IMPROVEMENT TO KITCHEN OF CERTAIN MD QTRS IN HAWK AREA AND PROVN OF INTERLOCKING PATH WAY / HARD STANDING AT AFS BIDAR

Amount

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc., laid bedded and pointed in any mortar complete all as specified and as directed .

Granite (of any type) 18-20 mm thick, work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like including in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar locations complete all as specified and as directed.

Glazed coloured ceramic coloured tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles as in skirting/dado including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Demolition of brick work, stone / boulder masonry, precast concrete block masonry etc., built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Brick work with sub class 'B' bricks (old size brick) straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and ascdirected.

Taking down cement plaster on brick or concrete or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of new surfaces of wall and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed.

Preparation of old decorated surfaces of walls including cornices pillars etc by washing, rubbing down stopping and applying one coat of Oil Bound Distemper complete all as specified and as directed.

Preparation of old decorated surfaces of ceilings by washing, rubbing down stopping and applying one coat of Oil Bound Distemper complete all as specified and as directed.

GI tubing 15mm dia medium grade with all fittings and fixed to walls and ceiling or laid in floors including taking down old steel tubing complete all as specified and as directed.

S&F in repairs 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or liad on floors including necessary clamps complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 75mm dia with access door any radius complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.

S & F in repairs 75 mm bore, PVC (SWR) vent cowl complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125mm including setting and jointing with solvent cement etc complete all as specified and directed.

Taking down shutters exc. 1.0 sqm but not exc. 2.0 sqm each complete all as specified and as directed.

Factory made Second class hardwood glazed and skelton door shutters 35mm thick, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, clause 8.24(a) and fitted to chowkats, complete all as specified and as directed.

Preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete, all as specified and as directed.

Aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.

Aluminum aodised sliding door bolts of 300mm long with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Butt Hinges medium weight cold rolled mild steel, 100 mm long complete all as specified and as directed.

Mild steel work as in hold fasts and other similar items conforming to Fe-290 Gde-E-165, complete all as specified and as directed.

M&L for 18/19 mm thick Prelaminated particle board exterior grade, both sides prelaminated with decorative choice lamination , fixed with screws to timber frame work for shutters of ward robes, cabinets etc., complete all as specified and as directed.

M&L second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F auto closing hinges for fixing cabinet doors in kitchen cabinet system with self closing mechanism which allows the cabinet door to close smoothly complete all as specified and as directed.

Teak wood lipping 6mm thick fixed with nails to 18/19mm thick board complete all as specified and as directed.

Aluminium anodized handles fabricated type of extruded section of 75mm long complete all as specified and as directed.

Hasp and staple 100mm long, aluminium anodized including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Aluminum anodised barrel tower bolts of extruded section 75mm long complete all as specified and as directed.

S &F in repairs Stainless steel kitchen sink, made of stainless steel 1 mm thick, with plugs, washers, PTMT waste coupling 38/40mm ( half or full threaded) incluing waste pipe 32mm bore with reducer socket, overall size 495mm X 420mm, bowl size 410mm X 330mm X 160mm complete all as specified and as directed.

Grating doom 100mm dia of stainless steel with hole for waste pipe complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Preparation of old painted steel and iron surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete, all as specified and as directed.

Making hole in granite kitchen cooking platform suitable for gas pipe complete all as specified and as directed.

Surface dressing n exc 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Pre-cast cement concrete block masonry with solid blocks built in 1:3:6 type-C1 concrete (using 20mm graded stone aggregate), exc. 10cm in width and setting in mortar 1:6 complete all as specified and as directed.

PCC 100mm thick 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

Chequered cement concrete tiles 300mm x300m x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Sand for cushioning as under floors of paver blocks , compacted by using plate compactor or other suitable mechanical method etc., complete all as specified and as directed.

Machine pressed pre cast concrete interlocking designer paver blocks with grey cement and pigment in any and shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade in path, hardstanding, etc laid over complete all as specified and as directed. Note :- Sand cushioning shall be measured and paid separately.

PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in kerbs / benching, coping including necessary form work complete all as specified and as directed.

M/s S.L.Chablani

Mr Madhusudhan Kotarki

BHEEMRAO PATIL CONTRACTOR

Siddique constructions

M/s Ateeq Ahteasham

Satish Patpally