Renovation of Shyamly guest house at GM Complex in Chirimiri Area

Item Description

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metre lead. : For thickness of tiles above 10 mm and upto 25 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. : Size of Tile 1000x1000 mm

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. : 30 mm thick plain PVC door shutters

Providing and fixing Jaquar make or equivalent Square Shape Single Flow Maze Overhead Shower - Chrome including cost of fixing necessary fittings. Registered Design No : OHS-CHR-1629

Providing and fixing Jaquar make or equivalent Shower Arm 600X25X25mm Square Shape for Wall Mounted Showers with Flange. including cost of fixing necessary fittings. Registered Design No : SHA-CHR-455L600

Providing and fixing Jaquar make or equivalent Aquamax Concealed Body of Single Lever Shower Mixer with 3-way diverter, But without Exposed Parts including cost of fixing necessary fittings. Registered Design No : ALD-CHR-783N

Providing and fixing Jaquar make or equivalent Aquamax Exposed Part Kit of Single Lever Shower Mixer with 3-way diverter (Compatible with ALD-783N) including cost of fixing necessary fittings. Registered Design No : KUP-CHR-35783NKPM

Providing and fixing Jaquar make or equivalent Kubix Prime Bath Spout with Diverter & Wall Flang including cost of fixing necessary fittings. Registered Design No : SPJ-CHR-35463PM

Providing and fixing Jaquar make or equivalent Flexible Tube 12mm dia & 1.5M Long with Nuts including cost of fixing necessary fittings. Registered Design No : SHA-CHR-549D12

Providing and fixing Jaquar make or equivalent Premium Wall Bracket for Hand Shower, 35mm dia. & 100mm Long Round Shape including cost of fixing necessary fittings. Registered Design No : SHA-CHR-555

Providing and fixing Jaquar make or equivalent Maze Hand Shower 95X95mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body) with Rubit Cleaning System including cost of fixing necessary fittings. Registered Design No : HSH-CHR-1655

Providing and fixing Jaquar make or equivalent Concealed Body for Single Lever Basin Mixer Wall Mounted, But without Exposed Parts including cost of fixing necessary fittings. Registered Design No : ALD-CHR-233N

Providing and fixing Jaquar make or equivalent Exposed Part Kit of Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout (Compatible with ALD-233N or ALD-235N) including cost of fixing necessary fittings. Registered Design No : KUP-CHR-35233NKPM

Providing and fixing Jaquar make or equivalent Click Clack Waste 32mm Size Full Thread With 130mm Height including cost of fixing necessary fittings. Registered Design No : ALD-CHR-727L130

Providing and fixing Jaquar make or equivalent Table Top Basin, Size: 600x380x130 mm, Shape: Rectangular including cost of fixing necessary fittings. Registered Design No : LAS-WHT-91905

Providing and fixing Jaquar make or equivalent Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange including cost of fixing necessary fittings. Registered Design No : ALD-CHR-769L300X190

Providing and fixing Jaquar make or equivalent Metropole Flush Valve Dual Flow 40mm Size (Concealed Body) with Concealed Shut off Provision & Rectangular Dual Flush Plate, ABS Chrome Plated (3.0/6.0 Lts. Per Flushing) including cost of fixing necessary fittings. Registered Design No : FLV-CHR-1089DFP

Providing and fixing Jaquar make or equivalent Wall Hung WC with UF soft close seat cover, Hinges and Accessories Set, Size : 350x750x340 mm including cost of fixing necessary fittings. Registered Design No : DIS-WHT-93951UF

Providing and fixing Jaquar make or equivalent 2 Way Bib Cock with Wall Flange including cost of fixing necessary fittings. Registered Design No : KUP-CHR-35041PM

Providing and fixing Jaquar make or equivalent Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook including cost of fixing necessary fittings. Registered Design No : ALD-CHR-573

Providing and fixing Jaquar make or equivalent Towel Ring Square - Chrome including cost of fixing necessary fittings. Registered Design No : AKP-CHR-35721P

Providing and fixing Jaquar make or equivalent Soap Dish Holder - Chrome including cost of fixing necessary fittings. Registered Design No : AKP-CHR-35731P

Providing and fixing Jaquar make or equivalent Soap Dispenser with Glass bottle including cost of fixing necessary fittings. Registered Design No : AKP-CHR-35735P

Providing and fixing Jaquar make or equivalent Tumbler Holder - Chrome including cost of fixing necessary fittings. Registered Design No : AKP-CHR-35741P

Providing and fixing Jaquar make or equivalent Towel Rack 600mm long without Lower hangers, Stainless Steel including cost of fixing necessary fittings. Registered Design No : AKP-CHR-35781PFS

Providing and fixing Jaquar make or equivalent Toilet Roll Holder with Stainless Steel Flap including cost of fixing necessary fittings. Registered Design No : AKP-CHR-35753PS

Providing and fixing Jaquar make or equivalent Angular Stop Cock with Wall Flange including cost of fixing necessary fittings. Registered Design No : KUP-CHR-35053PM

Providing and fixing Jaquar make or equivalent Overhead Shower 180mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System including cost of fixing necessary fittings. Registered Design No : OHS-CHR-1759

Providing and fixing Jaquar make or equivalent Shower Arm 20mm dia. & 450mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Flange including cost of fixing necessary fittings. Registered Design No : SHA-CHR-479L450

Providing and fixing Jaquar make or equivalent Concealed Body for Single Lever High Flow Diverter with Button Assembly, But without Exposed Parts including cost of fixing necessary fittings. Registered Design No : ALD-CHR-079N

Providing and fixing Jaquar make or equivalent Single Lever Exposed Parts Kit of Hi-flow Diverter Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve & Button (Compatible with ALD-079N) including cost of fixing necessary fittings. Registered Design No : OPP-CHR-15079NKPM

Providing and fixing Jaquar make or equivalent Bath Tub Spout with Button attachment for Hand Shower with Wall Flange including cost of fixing necessary fittings. Registered Design No : SPJ-CHR-15463PM

Providing and fixing Jaquar make or equivalent Flexible Tube 12mm dia & 1.5M Long with Nuts including cost of fixing necessary fittings. Registered Design No : SHA-CHR-549D12

Providing and fixing Jaquar make or equivalent Premium Wall Bracket for Hand Shower, 35mm dia. & 100mm Long Round Shape including cost of fixing necessary fittings. Registered Design No : SHA-CHR-555

Providing and fixing Jaquar make or equivalent Hand Shower 100mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System including cost of fixing necessary fittings. Registered Design No : HSH-CHR-1937

Providing and fixing Jaquar make or equivalent Concealed Body for Single Lever Basin Mixer Wall Mounted, But without Exposed Parts including cost of fixing necessary fittings. Registered Design No : ALD-CHR-233N

Providing and fixing Jaquar make or equivalent Exposed Part Kit of Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout (Compatible with ALD-233N or ALD-235N) including cost of fixing necessary fittings. Registered Design No : OPP-CHR-15233NKPM

Providing and fixing Jaquar make or equivalent Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange including cost of fixing necessary fittings. Registered Design No : ALD-CHR-769L300X190

Providing and fixing Jaquar make or equivalent Waste Coupling 32mm Size Full Thread with 130mm Height including cost of fixing necessary fittings. Registered Design No : ALD-CHR-705L130

Providing and fixing Jaquar make or equivalent Thin Rim Table Top Basin, Size: 495x395x150 mm, Shape - Rectangular including cost of fixing necessary fittings. Registered Design No : JDS-WHT-25909

Providing and fixing Jaquar make or equivalent Metropole Flush Valve Regular 40mm Size (Concealed Body) with Exposed Shut off Provision & Round Flange including cost of fixing necessary fittings. Registered Design No : FLV-CHR-1093N

Providing and fixing Jaquar make or equivalent 2 Way Bib Cock with Wall Flange including cost of fixing necessary fittings. Registered Design No : OPP-CHR-15041PM

Providing and fixing Jaquar make or equivalent Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook including cost of fixing necessary fittings. Registered Design No : ALD-CHR-573

Providing and fixing Jaquar make or equivalent Towel Ring Round with Round Flange including cost of fixing necessary fittings. Registered Design No : ACN-CHR-1121BN

Providing and fixing Jaquar make or equivalent Soap Dish Holder - Chrome including cost of fixing necessary fittings. Registered Design No : ACN-CHR-1131N

Providing and fixing Jaquar make or equivalent Soap Dispenser with Glass Bottle including cost of fixing necessary fittings. Registered Design No : ACN-CHR-1135N

Providing and fixing Jaquar make or equivalent Tumbler Holder - Chrome including cost of fixing necessary fittings. Registered Design No : ACN-CHR-1141N

Providing and fixing Jaquar make or equivalent Toilet Roll Holder with Stainless Steel Flap including cost of fixing necessary fittings. Registered Design No : ACN-CHR-1153S

Providing and fixing Jaquar make or equivalent Towel Rack 600mm Long without Lower Hangers but with 3 hooks, Stainless Steel including cost of fixing necessary fittings. Registered Design No : ACN-CHR-1181FHS

Providing and fixing Jaquar make or equivalent Angular Stop Cock with Wall Flange - Chrome including cost of fixing necessary fittings. Registered Design No : OPP-CHR-15053PM

Providing and fixing Jaquar make or equivalent Rimless Wall Hung WC With UF Soft Close Seat Cover, Hinges, Accessories Set, Size: 390x570x365 mm including cost of fixing necessary fittings. Registered Design No : VGS-WHT-81953UF

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing Jaguar make or equivalent Glass Shelf 600mm Long (Chrome) Registered Design No - ACN-CHR-1171N

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 15 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 20 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 40 mm nominal outer dia Pipes

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. : Twin rubber stopper

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. : 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. : Coupler : 110 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. : Bend 87.5° : 110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. : Shoe (Plain) : 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. : 110 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. : 75 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. : Coupler : 75 mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. : Bend 87.5° : 75 mm bend

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and laying vitrified Parking floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size 450 x450 mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel by welding

Mangalore tiles edging deep to plinth protection with Mangalor e tites including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

White washing with lime to give an even shade : Old work (two or more coats)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

French spirit polishing : Two or more coats on new works including a coat of wood filler.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. : With 2nd class teak wood beading 62X19 mm

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia

Providing and fixing 600x1500 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board : 610x460 mm bowl depth 200 mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. : Granite of any colour and shade : Area of slab over 0.50 sqm

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. : 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Total Impact of GST for the Purpose of CTC

Please Enable Macros to View BoQ information