PROVN OF INFRASTRUCTURE FOR SOLID WASTE MANAGEMENT AND ADDN ALTN TO BLDG NO P-12/5, PROVN OF DEEP FREEZER OF 400 LTR CAPACITY, PROVN OF 08 NOS ELECT POLE, PROVN OF SECURITY LIGHT AT FOL STORE AT MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in soft / disintegrated rock complete all as specified and directed.

Rough excavation not exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/disintegrated rock each not exc. 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, inlayers n.exc. 25cm in and getting out complete all as specified.

Demolition of cement concrete (Un reinforced) of any description of any description and in any position not otherwise specifically provided for

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.

Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed.

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removing excavated material n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

M & L for Plain Cement Concrete type D2, 1 : 4 : 8 (40 mm graded aggregate) as in foundation filling and mass concrete for embedding of posts etc complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders

Supply only water proofing compound, complete all as specified and directed.

M & L for Plain Cement Concrete type C2, 1 : 3 : 6 (40 mm graded aggregate) as in foundation filling and mass concrete for embedding of posts etc complete all as specified and directed.

M&L for Hardcore Broken stone or boulders of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick ,watered and rammed to a true surface

M&L for Hardcore Broken Bricks of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick ,watered and rammed to a true surface

M&L for 150mm thick PCC in 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in subbase of floors etc, complete all as specified and directed.

Providing cement concrete 75 mm thick type B-2 (1:2:4) using 40 mm graded agg as in floor finishing cement concrete surface even and smooth without using extra cement .

M & L, Non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed

Material & Labour for glazed joint free coloured ceramic tiles 7 to 8 mm thick in vertical surface as in skirting & dado, area of each tile exceeding 0.06 sqm but not exceeding 0.16 Sqm set & jointed in neat cement slurry & pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F for steel work as in tubular truss incl special shaped washer etc complete using erw or induction butt weld ed tubes confirming to IS 1161-1979 gde st-240,including gusset plate pole etc .

S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed.

M&L for rolled sections as in framing for cladding, stiffner,glazing and the like fixed with angle cleats and connecting plates, etc complete all as specified and as directed.

S&F for Rolled sections as in main and cross beams , hip and jock rafters , purlins where connected to common rafter and running rails and guides for cattle trap,culvert etc in Fe 290(Gde-E 165.

M&L for 100 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of floors etc, complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound grade 'A'

Finishing surface to concrete roads, pavements, by brooming

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply & fix purpose made crew bolts with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut 16-20 mm dia and exc. 22cm and nexc. 30 cm long complete all as specified and as directed.

S&F Plates (plain or chequered) channels , square cut or notched forming holes ,with out any attachment in Fe 290-(Gde E-165)

M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding, in ridges, hips, valley gutters, drip and straight flashings to wall, fixed with self tapping screws as specified

Material & Labour for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 (20mm graded stone aggregate) exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4 finished the plaster surfaces fair and even complete all as specified and directed.

M & L for preparation of New plastered surface of walls and applying two coats of exterior emulsion paint 1st quality (anti dust Apex ultima of Asian Paints or equivalent in Berger/Shalimar) paint over 1mm thick layer of wall care putty complete all as specified and directed. Note:- The tint/ shade of the paint shall be as approved by the GE.

M&L three coats of white wash on walls including preparation of new plastered surface and complete all as specified.

S&F Hard drawn steel wire fabric cut to length, bent to shape required and tying with and including mild steel wire (annealed) not less than o.9mm dia weight not exceeding 4.00 kg per sqm including welding to existing frame work complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed

S & F machine pressed rubber moulded coloured precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation.

Supply & Fix Rolled mild steel framed work as in doors frame or gates of angle or other section with gusset plates, rails, braces etc.,compelete drilled for fixing of steel sheeting or other covering . Doors etc. to be prepared for hanging or sliding with and incl. either hooks and hinges or steel hanging door fittings (exclsive of steel sheeting or other covering , running rails and guides) and hanging, also fastening and fixing compelete

Supply & Fix mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc. with ends of barsshouldered and / or riveted or forged into spikes, and similar work confirming to Fe 290.Gde-E-165 compelete.

M & L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel over a coat of primer complete all as specified

M&L, preparation old previously treated steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed.

Preparing new zinc(or galvanised) surfaces to receive painting , by coating with mordant solution including washing and cleaning etc

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F 0.63 mm thickness Galvanised corruated mild steel sheeting side lap fixed with coach screws and washers with L-type or j type or cranked hook bolts in lieu of screws in roof ,walls etc with grade of zinc coating 275.

Refixing 0.63 mm thickness Galvanised corruated mild steel sheeting side lap fixed with coach screws and washers with L-type or j type or cranked hook bolts in lieu of screws in roof ,walls etc with grade of zinc coating 275.

S&F 0.63 mm thickness Plain Galvanised mild steel sheeting in ridges hips ,valley gutters ,drip and straight flashings side lap fixed with coach screws and washers with L-type or j type or cranked hook bolts in lieu of screws in roof ,walls etc with grade of zinc coating 275.

M & L, cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.

Extra for forming fair finished drains or channel 30 Cm inner girth in cement concrete , using extra cement including form, moulds, mitred / stopped ends etc complete as specified and directed.

M & L PCC Type B1 1:2:4 (20 mm graded stone aggregate ) as in coping ,side kerbs etc complete all as specified and as directed .

Material & Labour for Providing precast cement concrete type B1 (1:2:4) 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in cement mortar ( 1:6 ) complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6, type C-2, as in pavings/hard standing/path/Plinth protection etc finished even & smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction complete all as specified & directed.

S&F Oval type Wash Hand Basin superior quality 550 x 400 mm size fitted and including granite top over RCC slab incl waste coupling 150mm long & suitable bottle trap complete all as specified and directed.

Supply & Fix 15 mm dia pillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered "Hot or Cold" with long swan neck swivel type screwed for iron pipe and fixed complete all as specified and directed.

S & F Soap dish chromium plated any size fixed to plugs with chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S & F shelf/ corner shelf of PTMT with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight-300 gms) complete all as specified and directed.

S & F Aluminium Hat and coat peg sets of 6 pegs complete.

Granite (of any type) work (table rubbed and polished) 20mm thick in steps jambs,pillars, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.

S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required.

Supply & Fix 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to concealed in walls and ceiling or laid in floor complete all as specified and directed.

S&F 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed

Supply & Fix 1000 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.

S&F Stop valves/Angle valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F mild steel barrel tower bolt stove enameled black 200 mm size with bright bolt complete all as specified and directed.

S&F mild steel pressed handle oval type 150 mm size, stove enameled black complete all as specified and as directed .

Supply & Fix 300mm long Mild steel sliding door bolt , plate type stove enamelled black with bright not less than 16mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed.

E&M Portion: M&L for point wiring Concealed with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :- (a) One light point/Fan point controlled by one, one way switch of 5/6 Amps.

(b) Ditto but One 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.

(c) Ditto but One 3/5 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board.

(d) Ditto but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F Switch piano, flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.

S&F Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S&F Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.

S&F Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), flush type, non shutters, non inter locking type, complete all as specified and directed.

S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S F Fixing electronic fan regulator any type on the existing phenolic laminated sheet AC, SP 230 volts complete as all specified and directed.

Supply and Fixing LED Bulk head Fitting environment friendly , IP-65/66, ultra modern,energy saving,surface mounting,decorative oval comprising of high brightness LED 10 Watt,6000 K complete all as specified and directed.

Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x20 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing LED Integrated Batten T5 box type surface mouted, (1x09 Watt) prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S & F 1x25 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.

S & F 30 Watt flood light , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same with necessary cutting / bending /welding and fixed the same with clamps duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized iron strip of size 25x4 mm by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc. complete all as specified and directed.

Supply and laying XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.

S&F of Sub main wiring with two single run of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface/concealed type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly, complete all as specified and directed.

Supply and Fixing MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 415 volts, made out of 16 guage sheet steel double door including grauting suitable for housing MCB's and isolators, complete all as specified and directed.

S&F of MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

S&F MCB DB sheet metal enclosure for DB, SPN, 4 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

Supply and Fix of MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

Supply and Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.

S&F of MCB Triple pole & Neutral 415 volts, 63 amps, of 10 KA complete all as specified and directed.

Supply and fixing steel body exhust fan AC single phase 230/240V OF size 450 mm sweep with louvrs complete all as specified and directed.

Supply and fixing PVC fresh air fan, single phase 230/240 V OF size 250 mm sweep 1400 RPM with suitable louvers and making connections with twisted copper flexible wire complete all as specified and directed.

M & L for cutting, opening circular/ Rectangular in shape hole on wall of fixing of exhaust fan of size 300/200/450 mm sweep including plastering and making good the disturbed surface and surrounding complete all as specified and directed.

Supply and fixing LED streel light fitting powder coated pressure die cast aluminium housing of capacity 35 W with heat resistant toughned glass conforming to IP 65 protection with internal and external surge protection upto 5 KV complete all as specified and directed by Engineer in Charge.

Supply and fixing Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) including painting of poles with two coats of synthatic enamel paint in Red and White strips upto 1.5 mtr height from coping over a coat of red oxide primer including numbering of poles as directed by Engineer in charge.

Supply and fixing street light bracket made out of 40 mm dia GI pipe light grade of length upto 1.5 mtr bent to shape required with and including 2 Nos, 50 x 6 mm MS flat iron clamps with nuts, bolts, washer etc complete all as specified and directed.

Supply and fix loop-in loop-out box of size 20x20x15cm made of 1.6mm thick PVC sheet weather proof, dust and vermin proof with hinged door of locking arrangements and slanting cover on top with provision of aluminium busbar of size 25 x 2mm - 4 No fixed on insulator complete fixed on pole with and including suitable size MCB SP 6 amp, MS flat iron clamps, nuts, bolts and washers, etc

M & L for cement conceret in foundation filling and mass concrete(Type D2 1:4:8 (40 mm graded stone aggregate) all as specified and directed.

M & L for cement conceret in foundation filling and mass concrete(Type B2 1:2:4 (40 mm graded stone aggregate) all as specified and directed.

Material and labour for PCC 1:3:6 type C-2,using stone aggregate 40mm graded as in foundation of stays and coping of poles including necessary form work where required and fair finish to the exposed surfaces all as specified & directed.

Supply and fixing of PVC insulated and sheathed multi stranded twin core copper conductor of size 1.50 Sqmm complete all as specified and directed.

Supply and laying for XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 3.5 core x 95 Sqmm including laying, testing and commissioning complete all as specified and directed.

Supply and laying for XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 25 Sqmm including laying, testing and commissioning complete all as specified and directed.

Supply and laying for XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 2 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.

Supply and laying for XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.

M & L for sand cushioning with dry and clean sand over and under the under ground cable in trenches , ducts for cable protection incliding levellling and consodilation complete all as specified and directed.

M&L for GI tubing 40 mm dia light grade for cable protection all as specified and directed.

M&L GI tubing medium grade complete with all fittings laid in trenches/ walls for the size 50 mm dia bore all as specified and directed.

M&L GI tubing medium grade complete with all fittings laid in trenches/ walls for the size 40 mm dia bore all as specified and directed.

M&L GI tubing medium grade complete with all fittings laid in trenches/ walls for the size 25 mm dia bore all as specified and directed.

M&L GI tubing medium grade complete with all fittings laid in trenches/ walls for the size 20 mm dia bore all as specified and directed.

S&F Gun metal gate valve screwed both end with iron head wheel size 20 mm dia bore including suitable fittings all as specified and directed.

S&F Gun metal gate valve screwed both end with iron head wheel size 25 mm dia bore including suitable fittings all as specified and directed.

S&F Gun metal gate valve screwed both end with iron head wheel size 50 mm dia bore including suitable fittings all as specified and directed.

Supply and fixing powder coated pressure die cast aluminium compact LED street light fitting heat resistance toughened glass with lens,driver and surge protector suitable for 45 Watt single phase 230 Volt 50 Hz ,IP 66 protection complete all as specified and as directed.

Supply and fixing powder coated pressure die cast aluminium compact LED street light fitting heat resistance toughened glass with lens,driver and surge protector suitable for 60 Watt single phase 230 Volt 50 Hz ,IP 66 protection complete all as specified and as directed.

M& L for erection, in truly vertical position, LT Steel tublar swaged pole complete with cast iron base plate finial taper plug, bolt , nut and screwed type 410 SP 31 09 mtrs long Class -10 including painting of poles with two coats of synthatic enamel paint in black and white strips upto 1.5 mtr height from coping over a coat of red oxide primer including numbering of poles and making holes for street lights connection wire/conductor cable complete all as directed. Note : PCC, Earth work and MS work as cross arms clamps etc will be measured and paid separately.

Supply laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (heavy duty) with stranded aluminium copper conductor , 1100 volts grade of size 4 core 10 Sqmm complete all as specified and directed.

Supply only cable twin core PVC insulated and unsheathed solid aluminium conductor of size 2.50 Sqmm complete all as specified and directed.

Supply and fixing street light bracket made out of 40 mm dia GI pipe light grade of length upto 1.5 mtr bent to shape required with and including 2 Nos, 50 x 6 mm MS flat iron clamps with nuts, bolts, washer etc and applying one coat of aluminium paint to clamps complete all as specified and directed.

Supply and fix loop-in loop-out box of size 40x20x20cm made of 1.6mm thick PVC sheet weather proof, dust and vermin proof with hinged door of locking arrangements and slanting cover on top with provision of aluminium busbar of size 25 x 2mm - 4 No fixed on insulator and one MCB of capacity 6 Amps complete fixed on pole with and including suitable size MS flat iron clamps, nuts, bolts and washers, etc complete all as specified and directed.

M&L local sand dry, filling in trenches around under ground cable complete all as specified and directed.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

Cutting of floor/wall/road/footpath for laying of LT U/G cable of any size/description and making good the same as per existing specification after laying the cable and all as specified & directed.

S & F of GI pipe light grade 40 mm bore for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc complete all as specified & directed.

Material and labour for PCC 1:3:6 type C-2,using stone aggregate 40mm graded as in foundation of stays and coping of poles including necessary form work where required and fair finish to the exposed surfaces all as specified & directed.

Supply and installation commissioning of metal top deep freezer single phase 240 volts,50 Hz,capacity 405 ltrs complete all as specified and directed.

S & F Voltage stablizer auto cut single phase, 220/240 volts fitted with high/low voltage cut off relays, time delay relay & arrangement & push button / switch for instant start, suitable for input voltage 165 V TO 250 Volts and out put voltage stabilizer between 220 V TO 230 Volts of capacity 5 KVA.