REPAIR/ REPLACEMENT OF INTERNAL WIRING AND ALLIED WORK AT OTM AT YOL CANTT.

Amount

Part-ITaking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including light fiitings any type,switches, sockets, holders, (batten or pendent type), ceiling rose, switch board , bell/buzzer,bell push, tube light fitting ,regulator etc. and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes and all as specified and directed.

Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified.

Point wiring with 1.5 Sqmm copper conductor FRLS (Multi strand) PVC insulated ISI Marked unsheathed cable in and including casing-n-caping medium grade, ISI marked of suitable size with all fittings/ accessories and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FLRS as phase, neutral and earth wire connected to common earth dolly and including concealed pressed steel/ cast iron of suitable sizes terminal boxes made from 1.60 mm thick sheet for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet (Make Hylum or equivalent ISI marked) for one light point or one fan point or one bell point, independent, controlled by one way switch/ push button complete all as specified and directed. Note:-i) Wiring colour code i.e Red/Yellow/Blue for phase , Black for neutral and Green for earth shall be maintained. ii) The wire from switch board to ceiling rose shall be of 2x1.5Sqmm +1x1.5sqmm rates for the same shall deemed to be included in item .

All as per serial item No '03' above, but for one 3 pin 5 Amps socket outlet on the same board all as specified and directed.

All as per serial item No '03' above, but for one 3 pin 5 Amps socket outlet on the independent board, all as specified and directed.

All as per Srl item No. '03' hereinbefore but for 3 pin 15 amps socket out let on independent with 2.5 Sqmm PVC copper conductor cable and PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, all as specified.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified.

Switch piano flush type, single pole, one way, 5/6 Amps, all as specified.

Switch socket outlet Two -in -One 3 pin 5 amps flush type, 230 volts AC multipurpose all as specified.

Switch socket combination 5 Pin, 5 Amp & 15 Amp flush type controlled by one switch, all as specified.

Ceiling fan regulator step type, electronic type varying 5 Speeds 230 Volts, 50Hz, suitable for 1200/ 1400 mm sweep ceiling fans, all as specified.(Makes as mentioned in Appendix 'C').

Ceiling rose, three phase, PVC/Polycarbonate, insulated body, all as specified.

Switch , bell push, flush type, 5 Amps, all as specified.

Bell electric, ding dong AC 230V, single pole, all as specified.

Switch piano flush type, single pole, one way, 5/6 Amps fixed in repair, all as specified.

Switch socket outlet Two -in -One 3 pin 5 amps flush type, 230 volts AC multipurpose fixed in repair, all as specified.

Switch socket combination 5 Pin, 5 Amp & 15 Amp flush type controlled by one switch fixed in repair, all as specified.

Ceiling fan regulator step type, electronic type varying 5 Speeds 230 Volts, 50Hz, suitable for 1200/ 1400 mm sweep ceiling fans fixed in repair, all as specified.(Makes as mentioned in Appendix 'C').

Ceiling rose, three phase, PVC/Polycarbonate, insulated body fixed in repair, all as specified.

Socket outlet Two -in -One 3 pin 5 amps flush type, 230 volts AC fixed in repair, all as specified.

Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 8 way, 240 volts with 200 Amp rated bus bar, all as specified.

Sheet metal enclosures factory made for DBs when MCBs to be used, triple pole and neutral, 4 way, 415 volts with 200 Amp rated bus bar, double door with detachable gland plate, all as specified.

MCB SP 6 to 32 Amp, 240 Volts, 10 KA all as specified. Note:-The connection to the MCBs shall be through thimble/lugs for and rate for the same shall deemed to be included in quoted rates

MCB SPN 6 to 32 Amp, 240 Volts, 10 KA all as specified. Note:-The connection to the MCBs shall be through thimble/lugs for and rate for the same shall deemed to be included in quoted rates

MCB TPN 63 Amp, 415 Volts, 50 Hz, 10 KA all as specified. Note:-The connection to the MCBs shall be through thimble/lugs for and rate for the same shall deemed to be included in quoted rates

Replacement of Sub main wiring with two single core PVC insulated cable 1100 volts grade with copper stranded FRLS conductor of size 6 Sqmm (2 single run) with one continuous FRLS copper earthing lead wire of size 6 Sqmm and drawn into and including surface PVC casing & capping of suitable size with all fittings/ accessories, junction boxes 1 to 4 way 25mm dia and connected to common earth dolly, complete and as directed.Note :- Two run (each run of 1 RM) of 6 sqmm copper conductor and one RM of earth wire of 6 Sqmm, shall be measured as one RM).

Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver all in one fxture, 09 watt LED and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete including taking down old unserviceable. Make:- Havells Cat Part No.LUMILINEBS9WLED865SPCWH or equivalent in makes mentioned in Appx 'C'.

Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver all in one fxture, 18 watt LED and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete including taking down old unserviceable.. Make:- Havells Cat Part No.LUMILINEBS18WLED865SPCWH or equivalent in makes mentioned in Appx 'C'.

EdgePro Round edgepro range of Slim-Fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology 12 Watt. An ideal solution where ceiling voids are limited but high lumen output is required.and making connection with 3 core copper flexible cable of size 23 x .0076 complete including taking down old unserviceable. Make:- Havells Cat Part No.EDGEPRORDDLR12WLED857Sor equivalent in makes mentioned in Appx 'C'.

EdgePro Square edgepro range of Slim-Fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology 12 Watt. An ideal solution where ceiling voids are limited but high lumen output is required.and making connection with 3 core copper flexible cable of size 23 x .0076 complete including taking down old unserviceable. Make:- Havells Cat Part No.EDGEPROSQDLR12WLED857S or equivalent in makes mentioned in Appx 'C'.

LED edge-lit luminaire suitable for armstrong/grid ceiling complete for low ceiling applications of 36 Watt and making connection with 3 core copper flexible cable of size 23 x .0076 complete including taking down old unserviceable. Make:- Havells Cat Part No.STRATO 2X2PLR36WLED857MOD or equivalent in makes mentioned in Appx 'C'.

Taking down ceiling fans//exhaust fan of 1200 /250/300mm sweep of any make/ Model from fan hook/ wall dismentling blade opening of motor for overhauling/servicing , and then properly cleaning alll parts and greasing , oiling of bush & bearings after opening of the fan including reassembling and Painting of ceiling fans/exhaust fan after due preparation complete at site with super enamel synthetic white paint by spray gun including filling cavities with filler, one coat after cleaning all dust etc and writing MES No with black paint and than re-hanging and reconnecting of fan with new flexible cord of suitable size from ceiling rose to connector , complete all as directed by Engineer-in-Charge.

Material and labour for rewinding of ceiling fan of any make/model/sweep including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaing agent, applying slot inslation and rewinding with super enameled insulated copper wire of same gauge / same number of turns as existing and connecting the coil suitable to operate on 230VC, single phase, AC supply including all winding, insulating material and impregnation of insulating varnish as specified of any make, type, model and applying air drying the winding throughly including transportation from site of rewinding 1200/1400 mm sweep , complete all as specified .

1.5/2.5Mfd capacitor for ceiling fan after removing old unserviceable, complete all as specified and as directed.

4 Mfd capacitors for ceiling fan after removing old unserviceable, complete all as specified and as directed.

Replacement of motor suitable for plastic body exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed.

Replacement of motor suitable for metal body exhaust fan of size 300mm sweep and making necessary connection complete all as specified and as directed.

Replacement of ENDURA PEARL , 25 Watt LED, 5700K, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP65 protection and impact resistance of IK07 including connecting up with twin core twisted flexible copper conductor cable with suitable size, including GI bracket of suitable size with clamps all as specified. Make : Havells Cat Part No. ENDURAPEARLSL25WLED757SASYTOPCMP OR equivalent in makes mentioned in Appendix 'C'.

Replacement of blade suitable for plastic body exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed.

Replacement of plastic body suitable for exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed.

Supply and replacement of louvers suitable for plastic body exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed.

Supply and fix modular switch out 16Amps, 1 module Fixed in repair, complete all as specified. Note Modular switches of existing make as per site

Supply and fix modular socket out 6Amps, 2 module Fixed in repair, complete all as specified.Note Modularsocket of existing make as per site

Supply and fix modular socket out 16Amps, 2 module Fixed in repair, complete all as specified.Note Modularsocket of existing make as per site

Supply and fix modular bell push switch of 6Amps, 1 module Fixed in repair, complete all as specified.Note Modular switches of existing make as per site

Supply and fix modular cover plate 2 module Fixed in repair, complete all as specified.

Supply and fix modular cover plate 3 module Fixed in repair, complete all as specified.

Supply and fix modular cover plate 4 module Fixed in repair, complete all as specified.

Supply and fix modular cover plate 6 module Fixed in repair, complete all as specified.

Supply and fix modular metal flush box 4 module Fixed in repair, complete all as specified.

Supply and fix modular metal flush box 6 module Fixed in repair, complete all as specified.

Supply and fix modular metal flush box 8 module Fixed in repair, complete all as specified.

DHANI BUILDERS

vivek and co

M/S VIG AND COMPANY