Up gradation and extension of fire hydrant system installed at 220KV S/s, Mahuakheraganj under 220KV OandM Division, PTCUL, Mahuakheraganj

Complete supply, erection, installation and commissioning of 50 HP 2900 RPM main electric motor with pump set including all accessories, fixtures and fitting etc.

Complete supply, erection, installation and commissioning of 7.5 HP 2900 RPM Jockey motor with pump set.

Complete supply, erection, installation and commissioning of electrical panel consisting of DOL starter, main switch, HRC fuse, indication lamp, fittings etc.

Constuction of RCC pedestals support and foundation for laying fire hydrant pipe line with M.S flat as per civil standard and fixing support base MS plate on top for laying of pipe including cost of material, labor and T&P required for satisfactory completion of work.

Supply, laying and erection of M.S. pipe B class of different sizes including cutting, laying, welding, etc. complete with associate fittings like tees, elbow/bend, socket, flange, nut-bolts, reducers etc.

(a) 200 NB MS Pipe

(b) 150 NB MS Pipe

(c) 100 NB MS Pipe

(d) 80 NB MS Pipe

Supply, installation, testing and commissioning of 1 no. PVC water storage tank for priming the pump sets inside the fire hydrant pump house of capacity 500 liter complete with its fittings and fixtures.

25 NB GI Pipe for priming the pump sets inside the fire hydrant pump house from the PVC water storage tank complete with all fittings and fixtures.

Supply, installation, testing and commissioning of gun metal single headed 63 mm dia hydrant post having 80 NB Butterfly valve complete with standard hose cabinet made out of 18 SWG MS Sheet with 2 nos. of 15 meter long, 63 mm dia hose pipe and 1 no. branch pipe (size of cabinet not less than 600x750x250mm) having central size opening glass door including necessary locking arrangement and painted with red enamel paint complete in all respect as per the direction of engineer in charge.

Supply and fixing of pressure relief valve 50 NB brass/gunmetal make in main pipe line.

Complete supply and installation of following M.S. pipe line accessories with associated fixtures and fittings including valve, strainer, NRV switches and gauges etc.

(a) Sluice/butterfly valve 150 mm dia

(b) Sluice/butterfly valve 100 mm dia

(c) Sluice/butterfly valve 80 mm dia

(d) NRV 150 mm dia

(e) NRV 100 mm dia

(f) Foot valve 150 mm dia

(g) Foot valve 100 mm dia

(h) Pressure Switch

(i) Pressure Gauge

Supply, installation and commissioning of fire hydrant pump house auxiliary equipment’s alarm system with gang assembly of 25 mm dia. connecting with system to indicate the running of system.

Work of shifting of 80 NB pipe line from pump by cutting and dismantling and re-installing/laying of pipe line as per the direction given by the engineer in charge including removing earth form under grounded pipe line, work of cutting, welding, laying and painting cost including man material and T&P'S. complete in all respect.

Work of complete overhauling of existing Hydrant points, cutting out damaged/ rusted portion of pipe , modification /changes in hydrant points as per direction of engineer Incharge including cost of man, material, and T&P required for completing the work satisfactory.( Length 715 mtr, 7 nos of Hydrant point).

Work of painting complete old hydrant pipe line and posts with the one coat of red oxide and 2 coat PO red enamel paint/ epoxy paint of best quality ISI mark make Burger/ Asian paint before application of primer pipe line should be clean by the rubbing with sand paper for removing dust,rust etc, including earth work for removing earth from under ground pipe,cost of man, material, and T&P's required for completing the work satisfactory. (Length Old pipe line 715 meter)

Reinforced cement concrete work in foundation of Jockey pump and main motor pump, as per applicaltion IS including cost ofcentering, shuttering, finishing and rienforcement, 1:1.5:3 (1 Cement : 1.5 Coarse :3 graded stone aggregate 20 mm nominal size) as per direction of Engineer incharge.

Construction of PCC trench for crossing the road and laying undergrounf pipe line having wall size 9 inches and 0.5 meter deep with width of 0.5 meter having RCC trench cover of 200mm with Ms angle frame and iron bar. Ratio of cement mortar in RCC work 1:1.5:3(cement : sand: aggregate) work icludes cutting welding, cost of man, material, and T&Ps required for completing the work satisfactory.

Supply of good quality raputed company make Foam making Branch 5x as per applicable IS

Supply of good quality raputed company make Foam making Branch 10x as per applicable IS

Supply of good quality raputed company make Foam compound as per applicable IS

Supply, installation , testing and commissionning of good quality raputed company make water cum foam monitor 63 mm competed with its assosaries like butterfly valve , fanges, nut bolts etc as per applicable IS as per direction of engineer Incharge including cost of man, material, and T&P required for completing the work satisfactory.

PANCHSHEEL MULSIFIRE REPAIRS PRIVATE LIMITED