Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.2 LAdmitted-Finance | ₹6.2 L | L1 | Admitted-Finance |
| 2 | L2₹6.3 L+₹10,145.40 (1.64%)Admitted-Finance | ₹6.3 L+₹10,145.40 (1.64%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical BIDDER DID NOT SUBMITTED EPF CHALLAN AS PER NIT |
| 4 | Rejected-Technical | - | - | Rejected-Technical BIDDER DID NOT SUBMITTED HARDCOPY AS PER NIT |
| Sl No | Description | Qty | Unit | Consultive Erectors L1 | SARTHAK ASSOCIATE L2 |
|---|---|---|---|---|---|
| 1.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 12.4 | sqm | 1,000 ₹12,400 | 900 ₹11,160 Lowest |
| 2.00Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : | |||||
| 2.10 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 6.82 | cum | 9,000 ₹61,380 Lowest | 9,500 ₹64,790 |
| 3.00Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | |||||
| 3.10 | Cement mortar 1:4 (1 cement : 4 coarse sand) | 5.32 | cum | 10,000 ₹53,200 | 9,500 ₹50,540 Lowest |
| 4.00Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. | |||||
| 4.10 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | 436.9 | kg | 130 ₹56,797 Lowest | 140 ₹61,166 |
| 5.0012 mm cement plaster of mix : | |||||
| 5.10 | 1:4 (1 cement: 4 fine sand) | 38.2 | sqm | 400 ₹15,280 Lowest | 500 ₹19,100 |
| 6.00Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall | |||||
Tender Value
₹6.3 L
EMD Value
₹12,686
Closing Date
13 Aug 2026, 11:00 amClosed
EXECUTIVE ENGINEER CIVIL I/C
ENGINEERING SECTION, ASSAM UNIVERSITY SILCHAR
Construction of Toilet (1 unit), washing area and provision of Storage unit at GH-4 at Assam University, Silchar, Assam.
2026_AUS_920921_1
AU/ENGG/MAINT/CIVIL/64/2024 (PT-1
Open Tender
Civil Works
Works
25 days
ASSAM UNIVERSITY SILCHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
Assam University Silchar
₹12,686
19 Aug 2026
6 Aug 2026
14 Aug 2026
6 Aug 2026
13 Aug 2026
6 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | - | sqm | 1 | - |
| 2Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : | |||||
| 2.1 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 6.82 | cum | 1 | ₹6.82 |
| 3Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : | |||||
| 3.1 | Cement mortar 1:4 (1 cement : 4 coarse sand) | 5.32 | cum | 1 | ₹5.32 |
| 4Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. | |||||
| 4.1 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | 0.9 | kg | 1 | ₹0.9 |
| 512 mm cement plaster of mix : | |||||
| 5.1 | 1:4 (1 cement: 4 fine sand) | - | sqm | 1 | - |
| 6Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
BOQ_967765.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .