PROVN OF KOTA STONE AND CHEQUARED TILES AND CONNECTED WORKS SERVICES IN STAIRCASE AND APPROCH PATH OF CERTAIN SMQS AND CERTAIN MINOR WORKS AT GE AF TRIVANDRUM

Amount

SCHEDULE 'A'

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.

Demoliton of cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 25mm thick PCCtype B-0, 1:2:4 (12.5mm graded stone aggregate) as in floor complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specifeid.

Taking down cement or cement lime plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

M&L for RCC nominal mix Type B0 1:2:4 (12.5mm graded stone aggregate) as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F Mild steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Cutting opening in cement concrete walls (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to be finished even and smooth without using extra cement complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification , complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed.

S&F 150mm size PVC handle for PVC door complete all as specified and directed.

S&F 150mm long PVC barrel tower bolts for PVC door complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar or cement lime mortar and stone wall built in cement mortar or cement lime mortar and wall of cement concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required exc 150 sq cm but not exc 400 sq cm complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

Demolition and breaking up 100mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed.

S&F 50mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F in repair 75 PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe, complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and directed.

S&F in repairs Urinal of size 365x335x670mm show white, complete all as specified and directed. Make: Cera cat No S4020107 or equivalent

S&F self closing angle cock pressmatic for urinal with wall flange and 200mm connection pipe complete all as specified and directed. Make: Cera cat No F9020203 or equivalent ISI marked

S&F in repairs angle valve,, brass, chromium plated for 15mm bore dia pipe complete all as specified and directed. Make : Jaquar/CERA/Prayag or equivalent make

S&F in reparis PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F health faucet , CP with flexible arm for pipe 15mm bore dia complete all as specified and directed. Make: CERA/Jaquar/Prayag or equivalent

S&F in repairs looking mirror of size 700 x 500mm with 5mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection complete all as specified and directed. Make: Modi/Prayag/CERA or equivalent

S&F in repairs stainless steel soap tray fixed with brass screws complete all as specified and directed. Make: Jaquar/CERA/Prayag or equivalent

S&F in repairs Brass chrominium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long completea all as specified and directed.

S&F in repairs bib cock with wall flange and aerator complete all as specified and directed. Make: Jaquar/CERA or equvalent make.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 32mm bore and fixed complete all as specified and directed.

S&F in repairs waste pipe 32mm bore suitable for WHB, urinal etc complete all as specified and directed.

S&F Click clack waste coupling (half thread) 32mm size for WHB and Urinal complete all as specified and directed. Make: Jaquar/Cera/Prayag or equivalent make given

S&F in repairs Self-closing pillar taps, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed to 15mm bore dia pipe complete all as specified and directed.

S&F stainless steel toilet paper holder complete all as specified and directed. Make: Cera/Jaquar/Prayag or equivalent make

S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F 20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F 32mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position exc 500 ltr and not exc 1000ltrs complete all as specified and directed. Note: Cleaning repairing, etc. measured separately.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. exc 500 ltrs and not exc 1000 ltrs complete all as specified and directed..

S&F 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Dismantling of water tank exc 250 ltr and not exc 500 ltrs complete all as specified and directed.

Taking up or down 25 or 32mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC type D2, 1:4:8 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC type B2, 1:2:4 (40mm graded aggregate) as in surface channels and drains complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, complete all as specified and directed.

M&L for providing precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) for manhole cover slab etc complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

M&L for preparation of old painted wall surface and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparation of new plastered wall surface and applying two coat of distemper oil emulsion over a coat of alkali resistance priming paint complete all as specified and directed.

M&L for preparation of old painted ceiling surface and applying one coat of oil emulsion distemper complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed.

S&F 2nd class HW plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F 2nd class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 75mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 100mm size aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (GdeE- 250) quality A, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steelwork of any description not otherwise provided for, complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4.00 sqm each complete all as specified and directed.

M&L for preparation of new plastered wall surface and applying two coats of weather coat paint (APEX) over a coat of primer complete all as specified and directed.

S&F stainless steel work such as baluster, walk ways, railing and similar works with ends of bars shouldered and /or riveted or forged into spikes complete all as specified and directed.

S&F Mild steel work framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exc .18 & not exc. 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L Pre cast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in CM 1:6 type C1 1:3:6 (20 mm grades stone agg) all as specified and directed.

S&F second class hardwood plain fillets, square or rectangular in section, clean swan, secured with nails area exc 13 sq cm and not exc 25 Sqcm complete all as specified and directed.

M&L for 18/19 mm thick Prelaminated MDF decorative choice boards on both sides with lipping allaround fixed with screws and painting to lipping protion to match with lamination as cupboards, drawers, cupboard shutter etc complete all as specified and directed.

M&L for Contineous piano hinges, brassl, bright finish with flaps 40 mm complete all as specified and directed.

S&F mortice locks cupboard, grade 1, size 50mm brass 2 lever complete all as specified and directed.

M&L for Providing precast cement concrete type B1 1: 2: 4 ( 20 mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1: 6 complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length or bent to shape required cranking, bending spirally for hooping for columns, hooking ends and binding with and incluidng mild steel wire (anealed) not less than 0.9 mm dia or securing with clips quality confirming complete all as specified and directed.

S & F PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed by Engineer in charge.

S & FVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repairs stop cock fancy type cast copper alloy (concealed type) 15 mm bore screwed down high pressure, with crutch or butter fly handle screwed both ends forsuitable for PVC pipe or for unions complete all as specified and directed by Engineer in charge.

S&F 15 mm bore Bib tap cast copper alloy CP ,long body suitable for Kitchen sink fancy type chromium plated suitable for PVC pipes complete all as specified and directed by Engineer in charge.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs Wash Basin, Vitreous China (flat back or angle back type) of size 550x400mm , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed by Engineer in charge.

S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, fancy type, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F 50 mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches complete all as specified and directed.

M & L for complete removal of old plastered surfaces of wall and applying two coat of oil emulsion distemper with one coat chalk whitening as preparatory to distemper complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20cm girth complete all as specified and directed.

S&F 20mm bore pipes (LEAD FREE), NB CH-80 SW PVC-U ASTM D-1785 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed. Make : Supreme or equivalent

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing complete all as specified and directed.

S&F 32mm bore pipes (LEAD FREE), NB CH-80 SW PVC-U ASTM D-1785 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed. Make : Supreme of equivalent

Cutting holes into or through brick wall or stone wall built in cement mortar or cement lime mortar, and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required not exc 150 sq cm complete all as specified and directed..

M&L for Powder coated aluminium frame for doors, windows, ventilators or in partition with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified

S&F in repairs Angular stop cock with wall flange complete all as specified and directed. Make: Jaquar cat No KUP-35053PM or equivalent

S&F in repairs Polyamide braided connection pipe 12mm dia, 450mm length complete all as specified and directed.

S&F Toilet roll holder with stainless steel flap complete all as specified and directed. Make: Jaquar Cast No AKP-35753PS or equivalent

S&F waste coupling with ceramic pop-up push type (full thread) 32mm size for urinal complete all as specified and directed. Make: Cera cat No F8050351 or equivalent

S&F Soap dispenser with glass bottle complete all as specified and directed. Make: Jaquar Cat No AKP-35735P or equivalent

S&F in repairs Towel rail 600mm of stainless steel complete all as specified and directed. Make: Jaquar cat No AKP-35711PS or equivalent

S&F in repair 75 PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Taking down 50mm bore PVC pipe of any description complete all as specified and directed.

S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F PVC Rotational moulded polyethylene water storage tanks 3 layered (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F PVC Rotational moulded polyethylene water storage tanks 3 layered (cylindrical vertical with closed top) of 750 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

Dismantling water tanks of capacity exc 500 ltrs and not exc 1000 lts complete all as specified and directed.

S&F PVC globe or gate valve handle type fixed to 32mm dia PVC pipe complete all as specified and directed.

S&F in repair PVC cabinet mirror 250x400mm size complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for cement concrete type C2, 1:3:6 (40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (GdeE- 250) quality A complete all as specified and directed.

Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loose soil, complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC type D2, 1:4:8 (40mm graded stoneaggregate) as in floors complete all as specified and directed.

M&L for road cutting/ scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm and not exc 50mm deep complete all as specified and directed.

M&L for Cement concrete type C2, 1:3:6 (40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for Providing cement concrete type B0, 1:2:4 (12.5mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating ,complete all as specified and directed.

S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

M&L taking down chowkats or frames with shutters (without taking off shutters ) exc. 1.5sqm and n exc. 4 sqm each complete all as specified and directed.

S & F anodized aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S & F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square in exc 0.5 sq.m in each pane complete all as specified and directed.

S&F door closure hydraulically regulated designation No.3 universal type, suitable for door shutters weight between 61 to 80 Kg aluminium (extruded section body) complete all as specified and directed.

S&F mortice lock , vertical type, 100mm 4lever brass body complete all as specified and directed.

M&L Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc. as specified, erected in position and securing runners with holdfast, brackets including cutting of floor making good the same finshes and preparation of new surfaces and applying two coat of syntetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for 12 mm thick toughned glass door with all necessary aluminium channels etching as required shape as in door glass including 02 Nos handle of 600 mm long and fixed with suitable floor spring locking arrangement and pivot in each leaf complete all as specified and directed.

M & L for 12 mm thick toughned glass with all necessary aluminium channels etching as required shape as in door glass including fixing clips as fixed glass complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for Kota stone slab 20-25 mm thick in riser of steps, skirting, landings,dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complet complete all as specified and directed.

M&L for preparing old surfaces of ceiling by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and directed..

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in floors, filling and mass concrete complete all as specified and directed.

M&L Chequered cement concrete tiles ,bullnosed 30cm x 30cm x 22mm thick as in treads , set, jointed and pointed in neat cement slurry with grey cemnt and pigment complete all as specified and directed.

M&L Cement concrete type B1 1:2:4 (20 mm graded aggregate) as in sub base of floors etc complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor ISI Marked drawn through non metallic rigid PVC suitable conduit and accessories concealed in walls/ ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 2 mm modular metal flush box and suitable modular white cover plate with frame for one light / exhaust fan point controlled by one switch and all as specified and directed.

Supply and fix modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix in repairs new energy efficent LED batten 1 x 20 watts 4 feet long CRCA body powder coated white batten type MCL LED type all prewired including connection with twin core flexible PVC 0.5 Sqmm complete all as specified and directed by Engineer in charge.

S&F Exhaust fan complete with accessories 230V 50Hz AC 300mm sweep, 1400Rpm and making suitable hole and necessary plastering and making good the surface for suitable fixing exhaust fan complete all as specified and directed by Engineer in charge. Make : Havells Turbo Force SP or equivalent Crompton/Bajaj

Supply & Fix Ceiling rose surface bakelite with two to three terminals 65x50mm AC 230V complete all as specified and directed.

S & F only SPN 4 way of any size and d capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and directed by Engineer in charge.

Supply and fix only the MCB SP 6 A-32A, 230V,50Hz,AC with repturing capacity 10kA complete all as specified and directed by Engineer in charge. Make- Havells/Legrand/ABB..

Supply and fix only the MCB SPN 20 A , 230V,50Hz,AC with repturing capacity 10kA complete all as specified and directed by Engineer in charge. Make- Havells/Legrand/ABB..

Sub Total of Schedule 'A'

SCHEDULE OF CREDIT

Schedule of Credit (Minus) Rs. 5822.00 B/F from Ser page No.130 & 131. NOTE: Bidder shall insert credit amount as rate Rs. 5822.00 in Green field under Col-5.

Sub Total of Schedule of Credit

mahadeva traders cotractor and suppliers

General Engineering and Constructions

M/s.Rejoy Constructions

Archana Transport

DEFT GROUP ELECTROMECHANICAL

KENZ CONSTRUCTIONS