Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
8 Jun 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Jal Shakti (PHE) Division Samba
Executive Engineer Jal Shakti (PHE) Division Samba
Please refer BoQ
2024_PHE_248582_6
PHES/06 of 2024-25 Dt. 11/05/2024
Open Tender
Civil Works - Water Works
Item Rate
365 days
Samba
Please refer tender documents
2 documents required · 2 mandatory
₹1,000
Executive Engineer Jal Shakti (PHE) Division Samba
₹10,000
26 Jun 2024
13 May 2024
10 Jun 2024
13 May 2024
8 Jun 2024
13 May 2024
Amount
Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc ( not exceeding 1.5 M in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan ,depth upto 1.5 Mt including disposal of excavated earth upto 1 Mtr from cutting edges, disposed earth to be levelled and neatly dressed in . All kinds of soil.
Earth work in excavation by Mechanical means (Hydraulic excavator) in foundations drains, pipes and cables etc (not exceeding 1.5 M in width or 10 sqm on plan ) trenches including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out excavated soil and disposal of surplus soil as directed within lead of 50 M . All kinds of soil.
Dismentling manualy /Mechanically including stacking of serviceable material and disposal of unserviceable material within 50 Meter lead i) Bituminous road
ii) Water Bound Macadam Road.
Dismantling tile work in floors and roof laid in cement mortar including stacking material with in 50 Meteres lead a) For Thickness of tiles 10 mm to 25 mm
b) For thickness of tiles above 25 mm and upto 40 mm.
Demolishing cement concrete manually/ by mechanical means including disposal of material in with 50 mtrs lead a) 1: 3: 6 or richer mix.
b) 1:4:8 Leaner mix.
Laying and fitting of GI pipes complete excluding cost of pipes and earth work a) 15 mm dia
b) 20 mm dia.
c) 25 mm dia
d) 32 mm dia.
e) 40 mm dia.
f) 50 mm dia.
g) 65 mm dia.
h) i) 80 mm dia ( L )
ii) 80 mm dia ( M )
i) 100 mm dia ( L )
ii)100 mm dia ( M)
Providing and fixing of GI pipes complete with G.I fittings excluding tenching and refilling etc. ( external work) a) 15 mm dia
b) 20 mm dia.
c) 25 mm dia
d) 32 mm dia.
e) 40 mm dia.
f) 50 mm dia.
g) 65 mm dia.
h) i) 80 mm dia ( L )
ii) 80 mm dia ( M )
i) 100 mm dia ( L )
ii)100 mm dia ( M)
ii)150 mm dia ( M)
Fabrication of joints GI/ DI/ MS (complete Job) and involves the following items., Earth work excavation, Cutting of pipes with hack-saw, Refilling of excavated earth 90% Earth work item, Disposal of unserviceable material within 500 m by head load, Demolition of concrete/ Tiles/ Bituminious / WBM a) 25 mm dia to 50 mm dia.
b) 65 mm dia to 100 mm dia.
c) 125 mm dia to 150 mm dia.
d) 200 mm dia.
Dismantling GI pipes (External work) including excavation and refilling after taking out the pipes, manually/ by mechanical means including stacking of pipes with in 50 Mtrs lead., a) 15mm to 40 mm dia nominal bore
b) Above 40 mm nominal bore.
Providing lead caulked joints to spun iron or C.I and specials including testing of joints but including the cost of pig lead a) 100 mm dia.
b) 125 mm dia.
c) 150 mm dia.
d) 200 mm dia.
Filling available excavated earth (excluding rock ) in trenches, plinth sides of foundation etc. Layers not exceeding 20 cm in depth, consolidating each deposited layers lead upto 50 M and lift upto 1.5 M
Disposal of surplus excavated earth complete Job upto 1 Km by Mech Transport ( Carriage)
Chequrred precast cement concrete tiles 22 mm thick in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and clearing etc. complete on 20 mm thick bed of cement mortar 1: 4 (1 cement: 4 coarse sand) excluding cost of tiles. a) Ordinary cement without any pigment,
Supply of Fitter/ Mazdoor/ Mason etc. i) Supply of Fitter ( 2nd class)
ii) Supplyof Labour (Mazdoor)
iii) Supply of Mason a) Ist Class
iv) 2nd Class Mason
Provging Push on joints to centrifugally (spun) cast- Iron pipes or Ductile Iron Pipes including testing including the cost of rubber gasket a) 100 mm dia.
b) 150 mm dia.
c) 200 mm dia.
Laying in position S & S or flanged CI special such as Tees bends, collars, tappers and caps etc (excluding cost of specials).
Locating/ Tracing of blockages/ leakages including excavation of pits.
Carriage of Departmental material from stacking place to site of work average 200 Mtrs by Head Load ( Paid as per actual distance involved at site) a) G.I.Pipe and fitting.
Replacement of C.I sluice valves/Check valves complete with bolts,nuts,rubber insertions etc.(sluice valves/Check valves to be supplied by the Department) 150mm dia
100 mm dia
80 mm dia
65mm dia
50mm dia
Fixing /Replacement of GM Gate valves/Brass stop cocks complete(Gate valves/stop cocks toi be supplied by the department) including bends,collars,unions and other allied items 100mm dia
80mm dia
65mm dia
50mm dia
40mm dia
25mm dia
20mm dia
Making connection of G.I distribution branch with G.I main of following sizes by providing and fixing Tee,including cutting and threading the pipe etc. complete 25 to 40mm nominal bore
50 to 80mm niminal bore
Clearing jungle including uprooting of rank vegetation, grass, brushwood, trees and saplings of girth upto 30 cm measured at height of 1 M above ground level and removal of rubbish upto 1 distance of 50 m outside the periphery of the area cleared.
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion a) Powder coated aluminum (minimum thickness of powder coated 50 microns)
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns)
Providing and fixing ACP Sheet (Paratation) of 4mm thick
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm
Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :125 mm
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work upto plinth level 1:3:6 (1 cement: 3 coarse sand 6 Graded stone aggregate of 20 mm nominal size) (Crushed)
Demolishing dry brick pitching in floors,drains etc. including stacking serviceable material and disposal of unserviceable material with in 50 meters lead
Dry brick on edge flooring with bricks of class designation 75 on a bed of 12mm cement mortar including filling joints with fine sand (1:4mix) ( with F.P.S bricks)
Brick work with common burnt clay FPS (non-modualar) bricks of class designation 75 in foundation and plinth in: a) Cement Mortar 1:4 (1 cement : 4 coarse sand)
Brick work with common burnt clay FPS (non-modualar) bricks of class designation 75 in foundation and plinth in: b) Cement mortar 1: 6 (1 cement: 6 coarse sand)
Half Brick masonry with bricks of class designation 75 in foundation and plinth in:- Cement Mortar 1:4 (1 cement : 4 coarse sand)
Providing and laying in position specified grade of reinforcement cement concrete including curing excluding the cost of centring , shuttering, finishing and reinforcement all work upto plinth level (1: 2: 4) 1. Cement : 2 coarse sand 4 Graded stone aggregate 20mm nominal size)
Providing and laying in position cement concrete excluding the cost of centring , shuttering, finishing all work upto plinth level (1: 4: 8) 1. Cement : 4 coarse sand 8 Graded stone aggregate 40mm nominal size) crushed.
Hand packing stones in wire-crates, excluding cost of crates and stones.
Demolishing Brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. In cement mortar
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 M (stacks of cleaned bricks shall be measured) from brick work in cement mortar,
Slip clearance in soils; mixed with moorum/ kankar/ shingle/ boulders, disposal lead upto 50 M and lift upto 1.5 M
Carriage of sand, Bajri, stones bricks/ tiles from nearest source to site of work incl. loading, unloading and stacking complete (To be paid as per actual distance involved at site) a) Sand average distance 10 Km by MT
b) Bajri above 40 mm average distance 10 Km by M.T.
c) Bajri Below 40 mm average distance 10 KM by M.T.
d) Stones average distance 10 Km by Mech. Transport.
e) Bricks average distance of 10 Km by Mech, transport.
f) Tiles average distance of 10 km by Mech. Transport.
Carriage of material from stacking place to site of work average 200m by Head Load. a) Sand.
b) Bajri below 40 mm.
c) Stone aggregate 40 mm and above.
d) Stones.
e) Bricks.
f) Brick Tiles
Carraige of Alum from site of stacking up to bed of filtration plant by way of engaging labour
Clearance of GSR/ST/Dug well/OHT/Intake Tank by way of deploying labour and disposal of rubbish as per direction of Engineer-in- charge
Providing and laying cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate ) All works upto plinth level
Repair of pipe of different dia incl. cost of material and earth work if required
White washing one or more coat on old work
Welding with Gen Set
6 mm plaster on cement concrete or RCC work with whoite cement based polymer mofified self curing mortar of approved make as per directions of Engineer-In- Charge
Removing white colour wash by scraping and sand papering and preparing the surface smooth incl. necessary repairs to scratches etc. complete.
Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.
Painting with oil type wood preseroative of approved brand and manufacture an old work (one or more coat)
Renewing glass planes with putty and nail wherever necessary incl. taking out old putty float glass panes of thickness 4.0 mm
Repair to plaster thickness 12mm to 20 mm in patches of area 2.5 sqm incl. cutting patches in proper shape and plastering wall surface with white cement polymer self curing incl. disposal of rubbish. All complete
Repair of gate by way of welding and other material required
Earth work filling by JCB
Providing and fixing of check valve: a)100 mm dia
b) 80 mm dia
c) 65 mm dia
Providing and fixing of Sluice valve: a)100 mm dia
b) 80 mm dia
c) 65 mm dia
d) 50 mm dia
Providing and fixing of gun metal gate valve: a) 65 mm dia
b) 50 mm dia
c) 40 mm dia
d) 32 mm dia
e) 25 mm dia
f) 20 mm dia
Repair of rod of sluice valves/ GM Gate valves of different diameters including casting etc. ( The rates quoted must include discount on account of cost of damaged/ unserviceable rod as scrap) A) 40 mm dia
B)50 m dia
c) 65 mm dia
D) 80 mm dia
E) 100 mm dia
Engagement of tractor-trolley water tanker for providing drinking water to water stressed areas including cost of POL, hire charges inclusive of salary of Driver, all toll taxes, token and other taxes applicable.
Support Activity: Awaring people by printing of flexes, recording of Audio, Video song complete Job, for educating people in Samba District, organising seminar and providing refreshment etc complete job for invited people , DDC Chairman, BDC Chairman and all members. Seminar meeting and taking audio video, photography, printing of pamphlet and literature for delivery to the attending audience and oil for generator ( 10 Ltrs.) and hiring vehicle as Jal Rath.Complete job on turn key basis
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .