Tahasil office at Gop_Building

Earthwork in excavation of foundation in hard soil including dressing and levelling the bed up to the required depth & removing the excavated earth & depositing the same away from the work site within initial lead of 50 mtr & initial lift of 1.5 mtr, including cost of labour T&P articles required for the work including shoring, shuttering, propping & dewatering if required, etc. complete in all respect as per the specification & direction of the Engineer-in-Charge.

Supplying and filling in foundation trenches and plinth with sand, well watered and rammed in layers not exceeding 15cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.

Providing Plain cement concrete (1:3:6) using 40mm. Size black hard hand broken granite stone chips of approved quality from approved quarry using ordinary Portland cement (OPC), screened and washed sharp sand for mortar including lowering, laying and compacting concrete in layers not exceeding 15cm.thick, watering and curing, including cost, conveyance, royalty and taxes of all materials, all labour sundries and T&P required for the work, including shoring, shuttering, dewatering if required including hire and running charges of all machineries etc. complete as directed by the Engineer-in-charge.

Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction, expansion and construction joints, applying sealant, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification as per direction of the Engineer-in-Charge.

Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris within 50 mtrs lead including cost of labour, T&P required for the work as per the direction of the Engineer-in-Charge.

12 mm thick Cement Plaster in C.M. (1 : 6 ) using good coarse river Sand of approved quality finished smooth over Brick Masonary after racking out joints including watering, curing with cost , conveyance , royalty taxes of materials all labour and T&P articles required for the work etc. complete in all respect as per direction of the Engineer in charge.

16 mm thick Cement Plaster in C.M. (1 : 6 ) using good coarse river Sand of approved quality finished smooth over Brick Masonary after racking out joints including watering, curing with cost , conveyance , royalty taxes of materials all labour and T&P articles required for the work etc. complete in all respect as per direction of the Engineer in charge.

Wall painting two coats to walls with plastic emulsion paint of approved shade on old work one coat including cost of paint including cost of all materials, labour, T&P required for the work as per the direction of the Engineer-in-Charge.

Wall painting two coats to walls with weather coat paint of approved shade with cost of paint including cost of all materials, labour, T&P required for the work as per the direction of the Engineer-in-Charge.

Supplying fitting & fixing of M.S Iron door & windows with grills of approved design including cost of all materials, labour T&P required for the work etc. Complete in all respect as per direction of the Engineer in charge.