SPECIAL REPAIR OF JCOs MESS AT NAVAL BASE KOCHI

Amount

Dismantling single layer MP roofing tiles including ridges all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails all as specified and as directed.

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and as directed.

M & L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling incl anodised Aluminium snap grid of size 605x605 mm and GI hangers 6mm dia upto 1200 mm length all as specified and as directed.

M&L for preparation of new surfaces (Ceiling) applying three coat of oil bound distemper over one coat of primer complete all as specified and as directed .

M & L for two coats of creosoting to tiles battens any size and spacing prepared and treated all over (measured overall on oneside only, spaces not deducted) complete all as specified and as directed .

M & L for 2nd class hard wood weather boarding, clean sawn, plain, 20mm thick or feather edged 20mm and fixed with 30mm laps etc complete all specified and as directed .

S&F pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified and as directed .

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified and as directed.

M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and ; fixed with angle cleats or other connecting plates all as specified and as directed.

S&F Framed work (Fe-410-W (Gde-E-250) quality-A) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering , doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L cement concrete type D-2, 1:4:8 using (40mm graded stone aggregate) 100mm thick as in sub base flooring. complete all as specified and as directed.

M&L 25 mm thick cement concrete type BO 1:2:4 using 12.5 mm graded stone aggregate as in below tiling complete all as specified and as directed.

M&L for light shade vitrified cermaic tiles 10mm thick square area of each tile n.exc. 0.36 Sqm in floors etc set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade laid over 15 mm thick screed in CM 1:6 complete all as specified and as directed.

M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 but n. exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 15mm thick screed bed of CM 1:6 all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 300x200x7 mm thick in vertical surface set and joint in neat cement slurry and pointed in white cement or coloured cement to match the shade over 10 mm thick rendering CM 1:4 all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed in CM1:6 complete all as specified and as directed.

M & L hard core of broken stone of gauge n.exc 63 mm, deposited, spread and leveled in layers n.exc 15 cm thick watered and rammed to a true surfaces complete all as specified and as directed.

M & L PCC 1:3:6 type C2 using 20mm graded stone aggregate, 75mm thick, as in plinth protection, path, pavings etc incl making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

Taking down cement plaster on brick walls etc incl raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed .

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6, including finishing even and smooth without using extra cement, complete all as specified and as directed .

M&L for applying two coats of distemper oil emulsion on new/old wall surfaces and including treating with 3mm thick wall care putty and a coat of primer, white or tinted complete all as specified and directed

M&L for 15mm thk cement plaster with cement mortar 1:4 finished even and smooth with out using extra cement complete all as specified and as directed .

Preparation of new plastered surfaces of external wall and applying 2 coat of Apex Ultima Protek system of Asian paint or equivalent of Berger/Nerolac/ Dulux over a coat of antifungal primer duly applied through company authorised applicator or under company supervision using modern tools and techniques all as specified and as directed . Note :- contractor shall submit performance Guarantee for period of five years complete all as specified.

Demolition of Brick work built in Cement mortar complete aii as specified and as directed .

M&L for precast cement concrete block masonry type B1, 1:3:6 (20 mm graded aggregate) with solid blocks exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for granite slab 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement admixture of pigment to match the sade of granite stone including grinding and polishing such as steps, platform, counter and other similar work including screed bed or bedding layer of mortar 15mm thick in cm 1:4 complete all as specified and directed

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed .

M & L for reinforced cement concrete Type B1 1:2:4 (20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete in all as specified

S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No.32 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

S&F in repair water closet pedestal vitreous china white pattern (EWC) including white colour seat cover and connection to drain and to flush pipe & fixing bolts etc complete all as specified and as directed. Make-Parry ware (Cat No-C847H White colour) or equivalent of Cera /Hindware

S & F in repair towel rail stainless steel 60cm length complete all as specified and directed . Make-Parry ware (Cat No - T6008A1) or equivalent of Cera /Hindware

S & F for corner Shelf with stainless steel railing complete all as specified and directed . Make-Parryware (Cat No - T6010A1)

S & F for Mirror Shelf with stainless steel railing complete all as specified and directed . Make-Parry ware (Cat No - T6009A1) or equivalent of Cera /Hindware

S & F for Soap dispenser including glass platform complete all as specified and directed. Make-Parryware (Cat No - T6706A1) or equivalent of Cera /Hindware

S&F in repairs Counter Top Basin (Self- Rimming) for hand wash white flat back of size 550X 445mm (Parryware Leeds, CAT No. C0431 Counter Top) fixed or laid on granite platform including necessary fitting complete all as specified and as directed . Make-Parryware /Cera /Hindware

S&F in repair Pillar cock fancy type brass CP coated complete all as specified. Make-Parryware, CAT No.-G2020A1GF or equivalent of Cera /Hindware

S&F in repairs vitreous china urinals coloured half stall type including all fittings complete all as specified and as directed.

S&F in repairs CP push cock screwed down, screwed for iron pipe of brass ferrule and fixed 15 mm bore complete all as specified and as directed.

S&F in repairs PTMT urinal spreader of any colour suitable for 15 mm bore fixed with urinal including CP pipe complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and as directed.

Supply only 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets all as specified and directed.

S&F hand shower (health faucet) with 8 mm dia 1 Mtr long flexible tube and wall hook (Make Prayag Cat Pat No: BEA-81) all as specified and directed.

S&F in repair of PVC (SWR) pipe 75mm dia fixed on wall/floor single socketed in any length with rubber rings joints including removal of old damaged pipe in any position complete all as specified and directed .

S&F of PVC (SWR) bend any radius of 75mm dia all as specified and directed

Taking down door/ windows chowkats exc 1.5 Sqm and n. exc. 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed ..

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed .

S&F 2nd class hard wood, 35mm thick factory made door shutters plain framed, panelled shutter with lock rail and panel of 12mm thick veneered water proof particle board the size of rails and stile as per IS -1003 klin seasoned and chemically pressure treated complete all as specified and as directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, in opening complete all as specified and as directed.

S&F factory made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:) with wood free EPS, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and as directed.

S&F 150 mm long aluminium handle cast type anodized complete all as specified and directed.

S&F 100mm size, butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F Anodised aluminium window and ventilator shutters, top hung type without sash bars, aluminium sections weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S& F Powder coated anodised aluminium door shutters side hung type, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, neoprene packing, screws, aanodised aluminum fitting such as handles 2 Nos and 4 Nos hinges in each shutter, tower bolt 150mm long two nos, etc complete all as specified.

S&F 4 mm thick, sheet glass, ordinary quality and glazing with oil putty /beeding in squares not exceeding 0.5 sqm each pane for fixing to aluminium/wooden joinery work complete all as specified.

Pre-laminated particle board 9 mm thick, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, ISI marked (IS:12823) fixed as panels in almn/wooden joinery etc., complete all as specified and directed.

S & F 18/19 mm thick, Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to wall/timber frame work as in pelmet boxes / cupboard and similar work etc, and including 6 mm thick teak wood lipping on exposed edges complete all as specified. Make: ARCHIDLAM/ NOVOPAN/DECO BOARD/KITLAM.

S&F aluminium anodised DECO grill 10mm thk, DG 104 fixed with necessery U/F/H channel etc complete all as specified and as directed

S&F aluminium extruded section body door closer, hydraulically regulated, designation No. 3, universal type suitable for door shutters of weight between 61 to 80 Kg with aluminium (die cast) body, complete all as specified and directed .

M/L preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed .

M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic on wall except beam, colum and RCC roof and chases cutting incl white cover plate with frame ,metal flush boxes suitable for modular switches incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light/fan/bell point controlled by one switch etc.complete all as specified and directed .

All as per item No 72 above but for one 5 pin 5 amps socket outlet an independent board.

All as per item No 72 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed .

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed .

S&F Socket, 6A - 3 pin 2 module, complete all as specified and directed .

S&F Socket, 6A/16A - 3 pin combined 2 module, complete all as specified and directed .

S&F Fan step regulator, 120W - 2 module ,complete all as specified and directed .

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals ,complete all as specified and directed .

Taking down old Ceiling fan/exhaust fan from existing position including all connection and deposited to MES store all as directed.

S&F Ceiling fan 1200 mm sweep, 230 V,SP complete with suitable size down rod which ever be reqd at site. Cat Part No. ENVIRO VX of Vguard/cat part No. Energion HS-5 of Crompton/ Cat part No.Eneria -32 of Usha

S&F exhaust fan 300mm sweep ,230V,metallic range with louver including all connection all as specified and as directed.Cat part No SHOVAIR M12 of Vguard/Cat part No. Tran Air 12 of Crompton/ Cat Part No.Freshee MK -II of Usha

S&F LED reccess mounted light maximam wattage of 40W including all connections all as specified and directed by Engineer in charge. Cat Part No. CDR-216-40-57-SLNWH of Crompton/Cat Part No. RC3BOBLED25S-6500G4L600SUOD of Philips / Cat Part No. SLEDLR-30-Stellar Pro XX of Surya .

S&F non integral flexible LED striplight of length 5 mtr with suitable driver including all connection all as specified and as directed.Cat Part No. LS---WW- & L- (Driver) of Wipro/Crompton/Philips

S&F LED spot light(wall washer) of 12W COB type including all connections all as specified and directed . Cat Part No. LD98-181-024-40-XX of Wipro/ Cat Part No.CDR-212-12-40-SL-NWH of Crompton/ Cat Part No.59326 of Philips

S&F 07W LED mirror light fitting with tube and provided with high output diffuser including all electrical connection all as specified and dirceted .Cat part no LCL-07-CDL of crompton/Cat Part No. BOIAGJKNTC of Philips/ Cat Part No.LGLZ01X010XC of Jaguar.

S&F Sheet metal enclosures with socket plug top and MCB' single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB all as specified and dirceted .

M&L for sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLSH copper conductor multistranded cable drawn in and including PVC concealed conduit including one run of 4 Sqmm multi stranded copper conductor cable for earth condinuity wire including taking down old submain wiring all as specified and dirceted . Note : Two runs of PVC cable 4 sqmm and one run of 4 sqmm earth condinuity conductor cable as earth continuity wire and pvc conduit will be measured as one unit length.

All as per Item No. 89 above but with 2 runs of 6 Sqmm PVC insulated FRLSH copper conductor, multistranded cable drawn in PVC concealed conduit and 1 run of 6 Sqmm multistranded copper conductor cable for earth continuity wire . Note : Two runs of PVC cable 6 sqmm and one run of 6 sqmm earth condinuity conductor cable as earth continuity wire and pvc conduit will be measured as one unit length.

S&F Sheet metal enclosure SPN DB when MCB's to be used 12 way with 200 amps bus bar double door including taking down old DB all as sopecified and as directed

S&F MCB SPN upto 32A 'B ' curve 220-240 Volt,50 Hz, all as specified and dirceted . Cat Part No. 811034 of Indoasian/ Cat Part No. BB 20320B of L&T/ Cat Part No. CSMBSIB 32N of C&S .

S&F MCB SP upto 32A 'B' curve 220-240 Volt ,50 Hz all as specified and dirceted. Cat Part No. 811015 of Indoasian/ Cat Part No. BB10320B of L&T / Cat part No. CSNBSIB32 of C&S.

S&F MCCB 4 pole 40 A 16kA ,415V,50Hz with enclosure including all connection all as specified and as directed. Cat Part No. 830018 of Indoasian/ Cat Part No. CM90S1800GO of L&T/Cat Part No.420032 of Legrand/Cat Part No. CSEIK 160 FTMIP of C&S.

Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounted from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electorde connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as prrotection pipe for GI wire connected main controll board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel,wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion including taking down old one.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty ) 1100 Volts grade with stranded aluminium conductor of size 4 core 16Sqmm all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty ) 1100 Volts grade with stranded aluminium conductor of size 2 core 6 Sqmm all as specified and as directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr in depth in loose/soft soil for laying of UG cables etc all as specified and as directed.

All as per Item No.97 above but in soft /disintegrated rock

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm for soil all as specified and as directed.

Removing excavated materials n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point for soil all as specified and as directed.

M&L for Sand ( river sand ) cushioning for under ground cable protection complete provided with layers 8 cm thick before laying the cable in trenches and 15 CM after laying the cable all as specified.

Supplying and laying reinforced precast concrete cable cover, Class LV, type 1 flat, size 250 mm x 150mm x 40mm all as specified and as directed.

M&L for Cement concrete in foundations, type C2 1:3:6, 40mm grade aggregate filling and mass concrete all as specified and as directed.

M&L for Cement concrete in foundations, type B1 1:2:4 20mm grade aggregate filling and mass concrete all as specified and as directed.

Supply and laying GI tubing light for cable protection grade of size 25 mm complete with all fittings all as specified and as directed.

S&F in repairs LED bollard light of max wattage 8W lumen output 560 LM with IP 65 protection including all connection all as specified and as directed.Cat part no CRLA11008HP57-08 of Wipro / Cat Part No.LBLSR-10_WW of Crompton/ Cat Part No. BCP151LEDISO/WWPSU 220-240 V 7043 of philips

Supply & fix stop valve (angle type) cast copper alloy high pressure,screwed for 15mm dia CP fancy type (Half turn) including taking down old fittings etc cmplete all as specified and as directed .Make:-CERA/JAGUAR/HINDWARE

Supply & fix of concealed stop cock(half turn) with sliding flange CP fancy type of size 15mm including taking down old fittings etc cmplete all as specified and as directed .Make:-CERA/JAGUAR/HINDWARE

Supply & fix of bib cock long body chromium plated with flange and aerator CP fancy type of size 15mm including taking down old fittings etc cmplete all as specified and as directed . Make:-CERA/JAGUAR/HINDWARE

Supply & fixing of swivel shower of PTMT any colour with shower arm 15 mm size,195mm long with bend of 45 degree with flange of PTMT including taking down old fittings etc cmplete all as specified and as directed . Make:-CERA/JAGUAR/HINDWARE

Supply & fixing of low density polythene pipe 16mm dia (outer),450 mm long for normal water and taking down old one complete with brass union on both sides to suit 15mm GI pipe.

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11& plain SDR 11 fittings including taking down old pipe etc cmplete all as specified and as directed .

S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings including taking down old pipe etc cmplete all as specified and as directed.

Supply and fix in repairs Ball brass valves (PTMT) of size 25 mm dia high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule including taking down old fittings etc cmplete all as specified and as directed .

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 litre hoisted and fixed in position including taking down old tank etc cmplete all as specified and as directed .

S&F CPVC pipe 32 mm dia SDR 13.5 & plain SDR 11 in trenches including all fittings including taking down old pipe etc cmplete all as specified and as directed . .

S&F CPVC pipe 25 mm dia SDR 13.5 & plain SDR 11 on walls/ ceiling or laying in floors with all fittings including taking down old pipe etc cmplete all as specified and as directed . .

K.V.GEORGE AND COMPANY

ELLIKKAL ENTERPRISES

M/s ANTONY THOMAS AND CO