Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1.9 L
Closing Date
20 Aug 2026, 10:30 pmClosed
Karnataka Power Corporation Limited
Prathibha Rani
Overhauling & Emergency works of Turbine auxillaries of Condenser,Lube oil system & Boiler Feed water system
KPCL/2026-27/PS/WORK_INDENT4271
KPCL/2026-27/PS/WORK_INDENT4271
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Executive Engineer TM1 Office RTPS Raichur
4 documents required · 0 mandatory · 4 optional
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidder shall have experience in Maintenance of Turbine and Auxiliaries of thermal power station of capacity 210MW or above. For which Bidder shall upload a one work order copy.
The intending bidder shall have satisfactorily completed, as a prime contractor at least one similar work such as Overhauling and Emergency works of Turbine auxiliaries of Condenser, Lube oil system and Boiler Feed water system / Turbine control valves system/HPLP bypass system of value not less than Rs. 57.32 Lakhs in the last five years in any thermal power stations of capacity 210MW or above. As proof of this, the bidder shall upload single work order and corresponding work done certificate issued by competent authority. (Work done of previous years shall be given weightage of 10% per year to bring them to the present price level of the financial year in which the tenders are invited).
The intending bidder in his name should have achieved an annual financial turnover of Rs. 229.30 Lakhs, in at least two financial years during the last five years. As a proof of this the bidder shall upload the certified copy of the Profit and Loss account or Turnover certificate duly certified by the charted accountant. (Financial turnover of previous years shall be given weightage of 10% per year to bring them to the present price level of the financial year in which the tenders are invited).
₹2,430
₹1.9 L
12 Aug 2026
12 Aug 2026
22 Aug 2026
18 Aug 2026
Overhauling & Emergency works of Turbine auxillaries of Condenser,Lube oil system & Boiler Feed water system
Repair/Service of MO actuators of size above 300 NB (FW line)
Replacement OF BFP cartridge of model FK-6D-30
Checking of motor & hydraulic coupling alignment/main pump to hydraulic coupling alignment
Booster pump to motor coupling alignment
Changing of mechanical seals: BFP booster pump DE / NDE
Changing of mechanical seals: BFP main pump DE / NDE
Changing of 'o' ring at discharge side of BFP main pump
Changing of 'o' ring at suction side of BFP main pump
Servicing of recirculation valve of BFP
Inspection / replacement of suction & discharge/ side journal/ thrust bearing of BFPs.
Inspection / replacement of oil guards of main pump/ booster pumps
Attending minor works like replacement of 'o' ring/ oil seals & etc if any
Inspection / replacement of fusible plug of hydraulic coupling
Servicing of lube oil coolers/ working oil coolers /seal water coolers
Overhauling of boiler feed pump up to balancing drum
Servicing of BFP Discharge valve
Servicing of BFP Discharge NRV
Overhauling of booster pump of BFP
Inspection/servicing of bearings, mechanical seals of Booster pump of both DE & NDE
Servicing of BFP suction valves.
Cleaning of BFP suction strainer
Overhauling of Hydraulic (Voith) coupling
Servicing of Boiler feed pump type MDG 276 in unit-4
Replacement of Boiler feed pump IN UNIT 2
Attending to condenser tube leakage
Replacement of Zinc anodes
Replacement of Expansion rubber bellow at cooling water outlet line of condenser
Hot well cleaning , inspection of steam space , Inspection of LPT last stage blades, bellows, repair to catcher plate etc., & checking of condenser support springs.
Cleaning of condenser tubes
Cleaning of condenser water boxes & tube plates
Cleaning / inspection and repair if any of Deareator & FST
CRH steam piping to Deareator: Inspection of NRV,size 450 NB
Repairs / replacement settings of hangers supports up to 250mm size
HP heaters: inspection & rectificationof HPH partition plate
HP heaters: attending tube leakages of HPH
HP heaters: replacement of gasket of bottom manhole cover
Replacement of HP Heaters Feedwater Partition Plates
Safety valves servicing
Safety valves setting
Replacement of LPT diaphragm lead sheet
Servicing of JOP discharge line pressure adjusting device
Inspection / cleaning of centrifuge bowl
Servicing of centrifuge unit
Servicing of Turbine oil coolers
Servicing of Portable centrifuge
Draining and cleaning MOT, Cleaning of Bucket Filter and refilling MOT with oil
Cleaning of COT / DOT
MOT bucket filter cleaning
Inspection of contrl oil & Lub oil pipings suppports & dampers adjustments/Repair wherever necessary in turbine Lube oil sys,control oil,trip oil, drain oil lines.
Cleaning of oil purifier unit including MOT gauge glass in Unit-4
Servicing of pneumatic control valves of size up to 150 mm
Servicing of pneumatic control valves of size above 150mm
Overhauling of Feed water inlet/outlet/By pass valves of HP Heaters
Servicing of Extraction block valves
Repair /service of MO actuators of size up to 300NB
Checking of the manual operation, attending minor repairs (repairs without dismantling actuator) and replacement of lubrication of MO actuators.
Cleaning of turbine /BFP filter
Replacement of flange /bonnet gasket (including isolations) upto 100 mm
(At MS,HRH,CRH,turbine pipings, HP/LP heaters ,condensate system,TG oil system, HP/LP bypass system etc., and related works)
Replacement of flange /bonnet gasket above 100 mm to 200 mm(including isolations)
(At MS,HRH,CRH,turbine pipings, HP/LP heaters ,condensate system,TG oil system, HP/LP bypass system etc., and relate...
Replacement of flange /bonnet gasket (including isolations) above 200 mm to 450 mm
(At MS,HRH,CRH,turbine pipings, HP/LP heaters ,condensate system,TG oil system, HP/LP bypass system etc., and relate...
Providing assistance for attending of unforeseen emergency works
Replacement of gland packing of Gate/Globe Valves of size 50 to 300 NB
Inspection/servicing of valves & NRV's: HO/MO/valve size up to 50 mm
Inspection/servicing of valves & NRV's: HO/MO/valve size 50 mm to 250 mm
Servicing of motorized/ hand operated valves & NRV's of sizes 250 mm & above
Replacement of gland packing of valves up to 50 mm
Servicing of MO/HO high pressure valves of Valves of size up to 50 mm
Servicing of MO/HO high pressure valves of Valves of size 65 NB to 100 NB".
Servicing of valves in oil lines of size 1".
Servicing of valves in oil lines of size 2"to 6"
Replacement of valves of size up to 100 mm
Replacement of valves of size above 100 to 250 mm
Replacement of bends/reducers/elbow of water & steam lines per joint, including welder below 100 mm
Attending of small welding cracks in pipes and other welding works
Emergency online Sealing works of High pressure lines upto 200NB
Replacement of LP pipe lines size: upto 150mm
Replacement of LP pipe lines size: 150 mm to 400mm
Replacement of HP pipe lines size: upto 150mm
Replacement of HP pipe lines size: 200 to 300 mm
Replacement of bends/reducers/elbow of water & steam lines per joint, including welder above 100 mm
Providing & painting of epoxy fertile paint/anticorrosive paint
Inspection & replacement of Coupling pads of AOP/JOP/EOPs
Engineering Diploma holder
Consumables ( As per annexure-A)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid documents.doc
Tender Document • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .