos

Rupees Fifty Four Thousand One

390 1.00 PICK UP TABLE WITH BOTTOM SHELF 54167.09 Hundred Sixty Seven and Paisa Nine Nos

Rupees Eleven Thousand Eight

391 1.00 S.S. PIPE STAND 11818.03 Hundred Eighteen and Paisa Three Nos

Rupees Twenty Four Thousand Six

DIETICIAN KITCHEN

392 1.00 24621.26 Hundred Twenty One and Paisa Nos

WORK TABLE WITH DRAWER & BOTTOM SHELF

Twenty Six Only

Rupees Seventeen Thousand Seven

393 1.00 WORK TALE WITH SINK & BOTTOM SHELF, SINK SIZE-450X450X200 17727.05 Hundred Twenty Seven and Paisa Nos

Rupees Twenty Three Thousand Six

394 1.00 SALAMANDER ELECTRIC 23636.81 Hundred Thirty Six and Paisa Eighty Nos

Rupees Two Lakh Twenty Four

395 1.00 02 DOOR VERTICAL CHILLER 224054.43 Thousand Fifty Four and Paisa Forty Nos

Rupees Twenty Seven Thousand Five

396 1.00 INDUCTION DOUBLE 27576.15 Hundred Seventy Six and Paisa Nos

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees Forty Four Thousand Three

397 1.00 GRIDDLE/DOSA PLATE WITH BOTTOM SHELF 44318.73 Hundred Eighteen and Paisa Seventy Nos

Rupees Ninety Three Thousand Five

398 1.00 S.S. EXHAUST HOOD WITH S.S. BAFFLE FILTER 93561.27 Hundred Sixty One and Paisa Twenty Nos

Rupees Twenty Eight Thousand Five

399 1.00 2 BURNER GAS RANGE 28560.61 Hundred Sixty and Paisa Sixty One Nos

Rupees Twenty Three Thousand Six

400 1.00 ALMIRAH POWDER COATED 23636.81 Hundred Thirty Six and Paisa Eighty Nos

Rupees Forty Two Thousand One

401 1.00 WORK TABLE WITH DRAWER & BOTTOM SHELF 42102.76 Hundred Two and Paisa Seventy Six Nos

Rupees Fifty Eight Thousand One

402 1.00 58106.43 Hundred Six and Paisa Forty Three Nos

CHAPATTI PLATE WITH PUFFER PLATE

Rupees Forty Four Thousand Three

403 1.00 MARBLE TO TABLE 44318.73 Hundred Eighteen and Paisa Seventy Nos

Rupees Seventeen Thousand Seven

404 1.00 CHAPATTI COLLECTION TROLLEY 17727.05 Hundred Twenty Seven and Paisa Nos

Rupees Twenty Seven Thousand Five

405 1.00 S.S. EXHAUST HOOD WITH S.S. BAFFLE FILTER 27576.15 Hundred Seventy Six and Paisa Nos

Rupees Twenty Seven Thousand Five

DISH WASH & POT WASH AREA

406 1.00 27576.15 Hundred Seventy Six and Paisa Nos

SOILED DISH TABLE WITH GARBAGE CHUTE

Rupees Forty Four Thousand Three

407 1.00 LOADIND TABLE WITH 02 SINK & BOTTOM SHELF 44318.73 Hundred Eighteen and Paisa Seventy Nos

Rupees Forty Four Thousand Three

408 1.00 SS 2 SINK WITH 2 SIDE CROSS BARCING 44318.73 Hundred Eighteen and Paisa Seventy Nos

Rupees Twenty One Thousand Six

409 1.00 UNLOADING TABLE WITH BOTTOM SHELF 21667.14 Hundred Sixty Seven and Paisa Nos

Rupees Twenty Four Thousand One

410 2.00 S.S. STORAGE RACK WITH 05 SHELF 24128.66 Hundred Twenty Eight and Paisa Nos

Rupees Twenty One Thousand Six

411 2.00 S.S. POT RACK WITH 04 SHELF 21667.14 Hundred Sixty Seven and Paisa Nos

Rupees Twenty Four Thousand Six

412 2.00 AIR CURTAIN 24621.26 Hundred Twenty One and Paisa Nos

Twenty Six Only

Rupees Six Thousand Eight Hundred

413 2.00 INSECTO CUTTER 6894.23 Ninety Four and Paisa Twenty Three Nos

Rupees Two Lakh Forty One

414 2.00 HOSE REEL CAPACITY 50 FEET (5- HR-242-01) 241288.86 Thousand Two Hundred Eighty Eight Nos

and Paisa Eighty Six Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Rupees Eighty Three Thousand Seven

415 1.00 WATER COLLER CAPACITY 80 KG. 83712.91 Hundred Twelve and Paisa Ninety Nos

Rupees Eight Thousand Eight

416 1.00 GLASS STAND 02 TIER 8863.90 Hundred Sixty Three and Paisa Ninety Nos

Rupees Twenty Four Thousand Six

417 2.00 S.S. GRATING PIPE 24621.26 Hundred Twenty One and Paisa Nos

Twenty Six Only

Rupees Six Thousand Eight Hundred

418 2.00 S.S. GRATING PIPE 6894.23 Ninety Four and Paisa Twenty Three Nos

Rupees Two Thousand Four Hundred

419 1.00 S.S. GRATING PIPE 2462.28 Sixty Two and Paisa Twenty Eight Nos

Rupees Two Thousand Four Hundred

420 1.00 S.S. GRATING PIPE 2462.28 Sixty Two and Paisa Twenty Eight Nos

Rupees Thirteen Thousand Seven

421 1.00 GRABAGE BIN TROLLEY 13787.70 Hundred Eighty Seven and Paisa Nos

Rupees One Lakh Forty Two

422 2.00 PATIENT FOOD SERVICE TROLLEY 142803.80 Thousand Eight Hundred Three and Nos

Paisa Eighty Only

CURTAIN & IV HANGER SYSTEM

Supply, Installation, Testing & Commissioning of Curtain & IV Track System complete

with following as per technical specifications attached. Make: MPS/Hospital Engineer

Providing and installation of Cubical tracks system made of Powder coated Aluminium

alloy, mounted on the ceiling using Suspension hangers and bushes, powder coated wall Rupees Fourteen Thousand Six

423 100.00 bracket and Track Joiners wherever required. This system shall be complete with stain 14625.27 Hundred Twenty Five and Paisa Nos

free polyster fabric, Water repellent Curtains having 18" Net on top. The curtain shall be Twenty Seven Only

approx 7X4 feet, with two curtains stiched together wherever required. Curtains shall

also be provided with smooth movement, non sticking runners, with Stainless steel hooks,

for easy movement. The system shall have curtain removal points and end cap complete

as per technical specifications wherever is required.

Providing and installation of I.V. Hanger with 5 hooks, made from mirror finish stainless

steel, 304 grade with adjustable height, provided with 4/6 feet aluminium alloy track Rupees Twelve Thousand Seven

424 100.00 powder coated with endcap of tracks, 1 pc of trolley for smooth IV Hanger movement on 12753.52 Hundred Fifty Three and Paisa Fifty Nos

track, 2 pcs of suspension hanger powder coated, top & bottom bush, powder coated, for Two Only

easy fitting and better aesthetics complete as per technical specifications is required.

Point wiring for light/bell /Exhaust Fan with 2X1.5 sq. mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length in below type of pipe erected with 6A Modular type switch/bell

425 push & accessories and earth continuity of following type erected on

PVC/metallic/wooden Box single mounting base frame, covered with textured/metalic

white front plate modules erected on / in wall / ceiling as per pipe erected with necessary

lamp holder/ ceiling rose/ H.D Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

Rupees Four Hundred Eighty Five and

1839.00 Cat III 485.81 point

Paisa Eighty One Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires, in below type of pipe to be erected complete with earth continuity

and necessary connection with primary light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling Rupees One Hundred Sixty Seven and

complete Paisa Sixty Six Only

Point wiring for Fan with 2X1.5 sq. mm & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular type switch and num free EME four or

427 more step type electronic fan regulator with separately mounted and accessories with

earth continuity of following type erected on PVC/ metallic /wooden Box single mounting

base frame, covered with textured/ metalic white front plate modules erected on / in wall

/ ceiling as per pipe erected with necessary ceiling rose/ H.D Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

Rupees Six Hundred Seventy Four

a 560.00 Cat III 674.68 point

and Paisa Sixty Eight Only

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires erected in below type of pipe with 6A Modular type switches and following

428 type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling Rupees Six Hundred Three and Paisa

complete-Cat -III Ninety Eight Only

Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard

copper conductor wire in following type of pipe to be erected concealed in / flushed on

wall / ceiling, with 1.5 sq.mm copper conductor FRLS PVC insulated standard wire of

green colour for earth continuity of following size.

(A) With medium class Rigid PVC pipe and accessories

Rupees Sixty Two and Paisa Sixty Two

4519.00 (A) 2 wire 1.5 sq.mm 62.62 metre

Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked standard

copper conductor wire in following type of pipe to be erected in / on wall / ceiling, with

2.5 sq.mm copper conductor FRLS PVC insulated standard wire of green colour for earth

continuity of following size.

(A) with medium class Rigid PVC pipe and accessories

Rupees Eighty Two and Paisa Eighty

14526.66 (b) 2 wire 2.5 sq. mm 82.82 metre

Rupees One Hundred Twelve and

12800.00 (a) 2 wire 4 sq. mm 112.11 metre

Paisa Eleven Only

Rupees One Hundred Forty Seven and

750.00 (b) 2 wire 6 sq. mm 147.46 metre

Paisa Forty Six Only

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in Rupees Five Hundred Ten and Paisa

wall / ceiling as per pipe erected with following type of accessories.[I] For 6A Plug and 6 a Five Only

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board.(f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

Rupees Seven Hundred Forty Five

432 975.00 PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in 745.38 point

and Paisa Thirty Eight Only

wall / ceiling as per pipe erected with following type of accessories.[II] For 16A Plug and

16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.(f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in Rupees Eight Hundred Seventy One

wall / ceiling as per pipe erected with following type of accessories.[III] For 16A Plug and and Paisa Sixty Three Only

16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb

d b board.(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat. III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with Rupees Two Hundred Fifty Seven and

textured /metallic/white front plate modules erected on / in wall / ceiling with following Paisa Fifty Five Only

type accessories Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / Rupees Twenty Five and Paisa

metallic/white front plate , modules erected with necessary connections as per site Twenty Five Only

situation directed by Engineer In charge. (7) Blank Plate Single Cat.III

Providing & Erecting approved make following size of TV Co-axial flexible cable

comprising inner conductor of solid bare copper insulated with Foam PE & Secondary Rupees Thirty Nine and Paisa Thirty

conductor made of poly- Aluminium film bonded Al. Braids @ suitable coverage overall Nine Only

sheathed with black PVC insulation. b).RG-6

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS

Rupees Twenty and Paisa Twenty

437 2200.00 PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in 20.20 Mtr.

existing pipe. of following size of conductors & nos.of pairs. With necessary

connections.[A] Conductor Size 0.5 mm (a) Unarmoured 2) Two Pairs

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Rupees Twenty Four and Paisa

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Twenty Four Only

approved manner as directed.(a)20 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Rupees Thirty Three and Paisa Thirty

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Three Only

approved manner as directed.(b) 25 mm

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Rupees Fifty Four and Paisa Fifty Four

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in Only

approved manner as directed.(c) 32 mm

Providing and fixing approved make Perforated C type cable tray. Made from pre-

galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 . with max

Rupees Four Hundred Seventy One

441 350.00 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and 471.67 Mtr.

and Paisa Sixty Seven Only

washers etc. erected on existing support as per Specification and as per instruction of

engineer in charge..(5) 300 X 50 X 1.5 mm Thick

Providing and fixing approved make Perforated C type cable tray. Made from pre-

galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 . with max

Rupees Three Hundred Twenty Two

442 475.00 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and 322.19 Mtr.

and Paisa Nineteen Only

washers etc. erected on existing support as per Specification and as per instruction of

engineer in charge.. (3) 150 X 50 X 1.5 mm Thick

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

Rupees One Hundred Sixty and Paisa

443 50.00 metallic/white front plate , modules erected with necessary connections as per site 160.59 each

Fifty Nine Only

situation directed by Engineer In charge.(3)Two pin RJ-11 Telephone socket with top [A]

For One Gang Cat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / Rupees One Hundred Sixty and Paisa

metallic/white front plate , modules erected with necessary connections as per site Fifty Nine Only

situation directed by Engineer In charge.(4) TV Co-axial Socket outlet Cat. III

Providing & erecting Switch board for Computer or electric apparatus consisting of

following modular type accessories mounted with PVC / Metallic concealed/open box

Rupees One Thousand One Hundred

with single mounting base frame covered with textured/metallic /white front

445 80.00 1133.22 Thirty Three and Paisa Twenty Two each

plate,modules erected with necessary connections as directed. 1 no. 6A/16A universal

plug-switch combined.3 nos. 6A Switch 3 nos. 6A 5 pin Plug .For Modular Type

Accessories Cat.III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 Rupees Three Hundred Seventy Three

lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 and Paisa Seventy Only

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder coated and

high U.V. & corrosion resistance with diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 Rupees One Thousand Seven

447 750.00 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting 1794.77 Hundred Ninety Four and Paisa each

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Seventy Seven Only

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (B) LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete.IP20 (vi) 36 watts, 24" x 24", Surge-

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

Rupees One Thousand Nine Hundred

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

448 560.00 1948.29 Forty Eight and Paisa Twenty Nine each

complete having 3blades with aluminium blades with , canopy & 30 cm. down rod

erected with earthing.(Make shall be approved by Engineer in charge)

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod

Rupees One Hundred Eight and Paisa

449 350.00 erected duly painted for fan complete with proper insulation without leakage and 108.07 each

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up

Rupees One Hundred Eight and Paisa

450 560.00 to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box 108.07 each

complete erected concealed in Ceiling with necessary finishing.

Rupees One Thousand Three

Supplying & erecting approved make low noise decorative exhaust fan having square

451 100.00 1366.53 Hundred Sixty Six and Paisa Fifty each

frame ABS body with inbuilt lowers & square frame.250mm with 1350 RPM Cat.II

Supplying & erecting single phase approved make industrial exhaust fan suitable for

Rupees Two Thousand Fifty Four and

452 61.00 medium duty ring mounted low noise operation suitable for medium duty having 2054.34 each

Paisa Thirty Four Only

following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM Cat.II

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by

Rupees Fifty Five Thousand Eight

15˚C within a hour, The water cooler should be comprising of hermetically sealed

453 10.00 55893.40 Hundred Ninety Three and Paisa each

compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel.

Rupees Five Thousand Four Hundred

Supplying and erecting water filter cum purifier with ultra violate technology.

454 10.00 5424.71 Twenty Four and Paisa Seventy One each

(Aquaguard / waterdoc model or equivalent symphony/ crystal/videocon model)

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking

arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with Rupees Forty Two and Paisa Forty

accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & Two Only

erected on wall / ceiling of following size .(4) 40 mm

Supplying & erecting Approved make call bell indicator with buzzing sound and Red light

Rupees One Hundred Forty Eight and

456 30.00 indicating lamp with Red light button to attend the call suitable for 240 v 50 c/s supply 148.47 each

Paisa Forty Seven Only

Rupees Seventy One and Paisa

457 10.00 Decorative call bell Ting-tong box type 250 volts complete erected 71.71 each

Seventy One Only

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC/Metal board Rupees Two Hundred Fifty and Paisa

having portable bell push working on D.C. & bell on 230V A.C. supply with cells / battery Forty Eight Only

Supplying and erecting approved make online Un-interruptible Power Supply system

comprising flat cum-boost charger with IGBT base rectifier & Inverter & sealed

maintenance free SMF batteries. The charger having operating capacity for input 160-

Rupees Two Lakh Seventy Thousand

270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with

459 2.00 270989.06 Nine Hundred Eighty Nine and Paisa each

battery, over/under voltage output with over load & short circuit protection equipment.

The system housed in CRC sheet duly powder coated paint with following power

backup.with MS painted batteries stand, 10% Overload capacity for momentary load.(I)

10 KVA 3 - phase with 1Hr Backup

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible

universal slots. Inbuilt Auto attendant facility, Minimum 15 Nos. conference, Analog

extension line, Calling GSM, E&M line, PRI / EI & VOIP program me through Analog

telephone digital key from Ethernet, public address cord, shall have unrestricted

simultaneous dialing facility, QSIG protocol on PRI, 95 / STD / ISD / Local-Locking, Class

of Service, Quick Dial-Single Digit dialing of any two external number, Once only ring

Rupees One Lakh Twenty Two

device, Chairman / Secretary - Do not disturb Facility, Power Down Mode, Hot Line, Hot

460 1.00 122761.46 Thousand Seven Hundred Sixty One each

Outward Dialing, Day Night Mode, Auto Call Back, Barge-in, Call Pick Up & Call Transfer,

and Paisa Forty Six Only

Call transfer while Ringing with Voice Guide System, (DISA), Caller ID (CLI), CLI Base ECF,

CLI Base routing Internet Ready Port, External Music Port, Call Budgeting, Call Most

Calculation (ASMDR), DID Direct Inverse Dialing, External Music Input, Fax Homing,

Global Directory Printing with following capacities [[Approved by Competent Authority

i.e. not Below the rank of Executive Engineer [E] No. Extension - 64 , No. of Junction -16

No. of expandable ports -256 , Operators Console -01 Compatible - ISDN & networking

Supplying & erecting push button type telephone instrument having speaker phone Caller

Rupees Eight Hundred Ninety Eight

461 40.00 ID & speaker phone with one touch memory (min.6 nos.)& 99 memories with display 898.90 each

and Paisa Ninety Only

system Single line

Supplying & erecting approved make LAN cable of following size in existing pipe as per Rupees Forty Seven and Paisa Forty

direction [C] CAT - 6 Seven Only

Supply & installation of modular type accessories for U PVC snap-on adaptable

Rupees Five Hundred Sixty Six and

463 35.00 trunking/Pop up Box with required items erected with necessary connection. As desired 566.61 each

Paisa Sixty One Only

by Engineer In charge vi) Cat-6 LAN Socket cat-III

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and flame proof confirming BS with necessary Rupees Two Hundred Seventy Seven

end caps Internal and external bend, flat bends, coupler, tee etc..All necessary accessories and Paisa Seventy Five Only

and measuring of following sizes (1) 75 mm x 50 mm trunking

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and flame proof confirming BS with necessary Rupees Four Hundred Twenty Eight

end caps Internal and external bend, flat bends, coupler, tee etc..All necessary accessories and Paisa Twenty Four Only

and measuring of following sizes (2) 100 mm x 50 mm trunking

Supply & installation of surface mounted U PVC snap-on adaptable trunking raceways,

fabricated out of U-PVC to Off-White or approved shade as per IS 733 of thickness 2.0mm

for the base and sides with all accessories like removable covers, joints ,height Rupees One Thousand Thirteen and

spacer,angles complete with necessary bends, suitable sized junction boxes and tees etc, Paisa Three Only

Complete. (a)Size: 50x80mm PVC Raceways for Power & Data with 2 compartments

above specifications.

Supply & installation of surface mounted U PVC snap-on adaptable trunking raceways,

fabricated out of U-PVC to Off-White or approved shade as per IS 733 of thickness 2.0mm

for the base and sides with all accessories like removable covers, joints ,height Rupees One Thousand Eight Hundred

spacer,angles complete with necessary bends, suitable sized junction boxes and tees etc, Thirty Five and Paisa Seventeen Only

Complete. (b)Size: 50x130 mm PVC Raceways for Power & Data with 2 compartments

above specifications.

Rupees Forty Four Thousand Four

468 2.00 LG 139 cm (55 Inch) 4K ultra HD Smart LED TV 44429.90 Hundred Twenty Nine and Paisa each

IT No Description of Work Estimated Rates Unit Total Amount

IT No Description of Work Estimated Rates Unit Total Amount

SITC of 3LCD Lamp based projector having wxga (1280x800) or better resolution with

minimum white brightness of 3800 lumens and color brightness of 3800 lumens. The

projector should have minimum 1HDMI,1VGA input. Having contrast ratio of 15000:1 or

Rupees Thirty Three Thousand Eight

more. the projector should have auto vertical key stone correction of +/- 30 degree and

469 1.00 33895.60 Hundred Ninety Five and Paisa Sixty each

Manual Horizontal of +/-30 degree. the projector should have optical lens, throw ratio

1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual having focal length 16.9mm to

20.28mm. projector should have features like AV mute slide, quick corner and split

function and should support wireless functionality with inbuilt wifi or wifi dongle.

SITC of universal Projector mounting kit, with necessary grouting, fasteners etc. with Rupees Six Thousand Eight Hundred

adjustable height and suitable for all types of projectors Forty Eight and Paisa Eighty One Only

Rupees Three Thousand Three

471 1.00 SITC of 84 inch Self Lock MW (6 x 4) Instalock Slow Retraction Screen, Aspect Ratio-4:3 3379.46 Hundred Seventy Nine and Paisa each

Supplying & erecting Amplifier having following specification:

Power Output :65 W (RMS)

lnputs : 4 Mics & I Aux Rupees Four Thousand Eight

472 1.00 frequency Response :65-13000 Hz+ 3db 4879.31 Hundred Seventy Nine and Paisa each

Tone Controls : Cut type Thirty One Only

Speaker Matching :4-8-16 ohms 100 V line

The amplifier suitable to operate 240V A.C.or 12volt D.C. (Battery) with automatic

changeover from AC to Battery operation, duly protected by wrong Battery Polarity

SITC of Gooseneck microphone

Unidirectional condenser microphone

Flexible stem Rupees Twelve Thousand Forty Six

Phantom powered by amplifier and Paisa Twenty Seven Only

On/off sliding switch with priority contact

Supplied with fixed 2 m (78 in) cable and lockable DIN connector

SITC of Gooseneck microphone

Unidirectional condenser microphone

Flexible stem Rupees Two Thousand Five Hundred