Electrical Maintenance works in substations 1,2,3,4 and UPS installations at substations 1,2,3,4, Directors Quarters and SOMS Auditorium in NITC Campus

Amount

Part A: Wiring for light point/ fan point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain with 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch connections etc. as required.

Supply and fixing of box type tube fittings (Batten & T8 LED Tube), complete with side holders and 18/20 watt 4 feet T8 LED tube, Including suitable GI clamp for fixing at an angle of 45 degree. etc, as required.(T8 LED-Bajaj BLRB 18W CW LED, Batten- Bajaj BLRB-DB 118 I, or compatible).

Supply, installation, testing and commissioning of 30 W LED flood light fitting made of pressure die-cast aluminium housing, with heat resistant toughened clear glass and weather proof gasket for LEDs and control gear compartments, IP 66 LED specification make- CREE LED/Equivalent ,colour temp-5700K+300K, System efficiency >110 Lm/W, power factor >95%, driver efficiency >90%.LED Driver with protection against over voltage & short circuit and the surge protection (internal / external - 5kV/10kV). Input AC voltage range 140V-275V, with all accessories complete with connections etc as required 2 years on site warranty ( crompton TRP 415 30 57 SL LM NBK or Equivalent)

Supply and fixing of suitable size 1inch / equivalent size approx 1 metre length GI pipe for fixing streetlight on wall including painting, suitable clamps for fixing with all accessories complete with connections etc as required.

Supplying and fixing 6 - 32 amps rating, 240 Volts, 'C' curve miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connectons, testing and commissioning etc as required.

Supplying of 10 amps rating, 250 Volts, double pole DC 'C' curve miniature circuit breaker.(Legrand or its equivvalent)

Supply,installation,testing and commissioning of 400A 4 pole 50kA MCCB (Merlin Gerin make or its equivalent) with all necessary modification in the existing panel board by dismatling the exixting 4 pole 400 A merlin gerin make MCCB from the panel board. including connections etc as required.

Supply,installation testing and commisioning of multifunction meter MFM 4400 LED Meter CL - 1( L&k make or its equivalent) on the existing panel board by replacing the existing one.including connections etc as required.

Supply,installation testing and commisioning of multifunction meter EM1000H LCD, make Schneider Easy logic or its equivalent on the existing panel board by replacing the existing one..including connections etc as required.

Supply,installation testing and commisioning of 11 kV over current and Earth fault relay MC61A, make L&K or its equivalent on the existing panel board by replacing the existing one..including connections etc as required.

Supply,installation testing and commisioning of meter, L&T make MFM 4410 LED meter CL-1 W/O RS485or its equivalent on the existing panel board by replacing the existing one

Supply of 1.5 sq.mm wire LAAP GREY used for control wiring in panel boards.

Supply of 1.5 Sq.mm Copper fork type Socket.

Supply of HRC Fuse 2A -HF type

Supply of Panel thread Knob

Supply,installation testing and commisioning of DC Voltmeter - (0-50)V,class 0.5 or better on existing panel board by replacing the existing one. including connections etc as required.( L&k or its Equivalent)

Supplying and laying of Elastomer Electrical insulating mat 2.5 for HT. class B(2.5 mm thickness), system voltage 11 kV (IS 15652: 2006)

Supplying and laying of Elastomer Electrical insulating mat 2.5 for LT.class A (2 mm thickness) system voltage 3.3 kV (IS 15652: 2006)

Supply,installation testing and commisioning of AC Analog Voltmeter - (0-600)V, class 0.5 or better on existing panel board by replacing the existing one including connections etc as required.

Supply,installation testing and commisioning of AC Analog Voltmeter - (0-500)V, class 0.5 or better on existing panel board by replacing the existing one..including connections etc as required.

Supply,installation testing and commisioning of HT outgoing breaker Ammeter - (0-150)A,class 0.5 or better on existing panel board by replacing the existing one .including connections etc as required.

Supply,installation testing and commisioning of DC Voltmeter - (0-50)V, class 0.5 or better on existing battery charger / Panel board by replacing the existing one .including connections etc as required.

Supply,installation testing and commisioning of DC Amtmeter - (15-0-15) / (0-15) A ,class 0.5 or better on existing battery charger / Panel board by replacing the existing one .including connections etc as required.

Supplying and fixing 400 A, 36kA rating and breaking capacity and Tripple pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel making connections etc as required.

Supply, Installation, Testing and Commissioning of 3 phase 10kVA UPS and batterries.Detailed specification attached in ANNEXURE III

Supply, Installation, Testing and Commissioning of 3 phase 20 kVA UPS and batterries.Detailed specification attached in ANNEXURE IV

Supply, Installation, Testing and Commissioning of 1 phase, 3 kVA UPS and batterries.Detailed specification attached in ANNEXURE I

Supply Installation and testing and commissioning of 6 kVA UPS and batterries.Detailed specification attached in ANNEXURE II

Supplying and fixing 4 way surface/recess mounting,vertical type,415V,TPN MCB distribution board of sheet steel,dust protected,duly powder painted,inclusive of 200 Atinned copper bus bar,common neutral link,earth bar,din bar for mpounting MCBs( but without MCBs and incomer) as required.

Part B: Comprehensive Annual Maintenance Contract including spares and service and replacement of battery units per annum after guarantee and liability period as per terms and conditions specified in tender document at existing GST rate.

1st Year CAMC charge for the 10kVA UPS

2nd Year CAMC charge for the 10kVA UPS

3rd Year CAMC charge for the 10kVA UPS

1st Year CAMC charge for the 20kVA UPS

2nd Year CAMC charge for the 20kVA UPS

3rd Year CAMC charge for the 20kVA UPS

1st Year CAMC charge for the 3kVA UPS

2nd Year CAMC charge for the 3kVA UPS

3d Year CAMC charge for the 3kVA UPS

1st Year CAMC charge for the 6kVA UPS

2nd Year CAMC charge for the 6kVA UPS

3d Year CAMC charge for the 6kVA UPS

Linsta Services (BID ID -3196257)

POZITIVE POWER INDIA PVT. LTD (BID ID -3196265)