Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.8 LAccepted-AOC | L1 | Accepted-AOC WORK ORDER ISSUED | |
| 2 | Rejected-Technical | - | Rejected-Technical WORK ORDER ISSUED | |
| 3 | Rejected-Technical | - | Rejected-Technical WORK ORDER ISSUED |
Tender Value
Refer Docs
EMD Value
₹31,650
Closing Date
16 Jul 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER GURUVAYUR DEVASWOM OFFICE
URGENT REPAIR WORK FOR OLD AGE HOME IN KRISHNASAI APPARTMENT
2022_GD_495521_2
E4-5927/2022
Open Tender
Civil Works - Others
Item Rate
45 days
GURUVAYUR
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,500
Yes
₹31,650
Yes
9 Aug 2022
6 Jul 2022
21 Jul 2022
6 Jul 2022
16 Jul 2022
6 Jul 2022
Amount
APPENDIX-A
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
od68761/2022_2023 : Providing PVC uv sheet 3mm thick for Partition and door work including cutting, making and fixing charges etc.complete.
9.7.7.2 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.5mm thick glass pane
10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar
10.25.2 : Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
13.111.2 : Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).
13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
od77577/2022_2023 : Providing and fixing 4 mm thick ACP or equivalent make paneling 12 mm thick, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge.
od77578/2022_2023 : Providing and fixing flat pressed 12 mm thick marine Plywood Conforming IS: 710,to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately):<br>12mm thick
od77583/2022_2023 : Supplying and Fixing Fibre Eave Board
14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
16.83 : Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
od73206/2022_2023 : Providing and laying 80 mm thick factory made cement concrete interlocking paver Block of M-30 Grade using department tile made by block making machine with strong vibratory compaction of approved size,design and shape ,laid in required colour and pattern over and including 50 mm thick compacted bed of 6 mm metal ,filling the joints with fine sand etc.all complete as per the direction of Engineer-in-charge
od73218/2022_2023 : Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
od73401/2022_2023 : Providing and Fixing Pigeon Net with frames,rubber beeding and necessary fittings etc.complete
od75149/2022_2023 : Supplying and Fixing Stainless Steel 304 grade wash basin sink of Size 140 x 45 x 85 cm,<br>30 cm deep bowl and 25 cm splash height at back with 4 nos of Chromium plated tap and necessary pvc pipe <br> connection.Sink made up of 1 mm thick SS plate with suppourting frames and legs with suitable stainless <br> steel tubular sections including nylon boots at bottom of legs etc.complete
od75235/2022_2023 : Providing and Fixing Indoor antislip floor mat of approved Quality as per the direction of Engineer in charge
od75375/2022_2023 : Providing and Fixing Angled Entry Door Threshold Slip Resistant Superior grip of good quality Rubber Mat as per the Direction of Engineer in charge
od75665/2022_2023 : Providing and fixing Non Skid Safety Mat for Indoor tile steps of good Quality as per the Direction of Engineer in charge
od77603/2022_2023 : Providing Good quality Anti skid Rubber Mat of size 76 cm x 34 cm of thickness 3 mm or equivalent size as per the direction of Engineer in charge
od75714/2022_2023 : Providing and fixing good quality stainless steel (304 grade ) Fold easy toilet Surround safety Frame With pin lock as per instruction of Engineer in Charge
od77618/2022_2023 : Providing and Fixing Zebra blinds-31P beige including material labourand fitting(best quality)charges etc.complete
od77619/2022_2023 : Providing and fixing platinum cloth curtain-122 cm wide & 100% Polyfabric Dimout 75 % Sr.no:23 shade 2021 in ripple pleat system in existing pattern including fitting (best quality) and stitching charges and strap etc.complete
od77627/2022_2023 : Labour Engaged as Coolie For yard cleaning
Strokefort infra developers private limited
Sreeni Parameswaran
Bidder Name
sanjay radhakrishnan
Strokefort infra developers private limited
Sreeni Parameswaran
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_714480.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .